- 14 Jun, 2017 9 commits
-
-
Richard Haines authored
[ Upstream commit e3ebdb20 ] When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the IP header may have moved. Also update the payload length after adding the CALIPSO option. Signed-off-by:
Richard Haines <richard_c_haines@btinternet.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Huw Davies <huw@codeweavers.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 77d4b1d3 ] Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Tested-By:
-
David S. Miller authored
[ Upstream commit e3e86b51 ] If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Mark Bloch authored
[ Upstream commit a53cb29b ] Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it. We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open(). Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") Acked-by:
Jiri Benc <jbenc@redhat.com> Tested-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Mark Bloch <markb@mellanox.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 44abafc4 ] When the sender switches its congestion control during loss recovery, if the recovery is spurious then it may incorrectly revert cwnd and ssthresh to the older values set by a previous congestion control. Consider a congestion control (like BBR) that does not use ssthresh and keeps it infinite: the connection may incorrectly revert cwnd to an infinite value when switching from BBR to another congestion control. This patch fixes it by disallowing such cwnd undo operation upon switching congestion control. Note that undo_marker is not reset s.t. the packets that were incorrectly marked lost would be corrected. We only avoid undoing the cwnd in tcp_undo_cwnd_reduction(). Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Ganesh Goudar authored
[ Upstream commit e7519f99 ] Take uld mutex to avoid race between cxgb_up() and cxgb4_register_uld() to enable napi for the same uld queue. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 6e80ac5c ] xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Lance Richardson authored
[ Upstream commit 35cf2845 ] After commit 0c1d70af ("net: use dst_cache for vxlan device"), cached dst entries could be leaked when more than one remote was present for a given vxlan_fdb entry, causing subsequent netns operations to block indefinitely and "unregister_netdevice: waiting for lo to become free." messages to appear in the kernel log. Fix by properly releasing cached dst and freeing resources in this case. Fixes: 0c1d70af ("net: use dst_cache for vxlan device") Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Mintz, Yuval authored
[ Upstream commit 3968d389 ] Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues. The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0. Fixes: ada7c19e ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
- 07 Jun, 2017 31 commits
-
-
Greg Kroah-Hartman authored
-
Jan Kara authored
commit d7fd2425 upstream. There is an off-by-one error in loop termination conditions in xfs_find_get_desired_pgoff() since 'end' may index a page beyond end of desired range if 'endoff' is page aligned. It doesn't have any visible effects but still it is good to fix it. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Eric Sandeen authored
commit a4d768e7 upstream. This structure copy was throwing unaligned access warnings on sparc64: Kernel unaligned access at TPC[1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs] xfs_btree_copy_ptrs does a memcpy, which avoids it. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
commit 3ecb3ac7 upstream. If a malicious user corrupts the refcount btree to cause a cycle between different levels of the tree, the next mount attempt will deadlock in the CoW recovery routine while grabbing buffer locks. We can use the ability to re-grab a buffer that was previous locked to a transaction to avoid deadlocks, so do that here. Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
This is a partial cherry-pick of commit e89c0413 ("xfs: implement the GETFSMAP ioctl"), which also adds this helper, and a great example of why feature patches should be properly split into their parts. Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Zorro Lang authored
