- 12 Nov, 2014 20 commits
-
-
Johan Hedberg authored
The mgmt_user_passkey_request and related functions do not do anything else except read access to hdev->id. This member never changes after the hdev creation so there is no need to acquire a lock to read it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
Any code calling bt_accept_dequeue() to get a new child socket from a server socket should use lock_sock_nested to avoid lockdep warnings due to the parent and child sockets being locked at the same time. The l2cap_sock_accept() function is already doing this correctly but a second place calling bt_accept_dequeue() is the code path from l2cap_sock_teardown_cb() that calls l2cap_sock_cleanup_listen(). This patch fixes the proper nested locking annotation and thereby avoids the following style of lockdep warning. [ +0.000224] [ INFO: possible recursive locking detected ] [ +0.000222] 3.17.0+ #1153 Not tainted [ +0.000130] --------------------------------------------- [ +0.000227] l2cap-tester/562 is trying to acquire lock: [ +0.000210] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<c1393f47>] bt_accept_dequeue+0x68/0x11b [ +0.000467] but task is already holding lock: [ +0.000186] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<c13b949a>] lock_sock+0xa/0xc [ +0.000421] other info that might help us debug this: [ +0.000199] Possible unsafe locking scenario: [ +0.000117] CPU0 [ +0.000000] ---- [ +0.000000] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [ +0.000000] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [ +0.000000] *** DEADLOCK *** Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds support for setting listen before transmit mode via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes the invalid max frame retries check from driver layer. This is already handled by nl802154 framework. Also the IEEE 802.15.4 standard doesn't allow a frame retries setting above 7. This seems to be valid for the at86rf230 transceiver but the chip running out of spec then. We only allow settings according 802.15.4 right now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch add support for setting mac frame retries setting via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes the invalid check on max csma backoffs in driver layer. This is already handled by nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch add support for max csma backoffs setting via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes the invalid backoff exponent check from driver layer. This is already handled by nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds support for setting backoff exponents via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds support for setting short address via nl802154 framework. Also added a comment because a 0xffff seems to be valid address that we don't have a short address. This is a valid setting but we need more checks in upper layers to don't allow this address as source address. Also the current netlink interface doesn't allow to set the short_addr to 0xffff. Same for the 0xfffe short address which describes a not allocated short address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds support for setting pan_id via nl802154 framework. Adding a comment because setting 0xffff as pan_id seems to be valid setting. The pan_id 0xffff as source pan is invalid. I am not sure now about this setting but for the current netlink interface this is an invalid setting, so we do the same now. Maybe we need to change that when we have coordinator support and association support. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes validation of page and channel while setting from driver layer. This is already handled by nl802154 and mac802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds page and channel setting support to nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This is patch is cleanup to have a similar indentation like cfg80211 implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds a netdev notifier for interface renaming. We have a name attribute inside of subif data struct. This is needed to have always the actual netdev name in sdata name attribute. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch changes the module description like wireless which is IEEE 802.11 "subsystem" and not "implementation". Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds an unique id for an wpan_phy. This behaviour is mostly grabbed from wireless stack. This is needed for upcomming patches which identify the wpan netdev while NETDEV_CHANGENAME in netdev notify function. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
Instead of always re-lock the iflist_mtx at multiple interfaces we lock the complete for each loop at start and at the end. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch is just a cleanup to name the temporary variable for protected list for each loop as tmp. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch move the iface unregistration into iface.c file to have a behaviour which is similar like mac80211. Also iface handling should be inside iface.c file only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 11 Nov, 2014 2 commits
-
-
Johan Hedberg authored
When kfree() is all that's needed to free an object protected by RCU there's a kfree_rcu() convenience function that can be used. This patch updates the 6lowpan code to use this, thereby eliminating the need for the separate peer_free() function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This patch fixes a regression that was introduced by commit cb77c3ec. In addition to BT_CONFIG, BT_CONNECTED is also a state in which we may get a remote name and need to indicate over mgmt the connection status. This scenario is particularly likely to happen for incoming connections that do not need authentication since there the hci_conn state will reach BT_CONNECTED before the remote name is received. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 10 Nov, 2014 2 commits
-
-
Fugang Duan authored
Correct the comments in this driver. Set the CRTSCTS flag means automatic flow control is enabled. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This fixes the following sparse warning: net/bluetooth/amp.c:152:53: warning: Variable length array is used. The warning itself is probably harmless since this kind of usage of shash_desc is present also in other places in the kernel (there's even a convenience macro SHASH_DESC_ON_STACK available for defining such stack variables). However, dynamically allocated versions are also used in several places of the kernel (e.g. kernel/kexec.c and lib/digsig.c) which have the benefit of not exhibiting the sparse warning. Since there are no more sparse warnings in the Bluetooth subsystem after fixing this one it is now easier to spot whenever new ones might get introduced by future patches. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 09 Nov, 2014 15 commits
-
-
Alexander Aring authored
This patch adds a netif_running check while trying to change the address attributes via ioctl. While netif_running is true these attributes should be only readable. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds a hacked solution for an interface dump with a running lowpan interface. This will crash because lowpan and wpan interface use the same arphdr. To change the arphdr will change the UAPI, this patch checks on mtu which should on lowpan interface always different than IEEE802154_MTU. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds rtnl lock hold mechanism while accessing wpan_dev attributes. Furthermore these attributes should be protected by rtnl lock and netif_running only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes the setting of dev_addr on a monitor device. This address should be zero. A monitor should only sniff and send raw frames out. The address should be never used by upper layers and receiving frame parsing. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds support for wpan_dev dump via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds support for dumping wpan_phy attributes via nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds a basic nl802154 framework. Most of this code was grabbed from nl80211 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds the new userspace header for nl802154. We don't place this header in include/uapi now. This header could be modified in the next time. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds new sysfs entries for wpan_phy index and name. This needed for the new 802.15.4 userspace tool. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds a wpan_dev_list list into cfg802154_registered_device struct. Also adding new wpan_dev into this list while cfg802154_netdev_notifier_call. This behaviour is mostly grab from wireless core.c implementation and is needed for preparing nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds an iftype argument to the wpan_dev. This is needed to get the interface type from netdev ieee802154_ptr. The subif data struct can only accessible in mac802154 branch. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds a new cfg802154_rdev_list to remember all registered cfg802154_registered_device structs. This is needed to prepare the upcomming nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch renames the wpan_phy_alloc function to wpan_phy_new. This naming convention is like wireless and "wiphy_new" function. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes the mac_params from subif data struct. Instead we manipulate the wpan attributes directly. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch moves all mac pib attributes into the wpan_dev struct. Furthermore we can easier access these attributes over the netdev 802154_ptr pointer. Currently this is only possible over a complicated callback structure in mac802154 because subif data structure is accessable inside mac802154 only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 08 Nov, 2014 1 commit
-
-
Alexander Aring authored
This patch reverts commit: a7807d73 ("Bluetooth: 6lowpan: Avoid memory leak if memory allocation fails") which was wrong suggested by Alexander Aring. The function skb_unshare run also kfree_skb on failure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.18.x
-