- 03 Oct, 2015 8 commits
-
-
Eric Dumazet authored
When request sockets are no longer in a per listener hash table but on regular TCP ehash, we need to access listener uid through req->rsk_listener get_openreq6() also gets a const for its request socket argument. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Once listener is lockless, its sk_state can change anytime. Signed-off-by:
-
Eric Dumazet authored
We'll soon have to call tcp_v[46]_inbound_md5_hash() twice. Also add const attribute to the socket, as it might be the unlocked listener for SYN packets. Signed-off-by:
-
Eric Dumazet authored
We plan to use generic functions to insert request sockets into ehash table. sk_prot needs to be set (to retrieve sk_prot->h.hashinfo) sk_node needs to be cleared. Signed-off-by:
-
Eric Dumazet authored
This fixes a typo : We want to store the NAPI id on child socket. Presumably nobody really uses busy polling, on short lived flows. Fixes: 3d97379a ("tcp: move sk_mark_napi_id() at the right place") Signed-off-by:
-
Eric Dumazet authored
long term plan is to remove struct listen_sock when its hash table is no longer there. Signed-off-by:
-
Eric Dumazet authored
qlen_inc & young_inc were protected by listener lock, while qlen_dec & young_dec were atomic fields. Everything needs to be atomic for upcoming lockless listener. Also move qlen/young in request_sock_queue as we'll get rid of struct listen_sock eventually. Signed-off-by:
-
Eric Dumazet authored
struct request_sock_queue fields are currently protected by the listener 'lock' (not a real spinlock) We need to add a private spinlock instead, so that softirq handlers creating children do not have to worry with backlog notion that the listener 'lock' carries. Signed-off-by:
-
- 02 Oct, 2015 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: -
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.3 rc4: MMC core: - Allow users of mmc_of_parse() to succeed when CONFIG_GPIOLIB is unset - Prevent infinite loop of re-tuning for CRC-errors for CMD19 and CMD21 MMC host: - pxamci: Fix issues with card detect - sunxi: Fix clk-delay settings" * tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: core: fix dead loop of mmc_retune mmc: pxamci: fix card detect with slot-gpio API mmc: sunxi: Fix clk-delay settings mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset -
git://git.infradead.org/intel-iommuLinus Torvalds authored
Pull IOVA fixes from David Woodhouse: "The main fix here is the first one, fixing the over-allocation of size-aligned requests. The other patches simply make the existing IOVA code available to users other than the Intel VT-d driver, with no functional change. I concede the latter really *should* have been submitted during the merge window, but since it's basically risk-free and people are waiting to build on top of it and it's my fault I didn't get it in, I (and they) would be grateful if you'd take it" * git://git.infradead.org/intel-iommu: iommu: Make the iova library a module iommu: iova: Export symbols iommu: iova: Move iova cache management to the iova library iommu/iova: Avoid over-allocating when size-aligned
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dmapool: fix overflow condition in pool_find_page() thermal: avoid division by zero in power allocator memcg: remove pcp_counter_lock kprobes: use _do_fork() in samples to make them work again drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE memcg: make mem_cgroup_read_stat() unsigned memcg: fix dirty page migration dax: fix NULL pointer in __dax_pmd_fault() mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1) userfaultfd: remove kernel header include from uapi header arch/x86/include/asm/efi.h: fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes mostly, for a few changes made in this cycle (the intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and for some issues that have just been discovered (ACPI PCI IRQ management, PCI power management documentation, turbostat), with a couple of cleanups on top of them. Specifics: - intel_idle driver fixup for the recently added Skylake chips support (Len Brown). - Operating Performance Points (OPP) library fix related to the recently added support for new DT bindings and a fix for a typo in a comment (Viresh Kumar, Stephen Boyd). - ACPI EC driver fix for a recently introduced memory leak in an error code path (Lv Zheng). - ACPI PCI IRQ management fix for the issue where an ISA IRQ is shared with a PCI device which requires it to be configured in a different way and may cause an interrupt storm to happen as a result with an extra ACPI SCI IRQ handling simplification on top of it (Jiang Liu). - Update of the PCI power