- 01 Sep, 2016 1 commit
-
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2016-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * Fix P2P dump trigger * Prevent a potential null dereference in iwlmvm * Prevent an uninitialized value from being returned in iwlmvm * Advertise support for channel width change in AP mode
-
- 29 Aug, 2016 5 commits
-
-
Peer, Ilan authored
The iwlmvm driver supports channel width change in AP mode. Add the proper flag. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
fw-dbg code return ret but that variable was either 0 or not initialised. Return 0 always. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 6a951267 ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv") Signed-off-by:
-
Sharon Dvir authored
wdev_to_ieee80211_vif() might return NULL. Check that vif != NULL before dereferencing it. Signed-off-by:
Sharon Dvir <sharon.dvir@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
When the user really wanted a dump on P2P Client, he coudln't get it because we checked vif->type but didn't take vif->p2p into account. Fix that. Signed-off-by:
-
Kalle Valo authored
ath.git fixes for 4.8. Major changes: ath9k * fix regression in client mode beacon configuration * fix a station pointer which resulted in spurious crashes
-
- 24 Aug, 2016 2 commits
-
-
mhiramat@kernel.org authored
Change vif_event_lock to spinlock from mutex, since this lock is used in wait_event_timeout() via vif_event_equals(). This caused a warning report as below. As far as I can see, this lock protects regions where updating structure members, not function calls. Also, since those regions are not called from interrupt handlers (of course, it was a mutex), spin_lock is used instead of spin_lock_irqsave. [ 186.678550] ------------[ cut here ]------------ [ 186.678556] WARNING: CPU: 2 PID: 7140 at /home/mhiramat/ksrc/linux/kernel/sched/core.c:7545 __might_sleep+0x7c/0x80 [ 186.678560] do not call blocking ops when !TASK_RUNNING; state=2 set at [<ffffffff980d9090>] prepare_to_wait_event+0x60/0x100 [ 186.678560] Modules linked in: brcmfmac xt_CHECKSUM rfcomm ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_addrtype br_netfilter xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_raw ip6table_security ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_raw iptable_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_filter ip_tables x_tables bnep nls_iso8859_1 i2c_designware_platform i2c_designware_core snd_hda_codec_hdmi snd_hda_codec_realtek dcdbas snd_hda_codec_generic snd_hda_intel snd_hda_codec intel_rapl snd_hda_core x86_pkg_temp_thermal intel_powerclamp coretemp [ 186.678594] snd_pcm crct10dif_pclmul crc32_pclmul aesni_intel aes_x86_64 joydev glue_helper snd_hwdep lrw gf128mul uvcvideo ablk_helper snd_seq_midi cryptd snd_seq_midi_event snd_rawmidi videobuf2_vmalloc videobuf2_memops snd_seq input_leds videobuf2_v4l2 cfg80211 videobuf2_core snd_timer videodev serio_raw btusb snd_seq_device media btrtl rtsx_pci_ms snd mei_me memstick hid_multitouch mei soundcore brcmutil idma64 virt_dma intel_lpss_pci processor_thermal_device intel_soc_dts_iosf hci_uart btbcm btqca btintel bluetooth int3403_thermal dell_smo8800 intel_lpss_acpi intel_lpss int3402_thermal int340x_thermal_zone intel_hid mac_hid int3400_thermal shpchp sparse_keymap acpi_pad acpi_thermal_rel acpi_als kfifo_buf industrialio kvm_intel kvm irqbypass parport_pc ppdev lp parport autofs4 btrfs xor raid6_pq [ 186.678631] usbhid nouveau ttm i915 rtsx_pci_sdmmc mxm_wmi i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops psmouse drm ahci rtsx_pci nvme nvme_core libahci i2c_hid hid pinctrl_sunrisepoint video wmi pinctrl_intel fjes [last unloaded: brcmfmac] [ 186.678646] CPU: 2 PID: 7140 Comm: wpa_supplicant Not tainted 4.8.0-rc1+ #8 [ 186.678647] Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 [ 186.678648] 0000000000000000 ffff9d8c64b5b900 ffffffff98442f23 ffff9d8c64b5b950 [ 186.678651] 0000000000000000 ffff9d8c64b5b940 ffffffff9808b22b 00001d790000000d [ 186.678653] ffffffff98c75e78 000000000000026c 0000000000000000 