- 22 Mar, 2012 23 commits
-
-
Dan Carpenter authored
"order" is -1 when compacting via /proc/sys/vm/compact_memory. Making it unsigned causes a bug in __compact_pgdat() when we test: if (cc->order < 0 || !compaction_deferred(zone, cc->order)) compact_zone(zone, cc); [akpm@linux-foundation.org: make __compact_pgdat()'s comparison match other code sites] Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan@kernel.org> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
I get this lockdep warning from swapping load on linux-next, due to "vmscan: kswapd carefully call compaction". ================================= [ INFO: inconsistent lock state ] 3.3.0-rc2-next-20120201 #5 Not tainted --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/28 [HC0[0]:SC0[0]:HE1:SE1] takes: (pcpu_alloc_mutex){+.+.?.}, at: [<ffffffff810d6684>] pcpu_alloc+0x67/0x325 {RECLAIM_FS-ON-W} state was registered at: [<ffffffff81099b75>] mark_held_locks+0xd7/0x103 [<ffffffff8109a13c>] lockdep_trace_alloc+0x85/0x9e [<ffffffff810f6bdc>] __kmalloc+0x6c/0x14b [<ffffffff810d57fd>] pcpu_mem_zalloc+0x59/0x62 [<ffffffff810d5d16>] pcpu_extend_area_map+0x26/0xb1 [<ffffffff810d679f>] pcpu_alloc+0x182/0x325 [<ffffffff810d694d>] __alloc_percpu+0xb/0xd [<ffffffff8142ebfd>] snmp_mib_init+0x1e/0x2e [<ffffffff8185cd8d>] ipv4_mib_init_net+0x7a/0x184 [<ffffffff813dc963>] ops_init.clone.0+0x6b/0x73 [<ffffffff813dc9cc>] register_pernet_operations+0x61/0xa0 [<ffffffff813dca8e>] register_pernet_subsys+0x29/0x42 [<ffffffff8185d044>] inet_init+0x1ad/0x252 [<ffffffff810002e3>] do_one_initcall+0x7a/0x12f [<ffffffff81832bc5>] kernel_init+0x9d/0x11e [<ffffffff814e51e4>] kernel_thread_helper+0x4/0x10 irq event stamp: 656613 hardirqs last enabled at (656613): [<ffffffff814e0ddc>] __mutex_unlock_slowpath+0x104/0x128 hardirqs last disabled at (656612): [<ffffffff814e0d34>] __mutex_unlock_slowpath+0x5c/0x128 softirqs last enabled at (655568): [<ffffffff8105b4a5>] __do_softirq+0x120/0x136 softirqs last disabled at (654757): [<ffffffff814e52dc>] call_softirq+0x1c/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pcpu_alloc_mutex); <Interrupt> lock(pcpu_alloc_mutex); *** DEADLOCK *** no locks held by kswapd0/28. stack backtrace: Pid: 28, comm: kswapd0 Not tainted 3.3.0-rc2-next-20120201 #5 Call Trace: [<ffffffff810981f4>] print_usage_bug+0x1bf/0x1d0 [<ffffffff81096c3e>] ? print_irq_inversion_bug+0x1d9/0x1d9 [<ffffffff810982c0>] mark_lock_irq+0xbb/0x22e [<ffffffff810c5399>] ? free_hot_cold_page+0x13d/0x14f [<ffffffff81098684>] mark_lock+0x251/0x331 [<ffffffff81098893>] mark_irqflags+0x12f/0x141 [<ffffffff81098e32>] __lock_acquire+0x58d/0x753 [<ffffffff810d6684>] ? pcpu_alloc+0x67/0x325 [<ffffffff81099433>] lock_acquire+0x54/0x6a [<ffffffff810d6684>] ? pcpu_alloc+0x67/0x325 [<ffffffff8107a5b8>] ? add_preempt_count+0xa9/0xae [<ffffffff814e0a21>] mutex_lock_nested+0x5e/0x315 [<ffffffff810d6684>] ? pcpu_alloc+0x67/0x325 [<ffffffff81098f81>] ? __lock_acquire+0x6dc/0x753 [<ffffffff810c9fb0>] ? __pagevec_release+0x2c/0x2c [<ffffffff810d6684>] pcpu_alloc+0x67/0x325 [<ffffffff810c9fb0>] ? __pagevec_release+0x2c/0x2c [<ffffffff810d694d>] __alloc_percpu+0xb/0xd [<ffffffff8106c35e>] schedule_on_each_cpu+0x23/0x110 [<ffffffff810c9fcb>] lru_add_drain_all+0x10/0x12 [<ffffffff810f126f>] __compact_pgdat+0x20/0x182 [<ffffffff810f15c2>] compact_pgdat+0x27/0x29 [<ffffffff810c306b>] ? zone_watermark_ok+0x1a/0x1c [<ffffffff810cdf6f>] balance_pgdat+0x732/0x751 [<ffffffff810ce0ed>] kswapd+0x15f/0x178 [<ffffffff810cdf8e>] ? balance_pgdat+0x751/0x751 [<ffffffff8106fd11>] kthread+0x84/0x8c [<ffffffff814e51e4>] kernel_thread_helper+0x4/0x10 [<ffffffff810787ed>] ? finish_task_switch+0x85/0xea [<ffffffff814e3861>] ? retint_restore_args+0xe/0xe [<ffffffff8106fc8d>] ? __init_kthread_worker+0x56/0x56 [<ffffffff814e51e0>] ? gs_change+0xb/0xb The RECLAIM_FS notations indicate that it's doing the GFP_FS checking that Nick hacked into lockdep a while back: I think we're intended to read that "<Interrupt>" in the DEADLOCK scenario as "<Direct reclaim>". I'm hazy, I have not reached any conclusion as to whether it's right to complain or not; but I believe it's uneasy about kswapd now doing the mutex_lock(&pcpu_alloc_mutex) which lru_add_drain_all() entails. Nor have I reached any conclusion as to whether it's important for kswapd to do that draining or not. But so as not to get blocked on this, with lockdep disabled from giving further reports, here's a patch which removes the lru_add_drain_all() from kswapd's callpath (and calls it only once from compact_nodes(), instead of once per node). Signed-off-by:Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Rik van Riel authored