commit 892d2a5f upstream. By run fsstress long enough time enough in RHEL-7, I find an assertion failure (harder to reproduce on linux-4.11, but problem is still there): XFS: Assertion failed: (iflags & BMV_IF_DELALLOC) != 0, file: fs/xfs/xfs_bmap_util.c The assertion is in xfs_getbmap() funciton: if (map[i].br_startblock == DELAYSTARTBLOCK && --> map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip))) ASSERT((iflags & BMV_IF_DELALLOC) != 0); When map[i].br_startoff == XFS_B_TO_FSB(mp, XFS_ISIZE(ip)), the startoff is just at EOF. But we only need to make sure delalloc extents that are within EOF, not include EOF. Signed-off-by:
Zorro Lang <zlang@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
commit 6eadbf4c upstream. When we're fulfilling a BMAPX request, jump out early if the data fork is in local format. This prevents us from hitting a debugging check in bmapi_read and barfing errors back to userspace. The on-disk extent count check later isn't sufficient for IF_DELALLOC mode because da extents are in memory and not on disk. Signed-off-by:
-
Brian Foster authored
commit 0daaecac upstream. The delalloc -> real block conversion path uses an incorrect calculation in the case where the middle part of a delalloc extent is being converted. This is documented as a rare situation because XFS generally attempts to maximize contiguity by converting as much of a delalloc extent as possible. If this situation does occur, the indlen reservation for the two new delalloc extents left behind by the conversion of the middle range is calculated and compared with the original reservation. If more blocks are required, the delta is allocated from the global block pool. This delta value can be characterized as the difference between the new total requirement (temp + temp2) and the currently available reservation minus those blocks that have already been allocated (startblockval(PREV.br_startblock) - allocated). The problem is that the current code does not account for previously allocated blocks correctly. It subtracts the current allocation count from the (new - old) delta rather than the old indlen reservation. This means that more indlen blocks than have been allocated end up stashed in the remaining extents and free space accounting is broken as a result. Fix up the calculation to subtract the allocated block count from the original extent indlen and thus correctly allocate the reservation delta based on the difference between the new total requirement and the unused blocks from the original reservation. Also remove a bogus assert that contradicts the fact that the new indlen reservation can be larger than the original indlen reservation. Signed-off-by:
-
Eryu Guan authored
commit 161f55ef upstream. Commit 28b783e4 ("xfs: bufferhead chains are invalid after end_page_writeback") fixed one use-after-free issue by pre-calculating the loop conditionals before calling bh->b_end_io() in the end_io processing loop, but it assigned 'next' pointer before checking end offset boundary & breaking the loop, at which point the bh might be freed already, and caused use-after-free. This is caught by KASAN when running fstests generic/127 on sub-page block size XFS. [ 2517.244502] run fstests generic/127 at 2017-04-27 07:30:50 [ 2747.868840] ================================================================== [ 2747.876949] BUG: KASAN: use-after-free in xfs_destroy_ioend+0x3d3/0x4e0 [xfs] at addr ffff8801395ae698 ... [ 2747.918245] Call Trace: [ 2747.920975] dump_stack+0x63/0x84 [ 2747.924673] kasan_object_err+0x21/0x70 [ 2747.928950] kasan_report+0x271/0x530 [ 2747.933064] ? xfs_destroy_ioend+0x3d3/0x4e0 [xfs] [ 2747.938409] ? end_page_writeback+0xce/0x110 [ 2747.943171] __asan_report_load8_noabort+0x19/0x20 [ 2747.948545] xfs_destroy_ioend+0x3d3/0x4e0 [xfs] [ 2747.953724] xfs_end_io+0x1af/0x2b0 [xfs] [ 2747.958197] process_one_work+0x5ff/0x1000 [ 2747.962766] worker_thread+0xe4/0x10e0 [ 2747.966946] kthread+0x2d3/0x3d0 [ 2747.970546] ? process_one_work+0x1000/0x1000 [ 2747.975405] ? kthread_create_on_node+0xc0/0xc0 [ 2747.980457] ? syscall_return_slowpath+0xe6/0x140 [ 2747.985706] ? do_page_fault+0x30/0x80 [ 2747.989887] ret_from_fork+0x2c/0x40 [ 2747.993874] Object at ffff8801395ae690, in cache buffer_head size: 104 [ 2748.001155] Allocated: [ 