management documentation that became outdated and started to actively confuse the readers to make it actually reflect the code (Rafael J Wysocki). - turbostat fixes including an IVB Xeon regression fix (related to the --debug command line option), Skylake adjustment for the TSC running at a frequency that doesn't match the base one exactly, and a Knights Landing quirk to account for the fact that it only updates APERF and MPERF every 1024 clock cycles plus bumping up the turbostat version number (Len Brown, Hubert Chrzaniuk)" * tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power turbosat: update version number tools/power turbostat: SKL: Adjust for TSC difference from base frequency tools/power turbostat: KNL workaround for %Busy and Avg_MHz tools/power turbostat: IVB Xeon: fix --debug regression ACPI / PCI: Remove duplicated penalty on SCI IRQ ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ ACPI / EC: Fix a memory leak issue in acpi_ec_query() PM / OPP: Fix typo modifcation -> modification PCI / PM: Update runtime PM documentation for PCI devices PM / OPP: of_property_count_u32_elems() can return errors intel_idle: Skylake Client Support - updated -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix regression in SKB partial checksum handling, from Pravin B Shalar. 2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse Brandeburg. 3) Cure softlockups during accept() in SCTP, from Karl Heiss. 4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from Aaron Conole. 5) IPV6 erroneously ignores output interface specifier in lookup key for route lookups, fix from David Ahern. 6) In Marvell DSA driver, forward unknown frames to CPU port, from Andrew Lunn. 7) Mission flow flag initializations in some code paths, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Initialize flow flags in input path net: dsa: fix preparation of a port STP update testptp: Silence compiler warnings on ppc64 net/mlx4: Handle return codes in mlx4_qp_attach_common dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port skbuff: Fix skb checksum partial check. net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set net sysfs: Print link speed as signed integer bna: fix error handling af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag af_unix: Convert the unix_sk macro to an inline function for type safety net: sctp: Don't use 64 kilobyte lookup table for four elements l2tp: protect tunnel->del_work by ref_count net/ibm/emac: bump version numbers for correct work with ethtool sctp: Prevent soft lockup when sctp_accept() is called during a timeout event sctp: Whitespace fix i40e/i40evf: check for stopped admin queue i40e: fix VLAN inside VXLAN r8169: fix handling rtl_readphy result net: hisilicon: fix handling platform_get_irq result
-
Robin Murphy authored
If a DMA pool lies at the very top of the dma_addr_t range (as may happen with an IOMMU involved), the calculated end address of the pool wraps around to zero, and page lookup always fails. Tweak the relevant calculation to be overflow-proof. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrea Arcangeli authored
During boot I get a div by zero Oops regression starting in v4.3-rc3. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Javi Merino <javi.merino@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
-
Greg Thelen authored
Commit 733a572e ("memcg: make mem_cgroup_read_{stat|event}() iterate possible cpus instead of online") removed the last use of the per memcg pcp_counter_lock but forgot to remove the variable. Kill the vestigial variable. Signed-off-by:
Greg Thelen <gthelen@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Petr Mladek authored
Commit 3033f14a ("clone: support passing tls argument via C rather than pt_regs magic") introduced _do_fork() that allowed to pass @tls parameter. The old do_fork() is defined only for architectures that are not ready to use this way and do not define HAVE_COPY_THREAD_TLS. Let's use _do_fork() in the kprobe examples to make them work again on all architectures. Signed-off-by:
Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thiago Macieira <thiago.macieira@intel.com> Cc: Jiri Kosina <jkosina@suse.com> Signed-off-by:
-
Andrew Morton authored
It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Cc: Fengguang Wu <fengguang.wu@gmail.com> Cc: yalin wang <yalin.wang2010@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Greg Thelen authored
