- 15 Feb, 2016 35 commits
-
-
Sachin Kulkarni authored
[ Upstream commit 4fa11ec7 ] During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Cc: stable@vger.kernel.org Signed-off-by:
Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Yang Shi authored
[ Upstream commit 92e788b7 ] As previously reported, some userspace applications depend on bogomips showed by /proc/cpuinfo. Although there is much less legacy impact on aarch64 than arm, it does break libvirt. This patch reverts commit 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo"), but with some tweak due to context change and without the pr_info(). Fixes: 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo") Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Alan Stern authored
[ Upstream commit e50293ef ] Commit 8520f380 ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Alexandru Cornea <alexandru.cornea@intel.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 6c55d9b9 ] Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by:
Leif Liddy <leif.liddy@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Matt Fleming authored
[ Upstream commit 74256377 ] There are a couple of nasty truncation bugs lurking in the pageattr code that can be triggered when mapping EFI regions, e.g. when we pass a cpa->pgd pointer. Because cpa->numpages is a 32-bit value, shifting left by PAGE_SHIFT will truncate the resultant address to 32-bits. Viorel-Cătălin managed to trigger this bug on his Dell machine that provides a ~5GB EFI region which requires 1236992 pages to be mapped. When calling populate_pud() the end of the region gets calculated incorrectly in the following buggy expression, end = start + (cpa->numpages << PAGE_SHIFT); And only 188416 pages are mapped. Next, populate_pud() gets invoked for a second time because of the loop in __change_page_attr_set_clr(), only this time no pages get mapped because shifting the remaining number of pages (1048576) by PAGE_SHIFT is zero. At which point the loop in __change_page_attr_set_clr() spins forever because we fail to map progress. Hitting this bug depends very much on the virtual address we pick to map the large region at and how many pages we map on the initial run through the loop. This explains why this issue was only recently hit with the introduction of commit a5caa209 ("x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down") It's interesting to note that safe uses of cpa->numpages do exist in the pageattr code. If instead of shifting ->numpages we multiply by PAGE_SIZE, no truncation occurs because PAGE_SIZE is a UL value, and so the result is unsigned long. To avoid surprises when users try to convert very large cpa->numpages values to addresses, change the data type from 'int' to 'unsigned long', thereby making it suitable for shifting by PAGE_SHIFT without any type casting. The alternative would be to make liberal use of casting, but that is far more likely to cause problems in the future when someone adds more code and fails to cast properly; this bug was difficult enough to track down in the first place. Reported-and-tested-by:
Viorel-Cătălin Răpițeanu <rapiteanu.catalin@gmail.com> Acked-by:
Borislav Petkov <bp@alien8.de> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=110131 Link: http://lkml.kernel.org/r/1454067370-10374-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Samuel Thibault authored
[ Upstream commit 327b882d ] Commit f79b0d9c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>") broke the port information in the speakup driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included, and no other header includes asm/serial.h. We here make sure serialio.c does get the arch-specific definition of SERIAL_PORT_DFNS from asm/serial.h, if any. Along the way, this makes sure that we do have information for the requested serial port number (index) Fixes: f79b0d9c ("staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>") Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: stable <stable@vger.kernel.org> # 3.18 Signed-off-by:
-
Rob Clark authored
[ Upstream commit 96c5d076 ] Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>. Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 7ee96216 ] ALSA dummy driver can switch the timer backend between system timer and hrtimer via its hrtimer module option. This can be also switched dynamically via sysfs, but it may lead to a memory corruption when switching is done while a PCM stream is running; the stream instance for the newly switched timer method tries to access the memory that was allocated by another timer method although the sizes differ. As the simplest fix, this patch just disables the switch via sysfs by dropping the writable bit. BugLink: http://lkml.kernel.org/r/CACT4Y+ZGEeEBntHW5WHn2GoeE0G_kRrCmUh6=dWyy-wfzvuJLg@mail.gmail.comReported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jann Horn authored
[ Upstream commit 103502a3 ] Before this patch, a process with some permissive seccomp filter that was applied by root without NO_NEW_PRIVS was able to add more filters to itself without setting NO_NEW_PRIVS by setting the new filter from a throwaway thread with NO_NEW_PRIVS. Signed-off-by:
Jann Horn <jann@thejh.net> Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Milo Kim authored
[ Upstream commit 49f34134 ] Atmel AIC has common structure for SMR (Source Mode Register). bit[6:5] Interrupt source type bit[2:0] Priority level Other bits are unused. To update new priority value, bit[2:0] should be cleared first and then new priority level can be written. However, aic_common_set_priority() helper clears source type bits instead of priority bits. This patch fixes wrong mask bit operation. Fixes: b1479ebb "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers" Signed-off-by:
Milo Kim <milo.kim@ti.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Nicholas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org #v3.17+ Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.comSigned-off-by:
-
Peter Hurley authored
