- 27 Aug, 2019 12 commits
-
-
Michel Thierry authored
Workaround no longer needed (plus L3_LRA_1_GPGPU doesn't exist). Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-17-lucas.demarchi@intel.com
-
José Roberto de Souza authored
On TGL some registers moved from DDI to transcoder and the DisplayPort training sequence has a separate BSpec page. I started adding 'ifs' to the original intel_ddi_pre_enable_dp() but it was becoming really hard to follow, so a new and cleaner function for TGL was added with comments of all steps. It's similar to ICL, but different enough to deserve a new function. The rest of DisplayPort enable and the whole disable sequences remained the same. v2: FEC and DSC should be enabled on sink side before start link training(Maarten reported and Manasi confirmed the DSC part) v3: Add call to enable FEC on step 7.l(Manasi) BSpec: 49190 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-16-lucas.demarchi@intel.com
-
José Roberto de Souza authored
Disable CRTC/pipes in reverse order because some features (MST in TGL+) requires master and slave relationship between pipes, so it should always pick the lowest pipe as master as it will be enabled first and disable in the reverse order so the master will be the last one to be disabled. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-13-lucas.demarchi@intel.com
-
José Roberto de Souza authored
Same as for_each_oldnew_intel_crtc_in_state() but iterates in reverse order. v2: Fix additional blank line v3: Rebase Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-12-lucas.demarchi@intel.com
-
José Roberto de Souza authored
TGL PSR2 HW supports a bigger resolution, so lets add it BSpec: 50422, 49199 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-10-lucas.demarchi@intel.com
-
José Roberto de Souza authored
This fix unclaimed access warnings: [ 245.525788] ------------[ cut here ]------------ [ 245.525884] Unclaimed read from register 0x62900 [ 245.526154] WARNING: CPU: 0 PID: 1234 at drivers/gpu/drm/i915/intel_uncore.c:1100 __unclaimed_reg_debug+0x40/0x50 [i915] [ 245.526160] Modules linked in: i915 x86_pkg_temp_thermal ax88179_178a coretemp usbnet crct10dif_pclmul mii crc32_pclmul ghash_clmulni_intel e1000e [last unloaded: i915] [ 245.526191] CPU: 0 PID: 1234 Comm: kms_fullmodeset Not tainted 5.1.0-rc6+ #915 [ 245.526197] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWR1.D00.2081.A10.1904182155 04/18/2019 [ 245.526273] RIP: 0010:__unclaimed_reg_debug+0x40/0x50 [i915] [ 245.526281] Code: 74 05 5b 5d 41 5c c3 45 84 e4 48 c7 c0 76 97 21 a0 48 c7 c6 6c 97 21 a0 89 ea 48 0f 44 f0 48 c7 c7 7f 97 21 a0 e8 4f 1e fe e0 <0f> 0b 83 2d 6f d9 1c 00 01 5b 5d 41 5c c3 66 90 41 57 41 56 41 55 [ 245.526288] RSP: 0018:ffffc900006bf7d8 EFLAGS: 00010086 [ 245.526297] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 245.526304] RDX: 0000000000000007 RSI: 0000000000000000 RDI: 00000000ffffffff [ 245.526310] RBP: 0000000000061900 R08: 0000000000000000 R09: 0000000000000001 [ 245.526317] R10: 0000000000000006 R11: 0000000000000000 R12: 0000000000000001 [ 245.526324] R13: 0000000000000000 R14: ffff8882914f0d58 R15: 0000000000000206 [ 245.526332] FS: 00007fed2a3c39c0(0000) GS:ffff8882a8600000(0000) knlGS:0000000000000000 [ 245.526340] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 245.526347] CR2: 00007fed28dff000 CR3: 00000002a086c006 CR4: 0000000000760ef0 [ 245.526354] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 245.526361] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 245.526367] PKRU: 55555554 [ 245.526373] Call Trace: [ 245.526454] gen11_fwtable_read32+0x219/0x250 [i915] [ 245.526576] intel_psr_activate+0x57/0x400 [i915] [ 245.526697] intel_psr_enable_locked+0x367/0x4b0 [i915] [ 245.526828] intel_psr_enable+0xa4/0xd0 [i915] [ 245.526946] intel_enable_ddi+0x127/0x2f0 [i915] [ 245.527075] intel_encoders_enable.isra.79+0x62/0x90 [i915] [ 245.527202] haswell_crtc_enable+0x2a2/0x850 [i915] [ 245.527337] intel_update_crtc+0x51/0x360 [i915] [ 245.527466] skl_update_crtcs+0x26c/0x300 [i915] [ 245.527603] intel_atomic_commit_tail+0x3e5/0x13c0 [i915] [ 245.527757] intel_atomic_commit+0x24d/0x2d0 [i915] [ 245.527782] drm_atomic_helper_set_config+0x7b/0x90 [ 245.527799] drm_mode_setcrtc+0x1b4/0x6f0 [ 245.527856] ? drm_mode_getcrtc+0x180/0x180 [ 245.527867] drm_ioctl_kernel+0xad/0xf0 [ 245.527886] drm_ioctl+0x2f4/0x3b0 [ 245.527902] ? drm_mode_getcrtc+0x180/0x180 [ 245.527935] ? rcu_read_lock_sched_held+0x6f/0x80 [ 245.527956] do_vfs_ioctl+0xa0/0x6d0 [ 245.527970] ? __task_pid_nr_ns+0xb6/0x200 [ 245.527991] ksys_ioctl+0x35/0x70 [ 245.528009] __x64_sys_ioctl+0x11/0x20 [ 245.528020] do_syscall_64+0x55/0x180 [ 245.528034] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 245.528042] RIP: 0033:0x7fed2cc7c3c7 [ 245.528050] Code: 00 00 90 48 8b 05 c9 3a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 99 3a 0d 00 f7 d8 64 89 01 48 [ 245.528057] RSP: 002b:00007ffe36944378 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 245.528067] RAX: ffffffffffffffda RBX: 00007ffe369443b0 RCX: 00007fed2cc7c3c7 [ 245.528074] RDX: 00007ffe369443b0 RSI: 00000000c06864a2 RDI: 0000000000000003 [ 245.528081] RBP: 00007ffe369443b0 R08: 0000000000000000 R09: 0000564c0173ae98 [ 245.528088] R10: 0000564c0173aeb8 R11: 0000000000000246 R12: 00000000c06864a2 [ 245.528095] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [ 245.528128] irq event stamp: 140866 [ 245.528138] hardirqs last enabled at (140865): [<ffffffff819a63dc>] _raw_spin_unlock_irqrestore+0x4c/0x60 [ 245.528148] hardirqs last disabled at (140866): [<ffffffff819a624d>] _raw_spin_lock_irqsave+0xd/0x50 [ 245.528158] softirqs last enabled at (140860): [<ffffffff81c0038c>] __do_softirq+0x38c/0x499 [ 245.528170] softirqs last disabled at (140853): [<ffffffff810b4a09>] irq_exit+0xa9/0xc0 [ 245.528247] WARNING: CPU: 0 PID: 1234 at drivers/gpu/drm/i915/intel_uncore.c:1100 __unclaimed_reg_debug+0x40/0x50 [i915] [ 245.528254] ---[ end trace 366069676e98a410 ]--- Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-7-lucas.demarchi@intel.com
-
José Roberto de Souza authored
On TGL+ it's possible to have PSR1 enabled in other ports besides DDIA. PSR2 is still limited to DDIA. However currently we handle only one instance of PSR struct. Lets guard intel_psr_init_dpcd() against multiple eDP panels and warn about it. v2: Reword commit message to be TGL+ only and with the info where PSR1/PSR2 are supported (Lucas) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-6-lucas.demarchi@intel.com
-
Chris Wilson authored
A virtual engine itself does not have a batch pool, but we can gleefully use any of its siblings instead. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827135935.3831-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The point of debug_object_activate is to mark the first, and only the first, acquisition. The object then remains active until the last release. However, we marked up all successful first acquires even though we allowed concurrent parties to try and acquire the i915_active simultaneously (serialised by the i915_active.mutex). Testcase: igt/gem_mmap_gtt/fault-concurrent Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827132631.18627-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we create a new live_context() we should have a mapping for each engine. Document that assumption with an assertion. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827094933.13778-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The intention is that we first try to pin the current vma into the mappable aperture only if it is already in use or it fits in the free space and will not cause contention. The first attempt was meant to be using PIN_NOEVICT to reuse the current vma if possible, following up with different eviction strategies. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111485 Fixes: 6846895f ("drm/i915: Replace PIN_NONFAULT with calls to PIN_NOEVICT") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826130750.17272-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
To properly handle asynchronous migration of batch objects, we need to couple the fences on the incoming batch into the request and should not assume that they always start idle. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826072149.9447-1-chris@chris-wilson.co.uk
-
- 26 Aug, 2019 1 commit
-
-
Lyude Paul authored
Currently, we don't call dma_set_max_seg_size() for i915 because we intentionally do not limit the segment length that the device supports. However, this results in a warning being emitted if we try to map anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG enabled: [ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] [ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220 debug_dma_map_sg+0x20f/0x340 This was originally brought up on https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus there was it wasn't really useful to set a limit (and that dma-debug isn't really all that useful for i915 in the first place). Unfortunately though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for various distro kernels. Since a