- 28 Mar, 2012 26 commits
-
-
Mikulas Patocka authored
This patch introduces a new function dm_bufio_prefetch. It prefetches the specified range of blocks into dm-bufio cache without waiting for i/o completion. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com>
-
Joe Thornber authored
Add dm thin target arguments to control discard support. ignore_discard: Disables discard support no_discard_passdown: Don't pass discards down to the underlying data device, but just remove the mapping within the thin provisioning target. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
Support discards in the thin target. On discard the corresponding mapping(s) are removed from the thin device. If the associated block(s) are no longer shared the discard is passed to the underlying device. All bios other than discards now have an associated deferred_entry that is saved to the 'all_io_entry' in endio_hook. When non-discard IO completes and associated mappings are quiesced any discards that were deferred, via ds_add_work() in process_discard(), will be queued for processing by the worker thread. Signed-off-by:
-
Joe Thornber authored
This patch contains the ground work needed for dm-thin to support discard. - Adds endio function that replaces shared_read_endio. - Introduce an explicit 'quiesced' flag into the new_mapping structure. Before, this was implicitly indicated by m->list being empty. - The map_info->ptr remains constant for the duration of a bio's trip through the thin target. Make it easier to reason about it. Signed-off-by: -
Alasdair G Kergon authored
Use dm_target_offset wrapper instead of referencing the awkward ti->begin explicitly. Signed-off-by: -
Joe Thornber authored
Support the use of an external _read only_ device as an origin for a thin device. Any read to an unprovisioned area of the thin device will be passed through to the origin. Writes trigger allocation of new blocks as usual. One possible use case for this would be VM hosts that want to run guests on thinly-provisioned volumes but have the base image on another device (possibly shared between many VMs). Signed-off-by:
-
Mike Snitzer authored
The thin metadata format can only make use of a device that is <= THIN_METADATA_MAX_SECTORS (currently 15.9375 GB). Therefore, there is no practical benefit to using a larger device. However, it may be that other factors impose a certain granularity for the space that is allocated to a device (E.g. lvm2 can impose a coarse granularity through the use of large, >= 1 GB, physical extents). Rather than reject a larger metadata device, during thin-pool device construction, switch to allowing it but issue a warning if a device larger than THIN_METADATA_MAX_SECTORS_WARNING (16 GB) is provided. Any space over 15.9375 GB will not be used. Signed-off-by:
-
Joe Thornber authored
Save space by removing entries from the space map ref_count tree if they're no longer needed. Ref counts are stored in two places: a bitmap if the ref_count is below 3, or a btree of uint32_t if 3 or above. When a ref_count that was above 3 drops below we can remove it from the tree and save some metadata space. This removal was commented out before because I was unsure why this was causing under-populated btree nodes. Earlier patches have fixed this issue. Signed-off-by:
-
Joe Thornber authored
Commit unwritten data every second to prevent too much building up. Released blocks don't become available until after the next commit (for crash resilience). Prior to this patch commits were only triggered by a message to the target or a REQ_{FLUSH,FUA} bio. This allowed far too big a position to build up. The interval is hard-coded to 1 second. This is a sensible setting. I'm not making this user configurable, since there isn't much to be gained by tweaking this - and a lot lost by setting it far too high. Signed-off-by: -
Mikulas Patocka authored
Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by:
-
Jonathan E Brassow authored
The dm-raid code currently fails to create a RAID array if any of the superblocks cannot be read. This was an oversight as there is already code to handle this case if the values ('- -') were provided for the failed array position. With this patch, if a superblock cannot be read, the array position's fields are initialized as though '- -' was set in the table. That is, the device is failed and the position should not be used, but if there is sufficient redundancy, the array should still be activated. Signed-off-by:Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
Joe Thornber authored
Fix a harmless typo. The root is a chunk of data that gets written to the superblock. This data is used to recreate the space map when opening a metadata area. We have two space maps; one tracking space on the metadata device and one of the data device. Both of these use the same format for their root, so this typo was harmless. Signed-off-by:
-
Joe Thornber authored
