- 17 May, 2016 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper updates from Mike Snitzer: - based on Jens' 'for-4.7/core' to have DM thinp's discard support use bio_inc_remaining() and the block core's new async __blkdev_issue_discard() interface - make DM multipath's fast code-paths lockless, using lockless_deference, to significantly improve large NUMA performance when using blk-mq. The m->lock spinlock contention was a serious bottleneck. - a few other small code cleanups and Documentation fixes * tag 'dm-4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: unroll issue_discard() to create longer discard bio chains dm thin: use __blkdev_issue_discard for async discard support dm thin: remove __bio_inc_remaining() and switch to using bio_inc_remaining() dm raid: make sure no feature flags are set in metadata dm ioctl: drop use of __GFP_REPEAT in copy_params()'s __vmalloc() call dm stats: fix spelling mistake in Documentation dm cache: update cache-policies.txt now that mq is an alias for smq dm mpath: eliminate use of spinlock in IO fast-paths dm mpath: move trigger_event member to the end of 'struct multipath' dm mpath: use atomic_t for counting members of 'struct multipath' dm mpath: switch to using bitops for state flags dm thin: Remove return statement from void function dm: remove unused mapped_device argument from free_tio()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: "On top of the core pull request, this is the drivers pull request for this merge window. This contains: - Switch drivers to the new write back cache API, and kill off the flush flags. From me. - Kill the discard support for the STEC pci-e flash driver. It's trivially broken, and apparently unmaintained, so it's safer to just remove it. From Jeff Moyer. - A set of lightnvm updates from the usual suspects (Matias/Javier, and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei Tao. - A set of updates for NVMe: - Turn the controller state management into a proper state machine. From Christoph. - Shuffling of code in preparation for NVMe-over-fabrics, also from Christoph. - Cleanup of the command prep part from Ming Lin. - Rewrite of the discard support from Ming Lin. - Deadlock fix for namespace removal from Ming Lin. - Use the now exported blk-mq tag helper for IO termination. From Sagi. - Various little fixes from Christoph, Guilherme, Keith, Ming Lin, Wang Sheng-Hui. - Convert mtip32xx to use the now exported blk-mq tag iter function, from Keith" * 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits) lightnvm: reserved space calculation incorrect lightnvm: rename nr_pages to nr_ppas on nvm_rq lightnvm: add is_cached entry to struct ppa_addr lightnvm: expose gennvm_mark_blk to targets lightnvm: remove mgt targets on mgt removal lightnvm: pass dma address to hardware rather than pointer lightnvm: do not assume sequential lun alloc. nvme/lightnvm: Log using the ctrl named device lightnvm: rename dma helper functions lightnvm: enable metadata to be sent to device lightnvm: do not free unused metadata on rrpc lightnvm: fix out of bound ppa lun id on bb tbl lightnvm: refactor set_bb_tbl for accepting ppa list lightnvm: move responsibility for bad blk mgmt to target lightnvm: make nvm_set_rqd_ppalist() aware of vblks lightnvm: remove struct factory_blks lightnvm: refactor device ops->get_bb_tbl() lightnvm: introduce nvm_for_each_lun_ppa() macro lightnvm: refactor dev->online_target to global nvm_targets lightnvm: rename nvm_targets to nvm_tgt_type ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull core block layer updates from Jens Axboe: "This is the core block IO changes for this merge window. Nothing earth shattering in here, it's mostly just fixes. In detail: - Fix for a long standing issue where wrong ordering in blk-mq caused order_to_size() to spew a warning. From Bart. - Async discard support from Christoph. Basically just splitting our sync interface into a submit + wait part. - Add a cleaner interface for flagging whether a device has a write back cache or not. We've previously overloaded blk_queue_flush() with this, but let's make it more explicit. Drivers cleaned up and updated in the drivers pull request. From me. - Fix for a double check for whether IO accounting is enabled or not. From Michael Callahan. - Fix for the async discard from Mike Snitzer, reinstating the early EOPNOTSUPP return if the device doesn't support discards. - Also from Mike, export bio_inc_remaining() so dm can drop it's private copy of it. - From Ming Lin, add support for passing in an offset for request payloads. - Tag function export from Sagi, which will be used in NVMe in the drivers pull. - Two blktrace related fixes from Shaohua. - Propagate NOMERGE flag when making a request from a bio, also from Shaohua. - An optimization to not parse cgroup paths in blk-throttle, if we don't need to. From Shaohua" * 'for-4.7/core' of git://git.kernel.dk/linux-block: blk-mq: fix undefined behaviour in order_to_size() blk-throttle: don't parse cgroup path if trace isn't enabled blktrace: add missed mask name blktrace: delete garbage for message trace block: make bio_inc_remaining() interface accessible again block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discard block: Minor blk_account_io_start usage cleanup block: add __blkdev_issue_discard block: remove struct bio_batch block: copy NOMERGE flag from bio to request block: add ability to flag write