- 03 Mar, 2016 40 commits
-
-
Mario Kleiner authored
commit 2b8341b3 upstream. This fixes a regression introduced in Linux 4.4. Limit the amount of time radeon_flip_work_func can delay programming a page flip, by both limiting the maximum amount of time per wait cycle and the maximum number of wait cycles. Continue the flip if the limit is exceeded, even if that may result in a visual or timing glitch. This is to prevent a hang of page flips, as reported in fdo bug #93746: Disconnecting a DisplayPort display in parallel to a kms pageflip getting queued can cause the following hang of page flips and thereby an unusable desktop: 1. kms pageflip ioctl() queues pageflip -> queues execution of radeon_flip_work_func. 2. Hotunplug of display causes the driver to DPMS OFF the unplugged display. Display engine shuts down, scanout no longer moves, but stays at its resting position at start line of vblank. 3. radeon_flip_work_func executes while crtc is off, and due to the non-moving scanout position, the new flip delay code introduced into Linux 4.4 by commit 5b5561b3 ("drm/radeon: Fixup hw vblank counter/ts..") enters an infinite wait loop. 4. After reconnecting the display, the pageflip continues to hang in 3. and the display doesn't update its view of the desktop. This patch fixes the Linux 4.4 regression from fdo bug #93746 <https://bugs.freedesktop.org/show_bug.cgi?id=93746> v2: Skip wait immediately if !radeon_crtc->enabled, as suggested by Michel. Reported-by:
Bernd Steinhauser <linux@bernd-steinhauser.de> Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Tested-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Kleiner authored
commit bb74fc1b upstream. drm_vblank_offdelay can have three different types of values: < 0 is to be always treated the same as dev->vblank_disable_immediate = 0 is to be treated as "never disable vblanks" > 0 is to be treated as disable immediate if kms driver wants it that way via dev->vblank_disable_immediate. Otherwise it is a disable timeout in msecs. This got broken in Linux 3.18+ for the implementation of drm_vblank_on. If the user specified a value of zero which should always reenable vblank irqs in this function, a kms driver could override the users choice by setting vblank_disable_immediate to true. This patch fixes the regression and keeps the user in control. v2: Only reenable vblank if there are clients left or the user requested to "never disable vblanks" via offdelay 0. Enabling vblanks even in the "delayed disable" case (offdelay > 0) was specifically added by Ville in commit cd19e52a ("drm: Kick start vblank interrupts at drm_vblank_on()"), but after discussion it turns out that this was done by accident. Citing Ville: "I think it just ended up as a mess due to changing some of the semantics of offdelay<0 vs. offdelay==0 vs. disable_immediate during the review of the series. So yeah, given how drm_vblank_put() works now, I'd just make this check for offdelay==0." Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: michel@daenzer.net Cc: vbabka@suse.cz Cc: ville.syrjala@linux.intel.com Cc: daniel.vetter@ffwll.ch Cc: dri-devel@lists.freedesktop.org Cc: alexander.deucher@amd.com Cc: christian.koenig@amd.com Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Mario Kleiner authored
commit c61934ed upstream. Changes to drm_update_vblank_count() in Linux 4.4 broke the behaviour of the pre/post modeset functions as the new update code doesn't deal with hw vblank counter resets inbetween calls to drm_vblank_pre_modeset an drm_vblank_post_modeset, as it should. This causes mistreatment of such hw counter resets as counter wraparound, and thereby large forward jumps of the software vblank counter which in turn cause vblank event dispatching and vblank waits to fail/hang --> userspace clients hang. This symptom was reported on radeon-kms to cause a infinite hang of KDE Plasma 5 shell's login procedure, preventing users from logging in. Fix this by detecting when drm_update_vblank_count() is called inside a pre->post modeset interval. If so, clamp valid vblank increments to the safe values 0 and 1, pretty much restoring the update behavior of the old update code of Linux 4.3 and earlier. Also reset the last recorded hw vblank count at call to drm_vblank_post_modeset() to be safe against hw that after modesetting, dpms on etc. only fires its first vblank irq after drm_vblank_post_modeset() was already called. Reported-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Mario Kleiner authored