ffff9d8c2706d058 [ 186.678655] Call Trace: [ 186.678659] [<ffffffff98442f23>] dump_stack+0x85/0xc2 [ 186.678666] [<ffffffff9808b22b>] __warn+0xcb/0xf0 [ 186.678668] [<ffffffff9808b29f>] warn_slowpath_fmt+0x4f/0x60 [ 186.678671] [<ffffffff980d9090>] ? prepare_to_wait_event+0x60/0x100 [ 186.678672] [<ffffffff980d9090>] ? prepare_to_wait_event+0x60/0x100 [ 186.678674] [<ffffffff980b922c>] __might_sleep+0x7c/0x80 [ 186.678680] [<ffffffff988b0853>] mutex_lock_nested+0x33/0x3b0 [ 186.678682] [<ffffffff980e5d8d>] ? trace_hardirqs_on+0xd/0x10 [ 186.678689] [<ffffffffc0c57d2d>] brcmf_cfg80211_wait_vif_event+0xcd/0x130 [brcmfmac] [ 186.678691] [<ffffffff980d9190>] ? wake_atomic_t_function+0x60/0x60 [ 186.678697] [<ffffffffc0c628e9>] brcmf_p2p_del_vif+0xf9/0x220 [brcmfmac] [ 186.678702] [<ffffffffc0c57fab>] brcmf_cfg80211_del_iface+0x21b/0x270 [brcmfmac] [ 186.678716] [<ffffffffc0b0539e>] nl80211_del_interface+0xfe/0x3a0 [cfg80211] [ 186.678718] [<ffffffff987ca335>] genl_family_rcv_msg+0x1b5/0x370 [ 186.678720] [<ffffffff980e5d8d>] ? trace_hardirqs_on+0xd/0x10 [ 186.678721] [<ffffffff987ca56d>] genl_rcv_msg+0x7d/0xb0 [ 186.678722] [<ffffffff987ca4f0>] ? genl_family_rcv_msg+0x370/0x370 [ 186.678724] [<ffffffff987c9a47>] netlink_rcv_skb+0x97/0xb0 [ 186.678726] [<ffffffff987ca168>] genl_rcv+0x28/0x40 [ 186.678727] [<ffffffff987c93c3>] netlink_unicast+0x1d3/0x2f0 [ 186.678729] [<ffffffff987c933b>] ? netlink_unicast+0x14b/0x2f0 [ 186.678731] [<ffffffff987c97cb>] netlink_sendmsg+0x2eb/0x3a0 [ 186.678733] [<ffffffff9876dad8>] sock_sendmsg+0x38/0x50 [ 186.678734] [<ffffffff9876e4df>] ___sys_sendmsg+0x27f/0x290 [ 186.678737] [<ffffffff9828b935>] ? mntput_no_expire+0x5/0x3f0 [ 186.678739] [<ffffffff9828b9be>] ? mntput_no_expire+0x8e/0x3f0 [ 186.678741] [<ffffffff9828b935>] ? mntput_no_expire+0x5/0x3f0 [ 186.678743] [<ffffffff9828bd44>] ? mntput+0x24/0x40 [ 186.678744] [<ffffffff98267830>] ? __fput+0x190/0x200 [ 186.678746] [<ffffffff9876f125>] __sys_sendmsg+0x45/0x80 [ 186.678748] [<ffffffff9876f172>] SyS_sendmsg+0x12/0x20 [ 186.678749] [<ffffffff988b5680>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 186.678751] [<ffffffff980e2b8f>] ? trace_hardirqs_off_caller+0x1f/0xc0 [ 186.678752] ---[ end trace e224d66c5d8408b5 ]--- Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
mhiramat@kernel.org authored
Check rtnl_lock is locked in brcmf_p2p_ifp_removed() by passing rtnl_locked flag. Actually the caller brcmf_del_if() checks whether the rtnl_lock is locked, but doesn't pass it to brcmf_p2p_ifp_removed(). Without this fix, wpa_supplicant goes softlockup with rtnl_lock holding (this means all other process using netlink are locked up too) e.g. [ 4495.876627] INFO: task wpa_supplicant:7307 blocked for more than 10 seconds. [ 4495.876632] Tainted: G W 4.8.0-rc1+ #8 [ 4495.876635] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4495.876638] wpa_supplicant D ffff974c647b39a0 0 7307 1 0x00000000 [ 4495.876644] ffff974c647b39a0 0000000000000000 ffff974c00000000 ffff974c7dc59c58 [ 4495.876651] ffff974c6b7417c0 ffff974c645017c0 ffff974c647b4000 ffffffff86f16c08 [ 4495.876657] ffff974c645017c0 0000000000000246 00000000ffffffff ffff974c647b39b8 [ 4495.876664] Call Trace: [ 4495.876671] [<ffffffff868aeccc>] schedule+0x3c/0x90 [ 4495.876676] [<ffffffff868af065>] schedule_preempt_disabled+0x15/0x20 [ 4495.876682] [<ffffffff868b0996>] mutex_lock_nested+0x176/0x3b0 [ 4495.876686] [<ffffffff867a2067>] ? rtnl_lock+0x17/0x20 [ 4495.876690] [<ffffffff867a2067>] rtnl_lock+0x17/0x20 [ 4495.876720] [<ffffffffc0ae9a5d>] brcmf_p2p_ifp_removed+0x4d/0x70 [brcmfmac] [ 4495.876741] [<ffffffffc0aebde6>] brcmf_remove_interface+0x196/0x1b0 [brcmfmac] [ 4495.876760] [<ffffffffc0ae9901>] brcmf_p2p_del_vif+0x111/0x220 [brcmfmac] [ 4495.876777] [<ffffffffc0adefab>] brcmf_cfg80211_del_iface+0x21b/0x270 [brcmfmac] [ 4495.876820] [<ffffffffc097b39e>] nl80211_del_interface+0xfe/0x3a0 [cfg80211] [ 4495.876825] [<ffffffff867ca335>] genl_family_rcv_msg+0x1b5/0x370 [ 4495.876832] [<ffffffff860e5d8d>] ? trace_hardirqs_on+0xd/0x10 [ 