- 10 Oct, 2007 32 commits
-
-
Sean Hefty authored
Provide support to specify a type of service for a communication identifier. A new function call is used when dealing with IPv4 addresses. For IPv6 addresses, the ToS is specified through the traffic class field in the sockaddr_in6 structure. Signed-off-by:
Sean Hefty <sean.hefty@intel.com> [ The comments Eitan Zahavi and myself have made over the v1 post at <http://lists.openfabrics.org/pipermail/general/2007-August/039247.html> were fully addressed. ] Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Sean Hefty authored
The QoS annex defines new fields for path records. Add them to the ib_sa for consumers that want to use them. Signed-off-by:
Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by:
-
Sean Hefty authored
To support QoS within and between subnets, modify IPoIB to request specific Traffic Class values with path record queries, using the value associated with the IPoIB broadcast group. Signed-off-by:
-
Hoang-Nam Nguyen authored
Signed-off-by:
Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by:
-
Joachim Fenkes authored
Nobody needed the SVNEHCA_ prefix anyway. Signed-off-by:
-
Joachim Fenkes authored
We can use raw_smp_processor_id() here because the processor ID is only used for debug output and therefore our use is preemption-unsafe. Signed-off-by:
-
Joachim Fenkes authored
Some firmware levels exhibit a race condition between H_ALLOC_RESOURCE(MR) and H_FREE_RESOURCE(MR). Work around this problem by locking these hvCalls against each other. Signed-off-by:
-
Joachim Fenkes authored
Fix some modify_qp() issues related to path migration. Signed-off-by:
-
Joachim Fenkes authored
Signed-off-by:
-
Joachim Fenkes authored
Signed-off-by:
-
Joachim Fenkes authored
...because -12 is easier to read than FFFFFFF4. Signed-off-by:
-
Joachim Fenkes authored
Change hvcall trace output towards better readability: reg numbers instead of argument numbers, return code as signed decimal instead of unsigned hex. Signed-off-by:
-
Hoang-Nam Nguyen authored
Use Paul's new remap_4k_pfn() function to map our 4K firmware contexts into user space on 64K-page machines without exposing neighboring firmware contexts. Return the context's offset within a 64K page to user space so it can determine the proper virtual address. For details about remap_4k_pfn(), see commit 721151d0 or http://patchwork.ozlabs.org/linuxppc/patch?id=10281Signed-off-by:
-
Stefan Roscher authored
Signed-off-by:
-
Stefan Roscher authored
Signed-off-by:
-
Peter Oruba authored
These driver changes incorporate the proposed PCI-X / PCI-Express read byte count interface. Reading and setting those values doesn't take place "manually", instead wrapping functions are called to allow quirks for some PCI bridges. Signed-off by: Peter Oruba <peter.oruba@amd.com> Based on work by Stephen Hemminger <shemminger@linux-foundation.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ali Ayoub authored
ib_create_send_mad() returns an error code pointer on error, not NULL. Signed-off-by:
Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by:
-
Anton Blanchard authored
At the moment the ehca module parameters are not exported in sysfs. Export them with 0444 permissions. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by:
-
Anton Blanchard authored
ehca spits out a lot of debugging information. I had to look closely to see the "Port 1 is not active" message within all the debug: eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022) eHCA scaling code enabled ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active. ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_create_qp ehca_define_sqp() failed rc=ffffffffffffffff ib_mad: Couldn't create ib_mad QP1 ib_mad: Couldn't open ehca0 port 1 ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9 ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr rc=ffffffffffffffea pd=c000000b4b5b2420 mr_access_flags=7 fmr_attr=c0000005afd37394 fmr_create failed for FMR 0 Remove a few debug statements so that things are clearer: eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022) eHCA scaling code enabled ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active. ib_mad: Couldn't create ib_mad QP1 ib_mad: Couldn't open ehca0 port 1 ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9 fmr_create failed for FMR 0 Signed-off-by:
-
Roland Dreier authored
mlx4_srq_query() returns a big-endian 16-bit value through an int *, which screws up sparse checking. Fix this so that a CPU-endian value is returned. Signed-off-by: -
Eli Cohen authored
Clean up properly if ib_query_pkey() or ib_query_gid() fail. Signed-off-by:
Eli Cohen <eli@mellanox.co.il> Signed-off-by:
-
Eli Cohen authored
Signed-off-by:
-
Michael S. Tsirkin authored
Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by:
-
Michael S. Tsirkin authored
Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by:
-
Anton Blanchard authored
A number of printks in fmr_pool.c dont have newlines, eg: fmr_create failed for FMR 0<5>FS-Cache: Loaded Fix them up. Signed-off-by: -
Roland Dreier authored
ehca_classes.h uses struct mutex, so while <linux/mutex.h> seems to be pulled in indirectly by one of the headers it includes, the right thing is to include <linux/mutex.h> directly. Signed-off-by:
Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by:
-
Roland Dreier authored
Use a __set_data_seg() helper in mlx4_ib_post_recv() too; in addition to making the code easier to read, this also allows gcc to generate better code -- on x86_64: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8) function old new delta mlx4_ib_post_recv 359 351 -8 Signed-off-by: -
Roland Dreier authored
Special QPs are not allocated using the regular QP number bitmap, so when they are destroyed, their QP number should not be freed in the bitmap. Found by Dotan Barak of Mellanox. Signed-off-by: -
Dotan Barak authored
Rename GO_BIT_TIMEOUT to GO_BIT_TIMEOUT_MSECS for clarity, and actually use it as the go bit timeout (instead of having the define but then ignoring it and using a hard-coded 10 * HZ for the actual timeout). Signed-off-by:
Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by:
-
Roland Dreier authored
Fix sparse warning drivers/infiniband/core/device.c:142:6: warning: incorrect type in argument 1 (different signedness) drivers/infiniband/core/device.c:142:6: expected unsigned long const *addr drivers/infiniband/core/device.c:142:6: got long *[assigned] inuse by making the local variable inuse unsigned. Does not affect generated code at all. Signed-off-by: -
Roland Dreier authored
The current IPoIB code might process receive completions from ipoib_drain_cq() when bringing down the interface. This could cause packets to be passed up the stack without the device's poll method being called. Avoid this by setting the status of any successful completions to IB_WC_WR_FLUSH_ERR. Signed-off-by: -
Steve Wise authored
Allow changing parameter values without having to reload the module. This is safe because these parameters are only looked at when a new connection is established. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
- 09 Oct, 2007 7 commits
-
-
Linus Torvalds authored
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1000: set the PCI controller IO base [MIPS] Alchemy: Fix USB initialization. [MIPS] IP32: Fix fatal typo in address computation.
-
Trond Myklebust authored
The recent fix for a circular lock dependency unfortunately introduced a potential memory leak in the event where the call to nlmsvc_lookup_host fails for some reason. Thanks to Roel Kluin for spotting this. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Florian Fainelli authored
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Giuseppe Sacco authored
Signed-off-by:
Giuseppe Sacco <eppesuig@debian.org> Signed-off-by:
-
- 08 Oct, 2007 1 commit
-
-
Maarten Bressers authored
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b1287, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by:Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