back caching on a device blk-mq: Export tagset iter function block: add offset in blk_add_request_payload() writeback: Fix performance regression in wb_over_bg_thresh()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs cleanups from Al Viro: "More cleanups from Christoph" * 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: nfsd: use RWF_SYNC fs: add RWF_DSYNC aand RWF_SYNC ceph: use generic_write_sync fs: simplify the generic_write_sync prototype fs: add IOCB_SYNC and IOCB_DSYNC direct-io: remove the offset argument to dio_complete direct-io: eliminate the offset argument to ->direct_IO xfs: eliminate the pos variable in xfs_file_dio_aio_write filemap: remove the pos argument to generic_file_direct_write filemap: remove pos variables in generic_file_read_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull 'struct path' constification update from Al Viro: "'struct path' is passed by reference to a bunch of Linux security methods; in theory, there's nothing to stop them from modifying the damn thing and LSM community being what it is, sooner or later some enterprising soul is going to decide that it's a good idea. Let's remove the temptation and constify all of those..." * 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: constify ima_d_path() constify security_sb_pivotroot() constify security_path_chroot() constify security_path_{link,rename} apparmor: remove useless checks for NULL ->mnt constify security_path_{mkdir,mknod,symlink} constify security_path_{unlink,rmdir} apparmor: constify common_perm_...() apparmor: constify aa_path_link() apparmor: new helper - common_path_perm() constify chmod_common/security_path_chmod constify security_sb_mount() constify chown_common/security_path_chown tomoyo: constify assorted struct path * apparmor_path_truncate(): path->mnt is never NULL constify vfs_truncate() constify security_path_truncate() [apparmor] constify struct path * in a bunch of helpers
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull cifs xattr updates from Al Viro: "This is the remaining parts of the xattr work - the cifs bits" * 'for-cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cifs: Switch to generic xattr handlers cifs: Fix removexattr for os2.* xattrs cifs: Check for equality with ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT cifs: Fix xattr name checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF fixes from Jan Kara: "A fix for UDF crash on corrupted media and one UDF header fixup" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Export superblock magic to userspace udf: Prevent stack overflow on corrupted filesystem mount
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull jfs updates from Dave Kleikamp: "Some jfs logging cleanups from Joe Perches" * tag 'jfs-4.7' of git://github.com/kleikamp/linux-shaggy: jfs: Coalesce some formats jfs: Remove unnecessary line continuations and terminating newlines jfs: Remove terminating newlines from jfs_info, jfs_warn, jfs_err uses
-
Kees Cook authored
This section of code initially looks redundant, but is required. This improves the comment to explain more clearly why the reset is needed. Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
This reverts commit 7f32541c. This needs reverting too, as per requests. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 81003bc9. Developers have asked me to revert this for now. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ard Biesheuvel authored
The current logic around the 'use_dac' module parameter prevents the r81969 driver from being loadable on 64-bit systems without any RAM below 4 GB when the parameter is left at its default value. So introduce a new default value -1 which indicates that 64-bit DMA should be enabled on sufficiently recent PCIe chips, i.e., versions RTL_GIGA_MAC_VER_18 or later. Explicit param values of 0 or 1 retain the existing behavior of unconditionally enabling/disabling 64-bit DMA on 64-bit architectures (i.e., regardless of the type and version of the chip) Since PCIe chips do not need to CPlusCmd Dual Address Cycle to be set, make that conditional on the device type as well. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Graf authored
If you compile without OF_MDIO support in an RGMII configuration, we fail to configure the dp83867 phy today by writing garbage into its configuration registers. On the other hand if you do compile with OF_MDIO and the phy gets loaded via device tree, you have to have the properties set in the device tree, otherwise we fail to load the driver and don't even attach the generic phy driver to the interface anymore. To make things slightly more consistent, make the rgmii configuration properties optional and allow a user to omit them in their device tree. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Graf authored
When CONFIG_OF_MDIO is configured as module, the #define for it really is CONFIG_OF_MDIO_MODULE, not CONFIG_OF_MDIO. So if we are compiling it as module, the dp83867 doesn't see that OF_MDIO was selected and doesn't read the dt rgmii parameters. The fix is simple: Use IS_ENABLED(). It checks for both - module as well as compiled in code. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://github.com/andersson/kernelDavid S. Miller authored
Merge tag 'qcom-soc-for-4.7-2' into net-next This merges the Qualcomm SOC tree with the net-next, solving the merge conflict in the SMD API between the two.
