- 13 Oct, 2013 18 commits
-
-
Jason Wang authored
[ Upstream commit 662ca437 ] Commit c8d68e6b (tuntap: multiqueue support) only call free_netdev() on error in tun_set_iff(). This causes several issues: - memory of tun security were leaked - use after free since the flow gc timer was not deleted and the tfile were not detached This patch solves the above issues. Reported-by:
Wannes Rombouts <wannes.rombouts@epitech.eu> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
[ Upstream commit d0fe8c88 ] I've been hitting a NULL ptr deref while using netconsole because the np->dev check and the pointer manipulation in netpoll_cleanup are done without rtnl and the following sequence happens when having a netconsole over a vlan and we remove the vlan while disabling the netconsole: CPU 1 CPU2 removes vlan and calls the notifier enters store_enabled(), calls netdev_cleanup which checks np->dev and then waits for rtnl executes the netconsole netdev release notifier making np->dev == NULL and releases rtnl continues to dereference a member of np->dev which at this point is == NULL Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Sonic Zhang authored
[ Upstream commit b0dd663b ] The received ARP request type in the Ethernet packet head is ETH_P_ARP other than ETH_P_IP. [ Bug introduced by commit b7394d24 ("netpoll: prepare for ipv6") ] Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Francois Romieu authored
[ Upstream commit 3ced8c95 ] Same narrative as eb2dc35d ("r8169: RxConfig hack for the 8168evl.") regarding AMD IOMMU errors. RTL_GIGA_MAC_VER_36 - 8168f as well - has not been reported to behave the same. Tested-by:
David R <david@unsolicited.net> Tested-by:
Frédéric Leroy <fredo@starox.org> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Vimalkumar authored
[ Upstream commit f3ad857e ] Fix a typo added in commit 56b765b7 ("htb: improved accuracy at high rates") cbuffer should not be a copy of buffer. Signed-off-by:
Vimalkumar <j.vimal@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jiri Pirko <jpirko@redhat.com> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b8678358 ] In commit 8ed78166 ("flow_keys: include thoff into flow_keys for later usage"), we missed that existing code was using nhoff as a temporary variable that could not always contain transport header offset. This is not a problem for TCP/UDP because port offset (@poff) is 0 for these protocols. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 50d1784e ] commit 416186fb ("net: Split core bits of netdev_pick_tx into __netdev_pick_tx") added a bug that disables caching of queue index in the socket. This is the source of packet reorders for TCP flows, and again this is happening more often when using FQ pacing. Old code was doing if (queue_index != old_index) sk_tx_queue_set(sk, queue_index); Alexander renamed the variables but forgot to change sk_tx_queue_set() 2nd parameter. if (queue_index != new_index) sk_tx_queue_set(sk, queue_index); This means we store -1 over and over in sk->sk_tx_queue_mapping Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 88362ad8 ] This was originally reported in [1] and posted by Neil Horman [2], he said: Fix up a missed null pointer check in the asconf code. If we don't find a local address, but we pass in an address length of more than 1, we may dereference a NULL laddr pointer. Currently this can't happen, as the only users of the function pass in the value 1 as the addrcnt parameter, but its not hot path, and it doesn't hurt to check for NULL should that ever be the case. The callpath from sctp_asconf_mgmt() looks okay. But this could be triggered from sctp_setsockopt_bindx() call with SCTP_BINDX_REM_ADDR and addrcnt > 1 while passing all possible addresses from the bind list to SCTP_BINDX_REM_ADDR so that we do *not* find a single address in the association's bind address list that is not in the packed array of addresses. If this happens when we have an established association with ASCONF-capable peers, then we could get a NULL pointer dereference as we only check for laddr == NULL && addrcnt == 1 and call later sctp_make_asconf_update_ip() with NULL laddr. BUT: this actually won't happen as sctp_bindx_rem() will catch such a case and return with an error earlier. As this is incredably unintuitive and error prone, add a check to catch at least future bugs here. As Neil says, its not hot path. Introduced by 8a07eb0a ("sctp: Add ASCONF operation on the single-homed host"). [1] http://www.spinics.net/lists/linux-sctp/msg02132.html [2] http://www.spinics.net/lists/linux-sctp/msg02133.htmlReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit a0fb05d1 ] If we do not add braces around ... mask |= POLLERR | sock_flag(sk, SOCK_SELECT_ERR_QUEUE) ? POLLPRI : 0; ... then this condition always evaluates to true as POLLERR is defined as 8 and binary or'd with whatever result comes out of sock_flag(). Hence instead of (X | Y) ? A : B, transform it into X | (Y ? A : B). Unfortunatelty, commit 8facd5fb ("net: fix smatch warnings inside datagram_poll") forgot about SCTP. :-( Introduced by 7d4c04fc ("net: add option to enable error queue packets waking select"). Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit ae7b4e1f ] When the kernel is compiled with CONFIG_IPV6_SUBTREES, and we return with an error in fn = fib6_add_1(), then error codes are encoded into the return pointer e.g. ERR_PTR(-ENOENT). In such an error case, we write the error code into err and jump to out, hence enter the if(err) condition. Now, if CONFIG_IPV6_SUBTREES is enabled, we check for: if (pn != fn && pn->leaf == rt) ... if (pn != fn && !pn->leaf && !(pn->fn_flags & RTN_RTINFO)) ... Since pn is NULL and fn is f.e. ERR_PTR(-ENOENT), then pn != fn evaluates to true and causes a NULL-pointer dereference on further checks on pn. Fix it, by setting both NULL in error case, so that pn != fn already evaluates to false and no further dereference takes place. This was first correctly implemented in 4a287eba ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag"), but the bug got later on introduced by 188c517a ("ipv6: return errno pointers consistently for fib6_add_1()"). Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Matti Vaittinen <matti.vaittinen@nsn.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit 8112b1fe ] In rfc4942 and rfc2460 I cannot find anything which would implicate to drop packets which have only padding in tlv. Current behaviour breaks TAHI Test v6LC.1.2.6. Problem was intruduced in: 9b905fe6 "ipv6/exthdrs: strict Pad1 and PadN check" Signed-off-by:
-
Dave Jones authored
[ Upstream commit e2e5c4c0 ] Signed-off-by:
Dave Jones <davej@fedoraproject.org> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Dave Jones authored
[ Upstream commit 0c1db731 ] The indentation here implies this was meant to be a multi-line if. Introduced several years back in commit c85c2951 ("caif: Handle dev_queue_xmit errors.") Signed-off-by:
-
Jiri Kosina authored
commit bc197eed upstream. 27ce4050 ("HID: fix data access in implement()") by mistake removed a setting of buffer size in hidp. Fix that by putting it back. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit 27ce4050 upstream. implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Dan Carpenter authored
commit 58f09e00 upstream. The arg64 struct has a hole after ->buf_size which isn't cleared. Or if any of the calls to copy_from_user() fail then that would cause an information leak as well. This was assigned CVE-2013-2147. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
commit 627aad1c upstream. The pciinfo struct has a two byte hole after ->dev_fn so stack information could be leaked to the user. This was assigned CVE-2013-2147. Signed-off-by:
-
Daniel Drake authored
commit 6390d885 upstream. When trying to unset a previously-set multicast list (i.e. the new list has 0 entries), mwifiex_set_multicast_list() was calling down to mwifiex_request_set_multicast_list() while leaving mcast_list.num_multicast_addr as an uninitialized value. We were arriving at mwifiex_cmd_mac_multicast_adr() which would then proceed to do an often huge memcpy of mcast_list.num_multicast_addr*ETH_ALEN bytes, causing memory corruption and hard to debug crashes. Fix this by setting mcast_list.num_multicast_addr to 0 when no multicast list is provided. Similarly, fix up the logic in mwifiex_request_set_multicast_list() to unset the multicast list that was previously sent to the hardware in such cases. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
- 05 Oct, 2013 22 commits
-
-
Greg Kroah-Hartman authored
-
Daniel Vetter authored
commit 0ce99f74 upstream. Apparently Bspec is wrong in this case here even for gm45. Note that Bspec is horribly misguided on i965g/gm, so we don't have any other data points besides that it seems to make machines work better. With this changes all the bits in PORT_HOTPLUG_STAT for the digital ports are ordered the same way. This seems to agree with what register dumps from the hpd storm handling code shows, where the LIVE bit and the short/long pulse STATUS bits light up at the same time with this enumeration (but no with the one from Bspec). Also tested on my gm45 which has two DP+ ports, and everything seems to still work as expected. References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg23054.html Cc: Egbert Eich <eich@suse.com> Cc: Jan Niggemann <jn@hz6.de> Tested-by:
Jan Niggemann <jn@hz6.de> [danvet: Add a big warning that Bspec seems to be wrong for these bits, suggested by Jani.] Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Liam Girdwood authored
commit 4028b6c4 upstream. snd_unregister_device() should return the device type and not stream direction. Signed-off-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by:
Vinod Koul <vinod.koul@intel.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Henrik Rydberg authored
commit 5f451386 upstream. After reports from Chris and Josh Boyer of a rare crash in applesmc, Guenter pointed at the initialization problem fixed below. The patch has not been verified to fix the crash, but should be applied regardless. Reported-by: <jwboyer@fedoraproject.org> Suggested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
Arnd Bergmann authored