mem_cgroup_read_stat() returns a page count by summing per cpu page counters. The summing is racy wrt. updates, so a transient negative sum is possible. Callers don't want negative values: - mem_cgroup_wb_stats() doesn't want negative nr_dirty or nr_writeback. This could confuse dirty throttling. - oom reports and memory.stat shouldn't show confusing negative usage. - tree_usage() already avoids negatives. Avoid returning negative page counts from mem_cgroup_read_stat() and convert it to unsigned. [akpm@linux-foundation.org: fix old typo while we're in there] Signed-off-by:
-
Greg Thelen authored
The problem starts with a file backed dirty page which is charged to a memcg. Then page migration is used to move oldpage to newpage. Migration: - copies the oldpage's data to newpage - clears oldpage.PG_dirty - sets newpage.PG_dirty - uncharges oldpage from memcg - charges newpage to memcg Clearing oldpage.PG_dirty decrements the charged memcg's dirty page count. However, because newpage is not yet charged, setting newpage.PG_dirty does not increment the memcg's dirty page count. After migration completes newpage.PG_dirty is eventually cleared, often in account_page_cleaned(). At this time newpage is charged to a memcg so the memcg's dirty page count is decremented which causes underflow because the count was not previously incremented by migration. This underflow causes balance_dirty_pages() to see a very large unsigned number of dirty memcg pages which leads to aggressive throttling of buffered writes by processes in non root memcg. This issue: - can harm performance of non root memcg buffered writes. - can report too small (even negative) values in memory.stat[(total_)dirty] counters of all memcg, including the root. To avoid polluting migrate.c with #ifdef CONFIG_MEMCG checks, introduce page_memcg() and set_page_memcg() helpers. Test: 0) setup and enter limited memcg mkdir /sys/fs/cgroup/test echo 1G > /sys/fs/cgroup/test/memory.limit_in_bytes echo $$ > /sys/fs/cgroup/test/cgroup.procs 1) buffered writes baseline dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k sync grep ^dirty /sys/fs/cgroup/test/memory.stat 2) buffered writes with compaction antagonist to induce migration yes 1 > /proc/sys/vm/compact_memory & rm -rf /data/tmp/foo dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k kill % sync grep ^dirty /sys/fs/cgroup/test/memory.stat 3) buffered writes without antagonist, should match baseline rm -rf /data/tmp/foo dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k sync grep ^dirty /sys/fs/cgroup/test/memory.stat (speed, dirty residue) unpatched patched 1) 841 MB/s 0 dirty pages 886 MB/s 0 dirty pages 2) 611 MB/s -33427456 dirty pages 793 MB/s 0 dirty pages 3) 114 MB/s -33427456 dirty pages 891 MB/s 0 dirty pages Notice that unpatched baseline performance (1) fell after migration (3): 841 -> 114 MB/s. In the patched kernel, post migration performance matches baseline. Fixes: c4843a75 ("memcg: add per cgroup dirty page accounting") Signed-off-by:Dave Hansen <dave.hansen@intel.com> Acked-by:
-
Ross Zwisler authored
Commit 46c043ed ("mm: take i_mmap_lock in unmap_mapping_range() for DAX") moved some code in __dax_pmd_fault() that was responsible for zeroing newly allocated PMD pages. The new location didn't properly set up 'kaddr', so when run this code resulted in a NULL pointer BUG. Fix this by getting the correct 'kaddr' via bdev_direct_access(). Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
Mel Gorman authored
SunDong reported the following on https://bugzilla.kernel.org/show_bug.cgi?id=103841 I think I find a linux bug, I have the test cases is constructed. I can stable recurring problems in fedora22(4.0.4) kernel version, arch for x86_64. I construct transparent huge page, when the parent and child process with MAP_SHARE, MAP_PRIVATE way to access the same huge page area, it has the opportunity to lead to huge page copy on write failure, and then it will munmap the child corresponding mmap area, but then the child mmap area with VM_MAYSHARE attributes, child process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags functions (vma - > vm_flags & VM_MAYSHARE). There were a number of problems with the report (e.g. it's hugetlbfs that triggers this, not transparent huge pages) but it was fundamentally correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that looks like this vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800 prot 8000000000000027 anon_vma (null) vm_ops ffffffff8182a7a0 pgoff 0 file ffff88106bdb9800 private_data (null) flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb) ------------ kernel BUG at mm/hugetlb.c:462! SMP Modules linked in: xt_pkttype xt_LOG xt_limit [..] CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012 set_vma_resv_flags+0x2d/0x30 The VM_BUG_ON is correct because private and shared mappings have different reservation accounting but the warning clearly shows that the VMA is shared. When a private COW fails to allocate a new page then only the process that created the VMA gets the page -- all the children unmap the page. If the children access that data in the future then they get killed. The problem is that the same file is mapped shared and private. During the COW, the allocation fails, the VMAs are traversed to unmap the other private pages but a shared VMA is found and the bug is triggered. This patch identifies such VMAs and skips them. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Reported-by:
SunDong <sund_sky@126.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joonsoo Kim authored
Commit description is copied from the original post of this bug: http://comments.gmane.org/gmane.linux.kernel.mm/135349 Kernels after v3.9 use kmalloc_size(INDEX_NODE + 1) to get the next larger cache size than the size index INDEX_NODE mapping. In kernels 3.9 and earlier we used malloc_sizes[INDEX_L3 + 1].cs_size. However, sometimes we can't get the right output we expected via kmalloc_size(INDEX_NODE + 1), causing a BUG(). The mapping table in the latest kernel is like: index = {0, 1, 2 , 3, 4, 5, 6, n} size = {0, 96, 192, 8, 16, 32, 64, 2^n} The mapping table before 3.10 is like this: index = {0 , 1 , 2, 3, 4 , 5 , 6, n} size = {32, 64, 96, 128, 192, 256, 512, 2^(n+3)} The problem on my mips64 machine is as follows: (1) When configured DEBUG_SLAB && DEBUG_PAGEALLOC && DEBUG_LOCK_ALLOC && DEBUG_SPINLOCK, the sizeof(struct kmem_cache_node) will be "150", and the macro INDEX_NODE turns out to be "2": #define INDEX_NODE kmalloc_index(sizeof(struct kmem_cache_node)) (2) Then the result of kmalloc_size(INDEX_NODE + 1) is 8. (3) Then "if(size >= kmalloc_size(INDEX_NODE + 1)" will lead to "size = PAGE_SIZE". (4) Then "if ((size >= (PAGE_SIZE >> 3))" test will be satisfied and "flags |= CFLGS_OFF_SLAB" will be covered. (5) if (flags & CFLGS_OFF_SLAB)" test will be satisfied and will go to "cachep->slabp_cache = kmalloc_slab(slab_size, 0u)", and the result here may be NULL while kernel bootup. (6) Finally,"BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));" causes the BUG info as the following shows (may be only mips64 has this problem): This patch fixes the problem of kmalloc_size(INDEX_NODE + 1) and removes the BUG by adding 'size >= 256' check to guarantee that all necessary small sized slabs are initialized regardless sequence of slab size in mapping table. Fixes: e3366016 ("slab: Use common kmalloc_index/kmalloc_size...") Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-by:
Liuhailong <liu.hailong6@zte.com.cn> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Andre Przywara authored
As include/uapi/linux/userfaultfd.h is a user visible header file, it should not include kernel-exclusive header files. So trying to build the userfaultfd test program from the selftests directory fails, since it contains a reference to linux/compiler.h. As it turns out, that header is not really needed there, so we can simply remove it to fix that issue. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Andrey Ryabinin authored
With KMEMCHECK=y, KASAN=n: arch/x86/platform/efi/efi.c:673:3: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration] arch/x86/platform/efi/efi_64.c:139:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration] arch/x86/include/asm/desc.h:121:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration] Don't #undef memcpy if KASAN=n. Fixes: 769a8089 ("x86, efi, kasan: #undef memset/memcpy/memmove per arch") Signed-off-by:
Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by:
Ingo Molnar <mingo@kernel.org> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: vlan: cleanups & fixes This is the first follow-up set, patch 01 reduces the default rhashtable size and the number of locks that can be allocated. Patch 02 and 04 fix possible null pointer dereferences due to the new ordering and initialization on port add/del, and patch 03 moves the "pvid" member in the net_bridge_vlan_group struct in order to simplify code (similar to how it was with the older struct). Patch 05 fixes adding a vlan on a port which is pvid and doesn't have a global context yet. Please review carefully, I think this is the first use of rhashtable's "locks_mul" member in the tree and I'd like to make sure it's correct. Another thing that needs special attention is the nbp_vlan_flush() move after the rx_handler unregister. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
We should not pass the original flags when creating a context vlan only because they may contain some flags that change behaviour in the bridge. The new global context should be with minimal set of flags, so pass 0 and let br_vlan_add() set the master flag only. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
