- 11 Jul, 2016 2 commits
-
-
WANG Cong authored
[ Upstream commit d15eccea ] And avoid calling tcf_hash_check() twice. Fixes: a57f19d3 ("net sched: ipt action fix late binding") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 6c0d54f1 ] When the qdisc is full, we drop a packet at the head of the queue, queue the current skb and return NET_XMIT_CN Now we track backlog on upper qdiscs, we need to call qdisc_tree_reduce_backlog(), even if the qlen did not change. Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
-
- 24 Jun, 2016 38 commits
-
-
Greg Kroah-Hartman authored
-
Linus Walleij authored
commit 79bb71bd upstream. commit 54d77198 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by:
Hans de Goede <hdegoede@redhat.com> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Florian Westphal authored
commit d7591f0c upstream. The three variants use same copy&pasted code, condense this into a helper and use that. Make sure info.name is 0-terminated. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Florian Westphal authored
commit 09d96860 upstream. This looks like refactoring, but its also a bug fix. Problem is that the compat path (32bit iptables, 64bit kernel) lacks a few sanity tests that are done in the normal path. For example, we do not check for underflows and the base chain policies. While its possible to also add such checks to the compat path, its more copy&pastry, for instance we cannot reuse check_underflow() helper as e->target_offset differs in the compat case. Other problem is that it makes auditing for validation errors harder; two places need to be checked and kept in sync. At a high level 32 bit compat works like this: 1- initial pass over blob: validate match/entry offsets, bounds checking lookup all matches and targets do bookkeeping wrt. size delta of 32/64bit structures assign match/target.u.kernel pointer (points at kernel implementation, needed to access ->compatsize etc.) 2- allocate memory according to the total bookkeeping size to contain the translated ruleset 3- second pass over original blob: for each entry, copy the 32bit representation to the newly allocated memory. This also does any special match translations (e.g. adjust 32bit to 64bit longs, etc). 4- check if ruleset is free of loops (chase all jumps) 5-first pass over translated blob: call the checkentry function of all matches and targets. The alternative implemented by this patch is to drop steps 3&4 from the compat process, the translation is changed into an intermediate step rather than a full 1:1 translate_table replacement. In the 2nd pass (step #3), change the 64bit ruleset back to a kernel representation, i.e. put() the kernel pointer and restore ->u.user.name . This gets us a 64bit ruleset that is in the format generated by a 64bit iptables userspace -- we can then use translate_table() to get the 'native' sanity checks. This has two drawbacks: 1. we re-validate all the match and target entry structure sizes even though compat translation is supposed to never generate bogus offsets. 2. we put and then re-lookup each match and target. THe upside is that we get all sanity tests and ruleset validations provided by the normal path and can remove some duplicated compat code. iptables-restore time of autogenerated ruleset with 300k chains of form -A CHAIN0001 -m limit --limit 1/s -j CHAIN0002 -A CHAIN0002 -m limit --limit 1/s -j CHAIN0003 shows no noticeable differences in restore times: old: 0m30.796s new: 0m31.521s 64bit: 0m25.674s Signed-off-by:
-
Florian Westphal authored
commit 0188346f upstream. Always returned 0. Signed-off-by:
-
Florian Westphal authored
commit 329a0807 upstream. Signed-off-by:
-
Florian Westphal authored
commit 7d3f843e upstream. Signed-off-by:
-
Florian Westphal authored
commit 8dddd327 upstream. Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 9dbaab56. Turns out it was a bad idea and was fixed up "properly" in 4.7 but those patches are too big to put into 4.6, so let's just revert it for now. Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Peter Frühberger <peter.fruehberger@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Florian Westphal authored
commit 7b7eba0f upstream. Quoting John Stultz: In updating a 32bit arm device from 4.6 to Linus' current HEAD, I noticed I was having some trouble with networking, and realized that /proc/net/ip_tables_names was suddenly empty. Digging through the registration process, it seems we're catching on the: if (strcmp(t->u.user.name, XT_STANDARD_TARGET) == 0 && target_offset + sizeof(struct xt_standard_target) != next_offset) return -EINVAL; Where next_offset seems to be 4 bytes larger then the offset + standard_target struct size. next_offset needs to be aligned via XT_ALIGN (so we can access all members of ip(6)t_entry struct). This problem didn't show up on i686 as it only needs 4-byte alignment for u64, but iptables userspace on other 32bit arches does insert extra padding. Reported-by:
John Stultz <john.stultz@linaro.org> Tested-by:
-
Florian Westphal authored
commit 13631bfc upstream. Validate that all matches (if any) add up to the beginning of the target and that each match covers at least the base structure size. The compat path should be able to safely re-use the function as the structures only differ in alignment; added a BUILD_BUG_ON just in case we have an arch that adds padding as well. Signed-off-by:
-
Florian Westphal authored
commit ce683e5f upstream. We're currently asserting that targetoff + targetsize <= nextoff. Extend it to also check that targetoff is >= sizeof(xt_entry). Since this is generic code, add an argument pointing to the start of the match/target, we can then derive the base structure size from the delta. We also need the e->elems pointer in a followup change to validate matches. Signed-off-by:
-
Florian Westphal authored
commit 7ed2abdd upstream. We have targets and standard targets -- the latter carries a verdict. The ip/ip6tables validation functions will access t->verdict for the standard targets to fetch the jump offset or verdict for chainloop detection, but this happens before the targets get checked/validated. Thus we also need to check for verdict presence here, else t->verdict can point right after a blob. Spotted with UBSAN while testing malformed blobs. Signed-off-by:
-
Florian Westphal authored
commit fc1221b3 upstream. 32bit rulesets have different layout and alignment requirements, so once more integrity checks get added to xt_check_entry_offsets it will reject well-formed 32bit rulesets. Signed-off-by:
-
Florian Westphal authored
commit a08e4e19 upstream. The target size includes the size of the xt_entry_target struct. Signed-off-by:
-
Florian Westphal authored
commit aa412ba2 upstream. Once we add more sanity testing to xt_check_entry_offsets it becomes relvant if we're expecting a 32bit 'config_compat' blob or a normal one. Since we already have a lot of similar-named functions (check_entry, compat_check_entry, find_and_check_entry, etc.) and the current incarnation is short just fold its contents into the callers. Signed-off-by:
-
Florian Westphal authored
commit 7d35812c upstream. Currently arp/ip and ip6tables each implement a short helper to check that the target offset is large enough to hold one xt_entry_target struct and that t->u.target_size fits within the current rule. Unfortunately these checks are not sufficient. To avoid adding new tests to all of ip/ip6/arptables move the current checks into a helper, then extend this helper in followup patches. Signed-off-by:
-
Florian Westphal authored
commit 36472341 upstream. When we see a jump also check that the offset gets us to beginning of a rule (an ipt_entry). The extra overhead is negible, even with absurd cases. 300k custom rules, 300k jumps to 'next' user chain: [ plus one jump from INPUT to first userchain ]: Before: real 0m24.874s user 0m7.532s sys 0m16.076s After: real 0m27.464s user 0m7.436s sys 0m18.840s Signed-off-by:
-
Florian Westphal authored
commit f24e230d upstream. Ben Hawkes says: In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it is possible for a user-supplied ipt_entry structure to have a large next_offset field. This field is not bounds checked prior to writing a counter value at the supplied offset. Base chains enforce absolute verdict. User defined chains are supposed to end with an unconditional return, xtables userspace adds them automatically. But if such return is missing we will move to non-existent next rule. Reported-by:
Ben Hawkes <hawkes@google.com> Signed-off-by:
-
Maarten Lankhorst authored
commit f2d580b9 upstream. It turns out that preserving framebuffers after the rmfb call breaks vmwgfx userspace. This was originally introduced because it was thought nobody relied on the behavior, but unfortunately it seems there are exceptions. drm_framebuffer_remove may fail with -EINTR now, so a straight revert is impossible. There is no way to remove the framebuffer from the lists and active planes without introducing a race because of the different locking requirements. Instead call drm_framebuffer_remove from a workqueue, which is unaffected by signals. Changes since v1: - Add comment. Changes since v2: - Add fastpath for refcount = 1. (danvet) Changes since v3: - Rebased. - Restore lastclose framebuffer removal too. Fixes: 13803132 ("drm/core: Preserve the framebuffer after removing it.") Testcase: kms_rmfb_basic References: https://lists.freedesktop.org/archives/dri-devel/2016-March/102876.html Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Thomas Hellstrom <thellstrom@vmware.com> #v3 Tested-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Helmut Grohne authored