4495.876836] [<ffffffff867ca56d>] genl_rcv_msg+0x7d/0xb0 [ 4495.876839] [<ffffffff867ca4f0>] ? genl_family_rcv_msg+0x370/0x370 [ 4495.876846] [<ffffffff867c9a47>] netlink_rcv_skb+0x97/0xb0 [ 4495.876849] [<ffffffff867ca168>] genl_rcv+0x28/0x40 [ 4495.876854] [<ffffffff867c93c3>] netlink_unicast+0x1d3/0x2f0 [ 4495.876860] [<ffffffff867c933b>] ? netlink_unicast+0x14b/0x2f0 [ 4495.876866] [<ffffffff867c97cb>] netlink_sendmsg+0x2eb/0x3a0 [ 4495.876870] [<ffffffff8676dad8>] sock_sendmsg+0x38/0x50 [ 4495.876874] [<ffffffff8676e4df>] ___sys_sendmsg+0x27f/0x290 [ 4495.876882] [<ffffffff8628b935>] ? mntput_no_expire+0x5/0x3f0 [ 4495.876888] [<ffffffff8628b9be>] ? mntput_no_expire+0x8e/0x3f0 [ 4495.876894] [<ffffffff8628b935>] ? mntput_no_expire+0x5/0x3f0 [ 4495.876899] [<ffffffff8628bd44>] ? mntput+0x24/0x40 [ 4495.876904] [<ffffffff86267830>] ? __fput+0x190/0x200 [ 4495.876909] [<ffffffff8676f125>] __sys_sendmsg+0x45/0x80 [ 4495.876914] [<ffffffff8676f172>] SyS_sendmsg+0x12/0x20 [ 4495.876918] [<ffffffff868b5680>] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 4495.876924] [<ffffffff860e2b8f>] ? trace_hardirqs_off_caller+0x1f/0xc0 Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
- 22 Aug, 2016 2 commits
-
-
Felix Fietkau authored
A station pointer can be passed to the driver on tx, before it has been marked as associated. Since ath9k_sta_state was initializing the entry too late, it resulted in some spurious crashes. Fixes: df3c6eb3 ("ath9k: Use sta_state() callback") Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com>
-
Felix Fietkau authored
For pure station mode, iter_data.primary_beacon_vif was used and passed to ath_beacon_config, but not set to the station vif. This was causing the following warning: [ 100.310919] ------------[ cut here ]------------ [ 100.315683] WARNING: CPU: 0 PID: 7 at compat-wireless-2016-06-20/drivers/net/wireless/ath/ath9k/beacon.c:642 ath9k_calculate_summary_state+0x250/0x60c [ath9k]() [ 100.402028] CPU: 0 PID: 7 Comm: kworker/u2:1 Tainted: G W 4.4.15 #5 [ 100.409676] Workqueue: phy0 ieee80211_ibss_leave [mac80211] [ 100.415351] Stack : 8736e98c 870b4b20 87a25b54 800a6800 8782a080 80400d63 8039b96c 00000007 [ 100.415351] 803c5edc 87875914 80400000 800a47cc 87a25b54 800a6800 803a0fd8 80400000 [ 100.415351] 00000003 87875914 80400000 80094ae0 87a25b54 8787594c 00000000 801ef308 [ 100.415351] 803ffe70 801ef300 87193d58 87b3a400 87b3ad00 70687930 00000000 00000000 [ 100.415351] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 100.415351] ... [ 100.451703] Call Trace: [ 100.454235] [<800a6800>] vprintk_default+0x24/0x30 [ 100.459110] [<800a47cc>] printk+0x2c/0x38 [ 100.463190] [<800a6800>] vprintk_default+0x24/0x30 [ 100.468072] [<80094ae0>] print_worker_info+0x148/0x174 [ 100.473378] [<801ef308>] serial8250_console_putchar+0x0/0x44 [ 100.479122] [<801ef300>] wait_for_xmitr+0xc4/0xcc [ 100.484014] [<87193d58>] ieee80211_ibss_leave+0xb90/0x1900 [mac80211] [ 100.490590] [<80081604>] warn_slowpath_common+0xa0/0xd0 [ 100.495922] [<801a359c>] dump_stack+0x14/0x28 [ 100.500350] [<80071a00>] show_stack+0x50/0x84 [ 100.504784] [<80081604>] warn_slowpath_common+0xa0/0xd0 [ 100.510106] [<87024c60>] ath9k_calculate_summary_state+0x250/0x60c [ath9k] [ 100.517105] [<800816b8>] warn_slowpath_null+0x18/0x24 [ 100.522256] [<87024c60>] ath9k_calculate_summary_state+0x250/0x60c [ath9k] [ 100.529273] [<87025418>] ath9k_set_txpower+0x148/0x498 [ath9k] [ 100.535302] [<871d2c64>] cleanup_module+0xa74/0xd4c [mac80211] [ 100.541237] [<801ef308>] serial8250_console_putchar+0x0/0x44 [ 100.547042] [<800a5d18>] wake_up_klogd+0x54/0x68 [ 100.551730] [<800a6650>] vprintk_emit+0x404/0x43c [ 100.556623] [<871b9db8>] ieee80211_sta_rx_notify+0x258/0x32c [mac80211] [ 100.563475] [<871ba6a4>] ieee80211_sta_rx_queued_mgmt+0x63c/0x734 [mac80211] [ 100.570693] [<871aa49c>] ieee80211_tx_prepare_skb+0x210/0x230 [mac80211] [ 100.577609] [<800af5d4>] mod_timer+0x15c/0x190 [ 100.582220] [<871ba8b8>] ieee80211_sta_work+0xfc/0xe1c [mac80211] [ 100.588539] [<871940b4>] ieee80211_ibss_leave+0xeec/0x1900 [mac80211] [ 100.595122] [<8009ec84>] dequeue_task_fair+0x44/0x130 [ 100.600281] [<80092a34>] process_one_work+0x1f8/0x334 [ 100.605454] [<80093830>] worker_thread+0x2b4/0x408 [ 100.610317] [<8009357c>] worker_thread+0x0/0x408 [ 100.615019] [<8009357c>] worker_thread+0x0/0x408 [ 100.619705] [<80097b68>] kthread+0xdc/0xe8 [ 100.623886] [<80097a8c>] kthread+0x0/0xe8 [ 100.627961] [<80060878>] ret_from_kernel_thread+0x14/0x1c [ 100.633448] [ 100.634956] ---[ end trace aafbe57e9ae6862f ]--- Fixes: cfda2d8e ("ath9k: Fix beacon configuration for addition/removal of interfaces") Signed-off-by:
-
- 18 Aug, 2016 2 commits
-
-
Cathy Luo authored
Sometimes host prepares and downloads a large amsdu packet to firmware which leads to a memory corruption in firmware. The reason is __dev_alloc_skb() may allocate larger buffer than required size. This patch solves the problem by checking "adapter->tx_buf_size" instead of relying on skb_tailroom(). Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix Fietkau. 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme. 3) Fix some tg3 ethtool logic bugs, and one that would cause no interrupts to be generated when rx-coalescing is set to 0. From Satish Baddipadige and Siva Reddy Kallam. 4) QLCNIC mailbox corruption and napi budget handling fix from Manish Chopra. 5) Fix fib_trie logic when walking the trie during /proc/net/route output than can access a stale node pointer. From David Forster. 6) Several sctp_diag fixes from Phil Sutter. 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel. 8) Checksum fixup fixes in bpf from Daniel Borkmann. 9) Memork leaks in nfnetlink, from Liping Zhang. 10) Use after free in rxrpc, from David Howells. 11) Use after free in new skb_array code of macvtap driver, from Jason Wang. 12) Calipso resource leak, from Colin Ian King. 13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang. 14) Fix bpf non-linear packet write helpers, from Daniel Borkmann. 15) Fix lockdep splats in macsec, from Sabrina Dubroca. 16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF handling. 17) Various tc-action bug fixes, from CONG Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net_sched: allow flushing tc police actions net_sched: unify the init logic for act_police net_sched: convert tcf_exts from list to pointer array net_sched: move tc offload macros to pkt_cls.h net_sched: fix a typo in tc_for_each_action() net_sched: remove an unnecessary list_del() net_sched: remove the leftover cleanup_a() mlxsw: spectrum: Allow packets to be trapped from any PG mlxsw: spectrum: Unmap 802.1Q FID before destroying it mlxsw: spectrum: Add missing rollbacks in error path mlxsw: reg: Fix missing op field fill-up mlxsw: spectrum: Trap loop-backed packets mlxsw: spectrum: Add missing packet traps mlxsw: spectrum: Mark port as active before registering it mlxsw: spectrum: Create PVID vPort before registering netdevice mlxsw: spectrum: Remove redundant errors from the code mlxsw: spectrum: Don't return upon error in removal path i40e: check for and deal with non-contiguous TCs ixgbe: Re-enable ability to toggle VLAN filtering ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths ...
-
- 17 Aug, 2016 21 commits
-
-
David S. Miller authored
Cong Wang says: ==================== net_sched: tc action fixes and updates This patchset fixes a few regressions caused by the previous code refactor and more. Thanks to Jamal for catching them! Note, patch 3/7 and 4/7 are not strictly necessary for this patchset, I just want to carry them together. --- v4: adjust an indention for Jamal add two more patches v3: avoid list for fast path, suggested by Jamal v2: replace flex_array with regular dynamic array keep tcf_action_stats_update() in act_api.h fix macro typos found by Amir ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
The act_police uses its own code to walk the action hashtable, which leads to that we could not flush standalone tc police actions, so just switch to tcf_generic_walker() like other actions. (Joint work from Roman and Cong.) Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
