- 10 Oct, 2007 40 commits
-
-
Stephen Hemminger authored
This patch converts the messy macro for MASK_PFX to inline function and expands TKEY_GET_MASK in the one place it is used. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Try this out: * replace macro's with inlines * get rid of places doing multiple evaluations of NODE_PARENT [akpm@linux-foundation.org: rcu_dereference wants an lval] Signed-off-by: -
Ilpo Järvinen authored
This stale info came from the original idea, which proved to be unnecessarily complex, sacked_out > 0 is easy to do and that when it's going to be needed anyway (it _can_ be valid also when sacked_out == 0 but there's not going to be a guarantee about it for now). Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
Previously code had IsReno/IsFack defined as macros that were local to tcp_input.c though sack_ok field has user elsewhere too for the same purpose. This changes them to static inlines as preferred according the current coding style and unifies the access to sack_ok across multiple files. Magic bitops of sack_ok for FACK and DSACK are also abstracted to functions with appropriate names. Note: - One sack_ok = 1 remains but that's self explanary, i.e., it enables sack - Couple of !IsReno cases are changed to tcp_is_sack - There were no users for IsDSack => I dropped it Signed-off-by:
-
Ilpo Järvinen authored
BUG_ON is an overkill. In fact, I was mislead by BUG_TRAP severity (equals to WARN_ON) which is much lower than BUG_ON's (that panics). Signed-off-by:
-
Ilpo Järvinen authored
Previously TCP had a transitional state during which reno counted segments that are already below the current window into sacked_out, which is now prevented. In addition, re-try now the unconditional S+L skb catching. This approach conservatively calls just remove_sack and leaves reset_sack() calls alone. The best solution to the whole problem would be to first calculate the new sacked_out fully (this patch does not move reno_sack_reset calls from original sites and thus does not implement this). However, that would require very invasive change to fastretrans_alert (perhaps even slicing it to two halves). Alternatively, all callers of tcp_packets_in_flight (i.e., users that depend on sacked_out) should be postponed until the new sacked_out has been calculated but it isn't any simpler alternative. Signed-off-by:
-
Ilpo Järvinen authored
This happens rather infrequently and is only possible during FRTO. We must not allow TCP to slip to Open state because tcp_fastretrans_alert might then not be called on it's time when FRTO has exited. This become a problem when left_out got removed and was replaced by just sacked_out. Signed-off-by:
-
Ilpo Järvinen authored
tcp_verify_left_out is useful for verifying S+L condition, so add it back to couple of places in where the code was not calling to tcp_sync_left_out but used own ad-hoc solution (before the tcp_sync_left_out got removed). Signed-off-by:
-
Ilpo Järvinen authored
Left_out was dropped a while ago, thus leaving verifying consistency of the "left out" as only task for the function in question. Thus make it's name more appropriate. In addition, it is intentionally converted to #define instead of static inline because the location of the invariant failure is the most important thing to have if this ever triggers. I think it would have been helpful e.g. in this case where the location of the failure point had to be based on some quesswork: http://lkml.org/lkml/2007/5/2/464 ...Luckily the guesswork seems to have proved to be correct. Signed-off-by: -
Ilpo Järvinen authored
tp->left_out got removed but nothing came to replace it back then (users just did addition by themselves), so add function for users now. Signed-off-by:
-
Ilpo Järvinen authored
It is easily calculable when needed and user are not that many after all. Signed-off-by:
-
Ilpo Järvinen authored
There is no need for such check in pkts_acked because the callback is not invoked unless at least one segment got fully ACKed (i.e., the snd_una moved past skb's end_seq) by the cumulative ACK's snd_una advancement. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
No other users exist for tcp_ecn.h. Very few things remain in tcp.h, for most TCP ECN functions callers reside within a single .c file and can be placed there. Signed-off-by:
-
Ilpo Järvinen authored
In addition, added a reference about the purpose of the loop. Signed-off-by:
-
Ilpo Järvinen authored
F-RTO does not touch SACKED_ACKED bits at all, so there is no need to recount them in tcp_enter_frto_loss. After removal of the else branch, nested ifs can be combined. This must also reset sacked_out when SACK is not in use as TCP could have received some duplicate ACKs prior RTO. To achieve that in a sane manner, tcp_reset_reno_sack was re-placed by the previous patch. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Ilpo Järvinen authored
Stupid error from my side. Even though now that I noticed this, I hoped it would have been an optimization but no, the counter hint is then incorrect. Thus clearing is necessary for now (I still suspect though that this path is never executed). Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
It is guaranteed to be valid only when !tp->sacked_out. In most cases this seqno is available in the last ACK but there is no guarantee for that. The new fast recovery loss marking algorithm needs this as entry point. Signed-off-by:
-
Thomas Graf authored
Currently neighbour event notifications are limited to update notifications and only sent if the ARP daemon is enabled. This patch extends the existing notification code by also reporting neighbours being removed due to gc or administratively and removes the dependency on the ARP daemon. This allows to keep track of neighbour states without periodically fetching the complete neighbour table. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Thomas Graf authored
Introduces neigh_cleanup_and_release() to be used after a neighbour has been removed from its neighbour table. Serves as preparation to add event notifications. Signed-off-by:
-
Andrew Gallatin authored
Singed off by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: -
Jan-Bernd Themann authored
Signed-off-by:
Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by:
-
Jan-Bernd Themann authored
This patch provides generic Large Receive Offload (LRO) functionality for IPv4/TCP traffic. LRO combines received tcp packets to a single larger tcp packet and passes them then to the network stack in order to increase performance (throughput). The interface supports two modes: Drivers can either pass SKBs or fragment lists to the LRO engine. Signed-off-by:
-
Pavel Emelyanov authored
Veth stands for Virtual ETHernet. It is a simple tunnel driver that works at the link layer and looks like a pair of ethernet devices interconnected with each other. Mainly it allows to communicate between network namespaces but it can be used as is as well. The newlink callback is organized that way to make it easy to create the peer device in the separate namespace when we have them in kernel. This implementation uses another interface - the RTM_NRELINK message introduced by Patric. Bug fixes from Daniel Lezcano. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Pavel Emelianov authored
This routine gets the parsed rtnl attributes and creates a new link with generic info (IFLA_LINKINFO policy). Its intention is to help the drivers, that need to create several links at once (like VETH). This is nothing but a copy-paste-ed part of rtnl_newlink() function that is responsible for creation of new device. Signed-off-by:
-
Stephen Hemminger authored
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Johannes Berg authored
This makes the radiotap parser accept all other fields that are currently defined. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
The wireless extensions ioctl's implemented in mac80211 do not include SIOCGIWTXPOWER. This patch adds the necessary code. Acked-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Thomas Graf authored
Makes use of the type safe netlink interface and adds a warning if the message is too big for NLMSG_DEFAULT_SIZE to help debug. Signed-off-by:
-
Johannes Berg authored
This makes it behave the same whether we have monitor during operation or not. Signed-off-by:
Jiri Benc <jbenc@suse.cz> Signed-off-by:
-
Andy Green authored
Michael Wu noticed that the skb length checking is not taken care of enough when a packet is presented on the Monitor interface for injection. This patch improves the sanity checking and removes fake offsets placed into the skb network and transport header. Signed-off-by:
Andy Green <andy@warmcat.com> Signed-off-by:
-
Andy Green authored
ieee80211_get_radiotap_len() tries to dereference radiotap length without taking care that it is completely unaligned and get_unaligned() is required. Signed-off-by:
-
Michael Wu authored
This patch replaces atomic allocations with regular ones where possible. Merged with "revert some GFP_ATOMIC -> GFP_KERNEL changes" from Michael Wu: > Some of the allocations made with GFP_ATOMIC really were necessary. Signed-off-by:
Michael Wu <flamingice@sourmilk.net> Signed-off-by:
-
Daniel Drake authored
zd1211rw and bcm43xx are interested in being notified when ERP IE conditions change, so that they can reprogram a register which affects how control frames are transmitted. This patch adds an interface similar to the one that can be found in softmac. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Daniel Drake authored
Similarly to CTS protection, whether short preambles are used for 802.11b transmissions should be a per-subif setting, not device global. For STAs, this patch makes short preamble handling automatic based on the ERP IE. For APs, hostapd still uses the prism ioctls, but the write ioctl has been restricted to AP-only subifs. ieee80211_txrx_data.short_preamble (an unused field) was removed. Unfortunately, some API changes were required for the following functions: - ieee80211_generic_frame_duration - ieee80211_rts_duration - ieee80211_ctstoself_duration - ieee80211_rts_get - ieee80211_ctstoself_get Affected drivers were updated accordingly. Signed-off-by:
-
Ivo van Doorn authored
mac80211 informs the driver what the short and long retry values are through set_retry_limit(), but when packets are being transmitted it did not inform the driver which of the 2 retry limits should actually be used. Instead it sends the actual value, but for drivers that can only set the retry limit and the register and in the descriptor need to indicate which of the limits should be used this is not really useful. This patch will add a IEEE80211_TXCTL_LONG_RETRY_LIMIT flag to the ieee80211_tx_control structure. By default the short retry limit should be used but if the flag is set the long retry should be used. This does not prevent the driver to ignore the request for "no retry" packets, but at least those will be send out with the short retry limit. But there is no perfect cure for this problem.. :( Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Daniel Drake authored
My cheapy D-Link AP behaves strangely w.r.t reassociations. The following sequence of commands causes me to lose association and to be unable to regain it: ifconfig eth8 down ifconfig eth8 up iwconfig eth8 essid <x> This is because mac80211 tries to reassociate, rather than just associate. My AP replies with an association response (not a reassociation response...) denying the association with code 12: "Association denied due to reason outside the scope of this standard" mac80211 tries this reassociation another 4 times or so before finally giving up. I see 2 problems here: 1. bringing the interface down and up again should be resetting interface state i.e. after the interface is brought down, it should have no memory of if or where it was previously associated 2. after the first reassociation fails, mac80211 should fall back to standard association for the next attempt Signed-off-by:
-