WARN_ON() will disable automatic problem reporting (and cause any CI with said option enabled to start complaining), we really should just fix the problem. Note that as me and Chris Wilson discussed, the other solution for this would be to make DMA-API not make such assumptions when a driver hasn't explicitly set a maximum segment size. But, taking a look at the commit which originally introduced this behavior, commit 78c47830 ("dma-debug: check scatterlist segments"), there is an explicit mention of this assumption and how it applies to devices with no segment size: Conversely, devices which are less limited than the rather conservative defaults, or indeed have no limitations at all (e.g. GPUs with their own internal MMU), should be encouraged to set appropriate dma_parms, as they may get more efficient DMA mapping performance out of it. So unless there's any concerns (I'm open to discussion!), let's just follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit to silence any warnings. Changes since v3: * Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like just turning it on causes the kernel to spit out bogus WARN_ONs() during some igt tests which would otherwise require teaching igt to disable the various DMA-API debugging options causing this. This is too much work to be worth it, since DMA-API debugging is useless for us. So, we'll just settle with this single patch to squelch WARN_ONs() during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned on for some reason. * Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris Wilson Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.18+ Link: https://patchwork.freedesktop.org/patch/msgid/20190823205251.14298-1-lyude@redhat.com
-
- 24 Aug, 2019 2 commits
-
-
Xiaolin Zhang authored
vgpu ppgtt notification was split into 2 steps, the first step is to update PVINFO's pdp register and then write PVINFO's g2v_notify register with action code to tirgger ppgtt notification to GVT side. currently these steps were not atomic operations due to no any protection, so it is easy to enter race condition state during the MTBF, stress and IGT test to cause GPU hang. the solution is to add a lock to make vgpu ppgtt notication as atomic operation. Cc: stable@vger.kernel.org Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1566543451-13955-1-git-send-email-xiaolin.zhang@intel.com
-
Chris Wilson authored
Avoid having to pass around (ctx, engine) everywhere by passing the actual intel_context we intend to use. Today we preach this lesson to igt_gpu_fill_dw and its callers' callers. The immediate benefit for the GEM selftests is that we aim to use the GEM context as the control, the source of the engines on which to test the GEM context. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823235141.31799-1-chris@chris-wilson.co.uk
-
- 23 Aug, 2019 23 commits
-
-
Chris Wilson authored
Ensure that the drm_i915_file_private continues to exist as we attempt to remove a request from its list, which may race with the destruction of the file. <6> [38.380714] [IGT] gem_ctx_create: starting subtest basic-files <0> [42.201329] BUG: spinlock bad magic on CPU#0, kworker/u16:0/7 <4> [42.201356] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [42.201371] CPU: 0 PID: 7 Comm: kworker/u16:0 Tainted: G U 5.3.0-rc5-CI-Patchwork_14169+ #1 <4> [42.201391] Hardware name: Dell Inc. OptiPlex 745 /0GW726, BIOS 2.3.1 05/21/2007 <4> [42.201594] Workqueue: i915 retire_work_handler [i915] <4> [42.201614] RIP: 0010:spin_dump+0x5a/0x90 <4> [42.201625] Code: 00 48 8d 88 c0 06 00 00 48 c7 c7 00 71 09 82 e8 35 ef 00 00 48 85 db 44 8b 4d 08 41 b8 ff ff ff ff 48 c7 c1 0b cd 0f 82 74 0e <44> 8b 83 e0 04 00 00 48 8d 8b c0 06 00 00 8b 55 04 48 89 ee 48 c7 <4> [42.201660] RSP: 0018:ffffc9000004bd80 EFLAGS: 00010202 <4> [42.201673] RAX: 0000000000000031 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffff820fcd0b <4> [42.201688] RDX: 0000000000000000 RSI: ffff88803de266f8 RDI: 00000000ffffffff <4> [42.201703] RBP: ffff888038381ff8 R08: 00000000ffffffff R09: 000000006b6b6b6b <4> [42.201718] R10: 0000000041cb0b89 R11: 646162206b636f6c R12: ffff88802a618500 <4> [42.201733] R13: ffff88802b32c288 R14: ffff888038381ff8 R15: ffff88802b32c250 <4> [42.201748] FS: 0000000000000000(0000) GS:ffff88803de00000(0000) knlGS:0000000000000000 <4> [42.201765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [42.201778] CR2: 00007f2cefc6d180 CR3: 00000000381ee000 CR4: 00000000000006f0 <4> [42.201793] Call Trace: <4> [42.201805] do_raw_spin_lock+0x66/0xb0 <4> [42.201898] i915_request_retire+0x548/0x7c0 [i915] <4> [42.201989] retire_requests+0x4d/0x60 [i915] <4> [42.202078] i915_retire_requests+0x144/0x2e0 [i915] <4> [42.202169] retire_work_handler+0x10/0x40 [i915] Recently, in commit 44c22f3f ("drm/i915: Serialize insertion into the file->mm.request_list"), we fixed a race on insertion. Now, it appears we also have a race with destruction! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823181455.31910-1-chris@chris-wilson.co.uk