Now that the value_size is held within every node of the btrees we can remove this argument from value_ptr(). For the last few months a BUG_ON has been checking this argument is the same as that held in the node. No issues were reported. So this is a safe change. Signed-off-by:
-
Jun'ichi Nomura authored
The map_context pointer should always be set. However, we have reports that upon requeuing it is not set correctly. So add set and clear functions with a BUG_ON() to track the issue properly. Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Mike Snitzer <snitzer@redhat.com> Acked-by:
Hannes Reinecke <hare@suse.de> Tested-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
Dave Wysochanski <dwysocha@redhat.com> Signed-off-by:
-
Hannes Reinecke authored
As a precaution, set bi_end_io to NULL when failing to remap. Signed-off-by:
-
Hannes Reinecke authored
free_devices in dm_table.c already uses list_for_each(), so we don't need to check if the list is empty. Signed-off-by:
-
Joe Thornber authored
Remove documentation for unimplemented 'trim' message. I'd planned a 'trim' target message for shrinking thin devices, but this is better handled via the discard ioctl. Signed-off-by:
-
Alasdair G Kergon authored
The dm raid module (using md) is becoming the preferred way of creating long-lived mirrors through userspace LVM so remove the EXPERIMENTAL tag. Signed-off-by: -
Alasdair G Kergon authored
Drop EXPERIMENTAL tag from dm-uevent. It's not changed for a while and some userspace tools are relying upon it. Signed-off-by: -
Alasdair G Kergon authored
Update device-mapper MAINTAINERS entry to mention quilt working tree location and persistent-data subdirectory. Signed-off-by: -
Milan Broz authored
Describe attributes provided by device-mapper in /sys/block. Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Joe Thornber authored
When we remove an entry from a node we sometimes rebalance with it's two neighbours. This wasn't being done correctly; in some cases entries have to move all the way from the right neighbour to the left neighbour, or vice versa. This patch pretty much re-writes the balancing code to fix it. This code is barely used currently; only when you delete a thin device, and then only if you have hundreds of them in the same pool. Once we have discard support, which removes mappings, this will be used much more heavily. Signed-off-by:
-
Joe Thornber authored
Avoid using the bi_next field for the holder of a cell when deferring bios because a stacked device below might change it. Store the holder in a new field in struct cell instead. When a cell is created, the bio that triggered creation (the holder) was added to the same bio list as subsequent bios. In some cases we pass this holder bio directly to devices underneath. If those devices use the bi_next field there will be trouble... This also simplifies some code that had to work out which bio was the holder. Signed-off-by:
-
Mikulas Patocka authored
Always set io->error to -EIO when an error is detected in dm-crypt. There were cases where an error code would be set only if we finish processing the last sector. If there were other encryption operations in flight, the error would be ignored and bio would be returned with success as if no error happened. This bug is present in kcryptd_crypt_write_convert, kcryptd_crypt_read_convert and kcryptd_async_done. Signed-off-by:
-
Mikulas Patocka authored
This patch fixes a possible deadlock in dm-crypt's mempool use. Currently, dm-crypt reserves a mempool of MIN_BIO_PAGES reserved pages. It allocates first MIN_BIO_PAGES with non-failing allocation (the allocation cannot fail and waits until the mempool is refilled). Further pages are allocated with different gfp flags that allow failing. Because allocations may be done in parallel, this code can deadlock. Example: There are two processes, each tries to allocate MIN_BIO_PAGES and the processes run simultaneously. It may end up in a situation where each process allocates (MIN_BIO_PAGES / 2) pages. The mempool is exhausted. Each process waits for more pages to be freed to the mempool, which never happens. To avoid this deadlock scenario, this patch changes the code so that only the first page is allocated with non-failing gfp mask. Allocation of further pages may fail. Signed-off-by:
-
Andrei Warkentin authored
Call the correct exit function on failure in dm_exception_store_init. Signed-off-by:
Andrei Warkentin <andrey.warkentin@gmail.com> Acked-by:
-
- 23 Mar, 2012 12 commits
-
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