commit 0f84f29f upstream. When the PM initialization was moved in the commit referenced below, the code enabling the clock was removed from the probe function. On CONFIG_PM=y kernels, this is not a problem as the pm resume hook enables the clock, but when power management is disabled, all those pm_* functions are noops and the clock is never enabled resulting in a dysfunctional gpio controller. Put the clock initialization back to support CONFIG_PM=n. Signed-off-by:
Helmut Grohne <h.grohne@intenta.de> Fixes: 3773c195 ("gpio: zynq: Do PM initialization earlier to support gpio hogs") Signed-off-by:
-
Shubhrajyoti Datta authored
commit 615d23f8 upstream. pm_runtime_disable is called only in remove it is missed out in the error path. Fix the same. Signed-off-by:
Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 7cafc0b8 ] We must handle data access exception as well as memory address unaligned exceptions from return from trap window fill faults, not just normal TLB misses. Otherwise we can get an OOPS that looks like this: ld-linux.so.2(36808): Kernel bad sw trap 5 [#1] CPU: 1 PID: 36808 Comm: ld-linux.so.2 Not tainted 4.6.0 #34 task: fff8000303be5c60 ti: fff8000301344000 task.ti: fff8000301344000 TSTATE: 0000004410001601 TPC: 0000000000a1a784 TNPC: 0000000000a1a788 Y: 00000002 Not tainted TPC: <do_sparc64_fault+0x5c4/0x700> g0: fff8000024fc8248 g1: 0000000000db04dc g2: 0000000000000000 g3: 0000000000000001 g4: fff8000303be5c60 g5: fff800030e672000 g6: fff8000301344000 g7: 0000000000000001 o0: 0000000000b95ee8 o1: 000000000000012b o2: 0000000000000000 o3: 0000000200b9b358 o4: 0000000000000000 o5: fff8000301344040 sp: fff80003013475c1 ret_pc: 0000000000a1a77c RPC: <do_sparc64_fault+0x5bc/0x700> l0: 00000000000007ff l1: 0000000000000000 l2: 000000000000005f l3: 0000000000000000 l4: fff8000301347e98 l5: fff8000024ff3060 l6: 0000000000000000 l7: 0000000000000000 i0: fff8000301347f60 i1: 0000000000102400 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000000000 i6: fff80003013476a1 i7: 0000000000404d4c I7: <user_rtt_fill_fixup+0x6c/0x7c> Call Trace: [0000000000404d4c] user_rtt_fill_fixup+0x6c/0x7c The window trap handlers are slightly clever, the trap table entries for them are composed of two pieces of code. First comes the code that actually performs the window fill or spill trap handling, and then there are three instructions at the end which are for exception processing. The userland register window fill handler is: add %sp, STACK_BIAS + 0x00, %g1; \ ldxa [%g1 + %g0] ASI, %l0; \ mov 0x08, %g2; \ mov 0x10, %g3; \ ldxa [%g1 + %g2] ASI, %l1; \ mov 0x18, %g5; \ ldxa [%g1 + %g3] ASI, %l2; \ ldxa [%g1 + %g5] ASI, %l3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %l4; \ ldxa [%g1 + %g2] ASI, %l5; \ ldxa [%g1 + %g3] ASI, %l6; \ ldxa [%g1 + %g5] ASI, %l7; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i0; \ ldxa [%g1 + %g2] ASI, %i1; \ ldxa [%g1 + %g3] ASI, %i2; \ ldxa [%g1 + %g5] ASI, %i3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i4; \ ldxa [%g1 + %g2] ASI, %i5; \ ldxa [%g1 + %g3] ASI, %i6; \ ldxa [%g1 + %g5] ASI, %i7; \ restored; \ retry; nop; nop; nop; nop; \ b,a,pt %xcc, fill_fixup_dax; \ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; And the way this works is that if any of those memory accesses generate an exception, the exception handler can revector to one of those final three branch instructions depending upon which kind of exception the memory access took. In this way, the fault handler doesn't have to know if it was a spill or a fill that it's handling the fault for. It just always branches to the last instruction in the parent trap's handler. For example, for a regular fault, the code goes: winfix_trampoline: rdpr %tpc, %g3 or %g3, 0x7c, %g3 wrpr %g3, %tnpc done All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the trap time program counter, we'll get that final instruction in the trap handler. On return from trap, we have to pull the register window in but we do this by hand instead of just executing a "restore" instruction for several reasons. The largest being that from Niagara and onward we simply don't have enough levels in the trap stack to fully resolve all possible exception cases of a window fault when we are already at trap level 1 (which we enter to get ready to return from the original trap). This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's