commit 99b8e715 upstream. This fixes a regression introduced by the new drm_update_vblank_count() implementation in Linux 4.4: Restrict the bump of the software vblank counter in drm_update_vblank_count() to a safe maximum value of +1 whenever there is the possibility that concurrent readers of vblank timestamps could be active at the moment, as the current implementation of the timestamp caching and updating is not safe against concurrent readers for calls to store_vblank() with a bump of anything but +1. A bump != 1 would very likely return corrupted timestamps to userspace, because the same slot in the cache could be concurrently written by store_vblank() and read by one of those readers in a non-atomic fashion and without the read-retry logic detecting this collision. Concurrent readers can exist while drm_update_vblank_count() is called from the drm_vblank_off() or drm_vblank_on() functions or other non-vblank- irq callers. However, all those calls are happening with the vbl_lock locked thereby preventing a drm_vblank_get(), so the vblank refcount can't increase while drm_update_vblank_count() is executing. Therefore a zero vblank refcount during execution of that function signals that is safe for arbitrary counter bumps if called from outside vblank irq, whereas a non-zero count is not safe. Whenever the function is called from vblank irq, we have to assume concurrent readers could show up any time during its execution, even if the refcount is currently zero, as vblank irqs are usually only enabled due to the presence of readers, and because when it is called from vblank irq it can't hold the vbl_lock to protect it from sudden bumps in vblank refcount. Therefore also restrict bumps to +1 when the function is called from vblank irq. Such bumps of more than +1 can happen at other times than reenabling vblank irqs, e.g., when regular vblank interrupts get delayed by more than 1 frame due to long held locks, long irq off periods, realtime preemption on RT kernels, or system management interrupts. A better solution would be to rewrite the timestamp caching to use full seqlocks to allow concurrent writes and reads for arbitrary vblank counter increments. v2: Add code comment that this is essentially a hack and should be replaced by a full seqlock implementation for caching of timestamps. Signed-off-by:
-
Mario Kleiner authored
commit e8235891 upstream. Otherwise if a kms driver calls into drm_vblank_off() more than once before calling drm_vblank_on() again, the redundant calls to vblank_disable_and_save() will call drm_update_vblank_count() while hw vblank counters and vblank timestamping are in a undefined state during modesets, dpms off etc. At least with the legacy drm helpers it is not unusual to get multiple calls to drm_vblank_off and drm_vblank_on, e.g., half a dozen calls to drm_vblank_off and two calls to drm_vblank_on were observed on radeon-kms during dpms-off -> dpms-on transition. We don't no-op calls from atomic modesetting drivers, as they should do a proper job of tracking hw state. Fixes large jumps of the software maintained vblank counter due to the hardware vblank counter resetting to zero during dpms off or modeset, e.g., if radeon-kms is modified to use drm_vblank_off/on instead of drm_vblank_pre/post_modeset(). This fixes a regression caused by the changes made to drm_update_vblank_count() in Linux 4.4. v2: Don't no-op on atomic modesetting drivers, per suggestion of Daniel Vetter. Signed-off-by:
-
Rasmus Villemoes authored
commit bc3f5d8c upstream. We need to use post-decrement to get the pci_map_page undone also for i==0, and to avoid some very unpleasant behaviour if pci_map_page failed already at i==0. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Gerd Hoffmann authored
commit 34855706 upstream. This avoids integer overflows on 32bit machines when calculating reloc_info size, as reported by Alan Cox. Cc: gnomes@lxorguk.ukuu.org.uk Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
-
Rasmus Villemoes authored
commit ed3f9fd1 upstream. This fails to undo the setup for pin==0; moreover, something interesting happens if the setup failed already at pin==0. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-3-git-send-email-linux@rasmusvillemoes.dk (cherry picked from commit 2417c8c0) Signed-off-by:
-
Jani Nikula authored
commit 26f6f2d3 upstream. Since sequence block v2 the second byte contains flags other than just pull up/down. Don't pass arbitrary data to the sideband interface. The rest may or may not work for sequence block v2, but there should be no harm done. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