Pull fbdev updates for 3.4 from Florian Tobias Schandinat: - drivers for Samsung Exynos MIPI DSI and display port - i740fb to support those old Intel chips - large updates to OMAP, viafb and sh_mobile_lcdcfb - some updates to s3c-fb and udlfb, few patches to others Fix up conflicts in drivers/video/udlfb.c due to Key Sievers' fix making it in twice. * tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6: (156 commits) Revert "video:uvesafb: Fix oops that uvesafb try to execute NX-protected page" OMAPDSS: register dss drivers in module init video: pxafb: add clk_prepare/clk_unprepare calls fbdev: bfin_adv7393fb: Drop needless include fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_info fbdev: remove dependency of FB_SH_MOBILE_MERAM from FB_SH_MOBILE_LCDC Revert "MAINTAINERS: add entry for exynos mipi display drivers" fbdev: da8xx: add support for SP10Q010 display fbdev: da8xx:: fix reporting of the display timing info drivers/video/pvr2fb.c: ensure arguments to request_irq and free_irq are compatible OMAPDSS: APPLY: fix clearing shadow dirty flag with manual update fbdev: sh_mobile_meram: Implement system suspend/resume fbdev: sh_mobile_meram: Remove unneeded sanity checks fbdev: sh_mobile_meram: Don't perform update in register operation arm: mach-shmobile: Constify sh_mobile_meram_cfg structures fbdev: sh_mobile_lcdc: Don't store copy of platform data fbdev: sh_mobile_meram: Remove unused sh_mobile_meram_icb_cfg fields arm: mach-shmobile: Don't set MERAM ICB numbers in platform data fbdev: sh_mobile_meram: Allocate ICBs automatically fbdev: sh_mobile_meram: Use genalloc to manage MERAM allocation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "Things are really quieting down with the regmap API, while we're still seeing a trickle of new features coming in they're getting much smaller than they were. It's also nice to have some features which support other subsystems building infrastructure on top of regmap. Highlights include: - Support for padding between the register and the value when interacting with the device, sometimes needed for fast interfaces. - Support for applying register updates to the device when restoring the register state. This is intended to be used to apply updates supplied by manufacturers for tuning the performance of the device (many of which are to undocumented registers which aren't otherwise covered). - Support for multi-register operations on cached registers. - Support for syncing only part of the register cache. - Stubs and parameter query functions intended to make it easier for other subsystems to build infrastructure on top of the regmap API. plus a few driver updates making use of the new features which it was easier to merge via this tree." * tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (41 commits) regmap: Fix future missing prototype of devres_alloc() and friends regmap: Rejig struct declarations for stubbed API regmap: Fix rbtree block base in sync regcache: Make sure we sync register 0 in an rbtree cache regmap: delete unused module.h from drivers/base/regmap files regmap: Add stub for regcache_sync_region() mfd: Improve performance of later WM1811 revisions regmap: Fix x86_64 breakage regmap: Allow drivers to sync only part of the register cache regmap: Supply ranges to the sync operations regmap: Add tracepoints for cache only and cache bypass regmap: Mark the cache as clean after a successful sync regmap: Remove default cache sync implementation regmap: Skip hardware defaults for LZO caches regmap: Expose the driver name in debugfs mfd: wm8400: Convert to devm_regmap_init_i2c() mfd: wm831x: Convert to devm_regmap_init() mfd: wm8994: Convert to devm_regmap_init() mfd/ASoC: Convert WM8994 driver to use regmap patches mfd: Add __devinit and __devexit annotations in wm8994 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394Linus Torvalds authored
Pull IEEE 1394 (FireWire) subsystem updates post v3.3 from Stefan Richter: - Some SBP-2 initiator fixes, side product from ongoing work on a target. - Reintroduction of an isochronous I/O feature of the older ieee1394 driver stack (flush buffer completions); it was evidently rarely used but not actually unused. Matching libraw1394 code is already available. - Be sure to prefix all kernel log messages with device name or card name, and other logging related cleanups. - Misc other small cleanups, among them a small API change that affects sound/firewire/ too. Clemens Ladisch is aware of it. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (26 commits) firewire: allow explicit flushing of iso packet completions firewire: prevent dropping of completed iso packet header data firewire: ohci: factor out iso completion flushing code firewire: ohci: simplify iso header pointer arithmetic firewire: ohci: optimize control bit checks firewire: ohci: remove unused excess_bytes field firewire: ohci: copy_iso_headers(): make comment match the code firewire: cdev: fix IR multichannel event documentation firewire: ohci: fix too-early completion of IR multichannel buffers firewire: ohci: move runtime debug facility out of #ifdef firewire: tone down some diagnostic log messages firewire: sbp2: replace a GFP_ATOMIC allocation firewire: sbp2: Fix SCSI sense data mangling firewire: sbp2: Ignore SBP-2 targets on the local node firewire: sbp2: Take into account Unit_Unique_ID firewire: nosy: Use the macro DMA_BIT_MASK(). firewire: core: convert AR-req handler lock from _irqsave to _bh firewire: core: fix race at address_handler unregistration firewire: core: remove obsolete comment