- 04 Jan, 2020 35 commits
-
-
Ingo Rohloff authored
[ Upstream commit abb0b3d9 ] commit 1455cf8d ("driver core: emit uevents when device is bound to a driver") added bind and unbind uevents when a driver is bound or unbound to a physical device. For USB devices which are handled via the generic usbfs layer (via libusb for example), this is problematic: Each time a user space program calls ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr); and then later ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr); The kernel will now produce a bind or unbind event, which does not really contain any useful information. This allows a user space program to run a DoS attack against programs which listen to uevents (in particular systemd/eudev/upowerd): A malicious user space program just has to call in a tight loop ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr); ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr); With this loop the malicious user space program floods the kernel and all programs listening to uevents with tons of bind and unbind events. This patch suppresses uevents for ioctls USBDEVFS_CLAIMINTERFACE and USBDEVFS_RELEASEINTERFACE. Signed-off-by:
Ingo Rohloff <ingo.rohloff@lauterbach.com> Link: https://lore.kernel.org/r/20191011115518.2801-1-ingo.rohloff@lauterbach.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jin Yao authored
[ Upstream commit 800d3f56 ] We received a user report that call-graph DWARF mode was enabled in 'perf record' but 'perf report' didn't unwind the callstack correctly. The reason was, libunwind was not compiled in. We can use 'perf -vv' to check the compiled libraries but it would be valuable to report a warning to user directly (especially valuable for a perf newbie). The warning is: Warning: Please install libunwind development packages during the perf build. Both TUI and stdio are supported. Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Leo Yan authored
[ Upstream commit 6add129c ] When fail to mmap events in task exit case, it misses to set 'err' to -1; thus the testing will not report failure for it. This patch sets 'err' to -1 when fails to mmap events, thus Perf tool can report correct result. Fixes: d723a550 ("perf test: Add test case for checking number of EXIT events") Signed-off-by:
Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.orgSigned-off-by:
-
Sami Tolvanen authored
[ Upstream commit f53e2cd0 ] We call native_set_fixmap indirectly through the function pointer struct pv_mmu_ops::set_fixmap, which expects the first parameter to be 'unsigned' instead of 'enum fixed_addresses'. This patch changes the function type for native_set_fixmap to match the pointer, which fixes indirect call mismatches with Control-Flow Integrity (CFI) checking. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H . Peter Anvin <hpa@zytor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190913211402.193018-1-samitolvanen@google.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit 69426350 ] On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader seems to keep interrupts enabled for SM5502 when booting Linux. Changing the cable state (i.e. plugging in a cable) - until the driver is loaded - will therefore produce an interrupt that is never read. In this situation, the cable state will be stuck forever on the initial state because SM5502 stops sending interrupts. This can be avoided by clearing those pending interrupts after the driver has been loaded. One way to do this is to reset all registers to default state by writing to SM5502_REG_RESET. This ensures that we start from a clean state, with all interrupts disabled. Suggested-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Benoit Parrot authored
[ Upstream commit e20b2480 ] v4l2-compliance fails with this message: fail: v4l2-test-formats.cpp(672): \ Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT fail: v4l2-test-formats.cpp(672): \ Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT ... test VIDIOC_TRY_FMT: FAIL The default pixel format was setup as pointing to a specific offset in the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV entry. This became false after the addition on the NV21 format (see above commid-id) So instead of hard-coding an offset which might change over time we need to use a lookup helper instead so we know the default will always be what we intended. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Fixes: 40cc823f7005 ("media: ti-vpe: Add support for NV21 format") Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Benoit Parrot authored
[ Upstream commit 2444846c ] v4l2-compliance fails with this message: fail: v4l2-test-buffers.cpp(294): \ (int)g_sequence() < seq.last_seq + 1 fail: v4l2-test-buffers.cpp(740): \ buf.check(m2m_q, last_m2m_seq) fail: v4l2-test-buffers.cpp(974): \ captureBufs(node, q, m2m_q, frame_count, true) test MMAP: FAIL The driver is failing to update the source frame sequence number in the vb2 buffer object. Only the destination frame sequence was being updated. This is only a reporting issue if the user space app actually cares about the frame sequence number. But it is fixed nonetheless. Signed-off-by:
-
Benoit Parrot authored
[ Upstream commit 06bec72b ] v4l2-compliance warns with this message: warn: v4l2-test-formats.cpp(717): \ TRY_FMT cannot handle an invalid pixelformat. warn: v4l2-test-formats.cpp(718): \ This may or may not be a problem. For more information see: warn: v4l2-test-formats.cpp(719): \ http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html ... test VIDIOC_TRY_FMT: FAIL We need to make sure that the returns a valid pixel format in all instance. Based on the v4l2 framework convention drivers must return a valid pixel format when the requested pixel format is either invalid or not supported. Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit d10dcb61 ] In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release for skb and card->evtbd_ring_vbase is added. Fixes: 0732484b ("mwifiex: separate ring initialization and ring creation routines") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Daniel T. Lee authored
[ Upstream commit 3cad8f91 ] Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread', 'pg_set'. proc_cmd is designed to check command result with grep the "Result:", but this might fail since this string is only shown in 'pg_thread' and 'pg_set'. This commit fixes this logic by grep-ing the "Result:" string only when the command is not for 'pg_ctrl'. For clarity of an execution flow, 'errexit' flag has been set. To cleanup pktgen on exit, trap has been added for EXIT signal. Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 9b211f9c ] The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the follower will reply with a STATUS message. Either once or whenever the status changes (status_req == ON). If status_req == OFF, then it will stop sending continuous status updates, but the follower will *not* send a STATUS message in that case. This means that if status_req == OFF, then msg->reply should be 0 as well since no reply is expected in that case. Signed-off-by:
-
Yang Yingliang authored
[ Upstream commit 649cd16c ] If usb_set_interface() failed, iface->cur_altsetting will not be assigned and it will be used in flexcop_usb_transfer_init() It may lead a NULL pointer dereference. Check usb_set_interface() return value in flexcop_usb_init() and return failed to avoid using this NULL pointer. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Yizhuo authored
[ Upstream commit 472b39c3 ] Inside function max8907_regulator_probe(), variable val could be uninitialized if regmap_read() fails. However, val is used later in the if statement to decide the content written to "pmic", which is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.eduSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit eaecce12 ] When unloading omap3-rom-rng, we'll get the following: WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable This is because the clock may be already disabled by omap3_rom_rng_idle(). Let's fix the issue by checking for rng_idle on exit. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Fixes: 1c6b7c21 ("hwrng: OMAP3 ROM Random Number Generator support") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Veeraiyan Chidambaram authored
[ Upstream commit 39abcc84 ] When R-Car Gen3 USB 2.0 is in Gadget mode, if host is detached an interrupt will be generated and Suspended state bit is set in interrupt status register. Interrupt handler will call driver->suspend(composite_suspend) if suspended state bit is set. composite_suspend will call ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed by user space application via /dev/ep0. To be able to detect host detach, extend the DVSQ_MASK to cover the Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status Register 0 (INTSTS0) register and perform appropriate action in the DVST interrupt handler (usbhsg_irq_dev_state). Without this commit, disconnection of the phone from R-Car-H3 ES2.0 Salvator-X CN9 port is not recognized and reverse role switch does not happen. If phone is connected again it does not enumerate. With this commit, disconnection will be recognized and reverse role switch will happen by a user space application. If phone is connected again it will enumerate properly and will become visible in the output of 'lsusb'. Signed-off-by:
Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com> Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
-
Nathan Chancellor authored
