This eliminates the workaround that requires disabling
-mprofile-kernel by default in Kconfig.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

It would be nice if the source code is written in the same style.
This proposes the convention for describing the compiler capability
in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We have enabled GCC_PLUGINS for COMPILE_TEST, but allmodconfig now
produces new warnings.

  CC [M]  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.o
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_workarounds_nphy_rev7’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:16563:1: warning: the frame size of 3128 bytes is larger than 2048 bytes [-Wframe-larger-than=]
 }
 ^
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_workarounds_nphy_rev3’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:16905:1: warning: the frame size of 2800 bytes is larger than 2048 bytes [-Wframe-larger-than=]
 }
 ^
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_cal_txiqlo_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:26033:1: warning: the frame size of 2488 bytes is larger than 2048 bytes [-Wframe-larger-than=]
 }
 ^

It looks like GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is causing this.
Add "depends on !COMPILE_TEST" to not dirturb the compile test.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Now that the compiler's plugin support is checked in Kconfig,
all{yes,mod}config will not be bothered.

Remove 'depends on !COMPILE_TEST' for GCC_PLUGINS.

'depends on !COMPILE_TEST' for the following three are still kept:
  GCC_PLUGIN_CYC_COMPLEXITY
  GCC_PLUGIN_STRUCTLEAK_VERBOSE
  GCC_PLUGIN_RANDSTRUCT_PERFORMANCE

Kees suggested to do so because the first two are too noisy, and the
last one would reduce the compile test coverage.  I commented the
reasons in arch/Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>

Run scripts/gcc-plugin.sh from Kconfig so that users can enable
GCC_PLUGINS only when the compiler supports building plugins.

Kconfig defines a new symbol, PLUGIN_HOSTCC.  This will contain
the compiler (g++ or gcc) used for building plugins, or empty
if the plugin can not be supported at all.

This allows us to remove all ugly testing in Makefile.gcc-plugins.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>

For PowerPC, GCC 5.2 is the requirement for GCC plugins.  Move the
version check to Kconfig so that the GCC plugin menus will be hidden
if an older compiler is in use.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency.  Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS.  This could cause the unmet direct
dependency.

Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.

There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins.  Hence, the correct
dependency for KCOV is:

  depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS

You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc.  Hence, the select should be:

  select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC

With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.

I also cleaned up Kconfig and scripts/Makefile.kcov as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

CONFIG_GCOV_FORMAT_AUTODETECT compiles either gcc_3_4.c or gcc_4_7.c
according to your GCC version.

We can achieve the equivalent behavior by setting reasonable dependency
with the knowledge of the compiler version.

If GCC older than 4.7 is used, GCOV_FORMAT_3_4 is the default, but users
are still allowed to select GCOV_FORMAT_4_7 in case the newer format is
back-ported.

On the other hand, If GCC 4.7 or newer is used, there is no reason to
use GCOV_FORMAT_3_4, so it should be hidden.

If you downgrade the compiler to GCC 4.7 or older, oldconfig/syncconfig
will display a prompt for the choice because GCOV_FORMAT_3_4 becomes
visible as a new symbol.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

This becomes much neater in Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

This will be useful to describe the clang version dependency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

This will be useful to specify the required compiler version,
like this:

config FOO
        bool "Use Foo"
        depends on GCC_VERSION >= 40800
        help
          This feature requires GCC 4.8 or newer.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

Move the test for -fstack-protector(-strong) option to Kconfig.

If the compiler does not support the option, the corresponding menu
is automatically hidden.  If STRONG is not supported, it will fall
back to REGULAR.  If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.

I also turned the 'choice' into only two boolean symbols.  The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.

X86 has additional shell scripts in case the compiler supports those
options, but generates broken code.  I added CC_HAS_SANE_STACKPROTECTOR
to test this.  I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>

Commit 21c54b77 ("kconfig: show compiler version text in the top
comment") was intended to detect the compiler upgrade, but Geert
reported a breakage on the m68k build.

The compiler upgrade is detected by the change of the environment
variable, CC_VERSION_TEXT, which contains the first line of the output
from $(CC) --version.  Currently, this works well when CROSS_COMPILE
is given via the environment variable or the Make command line.