firewire: core: prefix log messages with card name ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl updates for v3.4 from Linus Walleij (*): - Switches the PXA 168, 910 and MMP over to use pinctrl - Locking revamped - Massive refactorings... - Reform the driver API to use multiple states - Support pin config in the mapping tables - Pinctrl drivers for the nVidia Tegra series - Generic pin config support lib for simple pin controllers - Implement pin config for the U300 * tag 'pinctrl-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) ARM: u300: configure some pins as an example pinctrl: support pinconfig on the U300 pinctrl/coh901: use generic pinconf enums and parameters pinctrl: introduce generic pin config pinctrl: fix error path in pinconf_map_to_setting() pinctrl: allow concurrent gpio and mux function ownership of pins pinctrl: forward-declare struct device pinctrl: split pincontrol states into its own header pinctrl: include machine header to core.h ARM: tegra: Select PINCTRL Kconfig variables pinctrl: add a driver for NVIDIA Tegra pinctrl: Show selected function and group in pinmux-pins debugfs pinctrl: enhance mapping table to support pin config operations pinctrl: API changes to support multiple states per device pinctrl: add usecount to pins for muxing pinctrl: refactor struct pinctrl handling in core.c vs pinmux.c pinctrl: fix and simplify locking pinctrl: fix the pin descriptor kerneldoc pinctrl: assume map table entries can't have a NULL name field pinctrl: introduce PINCTRL_STATE_DEFAULT, define hogs as that state ... (*) What is it with all these Linuses these days? There's a Linus at google too. Some day I will get myself my own broadsword, and run around screaming "There can be only one". I used to be _special_ dammit. Snif.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
Pull libata updates from Jeff Garzik: 1) AHCI regression fix. A recent "make driver conform to spec" change broke on deployed hardware. Make new behavior optional, rather than default, turning it on only for specific embedded platforms that need this. Everybody else runs in the famous "non conformant but working" mode. 2) pata_cmd64x, pata_legacy cleanups 3) new Intel SATA PCI IDs 4) misc minor vendor feature additions * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_cmd64x: implement sff_irq_check() method pata_cmd64x: implement sff_irq_clear() method pata_cmd64x: use interrupt status from MRDMODE register pata_cmd64x: turn string of *if* statements into *switch* drivers/ata/pata_mpc52xx.c: clean up error handling code ahci_platform: add STRICT_AHCI platform type ahci: move AHCI_HFLAGS() macro to ahci.h ahci: add AHCI_HFLAG_DELAY_ENGINE host flag sata_fsl: add support for interrupt coalsecing feature ata/pata_arasan_cf: Add Hibernation support pata_legacy: correctly mask recovery field for HT6560B ata_piix: IDE-mode SATA patch for Intel Lynx Point DeviceIDs ahci: AHCI-mode SATA patch for Intel Lynx Point DeviceIDs -
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem updates from Dmitry Torokhov: "- we finally merged driver for USB version of Synaptics touchpads (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo); - a bunch of new drivers for embedded platforms (Cypress touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x touchscreens, TI touchscreen); - input core allows clients to specify desired clock source for timestamps on input events (EVIOCSCLOCKID ioctl); - input core allows querying state of all MT slots for given event code via EVIOCGMTSLOTS ioctl; - various driver fixes and improvements." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: ili210x - add support for Ilitek ILI210x based touchscreens Input: altera_ps2 - use of_match_ptr() Input: synaptics_usb - switch to module_usb_driver() Input: convert I2C drivers to use module_i2c_driver() Input: convert SPI drivers to use module_spi_driver() Input: omap4-keypad - move platform_data to <linux/platform_data> Input: kxtj9 - who_am_i check value and initial data rate fixes Input: add driver support for MAX8997-haptic Input: tegra-kbc - revise device tree support Input: of_keymap - add device tree bindings for simple key matrices Input: wacom - fix physical size calculation for 3rd-gen Bamboo Input: twl4030-vibra - really switch from #if to #ifdef Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible Input: max8925_onkey - avoid accessing input device too early Input: max8925_onkey - allow to be used as a wakeup source Input: atmel-wm97xx - convert to dev_pm_ops Input: atmel-wm97xx - set driver owner Input: add cyttsp touchscreen maintainer entry Input: cyttsp - remove useless checks in cyttsp_probe() Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a build problem where two crypto modules both try to export the same symbols (which shouldn't have been exported in the first place)." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: twofish-x86_64-3way - module init/exit functions should be static crypto: camellia-x86_64 - module init/exit functions should be static