2748.003782] PID = 8327 [ 2748.006411] save_stack_trace+0x1b/0x20 [ 2748.010688] save_stack+0x46/0xd0 [ 2748.014383] kasan_kmalloc+0xad/0xe0 [ 2748.018370] kasan_slab_alloc+0x12/0x20 [ 2748.022648] kmem_cache_alloc+0xb8/0x1b0 [ 2748.027024] alloc_buffer_head+0x22/0xc0 [ 2748.031399] alloc_page_buffers+0xd1/0x250 [ 2748.035968] create_empty_buffers+0x30/0x410 [ 2748.040730] create_page_buffers+0x120/0x1b0 [ 2748.045493] __block_write_begin_int+0x17a/0x1800 [ 2748.050740] iomap_write_begin+0x100/0x2f0 [ 2748.055308] iomap_zero_range_actor+0x253/0x5c0 [ 2748.060362] iomap_apply+0x157/0x270 [ 2748.064347] iomap_zero_range+0x5a/0x80 [ 2748.068624] iomap_truncate_page+0x6b/0xa0 [ 2748.073227] xfs_setattr_size+0x1f7/0xa10 [xfs] [ 2748.078312] xfs_vn_setattr_size+0x68/0x140 [xfs] [ 2748.083589] xfs_file_fallocate+0x4ac/0x820 [xfs] [ 2748.088838] vfs_fallocate+0x2cf/0x780 [ 2748.093021] SyS_fallocate+0x48/0x80 [ 2748.097006] do_syscall_64+0x18a/0x430 [ 2748.101186] return_from_SYSCALL_64+0x0/0x6a [ 2748.105948] Freed: [ 2748.108189] PID = 8327 [ 2748.110816] save_stack_trace+0x1b/0x20 [ 2748.115093] save_stack+0x46/0xd0 [ 2748.118788] kasan_slab_free+0x73/0xc0 [ 2748.122969] kmem_cache_free+0x7a/0x200 [ 2748.127247] free_buffer_head+0x41/0x80 [ 2748.131524] try_to_free_buffers+0x178/0x250 [ 2748.136316] xfs_vm_releasepage+0x2e9/0x3d0 [xfs] [ 2748.141563] try_to_release_page+0x100/0x180 [ 2748.146325] invalidate_inode_pages2_range+0x7da/0xcf0 [ 2748.152087] xfs_shift_file_space+0x37d/0x6e0 [xfs] [ 2748.157557] xfs_collapse_file_space+0x49/0x120 [xfs] [ 2748.163223] xfs_file_fallocate+0x2a7/0x820 [xfs] [ 2748.168462] vfs_fallocate+0x2cf/0x780 [ 2748.172642] SyS_fallocate+0x48/0x80 [ 2748.176629] do_syscall_64+0x18a/0x430 [ 2748.180810] return_from_SYSCALL_64+0x0/0x6a Fixed it by checking on offset against end & breaking out first, dereference bh only if there're still bufferheads to process. Signed-off-by:
Eryu Guan <eguan@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
commit fe0be23e upstream. In xfs_reflink_end_cow, we erroneously reserve only enough blocks to handle adding 1 extent. This is problematic if we fragment free space, have to do CoW, and then have to perform multiple bmap btree expansions. Furthermore, the BUI recovery routine doesn't reserve /any/ blocks to handle btree splits, so log recovery fails after our first error causes the filesystem to go down. Therefore, refactor the transaction block reservation macros until we have a macro that works for our deferred (re)mapping activities, and fix both problems by using that macro. With 1k blocks we can hit this fairly often in g/187 if the scratch fs is big enough. Signed-off-by:
-
Brian Foster authored
commit e20c8a51 upstream. The quotaoff operation has a race with inode allocation that results in a livelock. An inode allocation that occurs before the quota status flags are updated acquires the appropriate dquots for the inode via xfs_qm_vop_dqalloc(). It then inserts the XFS_INEW inode into the perag radix tree, sometime later attaches the dquots to the inode and finally clears the XFS_INEW flag. Quotaoff expects to release the dquots from all inodes in the filesystem via xfs_qm_dqrele_all_inodes(). This invokes the AG inode iterator, which skips inodes in the XFS_INEW state because they are not fully constructed. If the scan occurs after dquots have been attached to an inode, but before XFS_INEW is cleared, the newly allocated inode will continue to hold a reference to the applicable dquots. When quotaoff invokes xfs_qm_dqpurge_all(), the reference count of those dquot(s) remain elevated and the dqpurge scan spins indefinitely. To address this problem, update the xfs_qm_dqrele_all_inodes() scan to wait on inodes marked on the XFS_INEW state. We wait on the inodes explicitly rather than skip and retry to avoid continuous retry loops due to a parallel inode allocation workload. Since quotaoff updates the quota state flags and uses a synchronous transaction before the dqrele scan, and dquots are attached to inodes after radix tree insertion iff quota is enabled, one INEW waiting pass through the AG guarantees that the scan has processed all inodes that could possibly hold dquot references. Reported-by:
-
Brian Foster authored