However, some architectures such as m68k can specify CROSS_COMPILE
from arch/$(SRCARCH)/Makefile as well.  In this case, "make ARCH=m68k"
ends up with endless syncconfig loop.

  $ make ARCH=m68k defconfig
  *** Default configuration is based on 'multi_defconfig'
  #
  # configuration written to .config
  #
  $ make ARCH=m68k
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig

Things are happening like this:

Because arch/$(SRCARCH)/Makefile is included after CC_VERSION_TEXT
is set, it contains the host compiler version in the defconfig phase.

To create or update auto.conf, the following line is triggered:

include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
        $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig

This recurses the top Makefile after arch/$(SRCARCH)/Makefile is
included.  CROSS_COMPILE is set to a m68k toolchain prefix and
exported to the recursed Make.  Then, syncconfig is invoked with
the target compiler version in CC_VERSION_TEXT.

The Make will restart because auto.conf and auto.conf.cmd have been
updated.  At this point, CROSS_COMPILE is reset, so CC_VERSION_TEXT
is set to the host compiler version again.  Then, syncconfig is
triggered due to the change of CC_VERSION_TEXT.  This loop continues
eternally.

To fix this problem, $(CC_VERSION_TEXT) must be evaluated only after
arch/$(SRCARCH)/Makefile.  Setting it earlier is OK as long as it is
defined by using the '=' operator instead of ':='.

For the defconfig phase, $(CC_VERSION_TEXT) is evaluated when Kbuild
descends into scripts/kconfig/, so it contains the target compiler
version correctly.

include/config/auto.conf.cmd references $(CC_VERSION_TEXT) as well,
so it must be included after arch/$(SRCARCH)/Makefile.

Fixes: 21c54b77 ("kconfig: show compiler version text in the top comment")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Support for split PMD page table lock on 64-bit Book3S (Power8/9).

   - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
     live patching again.

   - Add support for patching barrier_nospec in copy_from_user() and
     syscall entry.

   - A couple of fixes for our data breakpoints on Book3S.

   - A series from Nick optimising TLB/mm handling with the Radix MMU.

   - Numerous small cleanups to squash sparse/gcc warnings from Mathieu
     Malaterre.

   - Several series optimising various parts of the 32-bit code from
     Christophe Leroy.

   - Removal of support for two old machines, "SBC834xE" and "C2K"
     ("GEFanuc,C2K"), which is why the diffstat has so many deletions.

  And many other small improvements & fixes.

  There's a few out-of-area changes. Some minor ftrace changes OK'ed by
  Steve, and a fix to our powernv cpuidle driver. Then there's a series
  touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
  around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
  been in next for several weeks.

  Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
  Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
  Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
  Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
  Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
  Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
  Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
  Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
  Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
  Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
  Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
  Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
  Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"

* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
  powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
  cpuidle: powernv: Fix promotion from snooze if next state disabled
  powerpc: fix build failure by disabling attribute-alias warning in pci_32
  ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
  powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
  powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
  powerpc/pkeys: Detach execute_only key on !PROT_EXEC
  powerpc/powernv: copy/paste - Mask SO bit in CR
  powerpc: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove support for Marvell mv64x60 i2c controller
  powerpc/boot: Remove support for Marvell MPSC serial controller
  powerpc/embedded6xx: Remove C2K board support
  powerpc/lib: optimise PPC32 memcmp
  powerpc/lib: optimise 32 bits __clear_user()
  powerpc/time: inline arch_vtime_task_switch()
  powerpc/Makefile: set -mcpu=860 flag for the 8xx
  powerpc: Implement csum_ipv6_magic in assembly
  powerpc/32: Optimise __csum_partial()
  powerpc/lib: Adjust .balign inside string functions for PPC32
  ...

Pull microblaze updates from Michal Simek:

 - Fix simpleImage format generation

 - Remove earlyprintk support and replace it by earlycon

* tag 'microblaze-v4.18-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: dts: replace 'linux,stdout-path' with 'stdout-path'
  microblaze: remove redundant early_printk support
  microblaze: remove unnecessary prom.h includes
  microblaze: Fix simpleImage format generation

Pull udf updates from Jan Kara:
 "UDF support for UTF-16 characters in file names"

* tag 'udf_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Add support for decoding UTF-16 characters
  udf: Add support for encoding UTF-16 characters
  udf: Push sb argument to udf_name_[to|from]_CS0()
  udf: Convert ident strings to proper charset
  udf: Use UTF-32 <-> UTF-8 conversion functions from NLS
  udf: Always require NLS support