commit 4db3a244 upstream. Do not blindly trust the VBT data used for indexing. Reviewed-by:
-
Lyude authored
commit 3d849b02 upstream. We don't actually check for INTEL_OUTPUT_DP_MST at all in here, as a result we skip assigning a DPLL to any DP MST ports, which makes link training fail: [ 1442.933896] [drm:intel_power_well_enable] enabling DDI D power well [ 1442.933905] [drm:skl_set_power_well] Enabling DDI D power well [ 1442.933957] [drm:intel_mst_pre_enable_dp] 0 [ 1442.935474] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1442.935477] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1442.935480] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1442.936190] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 1442.936193] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 1442.936195] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1442.936858] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1442.936862] [drm:intel_dp_set_signal_levels] Using vswing level 2 … [ 1442.998253] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up [ 1442.998512] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting After which the pipe state goes completely out of sync: [ 70.075596] [drm:check_crtc_state] [CRTC:25] [ 70.075696] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ddi_pll_sel (expected 0x00000000, found 0x00000001) [ 70.075747] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in shared_dpll (expected -1, found 0) [ 70.075798] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021) [ 70.075840] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x80400173) [ 70.075884] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000003a5) [ 70.075954] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 262750, found 72256) [ 70.075999] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 540000, found 148500) And if you're especially lucky, it keeps going downhill: [ 83.309256] Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler [ 83.309265] [ 83.309265] ================================= [ 83.309266] [ INFO: inconsistent lock state ] [ 83.309267] 4.5.0-rc1Lyude-Test #265 Not tainted [ 83.309267] --------------------------------- [ 83.309268] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 83.309270] Xorg/1194 [HC0[1]:SC0[0]:HE1:SE1] takes: [ 83.309293] (&(&dev_priv->uncore.lock)->rlock){?.-...}, at: [<ffffffffa02a6073>] gen9_write32+0x63/0x400 [i915] [ 83.309293] {IN-HARDIRQ-W} state was registered at: [ 83.309297] [<ffffffff810e84f4>] __lock_acquire+0x9c4/0x1d00 [ 83.309299] [<ffffffff810ea1be>] lock_acquire+0xce/0x1c0 [ 83.309302] [<ffffffff8177d936>] _raw_spin_lock_irqsave+0x56/0x90 [ 83.309321] [<ffffffffa02a5492>] gen9_read32+0x52/0x3d0 [i915] [ 83.309332] [<ffffffffa024beea>] gen8_irq_handler+0x27a/0x6a0 [i915] [ 83.309337] [<ffffffff810fdbc1>] handle_irq_event_percpu+0x41/0x300 [ 83.309339] [<ffffffff810fdeb9>] handle_irq_event+0x39/0x60 [ 83.309341] [<ffffffff811010b4>] handle_edge_irq+0x74/0x130 [ 83.309344] [<ffffffff81009073>] handle_irq+0x73/0x120 [ 83.309346] [<ffffffff817805f1>] do_IRQ+0x61/0x120 [ 83.309348] [<ffffffff8177e6d6>] ret_from_intr+0x0/0x20 [ 83.309351] [<ffffffff815f5105>] cpuidle_enter_state+0x105/0x330 [ 83.309353] [<ffffffff815f5367>] cpuidle_enter+0x17/0x20 [ 83.309356] [<ffffffff810dbe1a>] call_cpuidle+0x2a/0x50 [ 83.309358] [<ffffffff810dc1dd>] cpu_startup_entry+0x26d/0x3a0 [ 83.309360] [<ffffffff817701da>] rest_init+0x13a/0x140 [ 83.309363] [<ffffffff81f2af8e>] start_kernel+0x475/0x482 [ 83.309365] [<ffffffff81f2a315>] x86_64_start_reservations+0x2a/0x2c [ 83.309367] [<ffffffff81f2a452>] x86_64_start_kernel+0x13b/0x14a Fixes: 82d35437 ("drm/i915/skl: Implementation of SKL DPLL programming") Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
commit 6f94b6dd upstream. On SKL+ plane scaling is mutually exclusive with color keying. The code check for this, but during some refactoring the code got changed to also reject primary plane windowing when color keying is used. There is no such restriction in the hardware, so restore the original logic. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 061e4b8d ("drm/i915: clean up atomic plane check functions, v2.") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 693bdc28) Signed-off-by:
-
Jani Nikula authored
commit 5efd4076 upstream. Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Reported-and-tested-by:
Dihan Wickremasuriya <nayomal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331Reviewed-by:
-
Francisco Jerez authored
commit 935a0ff0 upstream. We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee that writes performed via the HDC are visible in memory. Fixes an intermittent failure in a Piglit test that writes to a BO from a shader using GL atomic counters (implemented as HDC untyped atomics) and then expects the memory to read back the same value after mapping it on the CPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298Tested-by:
Mark Janes <mark.a.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Reviewed-by:
-
Daniel Vetter authored
commit f5949141 upstream. Since commit ac9b8236 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Nov 27 18:55:26 2015 +0200 drm/i915: Introduce a gmbus power domain gmbus also needs the power domain infrastructure right from the start, since as soon as we register the i2c controllers someone can use them. v2: Adjust cleanup paths too (Chris). v3: Rebase onto -nightly (totally bogus tree I had lying around) and also move dpio init head (Ville). v4: Ville instead suggested to move gmbus setup later in the sequence, since it's only needed by the modeset code. v5: Move even close to the actual user, right next to the comment that states where we really need gmbus (and interrupts!). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: ac9b8236 ("drm/i915: Introduce a gmbus power domain") References: http://www.spinics.net/lists/intel-gfx/msg83075.htmlSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Lyude authored
commit 2dc2f761 upstream. This fixes reprobing of display connectors on resume. After some talking with danvet on IRC, I learned that calling drm_helper_hpd_irq_event() does actually trigger a full reprobe of each connector's status. It turns out this is the actual reason reprobing on resume hasn't been working (this was observed on a T440s): - We call hpd_init() - We check each connector for a couple of things before marking connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an active encoder. Of course, a disconnected port won't have an active encoder, so we don't add the flag to any of the connectors. - We call drm_helper_hpd_irq_event() - drm_helper_irq_event() checks each connector for the DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1, so we skip reprobing each connector except that one. In addition, we also now avoid setting connector->polled to DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is handled by the mst helpers. This is probably what was originally intended to happen here. Changes since V1: * Use the explanation of the issue as the commit message instead * Change the title of the commit, since this does more then just stop a check for an encoder now * Add "Fixes" line for the patch that introduced this regression * Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors Changes since V2: * Put patch changelog above Signed-off-by * Follow Daniel Vetter's suggestion for making the code here a bit more legible Fixes: 0e32b39c ("drm/i915: add DP 1.2 MST support (v0.7)") Signed-off-by:
-
Chris Wilson authored
commit 06ef83a7 upstream. Following a GPU reset, we may leave the context in a poorly defined state, and reloading from that context will leave the GPU flummoxed. For secondary contexts, this will lead to that context being banned - but currently it is also causing the default context to become banned, leading to turmoil in the shared state. This is a regression from commit 6702cf16 [v4.1] Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Mar 16 16:00:58 2015 +0000 drm/i915: Initialize all contexts which quietly introduced the removal of the MI_RESTORE_INHIBIT on the default context. v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448630935-27377-1-git-send-email-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> [danvet: This seems to fix a gpu hand on after the first resume, resulting in any future suspend operation failing with -EIO because the gpu seems to be in a funky state. Somehow this patch fixes that.] Signed-off-by:
-
Insu Yun authored
commit dabe1954 upstream. In drm_dp_mst_allocate_vcpi, it returns true in two paths, but in one path, there is no reference couting decrease. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
-
Nicolai Hähnle authored
commit f6ff4f67 upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
-
Oded Gabbay authored
commit c5244987 upstream. Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Dave Airlie authored
