- 01 Feb, 2012 1 commit
-
-
Eric Dumazet authored
This patch makes sure we use appropriate memory barriers before publishing tp->md5sig_info, allowing tcp_md5_do_lookup() being used from tcp_v4_send_reset() without holding socket lock (upcoming patch from Shawn Lu) Note we also need to respect rcu grace period before its freeing, since we can free socket without this grace period thanks to SLAB_DESTROY_BY_RCU Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Shawn Lu <shawn.lu@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 31 Jan, 2012 10 commits
-
-
Joe Perches authored
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
alloc failures use dump_stack so emitting an additional out-of-memory message is an unnecessary duplication. Remove the allocation failure messages. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
There is no limit on number of MD5 keys an application can attach to a tcp socket. This patch adds a per tcp socket limit based on /proc/sys/net/core/optmem_max With current default optmem_max values, this allows about 150 keys on 64bit arches, and 88 keys on 32bit arches. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In order to be able to support proper RST messages for TCP MD5 flows, we need to allow access to MD5 keys without locking listener socket. This conversion is a nice cleanup, and shrinks size of timewait sockets by 80 bytes. IPv6 code reuses generic code found in IPv4 instead of duplicating it. Control path uses GFP_KERNEL allocations instead of GFP_ATOMIC. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Shawn Lu <shawn.lu@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We no longer use md5_add() method from struct tcp_sock_af_ops Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Francois Romieu authored
rtl8169_get_regs operates under RTNL and rtl task mutex whereas rtl_set_rx_mode is either called under RTNL or rtl task mutex protection. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Suggested-by:
Michał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
Simpler, more consistent, with negligible cost in non-critical paths. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Suggested-by:
Michał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
- atomic bit operations are globally visible - pending status is always cleared before execution - scheduled works are either idempotent or only required to happen once after a series of originating events, say link events for instance Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Suggested-by:
Michał Mirosław <mirqus@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
With infinite gratitude to Eric Dumazet for allowing me to identify the error. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
- 30 Jan, 2012 9 commits
-
-
-
Denys Vlasenko authored
text data bss dec hex filename 8455963 532732 1810804 10799499 a4c98b vmlinux.o.before 8448899 532732 1810804 10792435 a4adf3 vmlinux.o This change also removes commented-out copy of __nlmsg_put which was last touched in 2005 with "Enable once all users have been converted" comment on top. Changes in v2: rediffed against net-next. Signed-off-by:
Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
RFC5722 Section 4 was amended by Errata 3089 Our implementation did the right thing anyway... Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tony Zelenoff authored
Add ability to return neighbour proxies list to caller if it sent full ndmsg structure and has NTF_PROXY flag set. Before this patch (and before iproute2 patches): $ ip neigh add proxy 2001::1 dev eth0 $ ip -6 neigh show $ After it and with applied iproute2 patches: $ ip neigh add proxy 2001::1 dev eth0 $ ip -6 neigh show 2001::1 dev eth0 proxy $ Compatibility with old versions of iproute2 is not broken, kernel checks for incoming structure size and properly works if old structure is came. [v2] * changed comments style. * removed useless line with continue and curly bracket. * changed incoming message size check from equal to more or equal. CC: davem@davemloft.net CC: kuznet@ms2.inr.ac.ru CC: netdev@vger.kernel.org CC: xemul@parallels.com Signed-off-by:
Tony Zelenoff <antonz@parallels.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
This code is clearly unused, since it has a #error right in it. Given the vintage of sun3 hardware, it is probably safe to assume that there is little interest in adding new functionality to the driver now, so just delete the unused block of code. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Sam Creasey <sammy@sammy.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
The reorganization of the driver layout in drivers/net left behind some stale paths in comments and in Kconfig help text. Bring them up to date. No actual change to any code takes place here. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
Ben Hutchings authored
This function returns the page offset of the buffer, which can be calculated based on either its DMA address or its virtual address. It used to use the virtual address and we would cast that to unsigned long, as anything smaller would result in a compiler warning. Now that it's using the DMA address we should use unsigned int, matching the return type. It is also unnecessary to use __force. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com>