commit ae2c4ac2 upstream. The AG inode iterator currently skips new inodes as such inodes are inserted into the inode radix tree before they are fully constructed. Certain contexts require the ability to wait on the construction of new inodes, however. The fs-wide dquot release from the quotaoff sequence is an example of this. Update the AG inode iterator to support the ability to wait on inodes flagged with XFS_INEW upon request. Create a new xfs_inode_ag_iterator_flags() interface and support a set of iteration flags to modify the iteration behavior. When the XFS_AGITER_INEW_WAIT flag is set, include XFS_INEW flags in the radix tree inode lookup and wait on them before the callback is executed. Signed-off-by:
-
Brian Foster authored
commit 756baca2 upstream. Inodes that are inserted into the perag tree but still under construction are flagged with the XFS_INEW bit. Most contexts either skip such inodes when they are encountered or have the ability to handle them. The runtime quotaoff sequence introduces a context that must wait for construction of such inodes to correctly ensure that all dquots in the fs are released. In anticipation of this, support the ability to wait on new inodes. Wake the appropriate bit when XFS_INEW is cleared. Signed-off-by:
-
Brian Foster authored
commit 20e8a063 upstream. The quotacheck error handling of the delwri buffer list assumes the resident buffers are locked and doesn't clear the _XBF_DELWRI_Q flag on the buffers that are dequeued. This can lead to assert failures on buffer release and possibly other locking problems. Move this code to a delwri queue cancel helper function to encapsulate the logic required to properly release buffers from a delwri queue. Update the helper to clear the delwri queue flag and call it from quotacheck. Signed-off-by:
-
Brian Foster authored
commit cb52ee33 upstream. Directory block readahead uses a complex iteration mechanism to map between high-level directory blocks and underlying physical extents. This mechanism attempts to traverse the higher-level dir blocks in a manner that handles multi-fsb directory blocks and simultaneously maintains a reference to the corresponding physical blocks. This logic doesn't handle certain (discontiguous) physical extent layouts correctly with multi-fsb directory blocks. For example, consider the case of a 4k FSB filesystem with a 2 FSB (8k) directory block size and a directory with the following extent layout: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..7]: 88..95 0 (88..95) 8 1: [8..15]: 80..87 0 (80..87) 8 2: [16..39]: 168..191 0 (168..191) 24 3: [40..63]: 5242952..5242975 1 (72..95) 24 Directory block 0 spans physical extents 0 and 1, dirblk 1 lies entirely within extent 2 and dirblk 2 spans extents 2 and 3. Because extent 2 is larger than the directory block size, the readahead code erroneously assumes the block is contiguous and issues a readahead based on the physical mapping of the first fsb of the dirblk. This results in read verifier failure and a spurious corruption or crc failure, depending on the filesystem format. Further, the subsequent readahead code responsible for walking through the physical table doesn't correctly advance the physical block reference for dirblk 2. Instead of advancing two physical filesystem blocks, the first iteration of the loop advances 1 block (correctly), but the subsequent iteration advances 2 more physical blocks because the next physical extent (extent 3, above) happens to cover more than dirblk 2. At this point, the higher-level directory block walking is completely off the rails of the actual physical layout of the directory for the respective mapping table. Update the contiguous dirblock logic to consider the current offset in the physical extent to avoid issuing directory readahead to unrelated blocks. Also, update the mapping table advancing code to consider the current offset within the current dirblock to avoid advancing the mapping reference too far beyond the dirblock. Signed-off-by:
-
Eric Sandeen authored