-
Daniele Ceraolo Spurio authored
First uc firmware release for EHL. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Tested-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820012327.36443-1-daniele.ceraolospurio@intel.com
-
Chris Wilson authored
Our fence management is lazy, very lazy. If the user marks an object as untiled, we do not immediately flush the fence but merely mark it as dirty. On the next use we have to remember to check and remove the fence, by which time we hope it is idle and we do not have to wait. v2: Throw away the old fence on the next ggtt_pin. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111468 Fixes: 1f7fd484 ("drm/i915: Replace i915_vma_put_fence()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823153944.20630-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
In order for the Braswell top-level PD to remain the same from the time of request construction to its submission onto HW, as we may be asynchronously rewriting the page tables (thus changing the expected register state after having already stored the old addresses in the request), the top level PD must be preallocated. So wave goodbye to our lazy allocation of those 4x2 pages. v2: A little bit of write-flushing required (presumably it always has been required, but now we are more susceptible and it is showing up!) v3: Put back the forced-PD-reload on every batch, we can't survive without it and explicitly marking the context for PD reload makes Braswell turn nasty. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823141421.2398-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Sadly lockdep records when the irqs are re-enabled and then marks up the fake lock as being irq-unsafe. Our hand is forced and so we must mark up the entire fake lock critical section as irq-off. Hopefully this is the last tweak required! v2: Not quite, we need to mark the timeline spinlock as irqsafe. That was a genuine bug being hidden by the earlier lockdep splat. Fixes: d6773926 ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823132700.25286-2-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
Use hweight8() instead of hweight32() for 8bit masks. Doesn't actually matter for us since the arch code will go for hweight32() anyway, but maybe we stil want to do this for documentation purposes? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-5-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Set a good example and talk about pipes rather than crtcs. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-4-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Replace all "int pipe"s with "enum pipe pipe"s to make it clear what we're dealing with. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-3-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
The "pipe" argument passed in by the vblank code is in fact the crtc index. Don't assume that is the same as the pipe. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-2-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
We may need to eliminate the crtc->index == pipe assumptions from the code to support arbitrary pipes being fused off. Start that by switching some bitmasks over to using pipe instead of the crtc index. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-1-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-
Stuart Summers authored
Currently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated: slice * subslice stride + subslice index / 8 v2: Fix 32-bit build v3: Use new helper function in SSEU workaround warning message v4: Use GEM_BUG_ON to force developers to use valid SSEU configurations per platform (Chris) Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-12-stuart.summers@intel.com
-
Stuart Summers authored
Add a new function to copy subslices for a specified slice between intel_sseu structures for the purpose of determining power-gate status. Note that currently ss_stride has a max of 1. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-11-stuart.summers@intel.com
-
Stuart Summers authored