-
Yang Shi authored
In the current implementation of ARM64 eBPF JIT, R23 and R24 are used for tmp registers, which are callee-saved registers. This leads to variable size of JIT prologue and epilogue. The latest blinding constant change prefers to constant size of prologue and epilogue. AAPCS reserves R9 ~ R15 for temp registers which not need to be saved/restored during function call. So, replace R23 and R24 to R10 and R11, and remove tmp_used flag to save 2 instructions for some jited BPF program. CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by:
Yang Shi <yang.shi@linaro.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Stultz authored
In testing with HiKey, we found that since commit 3f30b158 ("asix: On RX avoid creating bad Ethernet frames"), we're seeing lots of noise during network transfers: [ 239.027993] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988 [ 239.037310] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x54ebb5ec, offset 4 [ 239.045519] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xcdffe7a2, offset 4 [ 239.275044] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988 [ 239.284355] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x1d36f59d, offset 4 [ 239.292541] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xaef3c1e9, offset 4 [ 239.518996] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988 [ 239.528300] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x2881912, offset 4 [ 239.536413] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x5638f7e2, offset 4 And network throughput ends up being pretty bursty and slow with a overall throughput of at best ~30kB/s (where as previously we got 1.1MB/s with the slower USB1.1 "full speed" host). We found the issue also was reproducible on a x86_64 system, using a "high-speed" USB2.0 port but the throughput did not measurably drop (possibly due to the scp transfer being cpu bound on my slow test hardware). After lots of debugging, I found the check added in the problematic commit seems to be calculating the offset incorrectly. In the normal case, in the main loop of the function, we do: (where offset is zero, or set to "offset += (copy_length + 1) & 0xfffe" in the previous loop) rx->header = get_unaligned_le32(skb->data + offset); offset += sizeof(u32); But the problematic patch calculates: offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32); rx->header = get_unaligned_le32(skb->data + offset); Adding some debug logic to check those offset calculation used to find rx->header, the one in problematic code is always too large by sizeof(u32). Thus, this patch removes the incorrect " + sizeof(u32)" addition in the problematic calculation, and resolves the issue. Cc: Dean Jenkins <Dean_Jenkins@mentor.com> Cc: "David B. Robins" <linux@davidrobins.net> Cc: Mark Craske <Mark_Craske@mentor.com> Cc: Emil Goode <emilgoode@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Ivan Vecera <ivecera@redhat.com> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Cc: stable <stable@vger.kernel.org> #4.4+ Reported-by:
Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull parallel filesystem directory handling update from Al Viro. This is the main parallel directory work by Al that makes the vfs layer able to do lookup and readdir in parallel within a single directory. That's a big change, since this used to be all protected by the directory inode mutex. The inode mutex is replaced by an rwsem, and serialization of lookups of a single name is done by a "in-progress" dentry marker. The series begins with xattr cleanups, and then ends with switching filesystems over to actually doing the readdir in parallel (switching to the "iterate_shared()" that only takes the read lock). A more detailed explanation of the process from Al Viro: "The xattr work starts with some acl fixes, then switches ->getxattr to passing inode and dentry separately. This is the point where the things start to get tricky - that got merged into the very beginning of the -rc3-based #work.lookups, to allow untangling the security_d_instantiate() mess. The xattr work itself proceeds to switch a lot of filesystems to generic_...xattr(); no complications there. After that initial xattr