Pull orangefs updates from Mike Marshall:
 "Fixes and cleanups:

   - fix some sparse warnings

   - cleanup some code formatting

   - fix up some attribute/meta-data related code"

* tag 'for-linus-4.18-ofs' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: use sparse annotations for holding locks across function calls.
  orangefs: make debug_help_fops static
  orangefs: remove unused function orangefs_get_bufmap_init
  orangefs: specify user pointers when using dev_map_desc and bufmap
  orangefs: formatting cleanups
  orangefs: set i_size on new symlink
  orangefs: report attributes_mask and attributes for statx
  orangefs: make struct orangefs_file_vm_ops static
  orangefs: revamp block sizes

Pull overlayfs fixes from Miklos Szeredi:
 "This contains a fix for the vfs_mkdir() issue discovered by Al, as
  well as other fixes and cleanups"

* tag 'ovl-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: use inode_insert5() to hash a newly created inode
  ovl: Pass argument to ovl_get_inode() in a structure
  vfs: factor out inode_insert5()
  ovl: clean up copy-up error paths
  ovl: return EIO on internal error
  ovl: make ovl_create_real() cope with vfs_mkdir() safely
  ovl: create helper ovl_create_temp()
  ovl: return dentry from ovl_create_real()
  ovl: struct cattr cleanups
  ovl: strip debug argument from ovl_do_ helpers
  ovl: remove WARN_ON() real inode attributes mismatch
  ovl: Kconfig documentation fixes
  ovl: update documentation for unionmount-testsuite

Pull fuse updates from Miklos Szeredi:
 "The most interesting part of this update is user namespace support,
  mostly done by Eric Biederman. This enables safe unprivileged fuse
  mounts within a user namespace.

  There are also a couple of fixes for bugs found by syzbot and
  miscellaneous fixes and cleanups"

* tag 'fuse-update-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: don't keep dead fuse_conn at fuse_fill_super().
  fuse: fix control dir setup and teardown
  fuse: fix congested state leak on aborted connections
  fuse: Allow fully unprivileged mounts
  fuse: Ensure posix acls are translated outside of init_user_ns
  fuse: add writeback documentation
  fuse: honor AT_STATX_FORCE_SYNC
  fuse: honor AT_STATX_DONT_SYNC
  fuse: Restrict allow_other to the superblock's namespace or a descendant
  fuse: Support fuse filesystems outside of init_user_ns
  fuse: Fail all requests with invalid uids or gids
  fuse: Remove the buggy retranslation of pids in fuse_dev_do_read
  fuse: return -ECONNABORTED on /dev/fuse read after abort
  fuse: atomic_o_trunc should truncate pagecache

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

Pull overflow updates from Kees Cook:
 "This adds the new overflow checking helpers and adds them to the
  2-factor argument allocators. And this adds the saturating size
  helpers and does a treewide replacement for the struct_size() usage.
  Additionally this adds the overflow testing modules to make sure
  everything works.

  I'm still working on the treewide replacements for allocators with
  "simple" multiplied arguments:

     *alloc(a * b, ...) -> *alloc_array(a, b, ...)

  and

     *zalloc(a * b, ...) -> *calloc(a, b, ...)

  as well as the more complex cases, but that's separable from this
  portion of the series. I expect to have the rest sent before -rc1
  closes; there are a lot of messy cases to clean up.

  Summary:

   - Introduce arithmetic overflow test helper functions (Rasmus)

   - Use overflow helpers in 2-factor allocators (Kees, Rasmus)

   - Introduce overflow test module (Rasmus, Kees)

   - Introduce saturating size helper functions (Matthew, Kees)

   - Treewide use of struct_size() for allocators (Kees)"

* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Use struct_size() for devm_kmalloc() and friends
  treewide: Use struct_size() for vmalloc()-family
  treewide: Use struct_size() for kmalloc()-family
  device: Use overflow helpers for devm_kmalloc()
  mm: Use overflow helpers in kvmalloc()
  mm: Use overflow helpers in kmalloc_array*()
  test_overflow: Add memory allocation overflow tests
  overflow.h: Add allocation size calculation helpers
  test_overflow: Report test failures
  test_overflow: macrofy some more, do more tests for free
  lib: add runtime test of check_*_overflow functions
  compiler.h: enable builtin overflow checkers and add fallback code