WANG Cong authored
Jamal reported a crash when we create a police action with a specific index, this is because the init logic is not correct, we should always create one for this case. Just unify the logic with other tc actions. Fixes: a03e6fe5 ("act_police: fix a crash during removal") Reported-by:
-
WANG Cong authored
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970a ("net_sched: move tc_action into tcf_common") Reported-by:
-
WANG Cong authored
struct tcf_exts belongs to filters, should not be visible to plain tc actions. Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
WANG Cong authored
It is harmless because all users pass 'a' to this macro. Fixes: 00175aec ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Cc: Amir Vadai <amir@vadai.me> Signed-off-by:
-
WANG Cong authored
This list_del() for tc action is not needed actually, because we only use this list to chain bulk operations, therefore should not be carried for latter operations. Fixes: ec0595cc ("net_sched: get rid of struct tcf_common") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
WANG Cong authored
After refactoring tc_action into tcf_common, we no longer need to cleanup temporary "actions" in list, they are permanently stored in the hashtable. Fixes: a85a970a ("net_sched: move tc_action into tcf_common") Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-08-16 This series contains fixes to e1000e, igb, ixgbe and i40e. Kshitiz Gupta provides a fix for igb to resolve the PHY delay compensation math in several functions. Jarod Wilson provides a fix for e1000e which had to broken up into 2 patches, first is prepares the driver for expanding the list of NICs that have occasional ~10 hour clock jumps when being used for PTP. Second patch actually fixes i218 silicon which has been experiencing the clock jumps while using PTP. Alex provides 2 patches for ixgbe now that he is back at Intel. First fixes setting VLNCTRL.VFE bit, which was left unchanged in earlier patches which resulted in disabling VLAN filtering for all the VFs. Second corrects the support for disabling the VLAN tag filtering via the feature bit. Lastly, David fixes i40e which was causing a kernel panic when non-contiguous traffic classes or traffic classes not starting with TC0, were configured on a link partner switch. To fix this, changed the logic when determining the total number of TCs enabled. ==================== Signed-off-by: -
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: IPv4 UC router fixes Ido says: Patches 1-3 fix a long standing problem in the driver's init sequence, which manifests itself quite often when routing daemons try to configure an IP address on registered netdevs that don't yet have an associated vPort. Patches 4-9 add missing packet traps for the router to work properly and also fix ordering issue following the recent changes to the driver's init sequence. The last patch isn't related to the router, but fixes a general problem in which under certain conditions packets aren't trapped to CPU. v1->v2: - Change order of patch 7 - Add patch 6 following Ilan's comment - Add patchset name and cover letter ==================== Signed-off-by: -
Ido Schimmel authored
When packets enter the device they are classified to a priority group (PG) buffer based on their PCP value. After their egress port and traffic class are determined they are moved to the switch's shared buffer and await transmission, if: (Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres && Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres) || (Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min || Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min) Packets scheduled to transmission through CPU port (trapped to CPU) use traffic class 7, which has a zero maximum and minimum quotas. However, when such packets arrive from PG 0 they are admitted to the shared buffer as PG 0 has a non-zero minimum quota. Allow all packets to be trapped to the CPU - regardless of the PG they were classified to - by assigning a 10KB minimum quota for CPU port and TC7. Fixes: 8e8dfe9f ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Reported-by:Tamir Winetroub <tamirw@mellanox.com> Tested-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Before destroying the 802.1Q FID we should first remove the VID-to-FID mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to mlxsw_sp_fid_create(). Fixes: 14d39461 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by:
-
Ido Schimmel authored
While going over the code I noticed we are missing two rollbacks in the port's creation error path. Add them and adjust the place of one of them in the port's removal sequence so that both are symmetric. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
-
Jiri Pirko authored
Ralue pack function needs to set op, otherwise it is 0 for add always. Fixes: d5a1c749 ("mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition") Signed-off-by:
-
Ido Schimmel authored
One of the conditions to generate an ICMP Redirect Message is that "the packet is being forwarded out the same physical interface that it was received from" (RFC 1812). Therefore, we need to be able to trap such packets and let the kernel decide what to do with them. For each RIF, enable the loop-back filter, which will raise the LBERROR trap whenever the ingress RIF equals the egress RIF. Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Reported-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
-
Elad Raz authored
Add the following traps: 1) MTU Error: Trap packets whose size is bigger than the egress RIF's MTU. If DF bit isn't set, traffic will continue to be routed in slow path. 2) TTL Error: Trap packets whose TTL expired. This allows traceroute to work properly. 3) OSPF packets. Fixes: 7b27ce7b ("mlxsw: spectrum: Add traps needed for router implementation") Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Commit bbf2a475 ("mlxsw: spectrum: Initialize ports at the end of init sequence") moved ports initialization to the end of the init sequence, which means ports are the first to be removed during fini. Since the FDB delayed work is still active when ports are removed it's possible for it to process FDB notifications of inactive ports, resulting in a warning message. Fix that by marking ports as inactive only after unregistering them. The NETDEV_UNREGISTER event will invoke bridge's driver port removal sequence that will cause the FDB (and FDB notifications) to be flushed. Fixes: bbf2a475 ("mlxsw: spectrum: Initialize ports at the end of init sequence") Signed-off-by:
-
Ido Schimmel authored
After registering a netdevice it's possible for user space applications to configure an IP address on it. From the driver's perspective, this means a router interface (RIF) should be created for the PVID vPort. Therefore, we must create the PVID vPort before registering the netdevice. Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
-
Ido Schimmel authored
Currently, when device configuration fails we emit errors to the kernel log despite the fact we already get these from the EMAD transaction layer, so remove them. In addition to being unnecessary, removing these error messages will allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort before registering the netdevice. Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
-
Ido Schimmel authored
When removing a VLAN filter from the device we shouldn't return upon the first error we encounter, as otherwise we'll have resources that will never be freed nor used. Instead, we should keep trying to free as much resources as possible in a best effort mode. Remove the error message as well, since we already get these from the EMAD transaction code. Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply fixes from Sebastian Reichel. * tag 'for-v4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power_supply: tps65217-charger: fix missing platform_set_drvdata() power: reset: hisi-reboot: Unmap region obtained by of_iomap power: reset: reboot-mode: fix build error of missing ioremap/iounmap on UM power: supply: max17042_battery: fix model download bug.