work, the series then does the following: - untangle security_d_instantiate() - convert a bunch of open-coded lookup_one_len_unlocked() to calls of that thing; one such place (in overlayfs) actually yields a trivial conflict with overlayfs fixes later in the cycle - overlayfs ended up switching to a variant of lookup_one_len_unlocked() sans the permission checks. I would've dropped that commit (it gets overridden on merge from #ovl-fixes in #for-next; proper resolution is to use the variant in mainline fs/overlayfs/super.c), but I didn't want to rebase the damn thing - it was fairly late in the cycle... - some filesystems had managed to depend on lookup/lookup exclusion for *fs-internal* data structures in a way that would break if we relaxed the VFS exclusion. Fixing hadn't been hard, fortunately. - core of that series - parallel lookup machinery, replacing ->i_mutex with rwsem, making lookup_slow() take it only shared. At that point lookups happen in parallel; lookups on the same name wait for the in-progress one to be done with that dentry. Surprisingly little code, at that - almost all of it is in fs/dcache.c, with fs/namei.c changes limited to lookup_slow() - making it use the new primitive and actually switching to locking shared. - parallel readdir stuff - first of all, we provide the exclusion on per-struct file basis, same as we do for read() vs lseek() for regular files. That takes care of most of the needed exclusion in readdir/readdir; however, these guys are trickier than lookups, so I went for switching them one-by-one. To do that, a new method '->iterate_shared()' is added and filesystems are switched to it as they are either confirmed to be OK with shared lock on directory or fixed to be OK with that. I hope to kill the original method come next cycle (almost all in-tree filesystems are switched already), but it's still not quite finished. - several filesystems get switched to parallel readdir. The interesting part here is dealing with dcache preseeding by readdir; that needs minor adjustment to be safe with directory locked only shared. Most of the filesystems doing that got switched to in those commits. Important exception: NFS. Turns out that NFS folks, with their, er, insistence on VFS getting the fuck out of the way of the Smart Filesystem Code That Knows How And What To Lock(tm) have grown the locking of their own. They had their own homegrown rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink is the reader there). Of course, with VFS getting the fuck out of the way, as requested, the actual smarts of the smart filesystem code etc. had become exposed... - do_last/lookup_open/atomic_open cleanups. As the result, open() without O_CREAT locks the directory only shared. Including the ->atomic_open() case. Backmerge from #for-linus in the middle of that - atomic_open() fix got brought in. - then comes NFS switch to saner (VFS-based ;-) locking, killing the homegrown "lookup and readdir are writers" kinda-sorta rwsem. All exclusion for sillyunlink/lookup is done by the parallel lookups mechanism. Exclusion between sillyunlink and rmdir is a real rwsem now - rmdir being the writer. Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel now. - the rest of the series consists of switching a lot of filesystems to parallel readdir; in a lot of cases ->llseek() gets simplified as well. One backmerge in there (again, #for-linus - rockridge fix)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits) ext4: switch to ->iterate_shared() hfs: switch to ->iterate_shared() hfsplus: switch to ->iterate_shared() hostfs: switch to ->iterate_shared() hpfs: switch to ->iterate_shared() hpfs: handle allocation failures in hpfs_add_pos() gfs2: switch to ->iterate_shared() f2fs: switch to ->iterate_shared() afs: switch to ->iterate_shared() befs: switch to ->iterate_shared() befs: constify stuff a bit isofs: switch to ->iterate_shared() get_acorn_filename(): deobfuscate a bit btrfs: switch to ->iterate_shared() logfs: no need to lock directory in lseek switch ecryptfs to ->iterate_shared 9p: switch to ->iterate_shared() fat: switch to ->iterate_shared() romfs, squashfs: switch to ->iterate_shared() more trivial ->iterate_shared conversions ...