Pull tracing updates from Steven Rostedt:
 "One new feature was added to ftrace, which is the trace_marker now
  supports triggers. For example:

    # cd /sys/kernel/debug/tracing
    # echo 'snapshot' > events/ftrace/print/trigger
    # echo 'cause snapshot' > trace_marker

  The rest of the changes are various clean ups and also one stable fix
  that was added late in the cycle"

* tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits)
  tracing: Use match_string() instead of open coding it in trace_set_options()
  branch-check: fix long->int truncation when profiling branches
  ring-buffer: Fix typo in comment
  ring-buffer: Fix a bunch of typos in comments
  tracing/selftest: Add test to test simple snapshot trigger for trace_marker
  tracing/selftest: Add test to test hist trigger between kernel event and trace_marker
  tracing/selftest: Add selftests to test trace_marker histogram triggers
  ftrace/selftest: Fix reset_trigger() to handle triggers with filters
  ftrace/selftest: Have the reset_trigger code be a bit more careful
  tracing: Document trace_marker triggers
  tracing: Allow histogram triggers to access ftrace internal events
  tracing: Prevent further users of zero size static arrays in trace events
  tracing: Have zero size length in filter logic be full string
  tracing: Add trigger file for trace_markers tracefs/ftrace/print
  tracing: Do not show filter file for ftrace internal events
  tracing: Add brackets in ftrace event dynamic arrays
  tracing: Have event_trace_init() called by trace_init_tracefs()
  tracing: Add __find_event_file() to find event files without restrictions
  tracing: Do not reference event data in post call triggers
  tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
  ...

Pull audit updates from Paul Moore:
 "Another reasonable chunk of audit changes for v4.18, thirteen patches
  in total.

  The thirteen patches can mostly be broken down into one of four
  categories: general bug fixes, accessor functions for audit state
  stored in the task_struct, negative filter matches on executable
  names, and extending the (relatively) new seccomp logging knobs to the
  audit subsystem.

  The main driver for the accessor functions from Richard are the
  changes we're working on to associate audit events with containers,
  but I think they have some standalone value too so I figured it would
  be good to get them in now.

  The seccomp/audit patches from Tyler apply the seccomp logging
  improvements from a few releases ago to audit's seccomp logging;
  starting with this patchset the changes in
  /proc/sys/kernel/seccomp/actions_logged should apply to both the
  standard kernel logging and audit.

  As usual, everything passes the audit-testsuite and it happens to
  merge cleanly with your tree"

[ Heh, except it had trivial merge conflicts with the SELinux tree that
  also came in from Paul   - Linus ]

* tag 'audit-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: Fix wrong task in comparison of session ID
  audit: use existing session info function
  audit: normalize loginuid read access
  audit: use new audit_context access funciton for seccomp_actions_logged
  audit: use inline function to set audit context
  audit: use inline function to get audit context
  audit: convert sessionid unset to a macro
  seccomp: Don't special case audited processes when logging
  seccomp: Audit attempts to modify the actions_logged sysctl
  seccomp: Configurable separator for the actions_logged string
  seccomp: Separate read and write code for actions_logged sysctl
  audit: allow not equal op for audit by executable
  audit: add syscall information to FEATURE_CHANGE records

Pull SELinux updates from Paul Moore:
 "SELinux is back with a quiet pull request for v4.18. Three patches,
  all small: two cleanups of the SELinux audit records, and one to
  migrate to a newly defined type (vm_fault_t).

  Everything passes our test suite, and as of about five minutes ago it
  merged cleanly with your tree"

* tag 'selinux-pr-20180605' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  audit: normalize MAC_POLICY_LOAD record
  audit: normalize MAC_STATUS record
  security: selinux: Change return type to vm_fault_t

Pull security system updates from James Morris:

 - incorporate new socketpair() hook into LSM and wire up the SELinux
   and Smack modules. From David Herrmann:

     "The idea is to allow SO_PEERSEC to be called on AF_UNIX sockets
      created via socketpair(2), and return the same information as if
      you emulated socketpair(2) via a temporary listener socket.