-
Ben Hutchings authored
<linux/mtd/mtd.h> no longer defines DEBUG so we do not need to un-define it here. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com>
-
- 29 Jan, 2012 1 commit
-
-
- 28 Jan, 2012 5 commits
-
-
David S. Miller authored
It's only used to get at neigh->primary_key, which in this context is always going to be the same as rt->rt6i_gateway. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead, compute it as-needed inside of that function using dst_neigh_lookup(). Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
In this specific situation we know we are dealing with a gatewayed route and therefore rt6i_gateway is not going to be in6addr_any even in future interpretations. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Now all code paths grab a local reference to the neigh, so if neigh is not NULL we unconditionally release it at the end. The old logic would only release if we didn't have a non-NULL 'rt'. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The conversion is very similar to that made to ipv6's SIT code. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Jan, 2012 14 commits
-
-
Francois Romieu authored
The irq handler was a mess. See 7ab87ff4 ("via-rhine: move work from irq handler to softirq and beyond") for similar changes. One can notice: - all non-napi tasks are explicitely scheduled trough a single work queue. - hiding software tx queue start behind the rtl_hw_start method is mildly natural. Move it in the caller where needed. - as can be seen from the heavy use of bh disabling locks, the driver is not safe for irq context messages with netconsole. It is still quite usable for general messaging though. Tested ok with concurrent registers dump (ethtool -d) + background traffic + "echo t > /proc/sysrq-trigger". Tested with old PCI chipset, PCIe 8168 and 810x: - XID 0c900800 RTL8168evl/8111evl - XID 18000000 RTL8168b/8111b - XID 98000000 RTL8169sc/8110sc - XID 083000c0 RTL8168d/8111d - XID 081000c0 RTL8168d/8111d - XID 00b00000 RTL8105e - XID 04a00000 RTL8102e As a side note, the comments in f11a377b ("r8169: avoid losing MSI interrupts") does not seem completely clear: if I hack the driver further to stop acking the irq link event bit, MSI interrupts keep being delivered (RTL8168b/8111b, XID 18000000). Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
Though motivated by the move of the driver to a single work queue of sequential events and removal of hard irq processing, it looks safe as a standalone change. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
I see no good reason to keep both rtl8169_reinit_task and rtl8169_reset_task: - rtl8169_reinit_task adds a software failure point which does relate to any hardware state - they handle hardware the same. Remember that rtl8169_reinit_task was introduced in the 8169 only era to handle PCI errors way before the 8168 asked for pll and firmware ops and compare : rtl8169_reinit_task | rtl8169_reset_task ----------------------------+-------------------------- rtl8169_wait_for_quiescence | rtl8169_hw_reset rtl8169_update_counters | rtl8169_wait_for_quiescence rtl8169_hw_reset | rtl_hw_start rtl8169_rx_missed | rtl8169_check_link_status rtl_pll_power_down | rtl_request_firmware | rtl8169_init_phy | rtl_pll_power_up | rtl_hw_start | rtl8169_check_link_status | Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com>
-
Francois Romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com>
-
Bruce Allan authored
Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
The generic lib.c file contains code relative to the various MACs, NVM and Manageability supported by the driver. This patch splits the file into three which are specific to those areas similar to how the PHY-specific code is in phy.c and code specific to the 80003es2lan, 8257x, and ichX MAC families are in their own files. The generic code that is applicable to all MAC/PHY parts supported by the driver remains in netdev.c, param.c and ethtool.c files. No change in functionality, just moving code around for ease of maintenance, with some whitespace and other checkpatch cleanups. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
__er16flash() is not meant to be called directly. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Convert the last instances of strncpy() to the preferred strlcpy(). Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
To ease searching for debug message strings, concatenate strings that span multiple lines even if the resulting line exceeds 80 columns; these will not cause checkpatch warnings. Also, add '\n' and remove unnecessary '\r' from a few debug strings. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
When setting the Low Power Link Up (LPLU, a.k.a. reverse auto-negotiation) on 82577/8278/82579, do not restart auto-negotiation if reset of the Phy is blocked by the Manageability Engine. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-