code branches directly to these to do the window fill by hand if necessary. Now if you look at them, we'll see at the end: ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; And oops, all three cases are handled like a fault. This doesn't work because each of these trap types (data access exception, memory address unaligned, and faults) store their auxiliary info in different registers to pass on to the C handler which does the real work. So in the case where the stack was unaligned, the unaligned trap handler sets up the arg registers one way, and then we branched to the fault handler which expects them setup another way. So the FAULT_TYPE_* value ends up basically being garbage, and randomly would generate the backtrace seen above. Reported-by:
Nick Alcock <nix@esperi.org.uk> Signed-off-by:
-
David S. Miller authored
[ Upstream commit d11c2a0d ] All signal frames must be at least 16-byte aligned, because that is the alignment we explicitly create when we build signal return stack frames. All stack pointers must be at least 8-byte aligned. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 9ea46abe ] On cheetahplus chips we take the ctx_alloc_lock in order to modify the TLB lookup parameters for the indexed TLBs, which are stored in the context register. This is called with interrupts disabled, however ctx_alloc_lock is an IRQ safe lock, therefore we must take acquire/release it properly with spin_{lock,unlock}_irq(). Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
Nitin Gupta authored
[ Upstream commit 24e49ee3 ] During hugepage map/unmap, TSB and TLB flushes are currently issued at every PAGE_SIZE'd boundary which is unnecessary. We now issue the flush at REAL_HPAGE_SIZE boundaries only. Without this patch workloads which unmap a large hugepage backed VMA region get CPU lockups due to excessive TLB flush calls. Orabug: 22365539, 22643230, 22995196 Signed-off-by:
Nitin Gupta <nitin.m.gupta@oracle.com> Signed-off-by:
-
Al Viro authored
commit 3d56c25e upstream. Ascend-to-parent logics in d_walk() depends on all encountered child dentries not getting freed without an RCU delay. Unfortunately, in quite a few cases it is not true, with hard-to-hit oopsable race as the result. Fortunately, the fix is simiple; right now the rule is "if it ever been hashed, freeing must be delayed" and changing it to "if it ever had a parent, freeing must be delayed" closes that hole and covers all cases the old rule used to cover. Moreover, pipes and sockets remain _not_ covered, so we do not introduce RCU delay in the cases which are the reason for having that delay conditional in the first place. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jann Horn authored
commit 29d64551 upstream. Until now, hitting this BUG_ON caused a recursive oops (because oops handling involves do_exit(), which calls into the scheduler, which in turn raises an oops), which caused stuff below the stack to be overwritten until a panic happened (e.g. via an oops in interrupt context, caused by the overwritten CPU index in the thread_info). Just panic directly. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jann Horn authored
commit e54ad7f1 upstream. This prevents stacking filesystems (ecryptfs and overlayfs) from using procfs as lower filesystem. There is too much magic going on inside procfs, and there is no good reason to stack stuff on top of procfs. (For example, procfs does access checks in VFS open handlers, and ecryptfs by design calls open handlers from a kernel thread that doesn't drop privileges or so.) Signed-off-by:
-
Andy Lutomirski authored
commit aaee8c3c upstream. Forcing in_interrupt() to return true if we're not in a bona fide interrupt confuses the softirq code. This fixes warnings like: NOHZ: local_softirq_pending 282 ... which can happen when running things like selftests/x86. This will change perf's static percpu buffer usage in IST context. I think this is okay, and it's changing the behavior to match historical (pre-4.0) behavior. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 95927475 ("x86, traps: Track entry into and exit from IST context") Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Gerald Schaefer authored