-
- 16 Aug, 2016 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio/vhost fixes from Michael Tsirkin: - test fixes - a vsock fix * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add dma stubs vhost/test: fix after swiotlb changes vhost/vsock: drop space available check for TX vq ringtest: test build fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes, minor cleanup and a change to the default config" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: fix failing CUIR assignment under LPAR s390/pageattr: handle numpages parameter correctly s390/dasd: fix hanging device after clear subchannel s390/qdio: avoid reschedule of outbound tasklet once killed s390/qdio: remove checks for ccw device internal state s390/qdio: fix double return code evaluation s390/qdio: get rid of spin_lock_irqsave usage s390/cio: remove subchannel_id from ccw_device_private s390/qdio: obtain subchannel_id via ccw_device_get_schid() s390/cio: stop using subchannel_id from ccw_device_private s390/config: make the vector optimized crc function builtin s390/lib: fix memcmp and strstr s390/crc32-vx: Fix checksum calculation for small sizes s390: clarify compressed image code path
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Missing ULL suffixes for 64-bit constants in sha3. - Two caam AEAD regressions. - Bogus setkey hooks in non-hmac caam hashes. - Missing kbuild dependency for powerpc crc32c" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix non-hmac hashes crypto: powerpc - CRYPT_CRC32C_VPMSUM should depend on ALTIVEC crypto: caam - defer aead_set_sh_desc in case of zero authsize crypto: caam - fix echainiv(authenc) encrypt shared descriptor crypto: sha3 - Add missing ULL suffixes for 64-bit constants
-
Dave Ertman authored
The i40e driver was causing a kernel panic when non-contiguous Traffic Classes, or Traffic Classes not starting with TC0, were configured on a link partner switch. i40e does not support non-contiguous TCs. To fix this, the patch changes the logic when determining the total number of TCs enabled. Before, this would use the highest TC number enabled and assume that all TCs below it were also enabled. Now, we create a bitmask of enabled TCs and scan it to determine not only the number of TCs, but also if the set of enabled TCs starts at zero and is contiguous. If not, then DCB is disabled by only returning one TC. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
Back when I submitted the GSO code I messed up and dropped the support for disabling the VLAN tag filtering via the feature bit. This patch re-enables the use of the NETIF_F_HW_VLAN_CTAG_FILTER to enable/disable the VLAN filtering independent of toggling promiscuous mode. Fixes: b83e3010 ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Alexander Duyck authored
When I was adding the code for enabling VLAN promiscuous mode with SR-IOV enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has assumed there was code in another path that was setting it when we enabled SR-IOV. This wasn't the case and as a result we were just disabling VLAN filtering for all the VFs apparently. Also the previous patches were always clearing CFIEN which was always set to 0 by the hardware anyway so I am dropping the redundant bit clearing. Fixes: 16369564 ("ixgbe: Add support for VLAN promiscuous with SR-IOV") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Here are a few pin control fixes for the v4.8 series, nothing special about them: - Add the missing <linux/io.h> header to the Intel Merrifield driver to get rid of build mess. - Drop two instances of pinctrl_unregister() called for drivers using devm_* resource management. - Remove the default debounce time for the AMD driver" * tag 'pinctrl-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: intel: merrifield: Add missed header pinctrl/amd: Remove the default de-bounce time pinctrl: pistachio: Drop pinctrl_unregister for devm_ registered device pinctrl: meson: Drop pinctrl_unregister for devm_ registered device
-