Refactor instdone loops to use the new intel_sseu_has_subslice function. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-10-stuart.summers@intel.com
-
Stuart Summers authored
Add a new function to determine whether a particular slice has a given subslice. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-9-stuart.summers@intel.com
-
Stuart Summers authored
Add a subslice stride calculation when setting subslices. This aligns more closely with the userspace expectation of the subslice mask structure. v2: Use local variable for subslice_mask on HSW and clean up a few other subslice_mask local variable changes v3: Add GEM_BUG_ON for ss_stride to prevent array overflow (Chris) Split main set function and refactors in intel_device_info.c into separate patches (Chris) v4: Reduce ss_stride size check when setting subslices per slice based on actual expected max stride (Chris) Move that GEM_BUG_ON check for the ss_stride out to the patch which adds the ss_stride v5: Use memcpy instead of looping through each stride index Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-8-stuart.summers@intel.com
-
Stuart Summers authored
Add a new function to set a set of subslices for a given slice. v2: Fix typo in subslice_mask assignment Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-7-stuart.summers@intel.com
-
Stuart Summers authored
When setting up subslice_mask, instead of operating on the slice array directly, use a local variable to start bits per slice, then use this to set the per slice array in one step. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-6-stuart.summers@intel.com
-
Stuart Summers authored
Add a new SSEU runtime parameter, eu_stride, which is used to mirror the userspace concept of a range of EUs per subslice. This patch simply adds the parameter and updates usage in the QUERY_TOPOLOGY_INFO handler. v2: Add GEM_BUG_ON to make sure eu_stride is valid Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-5-stuart.summers@intel.com
-
Stuart Summers authored
Add a new parameter, ss_stride, to the runtime info structure. This is used to mirror the userspace concept of subslice stride, which is a range of subslices per slice. This patch simply adds the definition and updates usage in the QUERY_TOPOLOGY_INFO handler. v2: Add GEM_BUG_ON to make sure ss_stride is valid Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-4-stuart.summers@intel.com
-
Stuart Summers authored
Add a new function to allow each platform to set maximum slice, subslice, and EU information to reduce code duplication. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-3-stuart.summers@intel.com
-
Stuart Summers authored
Use a local variable to find SSEU runtime information in various debugfs functions. v2: Remove extra line breaks per feedback from Chris Signed-off-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190823160307.180813-2-stuart.summers@intel.com
-
Michel Thierry authored
HCP/MFX power gating is disabled by default, turn it on for the vd units available. User space will also issue a MI_FORCE_WAKEUP properly to wake up proper subwell. During driver load, init_clock_gating happens after device_info_init_mmio read the vdbox disable fuse register, so only present vd units will have these enabled. BSpec: 14214 HSDES: 1209977827 Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tony Ye <tony.ye@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-3-lucas.demarchi@intel.com
-
Michel Thierry authored
GAM registers located in the 0x4xxx range have been relocated to 0xCxxx; this is to make space for global MOCS registers. v2: Rename register and bitfield to its new name (suggested by Mika) HSD: 399379 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-2-lucas.demarchi@intel.com
-
- 22 Aug, 2019 2 commits
-
-
Manasi Navare authored
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use cpu_transcoder instead of encoder->type to select the correct DSC registers that was wrongly used in the original patch for one DSC register isntance. Fixes: 7182414e ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com
-
Anusha Srivatsa authored
DSC engine on ICL supports only 8 and 10 BPC as the input BPC. But DSC engine in TGL supports 8, 10 and 12 BPC. Add 12 BPC support for DSC while calculating compression configuration. v2: Remove the separate define TGL_DP_DSC_MAX_SUPPORTED_BPC and use the value directly.(More such defines can be removed as part of future patches). (Ville) v3: Use values directly instead of accessing the defines everytime for min and max DSC BPC. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820223059.18052-1-anusha.srivatsa@intel.com
-