commit 770a5370 upstream. Christian Borntraeger reported a kernel panic after corrupt page counts, and it turned out to be a regression introduced with commit aa88b68c ("thp: keep huge zero page pinned until tlb flush"), at least on s390. put_huge_zero_page() was moved over from zap_huge_pmd() to release_pages(), and it was replaced by tlb_remove_page(). However, release_pages() might not always be triggered by (the arch-specific) tlb_remove_page(). On s390 we call free_page_and_swap_cache() from tlb_remove_page(), and not tlb_flush_mmu() -> free_pages_and_swap_cache() like the generic version, because we don't use the MMU-gather logic. Although both functions have very similar names, they are doing very unsimilar things, in particular free_page_xxx is just doing a put_page(), while free_pages_xxx calls release_pages(). This of course results in very harmful put_page()s on the huge zero page, on architectures where tlb_remove_page() is implemented in this way. It seems to affect only s390 and sh, but sh doesn't have THP support, so the problem (currently) probably only exists on s390. The following quick hack fixed the issue: Link: http://lkml.kernel.org/r/20160602172141.75c006a9@thinkpadSigned-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Prasun Maiti authored
commit 3d5fdff4 upstream. iwpriv app uses iw_point structure to send data to Kernel. The iw_point structure holds a pointer. For compatibility Kernel converts the pointer as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers may use iw_handler_def.private_args to populate iwpriv commands instead of iw_handler_def.private. For those case, the IOCTLs from SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl(). Accordingly when the filled up iw_point structure comes from 32 bit iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends it to driver. So, the driver may get the invalid data. The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory. This patch adds pointer conversion from 32 bit to 64 bit and vice versa, if the ioctl comes from 32 bit iwpriv to 64 bit Kernel. Signed-off-by:
Prasun Maiti <prasunmaiti87@gmail.com> Signed-off-by:
Ujjal Roy <royujjal@gmail.com> Tested-by:
Dibyajyoti Ghosh <dibyajyotig@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jann Horn authored
commit 2f36db71 upstream. This prevents users from triggering a stack overflow through a recursive invocation of pagefault handling that involves mapping procfs files into virtual memory. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Tejun Heo authored
commit 3a06bb78 upstream. memcg_offline_kmem() may be called from memcg_free_kmem() after a css init failure. memcg_free_kmem() is a ->css_free callback which is called without cgroup_mutex and memcg_offline_kmem() ends up using css_for_each_descendant_pre() without any locking. Fix it by adding rcu read locking around it. mkdir: cannot create directory `65530': No space left on device =============================== [ INFO: suspicious RCU usage. ] 4.6.0-work+ #321 Not tainted ------------------------------- kernel/cgroup.c:4008 cgroup_mutex or RCU read lock required! [ 527.243970] other info that might help us debug this: [ 527.244715] rcu_scheduler_active = 1, debug_locks = 0 2 locks held by kworker/0:5/1664: #0: ("cgroup_destroy"){.+.+..}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0 #1: ((&css->destroy_work)#3){+.+...}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0 [ 527.248098] stack backtrace: CPU: 0 PID: 1664 Comm: kworker/0:5 Not tainted 4.6.0-work+ #321 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Workqueue: cgroup_destroy css_free_work_fn Call Trace: dump_stack+0x68/0xa1 lockdep_rcu_suspicious+0xd7/0x110 css_next_descendant_pre+0x7d/0xb0 memcg_offline_kmem.part.44+0x4a/0xc0 mem_cgroup_css_free+0x1ec/0x200 css_free_work_fn+0x49/0x5e0 process_one_work+0x1c5/0x4a0 worker_thread+0x49/0x490 kthread+0xea/0x100 ret_from_fork+0x1f/0x40 Link: http://lkml.kernel.org/r/20160526203018.GG23194@mtj.duckdns.orgSigned-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Helge Deller authored
commit 8b78f260 upstream. One of the debian buildd servers had this crash in the syslog without any other information: Unaligned handler failed, ret = -2 clock_adjtime (pid 22578): Unaligned data reference (code 28) CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G E 4.5.0-2-parisc64-smp #1 Debian 4.5.4-1 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111100000001111 Tainted: G E r00-03 000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0 r04-07 00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff r08-11 0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4 r12-15 000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b r16-19 0000000000028800 0000000000000001 0000000000000070 00000001bde7c218 r20-23 0000000000000000 00000001bde7c210 0000000000000002 0000000000000000 r24-27 0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0 r28-31 0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218 sr00-03 0000000001200000 0000000001200000 0000000000000000 0000000001200000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88 