commit 023cc840 upstream. Carlos had a case where "find" seemed to start spinning forever and never return. This was on a filesystem with non-default multi-fsb (8k) directory blocks, and a fragmented directory with extents like this: 0:[0,133646,2,0] 1:[2,195888,1,0] 2:[3,195890,1,0] 3:[4,195892,1,0] 4:[5,195894,1,0] 5:[6,195896,1,0] 6:[7,195898,1,0] 7:[8,195900,1,0] 8:[9,195902,1,0] 9:[10,195908,1,0] 10:[11,195910,1,0] 11:[12,195912,1,0] 12:[13,195914,1,0] ... i.e. the first extent is a contiguous 2-fsb dir block, but after that it is fragmented into 1 block extents. At the top of the readdir path, we allocate a mapping array which (for this filesystem geometry) can hold 10 extents; see the assignment to map_info->map_size. During readdir, we are therefore able to map extents 0 through 9 above into the array for readahead purposes. If we count by 2, we see that the last mapped index (9) is the first block of a 2-fsb directory block. At the end of xfs_dir2_leaf_readbuf() we have 2 loops to fill more readahead; the outer loop assumes one full dir block is processed each loop iteration, and an inner loop that ensures that this is so by advancing to the next extent until a full directory block is mapped. The problem is that this inner loop may step past the last extent in the mapping array as it tries to reach the end of the directory block. This will read garbage for the extent length, and as a result the loop control variable 'j' may become corrupted and never fail the loop conditional. The number of valid mappings we have in our array is stored in map->map_valid, so stop this inner loop based on that limit. There is an ASSERT at the top of the outer loop for this same condition, but we never made it out of the inner loop, so the ASSERT never fired. Huge appreciation for Carlos for debugging and isolating the problem. Debugged-and-analyzed-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
commit 52813fb1 upstream. bno should be a xfs_fsblock_t, which is 64-bit wides instead of a xfs_aglock_t, which truncates the value to 32 bits. Signed-off-by:
-
Brian Foster authored
commit 3b4683c2 upstream. Lockdep complains about use of the iolock in inode reclaim context because it doesn't understand that reclaim has the last reference to the inode, and thus an iolock->reclaim->iolock deadlock is not possible. The iolock is technically not necessary in xfs_inactive() and was only added to appease an assert in xfs_free_eofblocks(), which can be called from other non-reclaim contexts. Therefore, just kill the assert and drop the use of the iolock from reclaim context to quiet lockdep. Signed-off-by:
-
Darrick J. Wong authored
commit 84358536 upstream. Apparently FIEMAP for xattrs has been broken since we switched to the iomap backend because of an incorrect check for xattr presence. Also fix the broken locking. Signed-off-by:
-
Darrick J. Wong authored
commit be6324c0 upstream. In xfs_ioc_getbmap, we should only copy the fields of struct getbmap from userspace, or else we end up copying random stack contents into the kernel. struct getbmap is a strict subset of getbmapx, so a partial structure copy should work fine. Signed-off-by:
-
Brian Foster authored
commit 696a5620 upstream. The log covering background task used to be part of the xfssyncd workqueue. That workqueue was removed as of commit 5889608d ("xfs: syncd workqueue is no more") and the associated work item scheduled to the xfs-log wq. The latter is used for log buffer I/O completion. Since xfs_log_worker() can invoke a log flush, a deadlock is possible between the xfs-log and xfs-cil workqueues. Consider the following codepath from xfs_log_worker(): xfs_log_worker() xfs_log_force() _xfs_log_force() xlog_cil_force() xlog_cil_force_lsn() xlog_cil_push_now() flush_work() The above is in xfs-log wq context and blocked waiting on the completion of an xfs-cil work item. Concurrently, the cil push in progress can end up blocked here: xlog_cil_push_work() xlog_cil_push() xlog_write() xlog_state_get_iclog_space() xlog_wait(&log->l_flush_wait, ...) The above is in xfs-cil context waiting on log buffer I/O completion, which executes in xfs-log wq context. In this scenario both workqueues are deadlocked waiting on eachother. Add a new workqueue specifically for the high level log covering and ail pushing worker, as was the case prior to commit 5889608d. Diagnosed-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