commit 7a9caf59 upstream. When building a kernel without CONFIG_PM, we get a link error from referencing mxs_pm_init in the machine descriptor. This defines a macro to NULL for that case. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Alex Deucher authored
commit 58d327da upstream. These asics seem to use a mix of the DCE2.x and DCE3.2 audio interfaces despite what the register spec says. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=69729 https://bugs.freedesktop.org/show_bug.cgi?id=69671Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 99d79aa2 upstream. When dpm was merged, I added a new asic struct for rv6xx, but it never got properly updated when the hdmi callbacks were added due to the two patch sets being developed in parallel. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=69729Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 4a1132a0 upstream. The tests are only usable if the acceleration engines have been successfully initialized. Based on an initial patch from: Alex Ivanov <gnidorah@p0n4ik.tk> Signed-off-by:
-
Alex Ivanov authored
commit 0eb3448a upstream. Prevent NULL pointer dereference in case when radeon_ring_fini() did it's job. Reading of r100_cp_ring_info and radeon_ring_gfx debugfs entries will lead to a KP if ring buffer was deallocated, e.g. on failed ring test. Seen on PA-RISC machine having "radeon: ring test failed (scratch(0x8504)=0xCAFEDEAD)" issue. v2: agd5f: add some parens around ring->ready check Signed-off-by:
Alex Ivanov <gnidorah@p0n4ik.tk> Signed-off-by:
-
Alex Deucher authored
commit 4ca5a6cb upstream. If the user has forced the driver to use the internal GPU gart rather than AGP on an AGP card, force the buffers to vram as well. Signed-off-by:
Dieter Nützel <Dieter@nuetzel-hh.de> Signed-off-by:
-
Jani Nikula authored
commit 8d16f258 upstream. There is no clear cut rules or specs for the retry interval, as there are many factors that affect overall response time. Increase the interval, and even more so on branch devices which may have limited i2c bit rates. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=60263Tested-by:
Nicolas Suzor <nic@suzor.com> Reviewed-by:
Todd Previte <tprevite@gmail.com> Signed-off-by:
-
Daniel Vetter authored
commit 67c72a12 upstream. This regression has been introduced in commit 9f11a9e4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jun 13 00:54:58 2013 +0200 drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms Ville brough up the idea that this is just the pipe A quirk gone wrong. Note that after resume the bios might or might not have enabled pipe A already. We have a bit of magic to make sure that on resume we set up a decent mode for pipe A, but I fear if I just smash pipe A to always on we'd enable it in a bogus state and hang the hw. Hence the readback. v2: Clarify the logic a bit as suggested by Chris. Also amend the commit message to clarify why we don't unconditionally enable the pipe. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66462 References: https://lkml.org/lkml/2013/8/26/238 Cc: Meelis Roos <mroos@ut.ee> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: Use |= instead of = as suggested by Chris.] Signed-off-by:
-
NeilBrown authored
commit 3f6bbd3f upstream. This doesn't really need to be initialised, but it doesn't hurt, silences the compiler, and as it is a counter it makes sense for it to start at zero. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Mike Snitzer authored
commit f84cb8a4 upstream. Workaround the SCSI layer's problematic WRITE SAME heuristics by disabling WRITE SAME in the DM multipath device's queue_limits if an underlying device disabled it. The WRITE SAME heuristics, with both the original commit 5db44863 ("[SCSI] sd: Implement support for WRITE SAME") and the updated commit 66c28f97 ("[SCSI] sd: Update WRITE SAME heuristics"), default to enabling WRITE SAME(10) even without successfully determining it is supported. After the first failed WRITE SAME the SCSI layer will disable WRITE SAME for the device (by setting sdkp->device->no_write_same which results in 'max_write_same_sectors' in device's queue_limits to be set to 0). When a device is stacked ontop of such a SCSI device any changes to that SCSI device's queue_limits do not automatically propagate up the stack. As such, a DM multipath device will not have its WRITE SAME support disabled. This causes the block layer to continue to issue WRITE SAME requests to the mpath device which causes paths to fail and (if mpath IO isn't configured to queue when no paths are available) it will result in actual IO errors to the upper layers. This fix doesn't help configurations that have additional devices stacked ontop of the mpath device (e.g. LVM created linear DM devices ontop). A proper fix that restacks all the queue_limits from the bottom of the device stack up will need to be explored if SCSI will continue to use this model of optimistically allowing op codes and then disabling them after they fail for the first time. Before this patch: EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121) device-mapper: multipath: XXX snitm debugging: failing WRITE SAME IO with error=-121 end_request: critical target error, dev dm-6, sector 528 dm-6: WRITE SAME failed. Manually zeroing. device-mapper: multipath: Failing path 8:112. end_request: I/O error, dev dm-6, sector 4616 dm-6: WRITE SAME failed. Manually zeroing. end_request: I/O error, dev dm-6, sector 4616 end_request: I/O error, dev dm-6, sector 5640 end_request: I/O error, dev dm-6, sector 6664 end_request: I/O error, dev dm-6, sector 7688 end_request: I/O error, dev dm-6, sector 524288 Buffer I/O error on device dm-6, logical block 65536 lost page write due to I/O error on dm-6 JBD2: Error -5 detected when updating journal superblock for dm-6-8. end_request: I/O error, dev dm-6, sector 524296 Aborting journal on device dm-6-8. end_request: I/O error, dev dm-6, sector 524288 Buffer I/O error on device dm-6, logical block 65536 lost page write due to I/O error on dm-6 JBD2: Error -5 detected when updating journal superblock for dm-6-8. # cat /sys/block/sdh/queue/write_same_max_bytes 0 # cat /sys/block/dm-6/queue/write_same_max_bytes 33553920 After this patch: EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121) device-mapper: multipath: XXX snitm debugging: WRITE SAME I/O failed with error=-121 end_request: critical target error, dev dm-6, sector 528 dm-6: WRITE SAME failed. Manually zeroing. # cat /sys/block/sdh/queue/write_same_max_bytes 0 # cat /sys/block/dm-6/queue/write_same_max_bytes 0 It should be noted that WRITE SAME support wasn't enabled in DM multipath until v3.10. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Mikulas Patocka authored
commit 60e356f3 upstream. LVM2, since version 2.02.96, creates origin with zero size, then loads the snapshot driver and then loads the origin. Consequently, the snapshot driver sees the origin size zero and sets the hash size to the lower bound 64. Such small hash table causes performance degradation. This patch changes it so that the hash size is determined by the size of snapshot volume, not minimum of origin and snapshot size. It doesn't make sense to set the snapshot size significantly larger than the origin size, so we do not need to take origin size into account when calculating the hash size. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 5ea330a7 upstream. The kernel reports a lockdep warning if a snapshot is invalidated because it runs out of space. The lockdep warning was triggered by commit 0976dfc1 ("workqueue: Catch more locking problems with flush_work()") in v3.5. The warning is false positive. The real cause for the warning is that the lockdep engine treats different instances of md->lock as a single lock. This patch is a workaround - we use flush_workqueue instead of flush_work. This code path is not performance sensitive (it is called only on initialization or invalidation), thus it doesn't matter that we flush the whole workqueue. The real fix for the problem would be to teach the lockdep engine to treat different instances of md->lock as separate locks. Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Benson Leung authored
commit f123db8e upstream. The put_device(dev) at the bottom of the loop of device_shutdown may result in the dev being cleaned up. In device_create_release, the dev is kfreed. However, device_shutdown attempts to use the dev pointer again after put_device by referring to dev->parent. Copy the parent pointer instead to avoid this condition. This bug was found on Chromium OS's chromeos-3.8, which is based on v3.8.11. See bug report : https://code.google.com/p/chromium/issues/detail?id=297842 This can easily be reproduced when shutting down with hidraw devices that report battery condition. Two examples are the HP Bluetooth Mouse X4000b and the Apple Magic Mouse. For example, with the magic mouse : The dev in question is "hidraw0" dev->parent is "magicmouse" In the course of the shutdown for this device, the input event cleanup calls a put on hidraw0, decrementing its reference count. When we finally get to put_device(dev) in device_shutdown, kobject_cleanup is called and device_create_release does kfree(dev). dev->parent is no longer valid, and we may crash in put_device(dev->parent). This change should be applied on any kernel with this change : d1c6c030Signed-off-by:
Benson Leung <bleung@chromium.org> Reviewed-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Kurt Garloff authored