-
Jiri Pirko authored
The problem is that fib_info->nh is [0] so the struct fib_info allocation size depends on number of nexthops. If we just copy fib_info, we do not copy the nexthops info and driver accesses memory which is not ours. Given the fact that fib4 does not defer operations and therefore it does not need copy, just pass the pointer down to drivers as it was done before. Fixes: 850d0cbc ("switchdev: remove pointers from switchdev objects") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "This update delivers: - Yet another interrupt chip diver (LPC32xx) - Core functions to handle partitioned per-cpu interrupts - Enhancements to the IPI core - Proper handling of irq type configuration - A large set of ARM GIC enhancements - The usual pile of small fixes, cleanups and enhancements" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) irqchip/bcm2836: Use a more generic memory barrier call irqchip/bcm2836: Fix compiler warning on 64-bit build irqchip/bcm2836: Drop smp_set_ops on arm64 builds irqchip/gic: Add helper functions for GIC setup and teardown irqchip/gic: Store GIC configuration parameters irqchip/gic: Pass GIC pointer to save/restore functions irqchip/gic: Return an error if GIC initialisation fails irqchip/gic: Remove static irq_chip definition for eoimode1 irqchip/gic: Don't initialise chip if mapping IO space fails irqchip/gic: WARN if setting the interrupt type for a PPI fails irqchip/gic: Don't unnecessarily write the IRQ configuration irqchip: Mask the non-type/sense bits when translating an IRQ genirq: Ensure IRQ descriptor is valid when setting-up the IRQ irqchip/gic-v3: Configure all interrupts as non-secure Group-1 irqchip/gic-v2m: Add workaround for Broadcom NS2 GICv2m erratum irqchip/irq-alpine-msi: Don't use <asm-generic/msi.h> irqchip/mbigen: Checking for IS_ERR() instead of NULL irqchip/gic-v3: Remove inexistant register definition irqchip/gicv3-its: Don't allow devices whose ID is outside range irqchip: Add LPC32xx interrupt controller driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "A rather small set of patches from the timer departement: - Some more y2038 work - Yet another new clocksource driver - The usual set of small fixes, cleanups and enhancements" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/tegra: Remove unused suspend/resume code clockevents/driversi/mps2: add MPS2 Timer driver dt-bindings: document the MPS2 timer bindings clocksource/drivers/mtk_timer: Add __init attribute clockevents/drivers/dw_apb_timer: Implement ->set_state_oneshot_stopped() time: Introduce do_sys_settimeofday64() security: Introduce security_settime64() clocksource: Add missing include of of.h.
-
Linus Torvalds authored
Merge tag 'trace-fixes-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing ring-buffer fixes from Steven Rostedt: "Hao Qin reported an integer overflow possibility with signed and unsigned numbers in the ring-buffer code. https://bugzilla.kernel.org/show_bug.cgi?id=118001 At first I did not think this was too much of an issue, because the overflow would be caught later when either too much data was allocated or it would trigger RB_WARN_ON() which shuts down the ring buffer. But looking closer into it, I found that the right settings could bypass the checks and crash the kernel. Luckily, this is only accessible by root. The first fix is to convert all the variables into long, such that we don't get into issues between 32 bit variables being assigned 64 bit ones. This fixes the RB_WARN_ON() triggering. The next fix is to get rid of a duplicate DIV_ROUND_UP() that when called twice with the right value, can cause a kernel crash. The first DIV_ROUND_UP() is to normalize the input and it is checked against the minimum allowable value. But then DIV_ROUND_UP() is called again, which can overflow due to the (a + b - 1)/b, logic. The first called upped the value, the second can overflow (with the +b part). The second call to DIV_ROUND_UP() came in via a second change a while ago and the code is cleaned up to remove it" * tag 'trace-fixes-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Prevent overflow of size in ring_buffer_resize() ring-buffer: Use long for nr_pages to avoid overflow failures
-
WANG Cong authored
We saw the following extra refcount release on veth device: kernel: [7957821.463992] unregister_netdevice: waiting for mesos50284 to become free. Usage count = -1 Since we heavily use mirred action to redirect packets to veth, I think this is caused by the following race condition: CPU0: tcf_mirred_release(): (in RCU callback) struct net_device *dev = rcu_dereference_protected(m->tcfm_dev, 1); CPU1: mirred_device_event(): spin_lock_bh(&mirred_list_lock); list_for_each_entry(m, &mirred_list, tcfm_list) { if (rcu_access_pointer(m->tcfm_dev) == dev) { dev_put(dev); /* Note : no rcu grace period necessary, as * net_device are already rcu protected. */ RCU_INIT_POINTER(m->tcfm_dev, NULL); } } spin_unlock_bh(&mirred_list_lock); CPU0: tcf_mirred_release(): spin_lock_bh(&mirred_list_lock); list_del(&m->tcfm_list); spin_unlock_bh(&mirred_list_lock); if (dev) // <======== Stil refers to the old m->tcfm_dev dev_put(dev); // <======== dev_put() is called on it again The action init code path is good because it is impossible to modify an action that is being removed. So, fix this by moving everything under the spinlock. Fixes: 2ee22a90 ("net_sched: act_mirred: remove spinlock in fast path") Fixes: 6bd00b85 ("act_mirred: fix a race condition on mirred_list") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Alpe authored
