- 01 Oct, 2020 40 commits
-
-
Sven Schnelle authored
[ Upstream commit 73ac74c7 ] Switch order so that locking state is consistent even if the IRQ tracer calls into lockdep again. Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ilya Leoshkevich authored
[ Upstream commit fcb2b70c ] Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch. Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Palmer Dabbelt authored
[ Upstream commit 66d18dbd ] Without this we get lockdep failures. They're spurious failures as SMP isn't up when ftrace_init_nop() is called. As far as I can tell the easiest fix is to just take the lock, which also seems like the safest fix. Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Acked-by:
Guo Ren <guoren@kernel.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 6a013710 ] The MPMAN Converter9 2-in-1 almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200901080623.4987-1-hdegoede@redhat.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit f5a2cda4 ] When the wm8958_mic_detect, wm8994_mic_detect functions get called from the machine driver, e.g. from the card's late_probe() callback, the CODEC device may be PM runtime suspended and any regmap writes have no effect. Add PM runtime calls to these functions to ensure the device registers are updated as expected. This suppresses an error during boot "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" caused by the regmap access error due to the cache_only flag being set. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.comSigned-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 811c5494 ] The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip initialization of that register for that device. This suppresses an error during boot: "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" Signed-off-by:
-
Anthony Iliopoulos authored
[ Upstream commit 05b29021 ] Commit 3b4b1972 ("nvme: fix possible deadlock when I/O is blocked") reverted multipath head disk revalidation due to deadlocks caused by holding the bd_mutex during revalidate. Updating the multipath disk blockdev size is still required though for userspace to be able to observe any resizing while the device is mounted. Directly update the bdev inode size to avoid unnecessarily holding the bdev->bd_mutex. Fixes: 3b4b1972 ("nvme: fix possible deadlock when I/O is blocked") Signed-off-by:
Anthony Iliopoulos <ailiop@suse.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit 659d4587 ] Compile the kernel for arm 32 platform, the build warning found. To fix that, should use div_u64() for divisions. | net/openvswitch/meter.c:396: undefined reference to `__udivdi3' [add more commit msg, change reported tag, and use div_u64 instead of do_div by Tonghao] Fixes: e5735887 ("net: openvswitch: use u64 for meter bucket") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jin Yao authored
[ Upstream commit 8510895b ] A big uncore event group is split into multiple small groups which only include the uncore events from the same PMU. This has been supported in the commit 3cdc5c2c ("perf parse-events: Handle uncore event aliases in small groups properly"). If the event's PMU name starts to repeat, it must be a new event. That can be used to distinguish the leader from other members. But now it only compares the pointer of pmu_name (leader->pmu_name == evsel->pmu_name). If we use "perf stat -M LLC_MISSES.PCIE_WRITE -a" on cascadelakex, the event list is: evsel->name evsel->pmu_name --------------------------------------------------------------- unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_4 (as leader) unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_2 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_0 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_5 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_3 unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_1 unc_iio_data_req_of_cpu.mem_write.part1 uncore_iio_4 ...... For the event "unc_iio_data_req_of_cpu.mem_write.part1" with "uncore_iio_4", it should be the event from PMU "uncore_iio_4". It's not a new leader for this PMU. But if we use "(leader->pmu_name == evsel->pmu_name)", the check would be failed and the event is stored to leaders[] as a new PMU leader. So this patch uses strcmp to compare the PMU name between events. Fixes: d4953f7e ("perf parse-events: Fix 3 use after frees found with clang ASAN") Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200430003618.17002-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Hou Tao authored
