A RDMA read-list cannot contain more elements than RPCSVC_MAXPAGES or
it will overflow the DTO context. Verify this when processing the
protocol header.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The svc_rdma_send_error function is called when an RPCRDMA protocol
error is detected. This function attempts to post an error reply message.
Since an error posting to a transport in error is ignored, change
the return type to void.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

This race was found by inspection. Messages can be received from the peer
immediately following the rdma_accept call, however, the CQ have not yet
been armed and the transport address has not yet been set.

Set the transport address in the connect request handler and arm the CQ
prior to calling rdma_accept.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The rdma_read_complete function needs to copy the rqstp transport address
from the transport. Failure to do so can result in using the wrong
authentication method for the RPC or bug checking if the rqstp address
is not valid.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

Use the ib_verbs version of the dma_unmap service in the
svc_rdma_put_context function. This should support providers
using software rdma.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

When the transport is closing, the DTO tasklet may queue data
that never gets processed. Clean up resources associated with
this I/O.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

Move the destruction of the QP and CM_ID to the free path so that the
QP cleanup code doesn't race with the dto_tasklet handling flushed WR.
The QP reference is not needed because we now have a reference for
every WR.

Also add a guard in the SQ and RQ completion handlers to ignore
calls generated by some providers when the QP is destroyed.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

Add a reference on the transport for every outstanding WR.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

Some providers may wait while destroying adapter resources.
Since it is possible that the last reference is put on the
dto_tasklet, the actual destroy must be scheduled as a work item.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The rq_cq_reap function is only called from the dto_tasklet. The
only resource shared with other threads is the sc_rq_dto_q. Move the
spin lock to protect only this list.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

Replace the one-off linked list implementation used to implement the
context cache with the standard Linux list_head lists. Add a context
counter to catch resource leaks. A WARN_ON will be added later to
ensure that we've freed all contexts.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

An NFS_WRITE requires a set of RDMA_READ requests to fetch the write
data from the client. There are two principal pieces of data that
need to be tracked: the list of pages that comprise the completed RPC
and the SGE of dma mapped pages to refer to this list of pages. Previously
this whole bit was managed as a linked list of contexts with the
context containing the page list buried in this list. This patch
simplifies this processing by not keeping a linked list, but rather only
a pionter from the last submitted RDMA_READ's context to the context
that maps the set of pages that describe the RPC.  This significantly
simplifies this code path. SGE contexts are cleaned up inline in the DTO
path instead of at read completion time.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The RDMACTXT_F_READ_DONE bit is not longer used. Remove it.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The rdma_read_xdr function did not discriminate between no read-list and
an error posting the read-list. This results in a leak of a page if there
is an error posting the read-list.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

A listening endpoint isn't known to the generic transport switch until
the svc_create_xprt function returns without error. Calling
svc_xprt_put within the xpo_create function causes the module reference
count to be erroneously decremented.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

If an error is encountered trying to post a recv buffer in send_reply,
free the passed in context. Return an error to the caller so it is
aware that the request was not posted.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

If there is an error posting the recv WR to the RQ, free the
context associated with the WR. This would leak a context when
asynchronous errors occurred on the transport while conccurent threads
were processing their RPC.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The svcrdma transport takes a reference when it gets the ESTABLISHED
event from the provider. This reference is supposed to be removed when
the DISCONNECT event is received, however, the call to svc_xprt_put
was missing in the switch statement. This results in the memory
associated with the transport never being freed.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

Fix the return value on close to -ENOTCONN so caller knows to free context.
Also if a thread is waiting for free SQ space, check for close when waking
to avoid posting WR to a closing transport.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The svc_rdma_send function will attempt to reap SQ WR to make room for
a new request if it finds the SQ full. This function races with the
dto_tasklet that also reaps SQ WR. To avoid polling and arming the CQ
unnecessarily move the test_and_clear_bit of the RDMAXPRT_SQ_PENDING
flag and arming of the CQ to the sq_cq_reap function.

Refactor the rq_cq_reap function to match sq_cq_reap so that the
code is easier to follow.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

The svcrdma transport provider currently allocates receive buffers
to the RQ through the xpo_release_rqst method. This approach is overly
complicated since it means that the rqstp rq_xprt_ctxt has to be
selectively set based on whether the RPC is going to be processed
immediately or deferred. Instead, just post the receive buffer when
we are certain that we are replying in the send_reply function.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

This cosmetic patch removes unused header files that svc_xprt.c
inherited from svcsock.c
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

Remove a redundant check for the XPT_DEAD bit in the svc_xprt_enqueue
function. This same bit is checked below while holding the pool lock
and prints a debug message if found to be dead.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/max6875: Really prevent 24RF08 corruption
  i2c-amd756: Fix functionality flags
  i2c: Kill the old driver matching scheme
  i2c: Convert remaining new-style drivers to use module aliasing
  i2c: Switch pasemi to the new device/driver matching scheme
  i2c: Clean up Blackfin BF527 I2C device declarations
  i2c-nforce2: Disable the second SMBus channel on the DFI Lanparty NF4 Expert
  i2c: New co-maintainer

Add multi_defconfig, to build a kernel for all supported m68k platforms,
excluding Sun 3 (Sun 3 kernels are incompatible with all other m68k platforms)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the m68k defconfigs
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k: Correctly handle multi-ISA at runtime in multi-platform kernels
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The *_ISA type defines are quite generic and cause namespace conflicts
(e.g. with `AMIGAHW_DECLARE(GG2_ISA)' in <asm/amigahw.h>) for some kernel
configurations. Use ISA_TYPE_* to avoid such conflicts.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UIO needs m68k_mmutype:

ERROR: "m68k_mmutype" [drivers/uio/uio.ko] undefined!

(noticed by Christian T. Steigies)
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mark Q40/Q60 floppy support broken:

    arch/m68k/q40/q40ints.c: In function 'q40_irq_handler':
    arch/m68k/q40/q40ints.c:214: error: implicit declaration of function 'floppy_hardint'

Including <asm/floppy.h> doesn't help, as it causes a lot of additional error
messages (cfr. Sun 3x).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

According to the tests in do_initcalls(), the proper error code in case no
device is found is -ENODEV, not -ENXIO or -EIO.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some input drivers do not check whether they're actually running on the
correct platform, causing multi-platform kernels to crash if they are not.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some network drivers do not check whether they're actually running on the
correct platform, causing multi-platform kernels to crash if they are not.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Apollo frame buffer device driver (dnfb) doesn't check whether it's
actually running on Apollo hardware, causing a crash if it isn't.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Macintosh IDE driver (macide) doesn't check whether it's actually running
on Mac hardware, causing a crash if it isn't.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When running a HP300-enabled kernel on non-HP300 hardware, a test in the early
startup code jumps to the wrong label, causing a double bus fault.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use `__builtin_trap()' instead of `asm volatile("illegal")' in the m68k BUG()
macros (as suggested by Andrew Pinski), to kill warnings in code that assumes
BUG() does not return.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68k vme_scc:
  - make scc_ports[] static
  - kill unused global scc_initialized
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Hisoft Whippet PCMCIA serial driver has been removed a long time ago, but
it's Kconfig symbol still existed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>