When a new port is being added we need to make vlgrp available after rhashtable has been initialized and when removing a port we need to flush the vlans and free the resources after we're sure noone can use the port, i.e. after it's removed from the port list and synchronize_rcu is executed. Signed-off-by:
-
Nikolay Aleksandrov authored
One obvious way to converge more code (which was also used by the previous vlan code) is to move pvid inside net_bridge_vlan_group. This allows us to simplify some and remove other port-specific functions. Also gives us the ability to simply pass the vlan group and use all of the contained information. Signed-off-by:
-
Nikolay Aleksandrov authored
While a new port is being initialized the rx_handler gets set, but the vlans get initialized later in br_add_if() and in that window if we receive a frame with a link-local address we can try to dereference p->vlgrp in: br_handle_frame() -> br_handle_local_finish() -> br_should_learn() Fix this by checking vlgrp before using it. Signed-off-by:
-
Nikolay Aleksandrov authored
As Stephen pointed out the default initial size is more than we need, so let's start small (4 elements, thus nelem_hint = 3). Also limit the hash locks to the number of CPUs as we don't need any write-side scaling and this looks like the minimum. Signed-off-by:
-
- 01 Oct, 2015 8 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "(Relatively) a lot of reverts, mostly. Bugs have trickled in for a new feature in 4.2 (MTRR support in guests) so I'm reverting it all; let's not make this -rc period busier for KVM than it's been so far. This covers the four reverts from me. The fifth patch is being reverted because Radim found a bug in the implementation of stable scheduler clock, *but* also managed to implement the feature entirely without hypervisor support. So instead of fixing the hypervisor side we can remove it completely; 4.4 will get the new implementation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: Use WARN_ON_ONCE for missing X86_FEATURE_NRIPS Update KVM homepage Url Revert "KVM: SVM: use NPT page attributes" Revert "KVM: svm: handle KVM_X86_QUIRK_CD_NW_CLEARED in svm_get_mt_mask" Revert "KVM: SVM: Sync g_pat with guest-written PAT value" Revert "KVM: x86: apply guest MTRR virtualization on host reserved pages" Revert "KVM: x86: zero kvmclock_offset when vcpu0 initializes kvmclock system MSR"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: - Fixes for mlx5 related issues - Fixes for ipoib multicast handling * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/ipoib: increase the max mcast backlog queue IB/ipoib: Make sendonly multicast joins create the mcast group IB/ipoib: Expire sendonly multicast joins IB/mlx5: Remove pa_lkey usages IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEY IB/iser: Add module parameter for always register memory xprtrdma: Replace global lkey with lkey local to PD
-
Rafael J. Wysocki authored
* pm-cpuidle: intel_idle: Skylake Client Support - updated * pm-opp: PM / OPP: Fix typo modifcation -> modification PM / OPP: of_property_count_u32_elems() can return errors * pm-tools: tools/power turbosat: update version number tools/power turbostat: SKL: Adjust for TSC difference from base frequency tools/power turbostat: KNL workaround for %Busy and Avg_MHz tools/power turbostat: IVB Xeon: fix --debug regression
-
Rafael J. Wysocki authored
* acpi-ec: ACPI / EC: Fix a memory leak issue in acpi_ec_query()
-
Rafael J. Wysocki authored
* pm-pci: PCI / PM: Update runtime PM documentation for PCI devices * acpi-pci: ACPI / PCI: Remove duplicated penalty on SCI IRQ ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
-
Dirk Müller authored
The cpu feature flags are not ever going to change, so warning everytime can cause a lot of kernel log spam (in our case more than 10GB/hour). The warning seems to only occur when nested virtualization is enabled, so it's probably triggered by a KVM bug. This is a sensible and safe change anyway, and the KVM bug fix might not be suitable for stable releases anyway. Cc: stable@vger.kernel.org Signed-off-by:
Dirk Mueller <dmueller@suse.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Dirk Müller authored
The old one appears to be a generic catch all page, which is unhelpful. Signed-off-by:
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS fixes from Richard Weinberger: "This contains three bug fixes for both UBI and UBIFS" * tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs: UBI: return ENOSPC if no enough space available UBI: Validate data_size UBIFS: Kill unneeded locking in ubifs_init_security
-