commit 4b0e4e4a upstream. Reviewed-by:
-
Slava Grigorev authored
commit fe6fc1f1 upstream. Properly setup the DFS divider for DP audio for DCE4.1. Signed-off-by:
Slava Grigorev <slava.grigorev@amd.com> Reviewed-by:
-
Slava Grigorev authored
commit a64c9dab upstream. Move encoding of DFS (digital frequency synthesizer) divider into a separate function and improve calculation precision. Signed-off-by:
-
Slava Grigorev authored
commit c9a392ea upstream. This is preparation for the fixes in the following patches. Signed-off-by:
-
Alex Deucher authored
commit cc78eb22 upstream. Firmware is LE. Need to properly byteswap some of the fields so they are interpreted correctly by the driver on BE systems. Reviewed-by:
-
Alex Deucher authored
commit 0eb1c3d4 upstream. Combine the two quirks. bug: https://bugzilla.kernel.org/show_bug.cgi?id=109481Signed-off-by:
-
Slava Grigorev authored
commit ac4a9350 upstream. DP audio is derived from the dfs clock. Signed-off-by:
-
Alex Deucher authored
commit dbb17a21 upstream. Need to call this on resume if displays changes during suspend in order to properly be notified of changes. Signed-off-by:
-
Felix Kuehling authored
commit 42ef344c upstream. eoffset is sometimes treated as the last address inside the address range, and sometimes as the first address outside the range. This was resulting in errors when a test filled up the entire address space. Make it consistent to always be the last address within the range. Also fixed related errors when checking the VA limit and in radeon_vm_fence_pts. Signed-off-by:
Felix.Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Mykola Lysenko authored
commit 91a25e46 upstream. This is needed to properly deallocate port payload after downstream branch get unplugged. In order to do this unplugged MST topology should be preserved, to find first alive port on path to unplugged MST topology, and send payload deallocation request to branch device of found port. For this mstb and port kref's are used in reversed order to track when port and branch memory could be freed. Added additional functions to find appropriate mstb as described above. Signed-off-by:
Mykola Lysenko <Mykola.Lysenko@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
commit c175cd16 upstream. On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
-
Hersen Wu authored
commit 5e93b820 upstream. Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
Harry Wentland authored
commit a9ebb3e4 upstream. Our PBN value overflows the 20 bits integer part of the 20.12 fixed point. We need to use 31.32 fixed point to avoid this. This happens with display clocks larger than 293122 (at 24 bpp), which we see with the Sharp (and similar) 4k tiled displays. Signed-off-by:
-
Harry Wentland authored
commit 64566b5e upstream. drm_fixp_from_fraction allows us to create a fixed point directly from a fraction, rather than creating fixed point values and dividing later. This avoids overflow of our 64 bit value for large numbers. drm_fixp2int_ceil allows us to return the ceiling of our fixed point value. [airlied: squash Jordan's fix] 32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com> Signed-off-by:
-
Mykola Lysenko authored
commit 7a11a334 upstream. This is needed to receive correct port number from RAD, so MSTB could be found Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Mykola Lysenko authored
commit 75af4c8c upstream. This fix is needed to support more then two branch displays, so RAD address consist at least of 2 elements Acked-by:
-
Mykola Lysenko authored
commit 1f16ee7f upstream. We should always send reply for UP request in order to make downstream device clean-up resources appropriately. Issue was that reply for UP request was sent only once. Acked-by:
-
Mykola Lysenko authored
commit bd934320 upstream. In case broadcast message received in UP request, RAD cannot be used to identify message originator. Message should be parsed, originator should be found by GUID from parsed message. Also reply with broadcast in case broadcast message received (for now it is always broadcast) Acked-by:
-
Thierry Reding authored
commit 870571a5 upstream. The error cleanup paths aren't quite correct and will crash upon deferred probe. Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Ben Skeggs authored
commit 95664e66 upstream. This can happen under some annoying circumstances, and is a quick fix until more substantial changes can be made. Fixed eDP mode changes on (at least) the Lenovo P50. Signed-off-by:
-