The publication field of the old netlink API should contain the publication key and not the publication reference. Fixes: 44a8ae94 (tipc: convert legacy nl name table dump to nl compat) Signed-off-by:
Richard Alpe <richard.alpe@ericsson.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto update from Herbert Xu: "API: - Crypto self tests can now be disabled at boot/run time. - Add async support to algif_aead. Algorithms: - A large number of fixes to MPI from Nicolai Stange. - Performance improvement for HMAC DRBG. Drivers: - Use generic crypto engine in omap-des. - Merge ppc4xx-rng and crypto4xx drivers. - Fix lockups in sun4i-ss driver by disabling IRQs. - Add DMA engine support to ccp. - Reenable talitos hash algorithms. - Add support for Hisilicon SoC RNG. - Add basic crypto driver for the MXC SCC. Others: - Do not allocate crypto hash tfm in NORECLAIM context in ecryptfs" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits) crypto: qat - change the adf_ctl_stop_devices to void crypto: caam - fix caam_jr_alloc() ret code crypto: vmx - comply with ABIs that specify vrsave as reserved. crypto: testmgr - Add a flag allowing the self-tests to be disabled at runtime. crypto: ccp - constify ccp_actions structure crypto: marvell/cesa - Use dma_pool_zalloc crypto: qat - make adf_vf_isr.c dependant on IOV config crypto: qat - Fix typo in comments lib: asn1_decoder - add MODULE_LICENSE("GPL") crypto: omap-sham - Use dma_request_chan() for requesting DMA channel crypto: omap-des - Use dma_request_chan() for requesting DMA channel crypto: omap-aes - Use dma_request_chan() for requesting DMA channel crypto: omap-des - Integrate with the crypto engine framework crypto: s5p-sss - fix incorrect usage of scatterlists api crypto: s5p-sss - Fix missed interrupts when working with 8 kB blocks crypto: s5p-sss - Use common BIT macro crypto: mxc-scc - fix unwinding in mxc_scc_crypto_register() crypto: mxc-scc - signedness bugs in mxc_scc_ablkcipher_req_init() crypto: talitos - fix ahash algorithms registration crypto: ccp - Ensure all dependencies are specified ...
-
Harvey Hunt authored
For ethernet devices, net_device.name will be eth%d before register_netdev() is called. Don't print the net_device name until the format string is replaced. Signed-off-by:
Harvey Hunt <harvey.hunt@imgtec.com> Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Barry Song <Baohua.Song@csr.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
This patch adds the necessary driver support for Management Firmware to configure the device/firmware with the dcbx results. Management Firmware is responsible for communicating the DCBX and driving the negotiation, but the driver has responsibility of receiving async notification and configuring the results in hw/fw. This patch also adds the dcbx support for future protocols (e.g., FCoE) as preparation to their imminent submission. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
When reopening the network device on ra7795/salvator-x, e.g. after a DHCP timeout: IP-Config: Reopening network devices... genirq: Flags mismatch irq 139. 00000000 (eth0:ch0:rx_be) vs. 00000000 (ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch0:rx_be IP-Config: Failed to open eth0 IP-Config: No network devices available The "mismatch" is due to requesting an IRQ that is already in use, while IRQF_PROBE_SHARED wasn't set. However, the real cause is that ravb_close() doesn't release any of the R-Car Gen3-specific secondary IRQs. Add the missing free_irq() calls to fix this. Fixes: f51bdc23 ("ravb: Add dma queue interrupt support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
This line was indented more than it should be. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-05-16 This series contains 2 fixes to ixgbe only. Emil fixes transmit hangs when enabling SRIOV by swapping the parameters in GENMASK in order to generate the correct mask. Alex fixes his previous patch b83e3010 ("ixgbe/ixgbevf: Add support for GSO partial") where he somehow transposed the location of setting the VLAN features in netdev->features and the configuration of the vlan_features. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Al Viro authored
Backmerge to resolve a conflict in ovl_lookup_real(); "ovl_lookup_real(): use lookup_one_len_unlocked()" instead, but it was too late in the cycle to rebase.