commit 831abf76 upstream. Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101) [1] with the Windows App (EasyNote) works natively but fails when Windows is running under KVM (and the USB device handed to KVM). The reason is a USB control message usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008 This goes to endpoint address 0x01 (wIndex); however, endpoint address 0x01 does not exist. There is an endpoint 0x81 though (same number, but other direction); the app may have meant that endpoint instead. The kernel thus rejects the IO and thus we see the failure. Apparently, Linux is more strict here than Windows ... we can't change the Win app easily, so that's a problem. It seems that the Win app/driver is buggy here and the driver does not behave fully according to the USB HID class spec that it claims to belong to. The device seems to happily deal with that though (and seems to not really care about this value much). So the question is whether the Linux kernel should filter here. Rejecting has the risk that somewhat non-compliant userspace apps/ drivers (most likely in a virtual machine) are prevented from working. Not rejecting has the risk of confusing an overly sensitive device with such a transfer. Given the fact that Windows does not filter it makes this risk rather small though. The patch makes the kernel more tolerant: If the endpoint address in wIndex does not exist, but an endpoint with toggled direction bit does, it will let the transfer through. (It does NOT change the message.) With attached patch, the app in Windows in KVM works. usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81 I suspect this will mostly affect apps in virtual environments; as on Linux the apps would have been adapted to the stricter handling of the kernel. I have done that for mine[2]. [1] http://www.pegatech.com/ [2] https://sourceforge.net/projects/notetakerpen/Signed-off-by:
Kurt Garloff <kurt@garloff.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
David Cohen authored
commit 85601f8c upstream. Add PCI id for Intel Merrifield Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
Heikki Krogerus authored
commit b62cd96d upstream. Add PCI id for Intel BayTrail. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Ramneek Mehresh authored
commit ad1260e9 upstream. For controller versions greater than 1.6, setting ULPI_PHY_CLK_SEL bit when USB_EN bit is already set causes instability issues with PHY_CLK_VLD bit. So USB_EN is set only for IP controller version below 1.6 before setting ULPI_PHY_CLK_SEL bit Signed-off-by:
Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by:
-
Al Viro authored
commit 2606b28a upstream. There's a bunch of failure exits in ffs_fs_mount() with seriously broken recovery logics. Most of that appears to stem from misunderstanding of the ->kill_sb() semantics; unlike ->put_super() it is called for *all* superblocks of given type, no matter how (in)complete the setup had been. ->put_super() is called only if ->s_root is not NULL; any failure prior to setting ->s_root will have the call of ->put_super() skipped. ->kill_sb(), OTOH, awaits every superblock that has come from sget(). Current behaviour of ffs_fs_mount(): We have struct ffs_sb_fill_data data on stack there. We do ffs_dev = functionfs_acquire_dev_callback(dev_name); and store that in data.private_data. Then we call mount_nodev(), passing it ffs_sb_fill() as a callback. That will either fail outright, or manage to call ffs_sb_fill(). There we allocate an instance of struct ffs_data, slap the value of ffs_dev (picked from data.private_data) into ffs->private_data and overwrite data.private_data by storing ffs into an overlapping member (data.ffs_data). Then we store ffs into sb->s_fs_info and attempt to set the rest of the things up (root inode, root dentry, then create /ep0 there). Any of those might fail. Should that happen, we get ffs_fs_kill_sb() called before mount_nodev() returns. If mount_nodev() fails for any reason whatsoever, we proceed to functionfs_release_dev_callback(data.ffs_data); That's broken in a lot of ways. Suppose the thing has failed in allocation of e.g. root inode or dentry. We have functionfs_release_dev_callback(ffs); ffs_data_put(ffs); done by ffs_fs_kill_sb() (ffs accessed via sb->s_fs_info), followed by functionfs_release_dev_callback(ffs); from ffs_fs_mount() (via data.ffs_data). Note that the second functionfs_release_dev_callback() has every chance to be done to freed memory. Suppose we fail *before* root inode allocation. What happens then? ffs_fs_kill_sb() doesn't do anything to ffs (it's either not called at all, or it doesn't have a pointer to ffs stored in sb->s_fs_info). And functionfs_release_dev_callback(data.ffs_data); is called by ffs_fs_mount(), but here we are in nasal daemon country - we are reading from a member of union we'd never stored into. In practice, we'll get what we used to store into the overlapping field, i.e. ffs_dev. And then we get screwed, since we treat it (struct gfs_ffs_obj * in disguise, returned by functionfs_acquire_dev_callback()) as struct ffs_data *, pick what would've been ffs_data ->private_data from it (*well* past the actual end of the struct gfs_ffs_obj - struct ffs_data is much bigger) and poke in whatever it points to. FWIW, there's a minor leak on top of all that in case if ffs_sb_fill() fails on kstrdup() - ffs is obviously forgotten. The thing is, there is no point in playing all those games with union. Just allocate and initialize ffs_data *before* calling mount_nodev() and pass a pointer to it via data.ffs_data. And once it's stored in sb->s_fs_info, clear data.ffs_data, so that ffs_fs_mount() knows that it doesn't need to kill the sucker manually - from that point on we'll have it done by ->kill_sb(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