[ Upstream commit c16f39d1 ] When CONFIG_MTD_UBI_FASTMAP is enabled, fm_anchor will be assigned a free PEB during ubi_wl_init() or ubi_update_fastmap(). However if fastmap is not used or disabled on the MTD device, ubi_wl_entry related with the PEB will not be freed during detach. So Fix it by freeing the unused fastmap anchor during detach. Fixes: f9c34bb5 ("ubi: Fix producing anchor PEBs") Reported-by: syzbot+f317896aae32eb281a58@syzkaller.appspotmail.com Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit fa91e4aa ] [BUG] When running tests like generic/013 on test device with btrfs quota enabled, it can normally lead to data leak, detected at unmount time: BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096 ------------[ cut here ]------------ WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs] RIP: 0010:close_ctree+0x1dc/0x323 [btrfs] Call Trace: btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace caf08beafeca2392 ]--- BTRFS error (device dm-3): qgroup reserved space leaked [CAUSE] In the offending case, the offending operations are: 2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0 2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0 The following sequence of events could happen after the writev(): CPU1 (writeback) | CPU2 (truncate) ----------------------------------------------------------------- btrfs_writepages() | |- extent_write_cache_pages() | |- Got page for 1003520 | | 1003520 is Dirty, no writeback | | So (!clear_page_dirty_for_io()) | | gets called for it | |- Now page 1003520 is Clean. | | | btrfs_setattr() | | |- btrfs_setsize() | | |- truncate_setsize() | | New i_size is 18388 |- __extent_writepage() | | |- page_offset() > i_size | |- btrfs_invalidatepage() | |- Page is clean, so no qgroup | callback executed This means, the qgroup reserved data space is not properly released in btrfs_invalidatepage() as the page is Clean. [FIX] Instead of checking the dirty bit of a page, call btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage(). As qgroup rsv are completely bound to the QGROUP_RESERVED bit of io_tree, not bound to page status, thus we won't cause double freeing anyway. Fixes: 0b34c261 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero") CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Zeng Tao authored
[ Upstream commit b872d064 ] The vfio_pci_release call will free and clear the error and request eventfd ctx while these ctx could be in use at the same time in the function like vfio_pci_request, and it's expected to protect them under the vdev->igate mutex, which is missing in vfio_pci_release. This issue is introduced since commit 1518ac27 ("vfio/pci: fix memory leaks of eventfd ctx"),and since commit 5c5866c5 ("vfio/pci: Clear error and request eventfd ctx after releasing"), it's very easily to trigger the kernel panic like this: [ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 9513.913091] Mem abort info: [ 9513.915871] ESR = 0x96000006 [ 9513.918912] EC = 0x25: DABT (current EL), IL = 32 bits [ 9513.924198] SET = 0, FnV = 0 [ 9513.927238] EA = 0, S1PTW = 0 [ 9513.930364] Data abort info: [ 9513.933231] ISV = 0, ISS = 0x00000006 [ 9513.937048] CM = 0, WnR = 0 [ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000 [ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000 [ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci] [ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G W 5.8.0-rc4+ #3 [ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020 [ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88 [ 9513.999515] lr : eventfd_signal+0x6c/0x1b0 [ 9514.003591] sp : ffff800038a0b960 [ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10 [ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000 [ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400 [ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008 [ 9514.028033] x21: 0000000000000000 x20: 0000000000000000 [ 9514.033321] x19: 0000000000000008 x18: 0000000000000000 [ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328 [ 9514.043893] x15: 0000000000000000 x14: 0000000000000001 [ 9514.049179] x13: 0000000000000000 x12: 0000000000000002 [ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00 [ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60 [ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748 [ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000 [ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001 [ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000 [ 9514.086181] Call trace: [ 9514.088618] _raw_spin_lock_irqsave+0x48/0x88 [ 9514.092954] eventfd_signal+0x6c/0x1b0 [ 9514.096691] vfio_pci_request+0x84/0xd0 [vfio_pci] [ 9514.101464] vfio_del_group_dev+0x150/0x290 [vfio] [ 9514.106234] vfio_pci_remove+0x30/0x128 [vfio_pci] [ 9514.111007] pci_device_remove+0x48/0x108 [ 9514.115001] device_release_driver_internal+0x100/0x1b8 [ 9514.120200] device_release_driver+0x28/0x38 [ 9514.124452] pci_stop_bus_device+0x68/0xa8 [ 9514.128528] pci_stop_and_remove_bus_device+0x20/0x38 [ 9514.133557] pci_iov_remove_virtfn+0xb4/0x128 [ 9514.137893] sriov_disable+0x3c/0x108 [ 9514.141538] pci_disable_sriov+0x28/0x38 [ 9514.145445] hns3_pci_sriov_configure+0x48/0xb8 [hns3] [ 9514.150558] sriov_numvfs_store+0x110/0x198 [ 9514.154724] dev_attr_store+0x44/0x60 [ 9514.158373] sysfs_kf_write+0x5c/0x78 [ 9514.162018] kernfs_fop_write+0x104/0x210 [ 9514.166010] __vfs_write+0x48/0x90 [ 9514.169395] vfs_write+0xbc/0x1c0 [ 9514.172694] ksys_write+0x74/0x100 [ 9514.176079] __arm64_sys_write+0x24/0x30 [ 9514.179987] el0_svc_common.constprop.4+0x110/0x200 [ 9514.184842] do_el0_svc+0x34/0x98 [ 9514.188144] el0_svc+0x14/0x40 [ 9514.191185] el0_sync_handler+0xb0/0x2d0 [ 9514.195088] el0_sync+0x140/0x180 [ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61) [ 9514.204455] ---[ end trace 648de00c8406465f ]--- [ 9514.212308] note: bash[1327] exited with preempt_count 1 Cc: Qian Cai <cai@lca.pw> Cc: Alex Williamson <alex.williamson@redhat.com> Fixes: 1518ac27 ("vfio/pci: fix memory leaks of eventfd ctx") Signed-off-by:
Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit a61fa279 ] Clear the weird flags before logging to improve strace output -- logging results while, say, TF is set does no one any favors. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/907bfa5a42d4475b8245e18b67a04b13ca51ffdb.1593191971.git.luto@kernel.orgSigned-off-by:
-
Javed Hasan authored
[ Upstream commit 823a6540 ] When an rport event (RPORT_EV_READY) is updated without work being queued, avoid taking an additional reference. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count gets incremented by 1. kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in INIT state kernel: host0: rport fffce5: Port is Ready kernel: host0: rport fffce5: Received PRLI request while in state Ready kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host0: rport fffce5: Received LOGO request while in state Ready kernel: host0: rport fffce5: Delete port kernel: host0: rport fffce5: Received PLOGI request kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy kernel: host0: rport fffce5: work event 3 kernel: host0: rport fffce5: lld callback ev 3 kernel: host0: rport fffce5: work delete Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.comReviewed-by:
Girish Basrur <gbasrur@marvell.com> Reviewed-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Javed Hasan authored
[ Upstream commit 71f2bf85 ] Handling of extra kref which is done by lookup table in case rdata is already present in list. This issue was leading to memory leak. Trace from KMEMLEAK tool: unreferenced object 0xffff8888259e8780 (size 512): comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s) hex dump (first 32 bytes): 58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00 01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10 backtrace: [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc] [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc] [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc] [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf] [<00000000e0eb6893>] process_one_work+0x382/0x6c0 [<000000002dfd9e21>] worker_thread+0x57/0x5c0 [<00000000b648204f>] kthread+0x1a0/0x1c0 [<0000000072f5ab20>] ret_from_fork+0x35/0x40 [<000000001d5c05d8>] 0xffffffffffffffff Below is the log sequence which leads to memory leak. Here we get the nested "Received PLOGI request" for same port and this request leads to call the fc_rport_create() twice for the same rport. kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in INIT state kernel: host1: rport fffce5: Port is Ready kernel: host1: rport fffce5: Received PRLI request while in state Ready kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0 kernel: host1: rport fffce5: Received LOGO request while in state Ready kernel: host1: rport fffce5: Delete port kernel: host1: rport fffce5: Received PLOGI request kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.comReviewed-by:
-
Sagi Grimberg authored