[ Upstream commit f4f9edcf ] As the function documentation for tty_ldisc_ref_wait() notes, it is only callable from a tty file_operations routine; otherwise there is no guarantee the ref won't be NULL. The key difference with the VT's paste_selection() is that is an ioctl, where __speakup_paste_selection() is completely async kworker, kicked off from interrupt context. Fixes: 28a821c3 ("Staging: speakup: Update __speakup_paste_selection() tty (ab)usage to match vt") Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Peter Hurley authored
[ Upstream commit 6d27a63c ] Although n_tty_check_unthrottle() has a valid ldisc reference (since the tty core gets the ldisc ref in tty_read() before calling the line discipline read() method), it does not have a valid ldisc reference to the "other" pty of a pty pair. Since getting an ldisc reference for tty->link essentially open-codes tty_wakeup(), just replace with the equivalent tty_wakeup(). Cc: <stable@vger.kernel.org> Signed-off-by:
-
Peter Hurley authored
[ Upstream commit 5c17c861 ] ioctl(TIOCGETD) retrieves the line discipline id directly from the ldisc because the line discipline id (c_line) in termios is untrustworthy; userspace may have set termios via ioctl(TCSETS*) without actually changing the line discipline via ioctl(TIOCSETD). However, directly accessing the current ldisc via tty->ldisc is unsafe; the ldisc ptr dereferenced may be stale if the line discipline is changing via ioctl(TIOCSETD) or hangup. Wait for the line discipline reference (just like read() or write()) to retrieve the "current" line discipline id. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alan Stern authored
[ Upstream commit 13b43891 ] Runtime suspend during driver probe and removal can cause problems. The driver's runtime_suspend or runtime_resume callbacks may invoked before the driver has finished binding to the device or after the driver has unbound from the device. This problem shows up with the sd and sr drivers, and can cause disk or CD/DVD drives to become unusable as a result. The fix is simple. The drivers store a pointer to the scsi_disk or scsi_cd structure as their private device data when probing is finished, so we simply have to be sure to clear the private data during removal and test it during runtime suspend/resume. This fixes <https://bugs.debian.org/801925>. Signed-off-by:
Paul Menzel <paul.menzel@giantmonkey.de> Reported-by:
Erich Schubert <erich@debian.org> Reported-by:
Alexandre Rossi <alexandre.rossi@gmail.com> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Gavin Shan authored
[ Upstream commit 7e56f627 ] In eeh_pe_loc_get(), the PE location code is retrieved from the "ibm,loc-code" property of the device node for the bridge of the PE's primary bus. It's not correct because the property indicates the parent PE's location code. This reads the correct PE location code from "ibm,io-base-loc-code" or "ibm,slot-location-code" property of PE parent bus's device node. Cc: stable@vger.kernel.org # v3.16+ Fixes: 357b2f3d ("powerpc/eeh: Dump PE location code") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Mika Penttilä authored
[ Upstream commit 57adec86 ] Calling apply_to_page_range with an empty range results in a BUG_ON from the core code. This can be triggered by trying to load the st_drv module with CONFIG_DEBUG_SET_MODULE_RONX enabled: kernel BUG at mm/memory.c:1874! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 3 PID: 1764 Comm: insmod Not tainted 4.5.0-rc1+ #2 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc9763b8000 ti: ffffffc975af8000 task.ti: ffffffc975af8000 PC is at apply_to_page_range+0x2cc/0x2d0 LR is at change_memory_common+0x80/0x108 This patch fixes the issue by making change_memory_common (called by the set_memory_* functions) a NOP when numpages == 0, therefore avoiding the erroneous call to apply_to_page_range and bringing us into line with x86 and s390. Cc: <stable@vger.kernel.org> Reviewed-by:
Laura Abbott <labbott@redhat.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Mika Penttilä <mika.penttila@nextfour.com> Signed-off-by:
-
Lucas Tanure authored
[ Upstream commit 07905298 ] The return type "unsigned int" was used by the get_formation_index function despite of the aspect that it will eventually return a negative error code. So, change to signed int and get index by reference in the parameters. Done with the help of Coccinelle. [Fix the missing braces suggested by Julia Lawall -- tiwai] Signed-off-by:
Lucas Tanure <tanure@linux.com> Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by:
-
Guillaume Fougnies authored
[ Upstream commit 5a4ff9ec ] TEAC UD-501/UD-503/NT-503 fail to switch properly between different rate/format. Similar to 'Playback Design', this patch corrects the invalid clock source error for TEAC products and avoids complete freeze of the usb interface of 503 series. Signed-off-by:
Guillaume Fougnies <guillaume@eulerian.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 462b3f16 ] Some architectures like PowerPC can handle the maximum struct size in an ioctl only up to 13 bits, and struct snd_compr_codec_caps used by SNDRV_COMPRESS_GET_CODEC_CAPS ioctl overflows this limit. This problem was revealed recently by a powerpc change, as it's now treated as a fatal build error. This patch is a stop-gap for that: for architectures with less than 14 bit ioctl struct size, get rid of the handling of the relevant ioctl. We should provide an alternative equivalent ioctl code later, but for now just paper over it. Luckily, the compress API hasn't been used on such architectures, so the impact must be effectively zero. Reviewed-by:
Mark Brown <broonie@kernel.org> Acked-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
John Ernberg authored
[ Upstream commit 4152b387 ] In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by:
John Ernberg <john.ernberg@actia.se> Fixes: 1941138e ("USB: added support for Cinterion's products...") Cc: stable <stable@vger.kernel.org> # v3.9: 8ff10bdbSigned-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