commit bf9216f9 upstream. Fix a memory exposure problems in inumbers where we allocate an array of structures with holes, fail to zero the holes, then blindly copy the kernel memory contents (junk and all) into userspace. Signed-off-by:
-
Darrick J. Wong authored
commit 78420281 upstream. The inline directory verifiers should be called on the inode fork data, which means after iformat_local on the read side, and prior to ifork_flush on the write side. This makes the fork verifier more consistent with the way buffer verifiers work -- i.e. they will operate on the memory buffer that the code will be reading and writing directly. Furthermore, revise the verifier function to return -EFSCORRUPTED so that we don't flood the logs with corruption messages and assert notices. This has been a particular problem with xfs/348, which triggers the XFS_WANT_CORRUPTED_RETURN assertions, which halts the kernel when CONFIG_XFS_DEBUG=y. Disk corruption isn't supposed to do that, at least not in a verifier. Reviewed-by:
-
Darrick J. Wong authored
commit 630a04e7 upstream. When we're reading or writing the data fork of an inline directory, check the contents to make sure we're not overflowing buffers or eating garbage data. xfs/348 corrupts an inline symlink into an inline directory, triggering a buffer overflow bug. v2: add more checks consistent with _dir2_sf_check and make the verifier usable from anywhere. Signed-off-by:
-
Eryu Guan authored
commit 8affebe1 upstream. xfs_find_get_desired_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct. When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size XFS on x86_64 host. # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \ -c "seek -d 0" /mnt/xfs/testfile wrote 1024/1024 bytes at offset 2048 1 KiB, 1 ops; 0.0000 sec (33.675 MiB/sec and 34482.7586 ops/sec) Whence Result DATA EOF Data at offset 2k was missed, and lseek(2) returned ENXIO. This is uncovered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k. Signed-off-by:
-
Brian Foster authored
commit 63db7c81 upstream. We've had user reports of unmount hangs in xfs_wait_buftarg() that analysis shows is due to btp->bt_io_count == -1. bt_io_count represents the count of in-flight asynchronous buffers and thus should always be >= 0. xfs_wait_buftarg() waits for this value to stabilize to zero in order to ensure that all untracked (with respect to the lru) buffers have completed I/O processing before unmount proceeds to tear down in-core data structures. The value of -1 implies an I/O accounting decrement race. Indeed, the fact that xfs_buf_ioacct_dec() is called from xfs_buf_rele() (where the buffer lock is no longer held) means that bp->b_flags can be updated from an unsafe context. While a user-level reproducer is currently not available, some intrusive hacks to run racing buffer lookups/ioacct/releases from multiple threads was used to successfully manufacture this problem. Existing callers do not expect to acquire the buffer lock from xfs_buf_rele(). Therefore, we can not safely update ->b_flags from this context. It turns out that we already have separate buffer state bits and associated serialization for dealing with buffer LRU state in the form of ->b_state and ->b_lock. Therefore, replace the _XBF_IN_FLIGHT flag with a ->b_state variant, update the I/O accounting wrappers appropriately and make sure they are used with the correct locking. This ensures that buffer in-flight state can be modified at buffer release time without racing with modifications from a buffer lock holder. Fixes: 9c7504aa ("xfs: track and serialize in-flight async buffers against unmount") Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Tested-by:
Libor Pechacek <lpechacek@suse.com> Reviewed-by:
-
Jan Kara authored
commit 5375023a upstream. XFS SEEK_HOLE implementation could miss a hole in an unwritten extent as can be seen by the following command: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (49.312 MiB/sec and 12623.9856 ops/sec) wrote 8192/8192 bytes at offset 131072 8 KiB, 2 ops; 0.0000 sec (70.383 MiB/sec and 18018.0180 ops/sec) Whence Result HOLE 139264 Where we can see that hole at offset 56k was just ignored by SEEK_HOLE implementation. The bug is in xfs_find_get_desired_pgoff() which does not properly detect the case when pages are not contiguous. Fix the problem by properly detecting when found page has larger offset than expected. Fixes: d126d43fSigned-off-by:
-
Patrik Jakobsson authored
commit 82bc9a42 upstream. With LVDS we were incorrectly picking the pre-programmed mode instead of the prefered mode provided by VBT. Make sure we pick the VBT mode if one is provided. It is likely that the mode read-out code is still wrong but this patch fixes the immediate problem on most machines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.comSigned-off-by:
-
Daniel Thompson authored
commit aa2efd5e upstream. Currently when trace is enabled (e.g. slub_debug=T,kmalloc-128 ) the trace messages are mostly output at KERN_INFO. However the trace code also calls print_section() to hexdump the head of a free object. This is hard coded to use KERN_ERR, meaning the console is deluged with trace messages even if we've asked for quiet. Fix this the obvious way but adding a level parameter to print_section(), allowing calls from the trace code to use the same trace level as other trace messages. Link: http://lkml.kernel.org/r/20170113154850.518-1-daniel.thompson@linaro.orgSigned-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Acked-by:
Christoph Lameter <cl@linux.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit 478fe303 upstream. memcg_propagate_slab_attrs() abuses the sysfs attribute file functions to propagate settings from the root kmem_cache to a newly created kmem_cache. It does that with: attr->show(root, buf); attr->store(new, buf, strlen(bug); Aside of being a lazy and absurd hackery this is broken because it does not check the return value of the show() function. Some of the show() functions return 0 w/o touching the buffer. That means in such a case the store function is called with the stale content of the previous show(). That causes nonsense like invoking kmem_cache_shrink() on a newly created kmem_cache. In the worst case it would cause handing in an uninitialized buffer. This should be rewritten proper by adding a propagate() callback to those slub_attributes which must be propagated and avoid that insane conversion to and from ASCII, but that's too large for a hot fix. Check at least the return value of the show() function, so calling store() with stale content is prevented. Steven said: "It can cause a deadlock with get_online_cpus() that has been uncovered by recent cpu hotplug and lockdep changes that Thomas and Peter have been doing. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(slab_mutex); lock(cpu_hotplug.lock); lock(slab_mutex); *** DEADLOCK ***" Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705201244540.2255@nanosSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Andrea Arcangeli authored
commit a7306c34 upstream. "err" needs to be left set to -EFAULT if split_huge_page succeeds. Otherwise if "err" gets clobbered with zero and write_protect_page fails, try_to_merge_one_page() will succeed instead of returning -EFAULT and then try_to_merge_with_ksm_page() will continue thinking kpage is a PageKsm when in fact it's still an anonymous page. Eventually it'll crash in page_add_anon_rmap. This has been reproduced on Fedora25 kernel but I can reproduce with upstream too. The bug was introduced in commit f765f540 ("ksm: prepare to new THP semantics") introduced in v4.5. page:fffff67546ce1cc0 count:4 mapcount:2 mapping:ffffa094551e36e1 index:0x7f0f46673 flags: 0x2ffffc0004007c(referenced|uptodate|dirty|lru|active|swapbacked) page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) page->mem_cgroup:ffffa09674bf0000 ------------[ cut here ]------------ kernel BUG at mm/rmap.c:1222! CPU: 1 PID: 76 Comm: ksmd Not tainted 4.9.3-200.fc25.x86_64 #1 RIP: do_page_add_anon_rmap+0x1c4/0x240 Call Trace: page_add_anon_rmap+0x18/0x20 try_to_merge_with_ksm_page+0x50b/0x780 ksm_scan_thread+0x1211/0x1410 ? prepare_to_wait_event+0x100/0x100 ? try_to_merge_with_ksm_page+0x780/0x780 kthread+0xd9/0xf0 ? kthread_park+0x60/0x60 ret_from_fork+0x25/0x30 Fixes: f765f540 ("ksm: prepare to new THP semantics") Link: http://lkml.kernel.org/r/20170513131040.21732-1-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Federico Simoncelli <fsimonce@redhat.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