[ Upstream commit 3b4b1972 ] Revert fab7772b ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") When adding a new namespace to the head disk (via nvme_mpath_set_live) we will see partition scan which triggers I/O on the mpath device node. This process will usually be triggered from the scan_work which holds the scan_lock. If I/O blocks (if we got ana change currently have only available paths but none are accessible) this can deadlock on the head disk bd_mutex as both partition scan I/O takes it, and head disk revalidation takes it to check for resize (also triggered from scan_work on a different path). See trace [1]. The mpath disk revalidation was originally added to detect online disk size change, but this is no longer needed since commit cb224c3a ("nvme: Convert to use set_capacity_revalidate_and_notify") which already updates resize info without unnecessarily revalidating the disk (the mpath disk doesn't even implement .revalidate_disk fop). [1]: -- kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:9 D 0 494 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: revalidate_disk+0x63/0xa0 kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core] kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core] kernel: ? evict+0x14c/0x1b0 kernel: revalidate_disk+0x2b/0xa0 kernel: nvme_validate_ns+0x49/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 ... kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:1 D 0 2630 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? file_fdatawait_range+0x30/0x30 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: ? kmem_cache_alloc_trace+0x19c/0x230 kernel: efi_partition+0x1e6/0x708 kernel: ? vsnprintf+0x39e/0x4e0 kernel: ? snprintf+0x49/0x60 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 -- Fixes: fab7772b ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Zhang Xiaoxu authored
[ Upstream commit 95a3d8f3 ] When xfstests generic/451, there is an BUG at mm/memcontrol.c: page:ffffea000560f2c0 refcount:2 mapcount:0 mapping:000000008544e0ea index:0xf mapping->aops:cifs_addr_ops dentry name:"tst-aio-dio-cycle-write.451" flags: 0x2fffff80000001(locked) raw: 002fffff80000001 ffffc90002023c50 ffffea0005280088 ffff88815cda0210 raw: 000000000000000f 0000000000000000 00000002ffffffff ffff88817287d000 page dumped because: VM_BUG_ON_PAGE(page->mem_cgroup) page->mem_cgroup:ffff88817287d000 ------------[ cut here ]------------ kernel BUG at mm/memcontrol.c:2659! invalid opcode: 0000 [#1] SMP CPU: 2 PID: 2038 Comm: xfs_io Not tainted 5.8.0-rc1 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_ 073836-buildvm-ppc64le-16.ppc.4 RIP: 0010:commit_charge+0x35/0x50 Code: 0d 48 83 05 54 b2 02 05 01 48 89 77 38 c3 48 c7 c6 78 4a ea ba 48 83 05 38 b2 02 05 01 e8 63 0d9 RSP: 0018:ffffc90002023a50 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88817287d000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88817ac97ea0 RDI: ffff88817ac97ea0 RBP: ffffea000560f2c0 R08: 0000000000000203 R09: 0000000000000005 R10: 0000000000000030 R11: ffffc900020237a8 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: ffff88815a1272c0 FS: 00007f5071ab0800(0000) GS:ffff88817ac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055efcd5ca000 CR3: 000000015d312000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mem_cgroup_charge+0x166/0x4f0 __add_to_page_cache_locked+0x4a9/0x710 add_to_page_cache_locked+0x15/0x20 cifs_readpages+0x217/0x1270 read_pages+0x29a/0x670 page_cache_readahead_unbounded+0x24f/0x390 __do_page_cache_readahead+0x3f/0x60 ondemand_readahead+0x1f1/0x470 page_cache_async_readahead+0x14c/0x170 generic_file_buffered_read+0x5df/0x1100 generic_file_read_iter+0x10c/0x1d0 cifs_strict_readv+0x139/0x170 new_sync_read+0x164/0x250 __vfs_read+0x39/0x60 vfs_read+0xb5/0x1e0 ksys_pread64+0x85/0xf0 __x64_sys_pread64+0x22/0x30 do_syscall_64+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5071fcb1af Code: Bad RIP value. RSP: 002b:00007ffde2cdb8e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 00007ffde2cdb990 RCX: 00007f5071fcb1af RDX: 0000000000001000 RSI: 000055efcd5ca000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000001000 R11: 0000000000000293 R12: 0000000000000001 R13: 000000000009f000 R14: 0000000000000000 R15: 0000000000001000 Modules linked in: ---[ end trace 725fa14a3e1af65c ]--- Since commit 3fea5a49 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API") not cancel the page charge, the pages maybe double add to pagecache: thread1 | thread2 cifs_readpages readpages_get_pages add_to_page_cache_locked(head,index=n)=0 | readpages_get_pages | add_to_page_cache_locked(head,index=n+1)=0 add_to_page_cache_locked(head, index=n+1)=-EEXIST then, will next loop with list head page's index=n+1 and the page->mapping not NULL readpages_get_pages add_to_page_cache_locked(head, index=n+1) commit_charge VM_BUG_ON_PAGE So, we should not do the next loop when any page add to page cache failed. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Acked-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Alex Williamson authored
[ Upstream commit 5c5866c5 ] The next use of the device will generate an underflow from the stale reference. Cc: Qian Cai <cai@lca.pw> Fixes: 1518ac27 ("vfio/pci: fix memory leaks of eventfd ctx") Reported-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Tested-by:
-
Thomas Gleixner authored
[ Upstream commit a7ef9ba9 ] Prevent the compiler from uninlining and creating traceable/probable functions as this is invoked _after_ context tracking switched to CONTEXT_USER and rcu idle. Signed-off-by:
Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by:
-
Boris Brezillon authored
[ Upstream commit eb13fa02 ] Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Ron Minnich <rminnich@google.com> Tested-by:
-
Madhuparna Bhowmik authored
[ Upstream commit e1c3cdb2 ] Fields of md(mport_dev) are set after cdev_device_add(). However, the file operation callbacks can be called after cdev_device_add() and therefore accesses to fields of md in the callbacks can race with the rest of the mport_cdev_add() function. One such example is INIT_LIST_HEAD(&md->portwrites) in mport_cdev_add(), the list is initialised after cdev_device_add(). This can race with list_add_tail(&pw_filter->md_node,&md->portwrites) in rio_mport_add_pw_filter() which is called by unlocked_ioctl. To avoid such data races use cdev_device_add() after initializing md. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mike Marshall <hubcap@omnibond.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Pavel Andrianov <andrianov@ispras.ru> Link: http://lkml.kernel.org/r/20200426112950.1803-1-madhuparnabhowmik10@gmail.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Qian Cai authored
[ Upstream commit d6c1f098 ] "prev_offset" is a static variable in swapin_nr_pages() that can be accessed concurrently with only mmap_sem held in read mode as noticed by KCSAN, BUG: KCSAN: data-race in swap_cluster_readahead / swap_cluster_readahead write to 0xffffffff92763830 of 8 bytes by task 14795 on cpu 17: swap_cluster_readahead+0x2a6/0x5e0 swapin_readahead+0x92/0x8dc do_swap_page+0x49b/0xf20 __handle_mm_fault+0xcfb/0xd70 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x715 page_fault+0x34/0x40 1 lock held by (dnf)/14795: #0: ffff897bd2e98858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715 do_user_addr_fault at arch/x86/mm/fault.c:1405 (inlined by) do_page_fault at arch/x86/mm/fault.c:1535 irq event stamp: 83493 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x365/0x589 irq_exit+0xa2/0xc0 read to 0xffffffff92763830 of 8 bytes by task 1 on cpu 22: swap_cluster_readahead+0xfd/0x5e0 swapin_readahead+0x92/0x8dc do_swap_page+0x49b/0xf20 __handle_mm_fault+0xcfb/0xd70 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x715 page_fault+0x34/0x40 1 lock held by systemd/1: #0: ffff897c38f14858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715 irq event stamp: 43530289 count_memcg_event_mm+0x1a6/0x270 count_memcg_event_mm+0x119/0x270 __do_softirq+0x365/0x589 irq_exit+0xa2/0xc0 Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit dc3da046 ] Nothing ensures that session will still be valid by the time we dereference the pointer. Take and put a reference. In principle, we should always be able to get a reference here, but throw a warning if that's ever not the case. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit fcee90cd ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Also, call pm_runtime_disable() when pm_runtime_get_sync() returns an error code. Link: https://lore.kernel.org/r/20200521024709.2368-1-dinghao.liu@zju.edu.cnSigned-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 37f72121 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522104008.28340-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Dinghao Liu authored
[ Upstream commit 282a04bf ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200520124649.10848-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Dinghao Liu authored
[ Upstream commit 9604617e ] There are two error handling paths in this functon. When wlcore_tx_work_locked() returns an error code, we should decrease the runtime PM usage counter the same way as the error handling path beginning from pm_runtime_get_sync(). Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 65bd91dd ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 61f82e3f ] In the absence of any modules, no "modules" map is created, but there are other executable pages to map, due to eBPF JIT, kprobe or ftrace. Map them by recognizing that the first "module" symbol is not necessarily from a module, and adjust the map accordingly. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200512121922.8997-10-adrian.hunter@intel.comSigned-off-by:
-
Ian Rogers authored
[ Upstream commit a159e2fe ] Avoid a simple memory leak. Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200508053629.210324-10-irogers@google.comSigned-off-by:
-
Xie XiuQi authored