[ Upstream commit 7e5705c6 ] When building cpupower with clang, the following warning appears: utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] .desc = N_("Processor Package C2"), ^~~~~~~~~~~~~~~~~~~~~~ ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_' #define N_(String) gettext_noop(String) ^~~~~~ ./utils/helpers/helpers.h:23:30: note: expanded from macro 'gettext_noop' #define gettext_noop(String) String ^~~~~~ utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization is here .desc = N_("Processor Package C9"), ^~~~~~~~~~~~~~~~~~~~~~ ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_' #define N_(String) gettext_noop(String) ^~~~~~ ./utils/helpers/helpers.h:23:30: note: expanded from macro 'gettext_noop' #define gettext_noop(String) String ^~~~~~ 1 warning generated. This appears to be a copy and paste or merge mistake because the name and id fields both have PC9 in them, not PC2. Remove the second assignment to fix the warning. Fixes: 7ee767b6 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states") Link: https://github.com/ClangBuiltLinux/linux/issues/718Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Janusz Krzysztofik authored
[ Upstream commit 3143b459 ] The driver stores frame format settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, those settings are updated before they are actually applied on hardware. If an error occurs on device update, the stored settings my not reflect hardware state anymore and consecutive calls to .get_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informmation on active frame format returned by .get_fmt() is used. Assuming a failed device update means its state hasn't changed, update frame format related settings stored in the device private structure only after they are successfully applied so the stored values always reflect hardware state as closely as possible. Fixes: 2f6e2404 ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Benoit Parrot authored
[ Upstream commit 9d669fbf ] The initial registers sequence is only loaded at probe time. Afterward only the resolution and format specific register are modified. Care must be taken to make sure registers modified by one resolution setting are reverted back when another resolution is programmed. This was not done properly for the 720p case. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Benoit Parrot authored
[ Upstream commit 85c4043f ] In ov2659_s_stream() return value for invoked function should be checked and propagated. Signed-off-by:
-
Benoit Parrot authored
[ Upstream commit 13aa21cf ] VIDIOC_S_STD should not return an error if the value is identical to the current one. This error was highlighted by the v4l2-compliance test. Signed-off-by:
-
Max Gurtovoy authored
[ Upstream commit 7718cf03 ] In case we don't set the sg_prot_tablesize, the scsi layer assign the default size (65535 entries). We should limit this size since we should take into consideration the underlaying device capability. This cap is considered when calculating the sg_tablesize. Otherwise, for example, we can get that /sys/block/sdb/queue/max_segments is 128 and /sys/block/sdb/queue/max_integrity_segments is 65535. Link: https://lore.kernel.org/r/1569359027-10987-1-git-send-email-maxg@mellanox.comSigned-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Allen Pais authored
[ Upstream commit 7da413a1 ] alloc_workqueue is not checked for errors and as a result, a potential NULL dereference could occur. Signed-off-by:
Allen Pais <allen.pais@oracle.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 3f936169 ] In rtl_usb_probe if allocation for usb_data fails the allocated hw should be released. In addition the allocated rtlpriv->usb_data should be released on error handling path. Signed-off-by:
-
Connor Kuehl authored
[ Upstream commit 22824194 ] Inside a nested 'else' block at the beginning of this function is a call that assigns 'psta' to the return value of 'rtw_get_stainfo()'. If 'rtw_get_stainfo()' returns NULL and the flow of control reaches the 'else if' where 'psta' is dereferenced, then we will dereference a NULL pointer. Fix this by checking if 'psta' is not NULL before reading its 'psta->qos_option' data member. Addresses-Coverity: ("Dereference null return value") Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20190926150317.5894-1-connor.kuehl@canonical.comSigned-off-by:
-
Navid Emamdoost authored
[ Upstream commit ca312438 ] In rtl8192_tx on error handling path allocated urbs and also skb should be released. Signed-off-by:
-
Lukasz Majewski authored
[ Upstream commit 9f918a72 ] This change is necessary for spidev devices (e.g. /dev/spidev3.0) working in the slave mode (like NXP's dspi driver for Vybrid SoC). When SPI HW works in this mode - the master is responsible for providing CS and CLK signals. However, when some fault happens - like for example distortion on SPI lines - the SPI Linux driver needs a chance to recover from this abnormal situation and prepare itself for next (correct) transmission. This change doesn't pose any threat on drivers working in master mode as spi_slave_abort() function checks if SPI slave mode is supported. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.deSigned-off-by:
kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.deSigned-off-by:
-
Krzysztof Wilczynski authored