-
Linus Torvalds authored
Merge tag 'device-properties-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties update from Rafael Wysocki: "Generic device properties framework update. Just one commit reworking the handling of built-in properties initialization and updating a few drivers in accordance with the core framework changes" * tag 'device-properties-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: don't bother the drivers with struct property_set
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "The new features here are ACPI 6.1 support (and some previously missing bits of ACPI 6.0 support) in ACPICA and two new drivers, a driver for the ACPI Generic Event Device (GED) feature introduced by ACPI 6.1 and the INT3406 thermal driver for display thermal management. Also the value returned by the _HRV (hardware revision) ACPI object will be exported to user space via sysfs now. In addition to that, ACPI on ARM64 will not depend on EXPERT any more. The rest is mostly fixes and cleanups and some code reorganization. Specifics: - In-kernel ACPICA code update to the upstream release 20160422 adding support for ACPI 6.1 along with some previously missing bits of ACPI 6.0 support, making a fair amount of fixes and cleanups and reducing divergences between the upstream ACPICA and the in-kernel code (Bob Moore, Lv Zheng, Al Stone, Aleksey Makarov, Will Miles) - ACPI Generic Event Device (GED) support and a fix for it (Sinan Kaya, Paul Gortmaker) - INT3406 thermal driver for display thermal management and ACPI backlight support code reorganization related to it (Aaron Lu, Arnd Bergmann) - Support for exporting the value returned by the _HRV (hardware revision) ACPI object via sysfs (Betty Dall) - Removal of the EXPERT dependency for ACPI on ARM64 (Mark Brown) - Rework of the handling of ACPI _OSI mechanism allowing the _OSI("Darwin") support to be overridden from the kernel command line among other things (Lv Zheng, Chen Yu) - Rework of the ACPI tables override mechanism to prepare it for the introduction of overlays support going forward (Lv Zheng, Rafael Wysocki) - Fixes related to the ECDT support and module-level execution of AML (Lv Zheng) - ACPI PCI interrupts management update to make it work better on ARM64 mostly (Sinan Kaya) - ACPI SRAT handling update to make the code process all entires in the table order regardless of the entry type (Lukasz Anaczkowski) - EFI power off support for full-hardware ACPI platforms that don't support ACPI S5 (Chen Yu) - Fixes and cleanups related to the ACPI core's sysfs interface (Dan Carpenter, Betty Dall) - acpi_dev_present() API rework to reduce possible confusion related to it (Lukas Wunner) - Removal of CLK_IS_ROOT from two ACPI drivers (Stephen Boyd)" * tag 'acpi-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits) ACPI / video: mark acpi_video_get_levels() inline Thermal / ACPI / video: add INT3406 thermal driver ACPI / GED: make evged.c explicitly non-modular ACPI / tables: Fix DSDT override mechanism ACPI / sysfs: fix error code in get_status() ACPICA: Update version to 20160422 ACPICA: Move all ASCII utilities to a common file ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write() ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support in acpi_hw_read() ACPICA: Executer: Introduce a set of macros to handle bit width mask generation ACPICA: Hardware: Add optimized access bit width support ACPICA: Utilities: Add ACPI_IS_ALIGNED() macro ACPICA: Renamed some #defined flag constants for clarity ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptors ACPICA: ACPI 6.0: Update _BIX support for new package element ACPICA: ACPI 6.1: Support for new PCCT subtable ACPICA: Refactor evaluate_object to reduce nesting ACPICA: Divergence: remove unwanted spaces for typedef ACPI,PCI,IRQ: remove SCI penalize function ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init() ..
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Fix description of some of the bpf_asm tool related jump instructions and generally move them to format A <op> k. Reported-by:
Sebastian Amend <sebastian.amend@googlemail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ezequiel Garcia authored
Commit f748be53 ("stmmac: support new GMAC4") reverted a previous fix by mistake. This commit re-applies said fix: commit dec2165f Author: Sonic Zhang <sonic.zhang@analog.com> Date: Thu Jan 22 14:55:57 2015 +0800 stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set Clear the TX COE bit when force_thresh_dma_mode is set even hardware dma capability says support. Tested on BF609. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Tested on LPC4350 Hitex board. Fixes: f748be53 ("stmmac: support new GMAC4") Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "The majority of changes go into the cpufreq subsystem this time. To me, quite obviously, the biggest ticket item is the new "schedutil" governor. Interestingly enough, it's the first new cpufreq governor since the beginning of the git era (except for some out-of-the-tree ones). There are two main differences between it and the existing governors. First, it uses the information provided by the scheduler directly for making its decisions, so it doesn't have to track anything by itself. Second, it can invoke drivers (supporting that feature) to adjust CPU performance right away without having to spawn work items to be executed in process context or similar. Currently, the acpi-cpufreq driver is the only one supporting that mode of operation, but then it is used on a large number of systems. The "schedutil" governor as included here is very simple and mostly regarded as a foundation for future work on the integration of the scheduler with CPU power management (in fact, there is work in progress on top of it already). Nevertheless it works and the preliminary results obtained with it are encouraging. There also is some consolidation of CPU frequency management for ARM platforms that can add their machine IDs the the new stub dt-platdev driver now and that will take care of creating the requisite platform device for cpufreq-dt, so it is not necessary to do that in platform code any more. Several ARM platforms are switched over to using this generic mechanism. In addition to that, the intel_pstate driver is now going to respect CPU frequency limits set by the platform firmware (or a BMC) and provided via the ACPI _PPC object. The devfreq subsystem is getting a new "passive" governor for SoCs subsystems that will depend on somebody else to manage their voltage rails and its support for Samsung Exynos SoCs is consolidated. The rest is support for new hardware (Intel Broxton support in intel_idle for one example), bug fixes, optimizations and cleanups in a number of places. Specifics: - New cpufreq "schedutil" governor (making decisions based on CPU utilization information provided by the scheduler and capable of switching CPU frequencies right away if the underlying driver supports that) and support for fast frequency switching in the acpi-cpufreq driver (Rafael Wysocki) - Consolidation of CPU frequency management on ARM platforms allowing them to get rid of some platform-specific boilerplate code if they are going to use the cpufreq-dt driver (Viresh Kumar, Finley Xiao, Marc Gonzalez) - Support for ACPI _PPC and CPU frequency limits in the intel_pstate driver (Srinivas Pandruvada) - Fixes and cleanups in the cpufreq core and generic governor code (Rafael Wysocki, Sai Gurrappadi) - intel_pstate driver optimizations and cleanups (Rafael Wysocki, Philippe Longepe, Chen Yu, Joe Perches) - cpufreq powernv driver fixes and cleanups (Akshay Adiga, Shilpasri Bhat) - cpufreq qoriq driver fixes and cleanups (Jia Hongtao) - ACPI cpufreq driver cleanups (Viresh Kumar) - Assorted cpufreq driver updates (Ashwin Chaugule, Geliang Tang, Javier Martinez Canillas, Paul Gortmaker, Sudeep Holla) - Assorted cpufreq fixes and cleanups (Joe Perches, Arnd Bergmann) - Fixes and cleanups in the OPP (Operating Performance Points) framework, mostly related to OPP sharing, and reorganization of OF-dependent code in it (Viresh Kumar, Arnd Bergmann, Sudeep Holla) - New "passive" governor for devfreq (for SoC subsystems that will rely on someone else for the management of their power resources) and consolidation of devfreq support for Exynos platforms, coding style and typo fixes for devfreq (Chanwoo Choi, MyungJoo Ham) - PM core fixes and cleanups, mostly to make it work better with the generic power domains (genpd) framework, and updates for that framework (Ulf Hansson, Thierry Reding, Colin Ian King) - Intel Broxton support for the intel_idle driver (Len Brown) - cpuidle core optimization and fix (Daniel Lezcano, Dave Gerlach) - ARM cpuidle cleanups (Jisheng Zhang) - Intel Kabylake support for the RAPL power capping driver (Jacob Pan) - AVS (Adaptive Voltage Switching) rockchip-io driver update (Heiko Stuebner) - Updates for the cpupower tool (Arjun Sreedharan, Colin Ian King, Mattia Dongili, Thomas Renninger)" * tag 'pm-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (112 commits) intel_pstate: Clean up get_target_pstate_use_performance() intel_pstate: Use sample.core_avg_perf in get_avg_pstate() intel_pstate: Clarify average performance computation intel_pstate: Avoid unnecessary synchronize_sched() during initialization cpufreq: schedutil: Make default depend on CONFIG_SMP cpufreq: powernv: del_timer_sync when global and local pstate are equal cpufreq: powernv: Move smp_call_function_any() out of irq safe block intel_pstate: Clean up intel_pstate_get() cpufreq: schedutil: Make it depend on CONFIG_SMP cpufreq: governor: Fix handling of special cases in dbs_update() PM / OPP: Move CONFIG_OF dependent code in a separate file cpufreq: intel_pstate: Ignore _PPC processing under HWP cpufreq: arm_big_little: use generic OPP functions for {init, free}_opp_table PM / OPP: add non-OF versions of dev_pm_opp_{cpumask_, }remove_table cpufreq: tango: Use generic platdev driver PM / OPP: pass cpumask by reference cpufreq: Fix GOV_LIMITS handling for the userspace governor cpupower: fix potential memory leak PM / devfreq: style/typo fixes PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus ..
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-