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds authored
Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook. -
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mmLinus Torvalds authored
Pull cleancache changes from Konrad Rzeszutek Wilk: "This has some patches for the cleancache API that should have been submitted a _long_ time ago. They are basically cleanups: - rename of flush to invalidate - moving reporting of statistics into debugfs - use __read_mostly as necessary. Oh, and also the MAINTAINERS file change. The files (except the MAINTAINERS file) have been in #linux-next for months now. The late addition of MAINTAINERS file is a brain-fart on my side - didn't realize I needed that just until I was typing this up - and I based that patch on v3.3 - so the tree is on top of v3.3." * tag 'stable/for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm: MAINTAINERS: Adding cleancache API to the list. mm: cleancache: Use __read_mostly as appropiate. mm: cleancache: report statistics via debugfs instead of sysfs. mm: zcache/tmem/cleancache: s/flush/invalidate/ mm: cleancache: s/flush/invalidate/
-
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfinLinus Torvalds authored
Pull blackfin updates from Bob Liu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (24 commits) blackfin: clean up string bfin_dma_5xx after rename. blackfin:dma: rename bfin_dma_5xx.c to bfin_dma.c bf548: ssm2602: Add ssm2602 platform data into bf548 ezkit board file. Blackfin: s/#if CONFIG/#ifdef CONFIG/ Blackfin: pnav: delete duplicate linux/export.h include bf561: add ppi DLEN macro for 10bits to 16bits arch: blackfin: udpate defconfig Disintegrate asm/system.h for Blackfin [ver #2] arch/blackfin: don't generate random mac in bfin_get_ether_addr() Blackfin: wire up new process_vm syscalls blackfin: cleanup anomaly workarounds blackfin: update default defconfig blackfin: thread_info: add suspend flag bfin: add bfin_ad73311_machine platform device blackfin: bf537: stamp: update board file for 193x blackfin: kgdb: skip hardware watchpoint test bf548: add ppi interrupt mask and blanking clocks blackfin: bf561: forgot CSYNC in get_core_lock_noflush spi/bfin_spi: drop bits_per_word from client data blackfin: cplb-mpu: fix page mask table overflow ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 patches from Martin Schwidefsky: "The biggest patch is the rework of the smp code, something I wanted to do for some time. There are some patches for our various dump methods and one new thing: z/VM LGR detection. LGR stands for linux-guest- relocation and is the guest migration feature of z/VM. For debugging purposes we keep a log of the systems where a specific guest has lived." Fix up trivial conflict in arch/s390/kernel/smp.c due to the scheduler cleanup having removed some code next to removed s390 code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] kernel: Pass correct stack for smp_call_ipl_cpu() [S390] Ensure that vmcore_info pointer is never accessed directly [S390] dasd: prevent validate server for offline devices [S390] Remove monolithic build option for zcrypt driver. [S390] stack dump: fix indentation in output [S390] kernel: Add OS info memory interface [S390] Use block_sigmask() [S390] kernel: Add z/VM LGR detection [S390] irq: external interrupt code passing [S390] irq: set __ARCH_IRQ_EXIT_IRQS_DISABLED [S390] zfcpdump: Implement async sdias event processing [S390] Use copy_to_absolute_zero() instead of "stura/sturg" [S390] rework idle code [S390] rework smp code [S390] rename lowcore field [S390] Fix gcc 4.6.0 compile warning
-
Linus Torvalds authored
avc_audit() did a lot of jumping around and had a big stack frame, all for the uncommon case. Split up the uncommon case (which we really can't make go fast anyway) into its own slow function, and mark the conditional branches appropriately for the common likely case. This causes avc_audit() to no longer show up as one of the hottest functions on the branch profiles (the new "perf -b" thing), and makes the cycle profiles look really nice and dense too. The whole audit path is still annoyingly very much one of the biggest costs of name lookup, so these things are worth optimizing for. I wish we could just tell people to turn it off, but realistically we do need it: we just need to make sure that the overhead of the necessary evil is as low as possible. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Mar, 2012 2 commits
-
-
Linus Torvalds authored
While doing the fs/namei.c cleanups, I ran sparse on it, and it pointed out other large integers and a couple of cases of us using '0' instead of the proper 'NULL'. Sparse still doesn't understand some of the conditional locking going on, but that's no excuse for not fixing up the trivial stuff. Signed-off-by: -
Linus Torvalds authored
In commit commit 1de5b41c ("fs/namei.c: fix warnings on 32-bit") Andrew said that there must be a tidier way of doing this. This is that tidier way. Signed-off-by:
-