Currently a failed order-9 (transparent hugepage) compaction can lead to memory compaction being temporarily disabled for a memory zone. Even if we only need compaction for an order 2 allocation, eg. for jumbo frames networking. The fix is relatively straightforward: keep track of the highest order at which compaction is succeeding, and only defer compaction for orders at which compaction is failing. Signed-off-by:
-
Rik van Riel authored
With CONFIG_COMPACTION enabled, kswapd does not try to free contiguous free pages, even when it is woken for a higher order request. This could be bad for eg. jumbo frame network allocations, which are done from interrupt context and cannot compact memory themselves. Higher than before allocation failure rates in the network receive path have been observed in kernels with compaction enabled. Teach kswapd to defragment the memory zones in a node, but only if required and compaction is not deferred in a zone. [akpm@linux-foundation.org: reduce scope of zones_need_compaction] Signed-off-by:
-
Rik van Riel authored
When built with CONFIG_COMPACTION, kswapd should not try to free contiguous pages, because it is not trying hard enough to have a real chance at being successful, but still disrupts the LRU enough to break other things. Do not do higher order page isolation unless we really are in lumpy reclaim mode. Stop reclaiming pages once we have enough free pages that compaction can deal with things, and we hit the normal order 0 watermarks used by kswapd. Also remove a line of code that increments balanced right before exiting the function. Signed-off-by:
-
Rik van Riel authored
Ever since abandoning the virtual scan of processes, for scalability reasons, swap space has been a little more fragmented than before. This can lead to the situation where a large memory user is killed, swap space ends up full of "holes" and swapin readahead is totally ineffective. On my home system, after killing a leaky firefox it took over an hour to page just under 2GB of memory back in, slowing the virtual machines down to a crawl. This patch makes swapin readahead simply skip over holes, instead of stopping at them. This allows the system to swap things back in at rates of several MB/second, instead of a few hundred kB/second. The checks done in valid_swaphandles are already done in read_swap_cache_async as well, allowing us to remove a fair amount of code. [akpm@linux-foundation.org: fix it for page_cluster >= 32] Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Adrian Drzewiecki <z@drze.net> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Hillf Danton authored
The value of nr_reclaimed is the number of pages reclaimed in the current round of the loop, whereas nr_to_reclaim should be compared with the number of pages reclaimed in all rounds. In each round of the loop, reclaimed pages are cut off from the reclaim goal, and the loop stops once the goal achieved. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Konstantin Khlebnikov authored
Make get_mm_counter() always static inline, it is simple enough for that. And remove unused set_mm_counter() bloat-o-meter: add/remove: 0/1 grow/shrink: 4/12 up/down: 99/-341 (-242) function old new delta try_to_unmap_one 886 952 +66 sys_remap_file_pages 1214 1230 +16 dup_mm 1684 1700 +16 do_exit 2277 2278 +1 zap_page_range 208 205 -3 unmap_region 304 296 -8 static.oom_kill_process 554 546 -8 try_to_unmap_file 1716 1700 -16 getrusage 925 909 -16 flush_old_exec 1704 1688 -16 static.dump_header 416 390 -26 acct_update_integrals 218 187 -31 do_task_stat 2986 2954 -32 get_mm_counter 34 - -34 xacct_add_tsk 371 334 -37 task_statm 172 118 -54 task_mem 383 323 -60 try_to_unmap_one() grows because update_hiwater_rss() now completely inline. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
-
Hillf Danton authored
With tons of reclaim_mode (defined as one field of struct scan_control) already in the file, it is clearer to rename the local reclaim_mode when setting up the isolation mode. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
-
Konstantin Khlebnikov authored