[ Upstream commit 07e9a6f5 ] Need to free "str" before return when asprintf() failed to avoid memory leak. Signed-off-by:
Xie XiuQi <xiexiuqi@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hongbo Yao <yaohongbo@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.comSigned-off-by:
-
Jiri Olsa authored
[ Upstream commit ea9eb1f4 ] Joakim reported wrong duration_time value for interval bigger than 4000 [1]. The problem is in the interval value we pass to update_stats function, which is typed as 'unsigned int' and overflows when we get over 2^32 (happens between intervals 4000 and 5000). Retyping the passed value to unsigned long long. [1] https://www.spinics.net/lists/linux-perf-users/msg11777.html Fixes: b90f1333 ("perf stat: Update walltime_nsecs_stats in interval mode") Reported-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200518131445.3745083-1-jolsa@kernel.orgSigned-off-by:
-
Ian Rogers authored
[ Upstream commit 7597ce89 ] Make the architecture test directory agree with the code comment. Committer notes: This was split from a larger patch. The code was assuming the developer always worked from tools/perf/, so make sure we do the test -d having $toolsdir/perf/arch/$arch, to match the intent expressed in the comment, just above that loop. Signed-off-by:
-
Ian Rogers authored
[ Upstream commit 3efc899d ] If allocated, perf_pkg_mask and metric_events need freeing. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200512235918.10732-1-irogers@google.comSigned-off-by:
-
Qian Cai authored
[ Upstream commit 1518ac27 ] Finished a qemu-kvm (-device vfio-pci,host=0001:01:00.0) triggers a few memory leaks after a while because vfio_pci_set_ctx_trigger_single() calls eventfd_ctx_fdget() without the matching eventfd_ctx_put() later. Fix it by calling eventfd_ctx_put() for those memory in vfio_pci_release() before vfio_device_release(). unreferenced object 0xebff008981cc2b00 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994816 (age 9796.310s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180 unreferenced object 0x29ff008981cc4180 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994818 (age 9796.290s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180 Signed-off-by:
-
David Sterba authored
[ Upstream commit 7c09c030 ] Deleting a subvolume on a full filesystem leads to ENOSPC followed by a forced read-only. This is not a transaction abort and the filesystem is otherwise ok, so the error should be just propagated to the callers. This is caused by unnecessary call to btrfs_handle_fs_error for all errors, except EAGAIN. This does not make sense as the standard transaction abort mechanism is in btrfs_drop_snapshot so all relevant failures are handled. Originally in commit cb1b69f4 ("Btrfs: forced readonly when btrfs_drop_snapshot() fails") there was no return value at all, so the btrfs_std_error made some sense but once the error handling and propagation has been implemented we don't need it anymore. Signed-off-by:
-
Yu Chen authored
[ Upstream commit 1c0e69ae ] If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk for function, as suspend_clk is slow so EP command need more time to complete, e.g, imx8M suspend_clk is 32K, set ep configuration will take about 380us per below trace time stamp(44.286278 - 44.285897 = 0.000381): configfs_acm.sh-822 [000] d..1 44.285896: dwc3_writel: addr 000000006d59aae1 value 00000401 configfs_acm.sh-822 [000] d..1 44.285897: dwc3_readl: addr 000000006d59aae1 value 00000401 ... ... configfs_acm.sh-822 [000] d..1 44.286278: dwc3_readl: addr 000000006d59aae1 value 00000001 configfs_acm.sh-822 [000] d..1 44.286279: dwc3_gadget_ep_cmd: ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000 00000500 00000000 --> status: Successful This was originally found on Hisilicon Kirin Soc that need more time for the device controller to clear the CmdAct of DEPCMD. Signed-off-by:
Yu Chen <chenyu56@huawei.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Shreyas Joshi authored
[ Upstream commit 48021f98 ] If uboot passes a blank string to console_setup then it results in a trashed memory. Ultimately, the kernel crashes during freeing up the memory. This fix checks if there is a blank parameter being passed to console_setup from uboot. In case it detects that the console parameter is blank then it doesn't setup the serial device and it gracefully exits. Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.comSigned-off-by:
Shreyas Joshi <shreyas.joshi@biamp.com> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.] Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit dc455f4c ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit d7372dfb ] pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
