Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

UVD, VCE and SOC clocks need to be taken into consideration. Also, the
thresholds need be updated correspondingly when stable power state is selected.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

UVD, VCE and Socclk also need to be taken into consideration when
setting PPSMC_MSG_SetSoftMinByFreq and PPSMC_MSG_SetSoftMaxByFreq.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for the new SMU firmware interface for clock adjustment.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The initialized overdrive settings are taken from vbios and SMU(
by PPSMC_MSG_TransferTableSmu2Dram).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Powerplay uses 10KHz units.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix possible handshake hang and video playback crash

Corner cases:
 - Handshake between SMU and DCE causes hangs when CRTC is not
   enabled
 - System crash occurs when starting 4K playback with Movies and TV
   in an SLS configuration
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Needed for querying the stable pstate clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. The min/max level is determined by soft_min_level/soft_max_level.
2. Vega20 comes with pptable v3 which has no vdd related
table(vdd_dep_on_socclk, vdd_dep_on_mclk) support.
3. Vega20 does not support separate fan feature control(enable or
disable).

v2: squash in fixes:
- bug fix for force dpm level settings
- fix wrong data type
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is essentially necessary when uvd/vce dpm is not enabled yet.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support the power profile API.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

hwmgr is the interface for the driver to setup state
structures which are used by the smu for managing the
power state.

v2: squash in fixes:
- update set_watermarks_for_clocks_ranges to use common code
- drop unsupported apis
- correct MAX_REGULAR_DPM_NUMBER value
- multimonitor fixes
- add check for vbios pptable version
- revise dpm table setup
- init fclk dpm state
- Remove unused definition in vega20_hwmgr
- support power limit setup
- enable vega20 to honour DAL clock limits
- comment out dump_table debugging
v3: switch to SOC15 register access macros
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Vega20 has a new activity monitor table that is stored in memory.  Add
API to get and set the new table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The SMU manager handles the driver interaction with the SMU
which handles clock and voltage controls.

v2: switch to SOC15 register access macros
    reserve space for ActivityMonitor table
    enable SMU fw loading
    Drop dead code from bringup
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: squash in table size fixes
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: update to latest.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: cleanup
v3: fit the latest 40.6 smc fw
v4: update to latest.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: use thm 11.0.2 headers
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add struct atom_smc_dpm_info_v4_3
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some register offset in nbio v7.4 are different with v7.0.
We need a seperate nbio_v7_4.c for vega20.

v2: fix doorbell range for sdma (Alex)
v3: squash in static fix (kbuild test robot)
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert this to add proper nbio 7.4 support.

This reverts commit f5b2e1fa321eff20a9418ebd497d8a466f024a85.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add the system management controller v11.0 header files.

v2: cleanup
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Headers for thermal controller.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These are the System DMA register headers for vega20.

v2: cleanups (Alex)
v3: add missing licenses (Alex)
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: Cleanups (Alex)
v3: More updates (Alex)
v4: more cleanups (Alex)
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for DRM_FORMAT_{A,X}BGR8888 in atombios_crtc
Swapping of red and blue channels is implemented for radeon chipsets:
DCE2/R6xx and later - crossbar registers defined where needed and used
DCE1/R5xx - AVIVO_D1GRPH_SWAP_RB bit is used

(v2) Set AVIVO_D1GRPH_SWAP_RB bit in fb_format, using bitwise OR for DCE1 path
     Use bitwise OR where required for big endian settings in fb_swap
     Use existing code style CHIP_R600 condition, fix typo in R600 blue crossbar
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for DRM_FORMAT_{A,X}BGR8888 in amdgpu with amd dc disabled

(v2) Crossbar registers are defined and used to swap red and blue channels,
     keeping the existing coding style in each of the dce modules.
     After setting crossbar bits in fb_swap, use bitwise OR for big endian
     where required in DCE6 and DCE8 which do not rely on REG_SET_FIELD()
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SURFACE_PIXEL_FORMAT_GRPH_ABGR8888 is supported in amd/display/dc/dc_hw_types.h
and the necessary crossbars register controls to swap red and blue channels
are already implemented in drm/amd/display/dc/dce/dce_mem_input.c

(v4) Logic to handle new formats is added only in amdgpu_dm module.
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allow the user to disable AFVS via ppfeaturemask for debugging.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allow the user to disable AFVS via ppfeaturemask for debugging.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a ppfeaturemask flag to disable AVFS control.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Unsigned int is guaranteed to be >= 0, and read_channel_reply checks for
overflows. read_channel_reply also returns -1 on error, which is what
dc_link_aux_transfer is expected to return on error.

[How]
Remove the if-statement. Return result of read_channel_reply directly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

mono formats are treated exactly the same as equivallent bpp
444 formats. Dml validation however lacks 444 8 bit format
while dml perf param calculation lacks mono format support

This change makes them equivallent as far as the enum is concerned
to avoid having to update dml
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This allows us to avoid any vbios bugs when initializing clocks
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
There are outstanding bugs for PIP in Dal3:
-Crash when toggling PIP visibility
-Global Alpha is not working, Adjusting global alpha
 doesn’t have an effect
-Cursor is not working with pip plane and pipe splits
-One flash occurs when cursor enters PIP plane from
 top/bottom
-Crash when moving PIP plane off the screen

[How]
Resolve divide by 0 error
Implement global alpha
Program cursor on all pipes
Add dst rects' x and y offests into cursor position
Disable cursor when it is beyond bottom/top edge
Signed-off-by: Gloria Li <geling.li@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

there may be gfx off delay work pending when suspend/driver
unload, need to cancel them first.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Compare the current vrefresh in addition to the number of displays
when determining whether or not the smu needs updates when changing
modes. The SMU needs to be updated if the vbi timeout changes due
to a different refresh rate.  Fixes flickering around mode changes
in some cases on polaris parts.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>