[ Upstream commit e03cdf22 ] Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by:
Harald Linden <harald.linden@7183.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit da10816e ] ALSA OSS sequencer spews a kernel error message ("ALSA: seq_oss: too many applications") when user-space tries to open more than the limit. This means that it can easily fill the log buffer. Since it's merely a normal error, it's safe to suppress it via pr_debug() instead. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 59915133 ] ALSA sequencer OSS emulation code has a sanity check for currently opened devices, but there is a thinko there, eventually it spews warnings and skips the operation wrongly like: WARNING: CPU: 1 PID: 7573 at sound/core/seq/oss/seq_oss_synth.c:311 Fix this off-by-one error. Reported-by:
-
Daniele Palmas authored
[ Upstream commit ff4e2494 ] This patch adds support for two PIDs of LE922. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Vladis Dronov authored
[ Upstream commit cb323213 ] The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f ("USB: visor: fix initialisation of UX50/TH55 devices") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit cac9b50b ] Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Peter Dedecker authored
[ Upstream commit f487c54d ] Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by:
Peter Dedecker <peter.dedecker@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Du, Changbin authored
[ Upstream commit d8f00cd6 ] In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by:
Du, Changbin <changbin.du@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit e912e685 ] This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by:
Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by:
-
Lu Baolu authored
[ Upstream commit ffdb1e36 ] For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by:
Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 19454462 ] In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by:
Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by:
-
Josh Boyer authored
[ Upstream commit 6b31de3e ] Like the Yoga 900 models the Lenovo Yoga 700 does not have a hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing the wifi breakage. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1295272 Tested-by: <dinyar.rabady+spam@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit f71c882d ] Like some of the other Yoga models the Lenovo Yoga 900 does not have a hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. This commit adds the Lenovo Yoga 900 to the no_hw_rfkill dmi list, fixing the wifi breakage. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1275490 Cc: stable@vger.kernel.org Reported-and-tested-by:
Kevin Fenzi <kevin@scrye.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Insu Yun authored
[ Upstream commit 2c3033a0 ] In acpiphp_enable_slot(), there is a missing unlock path when error occurred. It needs to be unlocked before returning an error. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tariq Saeed authored
[ Upstream commit 4f33f6c5 ] Commit be0c37c9 (MIPS: Rearrange PTE bits into fixed positions.) defines fixed PTE bits for MIPS R2. Then, commit d7b63141 (MIPS: pgtable-bits: Fix XPA damage to R6 definitions.) adds the MIPS R6 definitions in the same way as MIPS R2. But some R6 #ifdefs in the later commit are missing, so in this patch I fix that. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12164/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
- 10 Feb, 2016 5 commits
-
-
Nicholas Bellinger authored
[ Upstream commit 26a99c19 ] This patch is a iscsi-target specific bug-fix for a dead-lock that can occur during explicit struct se_node_acl->acl_group se_session deletion via configfs rmdir(2), when iscsi-target time2retain timer is still active. It changes iscsi-target to obtain se_portal_group->session_lock internally using spin_in_locked() to check for the specific se_node_acl configfs shutdown rmdir(2) case. Note this patch is intended for stable, and the subsequent v4.5-rc patch converts target_core_tpg.c to use proper se_sess->sess_kref reference counting for both se_node_acl deletion + se_node_acl->queue_depth se_session restart. Reported-by:
: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Josh Boyer authored
[ Upstream commit edde316a ] One of the newest ideapad models also lacks a physical hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. Fix it by adding this model to the DMI list. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1286293 Cc: stable@vger.kernel.org Signed-off-by:
-
Vinit Agnihotri authored
[ Upstream commit fbbeb863 ] The current code is problematic when the QP creation and ipoib is used to support NFS and NFS desires to do IO for paging purposes. In that case, the GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory situations. This fix adds support to create queue pair with GFP_NOIO flag for connected mode only to cleanly fail the create queue pair in those situations. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mike Marciniszyn authored
[ Upstream commit 09dc9cd6 ] The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0 [1750924.568035] [<ffffffff811bd214>] vfs_write+0xb4/0x1f0 [1750924.568035] [<ffffffff811bdc49>] SyS_write+0x49/0xa0 [1750924.568035] [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 <f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP <ffff88007af1dd70> [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Cc: <stable@vger.kernel.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Jean Delvare authored
[ Upstream commit fd7f6727 ] I don't think it makes sense for a module to have a soft dependency on itself. This seems quite cyclic by nature and I can't see what purpose it could serve. OTOH libcrc32c calls crypto_alloc_shash("crc32c", 0, 0) so it pretty much assumes that some incarnation of the "crc32c" hash algorithm has been loaded. Therefore it makes sense to have the soft dependency there (as crc-t10dif does.) Cc: stable@vger.kernel.org Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