[ Upstream commit f552fde9 ] Separate the declaration of struct bh1750_chip_info from definition of bh1750_chip_info_tbl[] in a single statement as it makes the code hard to read, and with the extra newline it makes it look as if the bh1750_chip_info_tbl[] had no explicit type. This change also resolves the following compiler warning about the unusual position of the static keyword that can be seen when building with warnings enabled (W=1): drivers/iio/light/bh1750.c:64:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Related to commit 3a11fbb0 ("iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors"). Signed-off-by:
Krzysztof Wilczynski <kw@linux.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Brian Masney authored
[ Upstream commit 2708e876 ] Silence two warning messages that occur due to -EPROBE_DEFER errors to help cleanup the system boot log. Signed-off-by:
Brian Masney <masneyb@onstation.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.orgSigned-off-by:
-
Sean Paul authored
[ Upstream commit 268de653 ] Spec says[1] Allocated_PBN is 16 bits [1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98 Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Lyude Paul <lyude@redhat.com> Cc: Todd Previte <tprevite@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.runSigned-off-by:
-
Takashi Iwai authored
commit cb04fc3b upstream. Introduce a timeout to dspio_clear_response_queue() so that it won't be caught in an endless loop even if the hardware doesn't respond properly. Fixes: a73d511c ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 377bc0cf upstream. We need to keep power on while processing the DSP response via unsol event. Each snd_hda_codec_read() call does the power management, so it should work normally, but still it's safer to keep the power up for the whole function. Fixes: a73d511c ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit add9d56d upstream. The current PCM code doesn't initialize explicitly the buffers allocated for PCM streams, hence it might leak some uninitialized kernel data or previous stream contents by mmapping or reading the buffer before actually starting the stream. Since this is a common problem, this patch simply adds the clearance of the buffer data at hw_params callback. Although this does only zero-clear no matter which format is used, which doesn't mean the silence for some formats, but it should be OK because the intention is just to clear the previous data on the buffer. Reported-by:
Lionel Koenig <lionel.koenig@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.deSigned-off-by:
-
Josef Bacik authored
commit 714cd3e8 upstream. If we get an -ENOENT back from btrfs_uuid_iter_rem when iterating the uuid tree we'll just continue and do btrfs_next_item(). However we've done a btrfs_release_path() at this point and no longer have a valid path. So increment the key and go back and do a normal search. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
commit ca1aa281 upstream. If we fail to read the fs root corresponding with a reloc root we'll just break out and free the reloc roots. But we remove our current reloc_root from this list higher up, which means we'll leak this reloc_root. Fix this by adding ourselves back to the reloc_roots list so we are properly cleaned up. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Josef Bacik authored
commit 9bc574de upstream. My fsstress modifications coupled with generic/475 uncovered a failure to mount and replay the log if we hit a orphaned root. We do not want to replay the log for an orphan root, but it's completely legitimate to have an orphaned root with a log attached. Fix this by simply skipping replaying the log. We still need to pin it's root node so that we do not overwrite it while replaying other logs, as we re-read the log root at every stage of the replay. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
- 21 Dec, 2019 5 commits
-
-
Greg Kroah-Hartman authored
-
Aaro Koskinen authored
commit 07b39753 upstream. Currently, if we drop a packet, we exit from NAPI loop before the budget is consumed. In some situations this will make the RX processing stall e.g. when flood pinging the system with oversized packets, as the errorneous packets are not dropped efficiently. If we drop a packet, we should just continue to the next one as long as the budget allows. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by:
Aviraj CJ <acj@cisco.com> Signed-off-by:
-
Aaro Koskinen authored
commit 583e6361 upstream. We always program the maximum DMA buffer size into the receive descriptor, although the allocated size may be less. E.g. with the default MTU size we allocate only 1536 bytes. If somebody sends us a bigger frame, then memory may get corrupted. Fix by using exact buffer sizes. Signed-off-by:
-
Mathias Nyman authored
commit 057d476f upstream. A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by:
Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.comSigned-off-by:
-
Alex Deucher authored
commit 008037d4 upstream. Shift and mask were reversed. Noticed by chance. Tested-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