Warn about non-zero rss counters at final mmdrop. This check will prevent reoccurences of bugs such as that fixed in "mm: fix rss count leakage during migration". I didn't hide this check under CONFIG_VM_DEBUG because it rather small and rss counters cover whole page-table management, so this is a good invariant. Signed-off-by:
-
David Rientjes authored
printk_ratelimit() uses the global ratelimit state for all printks. The oom killer should not be subjected to this state just because another subsystem or driver may be flooding the kernel log. This patch introduces printk ratelimiting specifically for the oom killer. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
-
David Rientjes authored
If a thread is chosen for oom kill and is already PF_EXITING, then the oom killer simply sets TIF_MEMDIE and returns. This allows the thread to have access to memory reserves so that it may quickly exit. This logic is preceeded with a comment saying there's no need to alarm the sysadmin. This patch adds truth to that statement. There's no need to emit any warning about the oom condition if the thread is already exiting since it will not be killed. In this condition, just silently return the oom killer since its only giving access to memory reserves and is otherwise a no-op. Acked-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
David Rientjes authored
oom_kill_task() has a single caller, so fold it into its parent function, oom_kill_process(). Slightly reduces the number of lines in the oom killer. Acked-by:
-
David Rientjes authored
oom_kill_task() returns non-zero iff the chosen process does not have any threads with an attached ->mm. In such a case, it's better to just return to the page allocator and retry the allocation because memory could have been freed in the interim and the oom condition may no longer exist. It's unnecessary to loop in the oom killer and find another thread to kill. This allows both oom_kill_task() and oom_kill_process() to be converted to void functions. If the oom condition persists, the oom killer will be recalled. Acked-by:
-
Matt Fleming authored
Use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
"David S. Miller" <davem@davemloft.net> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Matt Fleming authored
As described in commit e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
-
Matt Fleming authored
setup_frame() needs to return an indication of whether it succeeded or failed in setting up the signal stack frame. If setup_frame() fails then we must not modify current->blocked. Acked-by:
-
Matt Fleming authored
get_signal_to_deliver() already resets the signal handler if SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again in handle_signal(). Furthermore, because we were modifying ka->sa.sa_handler (which is a copy of sighand->action[]) instead of sighand->action[] the original code actually had no effect on signal delivery. Acked-by:
-
Matt Fleming authored
Instead of open coding the sequence from force_sigsegv() just call it. This also fixes a bug because we were modifying ka->sa.sa_handler (which is a copy of sighand->action[]), whereas the intention of the code was to modify sighand->action[] directly. As the original code was working with a copy it had no effect on signal delivery. Acked-by:
-
Earl Chew authored
The following program illustrates the problem: char buf[8192]; int fd = open("/proc/self/maps", O_RDONLY); n = pread(fd, buf, sizeof(buf), 0); printf("%d\n", n); /* lseek(fd, 0, SEEK_CUR); */ /* Uncomment to work around */ n = pread(fd, buf, sizeof(buf), 0); printf("%d\n", n); The second printf() prints zero, but uncommenting the lseek() corrects its behaviour. To fix, make seq_read() mirror seq_lseek() when processing changes in *ppos. Restore m->version first, then if required traverse and update read_pos on success. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=11856Signed-off-by:Earl Chew <echew@ixiacom.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Marcos Paulo de Souza authored
Fix a code indentation in the function intel_idle_cpu_init that looks confusing.o Suggested-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-by:
Marcos Paulo de Souza <marcos.mage@gmail.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
-
Andrew Morton authored