IIR: 0ca0d089 ISR: 0000000001200000 IOR: 00000000fa6f7fff CPU: 1 CR30: 00000001bde7c000 CR31: ffffffffffffffff ORIG_R28: 00000002369fe628 IAOQ[0]: compat_get_timex+0x2dc/0x3c0 IAOQ[1]: compat_get_timex+0x2e0/0x3c0 RP(r2): compat_get_timex+0x40/0x3c0 Backtrace: [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0 [<0000000040205024>] syscall_exit+0x0/0x14 This means the userspace program clock_adjtime called the clock_adjtime() syscall and then crashed inside the compat_get_timex() function. Syscalls should never crash programs, but instead return EFAULT. The IIR register contains the executed instruction, which disassebles into "ldw 0(sr3,r5),r9". This load-word instruction is part of __get_user() which tried to read the word at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in. The unaligned handler is able to emulate all ldw instructions, but it fails if it fails to read the source e.g. because of page fault. The following program reproduces the problem: #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/mman.h> int main(void) { /* allocate 8k */ char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); /* free second half (upper 4k) and make it invalid. */ munmap(ptr+4096, 4096); /* syscall where first int is unaligned and clobbers into invalid memory region */ /* syscall should return EFAULT */ return syscall(__NR_clock_adjtime, 0, ptr+4095); } To fix this issue we simply need to check if the faulting instruction address is in the exception fixup table when the unaligned handler failed. If it is, call the fixup routine instead of crashing. While looking at the unaligned handler I found another issue as well: The target register should not be modified if the handler was unsuccessful. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
hongkun.cao authored
commit 5edf673d upstream. When a dual-edge irq is triggered, an incorrect irq will be reported on condition that the external signal is not stable and this incorrect irq has been registered. Correct the register offset. Signed-off-by:
Hongkun Cao <hongkun.cao@mediatek.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit dc47c0c1 upstream. When we converted the asm routines to C functions, we missed updating HPTE_R_R based on _PAGE_ACCESSED. ASM code used to copy over the lower bits from pte via. andi. r3,r30,0x1fe /* Get basic set of flags */ We also update the code such that we won't update the Change bit ('C' bit) always. This was added by commit c5cf0e30 ("powerpc: Fix buglet with MMU hash management"). With hash64, we need to make sure that hardware doesn't do a pte update directly. This is because we do end up with entries in TLB with no hash page table entry. This happens because when we find a hash bucket full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". For more info look at commit 0608d692("powerpc/mm: Always invalidate tlb on hpte invalidate and update"). Thus it's critical that valid hash PTEs always have reference bit set and writeable ones have change bit set. We do this by hashing a non-dirty linux PTE as read-only and always setting _PAGE_ACCESSED (and thus R) when hashing anything else in. Any attempt by Linux at clearing those bits also removes the corresponding hash entry. Commit 5cf0e30bf3d8 did that for 'C' bit by enabling 'C' bit always. We don't really need to do that because we never map a RW pte entry without setting 'C' bit. On READ fault on a RW pte entry, we still map it READ only, hence a store update in the page will still cause a hash pte fault. This patch reverts the part of commit c5cf0e30 ("[PATCH] powerpc: Fix buglet with MMU hash management") and retain the updatepp part. - If we hit the updatepp path on native, the old code without that commit, would fail to set C bcause native_hpte_updatepp() was implemented to filter the same bits as H_PROTECT and not let C through thus we would "upgrade" a RO HPTE to RW without setting C thus causing the bug. So the real fix in that commit was the change to native_hpte_updatepp Fixes: 89ff7250 ("powerpc/mm: Convert __hash_page_64K to C") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Thomas Huth authored
commit 7cc85103 upstream. If we do not provide the PVR for POWER8NVL, a guest on this system currently ends up in PowerISA 2.06 compatibility mode on KVM, since QEMU does not provide a generic PowerISA 2.07 mode yet. So some new instructions from POWER8 (like "mtvsrd") get disabled for the guest, resulting in crashes when using code compiled explicitly for POWER8 (e.g. with the "-mcpu=power8" option of GCC). Fixes: ddee09c0 ("powerpc: Add PVR for POWER8NVL processor") Signed-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