i386 allnoconfig: fs/namei.c: In function 'has_zero': fs/namei.c:1617: warning: integer constant is too large for 'unsigned long' type fs/namei.c:1617: warning: integer constant is too large for 'unsigned long' type fs/namei.c: In function 'hash_name': fs/namei.c:1635: warning: integer constant is too large for 'unsigned long' type There must be a tidier way of doing this. Signed-off-by:
-
Andrea Arcangeli authored
In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(¤t->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by:Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Larry Woodman <lwoodman@redhat.com> Acked-by:
-
- 21 Mar, 2012 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon changes for v3.4 from Guenter Roeck: "Mostly cleanup. No new drivers this time around, but support for several chips added to existing drivers: TPS40400, TPS40422, MTD040, MAX34446, ZL9101M, ZL9117M, and LM96080. Also, added watchdog support for SCH56xx, and additional attributes for a couple of drivers." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (137 commits) hwmon: (sch56xx) Add support for the integrated watchdog (v2) hwmon: (w83627ehf) Add support for temperature offset registers hwmon: (jc42) Remove unnecessary device IDs hwmon: (zl6100) Add support for ZL9101M and ZL9117M hwmon: (adm1275) Add support for ADM1075 hwmon: (max34440) Add support for MAX34446 hwmon: (pmbus) Add more virtual registers hwmon: (pmbus) Add support for Lineage Power MDT040 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422 hwmon: (max34440) Add support for 'lowest' output voltage attribute hwmon: (jc42) Convert to use devm_kzalloc hwmon: (max16065) Convert to use devm_kzalloc hwmon: (smm665) Convert to use devm_kzalloc hwmon: (ltc4261) Convert to use devm_kzalloc hwmon: (pmbus) Simplify remove functions hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc hwmon: (lineage-pem) Convert to use devm_kzalloc hwmon: (hwmon-vid) Fix checkpatch issues hwmon: (hwmon-vid) Add new entries to VRM model table hwmon: (lm80) Add detection of NatSemi/TI LM96080 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates for 3.4 from Mark Brown: "This has been a fairly quiet release from a regulator point of view, the only real framework features added were devm support and a convenience helper for setting up fixed voltage regulators. We also added a couple of drivers (but will drop the BQ240022 driver via the arm-soc tree as it's been replaced by the more generic gpio-regulator driver) and Axel Lin continued his relentless and generally awesome stream of fixes and cleanups." * tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (93 commits) regulator: Fix up a confusing dev_warn when DT lookup fails regulator: Convert tps6507x to set_voltage_sel regulator: Refactor tps6507x to use one tps6507x_pmic_ops for all LDOs and DCDCs regulator: Make s5m8767_get_voltage_register always return correct register regulator: s5m8767: Check pdata->buck[2|3|4]_gpiodvs earlier regulator: tps65910: Provide settling time for DCDC voltage change regulator: Add Anatop regulator driver regulator: Simplify implementation of tps65912_get_voltage_dcdc regulator: Use tps65912_set_voltage_sel for both DCDCx and LDOx regulator: tps65910: Provide settling time for enabling rails regulator: max8925: Use DIV_ROUND_UP macro regulator: tps65912: Use simple equations to get register address regulator: Fix the logic of tps65910_get_mode regulator: Merge tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops to tps65217_pmic_ops regulator: Use DIV_ROUND_CLOSEST in wm8350_isink_get_current regulator: Use array to store dcdc_range settings for tps65912 regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_sel regulator: tps6524x: Remove unneeded comment for N_REGULATORS regulator: Rename set_voltage_sel callback function name to *_sel regulator: Fix s5m8767_set_voltage_time_sel calculation value ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull InfiniBand/RDMA changes for the 3.4 merge window from Roland Dreier: "Nothing big really stands out; by patch count lots of fixes to the mlx4 driver plus some cleanups and fixes to the core and other drivers." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (28 commits) mlx4_core: Scale size of MTT table with system RAM mlx4_core: Allow dynamic MTU configuration for IB ports IB/mlx4: Fix info returned when querying IBoE ports IB/mlx4: Fix possible missed completion event mlx4_core: Report thermal error events mlx4_core: Fix one more static exported function IB: Change CQE "csum_ok" field to a bit flag RDMA/iwcm: Reject connect requests if cmid is not in LISTEN state RDMA/cxgb3: Don't pass irq flags to flush_qp() mlx4_core: Get rid of redundant ext_port_cap flags RDMA/ucma: Fix AB-BA deadlock IB/ehca: Fix ilog2() compile failure IB: Use central enum for speed instead of hard-coded values IB/iser: Post initial receive buffers before sending the final login request IB/iser: Free IB connection resources in the proper place IB/srp: Consolidate repetitive sysfs code IB/srp: Use pr_fmt() and pr_err()/pr_warn() IB/core: Fix SDR rates in sysfs mlx4: Enforce device max FMR maps in FMR alloc IB/mlx4: Set bad_wr for invalid send opcode ...
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull SPI changes for v3.4 from Grant Likely: "Mostly a bunch of new drivers and driver bug fixes; but this also includes a few patches that create a core message queue infrastructure for the spi subsystem instead of making each driver open code it." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits) spi/fsl-espi: Make sure pm is within 2..32 spi/fsl-espi: make the clock computation easier to read spi: sh-hspi: modify write/read method spi: sh-hspi: control spi clock more correctly spi: sh-hspi: convert to using core message queue spi: s3c64xx: Fix build spi: s3c64xx: remove unnecessary callback msg->complete spi: remove redundant variable assignment spi: release lock on error path in spi_pump_messages() spi: Compatibility with direction which is used in samsung DMA operation spi-topcliff-pch: add recovery processing in case wait-event timeout spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control spi-topcliff-pch: Fix issue for transmitting over 4KByte spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info spi/imx: simplify error handling to free gpios spi: Convert to DEFINE_PCI_DEVICE_TABLE spi: add Broadcom BCM63xx SPI controller driver SPI: add CSR SiRFprimaII SPI controller driver spi-topcliff-pch: fix -Wuninitialized warning spi: Mark spi_register_board_info() __devinit ...
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull core device tree changes for Linux v3.4 from Grant Likely: "This branch contains a minor documentation addition, a utility function for parsing string properties needed by some of the new ARM platforms, disables dynamic DT code that isn't used anywhere but on a few PPC machines, and exports DT node compatible data to userspace via UEVENT properties. Nothing earth shattering here." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6: of: Only compile OF_DYNAMIC on PowerPC pseries and iseries arm/dts: OMAP3: Add omap3evm and am335xevm support drivercore: Output common devicetree information in uevent of: Add of_property_match_string() to find index into a string list
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull irq_domain support for all architectures from Grant Likely: "Generialize powerpc's irq_host as irq_domain This branch takes the PowerPC irq_host infrastructure (reverse mapping from Linux IRQ numbers to hardware irq numbering), generalizes it, renames it to irq_domain, and makes it available to all architectures. Originally the plan has been to create an all-new irq_domain implementation which addresses some of the powerpc shortcomings such as not handling 1:1 mappings well, but doing that proved to be far more difficult and invasive than generalizing the working code and refactoring it in-place. So, this branch rips out the 'new' irq_domain and replaces it with the modified powerpc version (in a fully bisectable way of course). It converts all users over to the new API and makes irq_domain selectable on any architecture. No architecture is forced to enable irq_domain, but the infrastructure is required for doing OpenFirmware style irq translations. It will even work on SPARC even though SPARC has it's own mechanism for translating irqs at boot time. MIPS, microblaze, embedded x86 and c6x are converted too. The resulting irq_domain code is probably still too verbose and can be optimized more, but that can be done incrementally and is a task for follow-on patches." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits) dt: fix twl4030 for non-dt compile on x86 mfd: twl-core: Add IRQ_DOMAIN dependency devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc) irq_domain: Centralize definition of irq_dispose_mapping() irq_domain/mips: Allow irq_domain on MIPS irq_domain/x86: Convert x86 (embedded) to use common irq_domain ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c irq_domain/microblaze: Convert microblaze to use irq_domains irq_domain/powerpc: Replace custom xlate functions with library functions irq_domain/powerpc: constify irq_domain_ops irq_domain/c6x: Use library of xlate functions irq_domain/c6x: constify irq_domain structures irq_domain/c6x: Convert c6x to use generic irq_domain support. irq_domain: constify irq_domain_ops irq_domain: Create common xlate functions that device drivers can use irq_domain: Remove irq_domain_add_simple() irq_domain: Remove 'new' irq_domain in favour of the ppc one mfd: twl-core.c: Fix the number of interrupts managed by twl4030 of/address: add empty static inlines for !CONFIG_OF irq_domain: Add support for base irq and hwirq in legacy mappings ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates for 3.4 from Rafael Wysocki: "Assorted extensions and fixes including: * Introduction of early/late suspend/hibernation device callbacks. * Generic PM domains extensions and fixes. * devfreq updates from Axel Lin and MyungJoo Ham. * Device PM QoS updates. * Fixes of concurrency problems with wakeup sources. * System suspend and hibernation fixes." * tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits) PM / Domains: Check domain status during hibernation restore of devices PM / devfreq: add relation of recommended frequency. PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on() PM / shmobile: Make CMT driver use pm_genpd_dev_always_on() PM / shmobile: Make TMU driver use pm_genpd_dev_always_on() PM / Domains: Introduce "always on" device flag PM / Domains: Fix hibernation restore of devices, v2 PM / Domains: Fix handling of wakeup devices during system resume sh_mmcif / PM: Use PM QoS latency constraint tmio_mmc / PM: Use PM QoS latency constraint PM / QoS: Make it possible to expose PM QoS latency constraints PM / Sleep: JBD and JBD2 missing set_freezable() PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case PM / Freezer: Remove references to TIF_FREEZE in comments PM / Sleep: Add more wakeup source initialization routines PM / Hibernate: Enable usermodehelpers in hibernate() error path PM / Sleep: Make __pm_stay_awake() delete wakeup source timers PM / Sleep: Fix race conditions related to wakeup source timer function PM / Sleep: Fix possible infinite loop during wakeup source destruction PM / Hibernate: print physical addresses consistently with other parts of kernel ...
-
git://github.com/congwang/linuxLinus Torvalds authored
Pull kmap_atomic cleanup from Cong Wang. It's been in -next for a long time, and it gets rid of the (no longer used) second argument to k[un]map_atomic(). Fix up a few trivial conflicts in various drivers, and do an "evil merge" to catch some new uses that have come in since Cong's tree. * 'kmap_atomic' of git://github.com/congwang/linux: (59 commits) feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] drbd: remove the second argument of k[un]map_atomic() zcache: remove the second argument of k[un]map_atomic() gma500: remove the second argument of k[un]map_atomic() dm: remove the second argument of k[un]map_atomic() tomoyo: remove the second argument of k[un]map_atomic() sunrpc: remove the second argument of k[un]map_atomic() rds: remove the second argument of k[un]map_atomic() net: remove the second argument of k[un]map_atomic() mm: remove the second argument of k[un]map_atomic() lib: remove the second argument of k[un]map_atomic() power: remove the second argument of k[un]map_atomic() kdb: remove the second argument of k[un]map_atomic() udf: remove the second argument of k[un]map_atomic() ubifs: remove the second argument of k[un]map_atomic() squashfs: remove the second argument of k[un]map_atomic() reiserfs: remove the second argument of k[un]map_atomic() ocfs2: remove the second argument of k[un]map_atomic() ntfs: remove the second argument of k[un]map_atomic() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: "It contains HID driver updates all over the place -- a lot of new hardware support especially in the multitouch area, including generic handling of all multitouch devices by the hid-multitiouch driver automatically." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (42 commits) HID: multitouch: add PID for Fructel product HID: wacom: Add reporting of wheel for Intuos4 WL HID: wacom: Replace __set_bit with input_set_capability HID: tivo: add support for BT-version (0x1200) HID: wacom: Reset stylus buttons - Intuos4 WL HID: multitouch: detect serial protocol HID: handle all multitouch devices through hid-multitouch HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T HID: make it possible to force hid-core claim the device HID: multitouch: add support for eGalax 0x722a HID: usbhid: add quirk no_get for quanta 3008 devices HID: multitouch: add more eGalax devices HID: multitouch: add new PID from Ideacom HID: multitouch: add support for Atmel maXTouch 03eb:2118 HID: waltop: Add support for tablet with PID 0038 HID: waltop: Replace original rdescs with links HID: uclogic: Replace original rdescs with links HID: wacom: Add pad buttons reporting on Intuos4 WL HID: wacom: report distance for Intuos4 WL HID: kye: Add support for 3 tablets ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David. -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue changes from Tejun Heo: "This contains only one commit which cleans up UP allocation path a bit." * 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: use percpu allocator for cwq on UP
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup changes from Tejun Heo: "Out of the 8 commits, one fixes a long-standing locking issue around tasklist walking and others are cleanups." * 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Walk task list under tasklist_lock in cgroup_enable_task_cg_list cgroup: Remove wrong comment on cgroup_enable_task_cg_list() cgroup: remove cgroup_subsys argument from callbacks cgroup: remove extra calls to find_existing_css_set cgroup: replace tasklist_lock with rcu_read_lock cgroup: simplify double-check locking in cgroup_attach_proc cgroup: move struct cgroup_pidlist out from the header file cgroup: remove cgroup_attach_task_current_cg()
-
- 20 Mar, 2012 4 commits
-
-
Oleg Nesterov authored
Minor cleanup. de_thread()->setmax_mm_hiwater_rss() looks a bit strange, move it into exec_mmap() which plays with old_mm. Signed-off-by:
-
Oleg Nesterov authored
exit_notify() changes ->exit_signal if the parent already did exec. This doesn't really work, we are not going to send the signal now if there is another live thread or the exiting task is traced. The parent can exec before the last dies or the tracer detaches. Move this check into do_notify_parent() which actually sends the signal. The user-visible change is that we do not change ->exit_signal, and thus the exiting task is still "clone children" for do_wait()->eligible_child(__WCLONE). Hopefully this is fine, the current logic is racy anyway. Signed-off-by:
-
Oleg Nesterov authored
exit_notify() checks "tsk->self_exec_id != tsk->parent_exec_id" to handle the "we have changed execution domain" case. We can change do_thread() to always set ->exit_signal = SIGCHLD and remove this check to simplify the code. We could change setup_new_exec() instead, this looks more logical because it increments ->self_exec_id. But note that de_thread() already resets ->exit_signal if it changes the leader, let's keep both changes close to each other. Note that we change ->exit_signal lockless, this changes the rules. Thereafter ->exit_signal is not stable under tasklist but this is fine, the only possible change is OLDSIG -> SIGCHLD. This can race with eligible_child() but the race is harmless. We can race with reparent_leader() which changes our ->exit_signal in parallel, but it does the same change to SIGCHLD. The noticeable user-visible change is that the execing task is not "visible" to do_wait()->eligible_child(__WCLONE) right after exec. To me this looks more logical, and this is consistent with mt case. Signed-off-by:
-
Oleg Nesterov authored
The child must not control its ->exit_signal, it is the parent who decides which signal the child should use for notification. This means that CLONE_PARENT should not use "clone_flags & CSIGNAL", the forking task is the sibling of the new process and their parent doesn't control exit_signal in this case. This patch uses ->exit_signal of the forking process, but perhaps we should simply use SIGCHLD. We read group_leader->exit_signal lockless, this can race with the ORIGINAL_SIGNAL -> SIGCHLD transition, but this is fine. Potentially this change allows to kill self_exec_id/parent_exec_id. Signed-off-by:
-