      Right now SO_PEERSEC will return the unlabeled credentials for a
      socketpair, rather than the actual credentials of the creating
      process."

 - remove the unused security_settime LSM hook (Sargun Dhillon).

 - remove some stack allocated arrays from the keys code (Tycho
   Andersen)

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  dh key: get rid of stack allocated array for zeroes
  dh key: get rid of stack allocated array
  big key: get rid of stack array allocation
  smack: provide socketpair callback
  selinux: provide socketpair callback
  net: hook socketpair() into LSM
  security: add hook for socketpair()
  security: remove security_settime

Pull printk updates from Petr Mladek:

 - Help userspace log daemons to catch up with a flood of messages. They
   will get woken after each message even if the console is far behind
   and handled by another process.

 - Flush printk safe buffers safely even when panic() happens in the
   normal context.

 - Fix possible va_list reuse when race happened in printk_safe().

 - Remove %pCr printf format to prevent sleeping in the atomic context.

 - Misc vsprintf code cleanup.

* tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: drop in_nmi check from printk_safe_flush_on_panic()
  lib/vsprintf: Remove atomic-unsafe support for %pCr
  serial: sh-sci: Stop using printk format %pCr
  thermal: bcm2835: Stop using printk format %pCr
  clk: renesas: cpg-mssr: Stop using printk format %pCr
  printk: fix possible reuse of va_list variable
  printk: wake up klogd in vprintk_emit
  vsprintf: Tweak pF/pf comment
  lib/vsprintf: Mark expected switch fall-through
  lib/vsprintf: Replace space with '_' before crng is ready
  lib/vsprintf: Deduplicate pointer_string()
  lib/vsprintf: Move pointer_string() upper
  lib/vsprintf: Make flag_spec global
  lib/vsprintf: Make strspec global
  lib/vsprintf: Make dec_spec global
  lib/test_printf: Mark big constant with UL

Pull IPMI updates from Corey Minyard:
 "It's been a busy release for the IPMI driver. Some notable changes:

   - A user was running into timeout issues doing maintenance commands
     over the IPMB network behind an IPMI controller.

     Extend the maintenance mode concept to messages over IPMB and allow
     the timeouts to be tuned.

   - Lots of cleanup, style fixing, some bugfixes, and such.

   - At least one user was having trouble with the way the IPMI driver
     would lock the i2c driver module it used.

     The IPMI driver was not designed for hotplug. However, hotplug is a
     reality now, so the IPMI driver was modified to support hotplug.

   - The proc interface code is now completely removed. Long live sysfs!"

* tag 'for-linus-4.18' of git://github.com/cminyard/linux-ipmi: (35 commits)
  ipmi: Properly release srcu locks on error conditions
  ipmi: NPCM7xx KCS BMC: enable interrupt to the host
  ipmi:bt: Set the timeout before doing a capabilities check
  ipmi: Remove the proc interface
  ipmi_ssif: Fix uninitialized variable issue
  ipmi: add an NPCM7xx KCS BMC driver
  ipmi_si: Clean up shutdown a bit
  ipmi_si: Rename intf_num to si_num
  ipmi: Remove smi->intf checks
  ipmi_ssif: Get rid of unused intf_num
  ipmi: Get rid of ipmi_user_t and ipmi_smi_t in include files
  ipmi: ipmi_unregister_smi() cannot fail, have it return void
  ipmi_devintf: Add an error return on invalid ioctls
  ipmi: Remove usecount function from interfaces
  ipmi_ssif: Remove usecount handling
  ipmi: Remove condition on interface shutdown
  ipmi_ssif: Convert over to a shutdown handler
  ipmi_si: Convert over to a shutdown handler
  ipmi: Rework locking and shutdown for hot remove
  ipmi: Fix some counter issues
  ...

Pull EDAC updates from Borislav Petkov:

 - Stratix10 SDRAM support to altera_edac (Thor Thayer)

 - the usual misc fixes all over the place

[ Also, shared branch for socfpga_stratix10.dtsi file changes with the
  socfpga tree ]

* tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ghes: Make platform-based whitelisting x86-only
  EDAC, altera: Fix ARM64 build warning
  EDAC, skx: Fix skx_edac build error when ACPI_NFIT=m
  EDAC, ghes: Use BIT() macro
  EDAC, ghes: Add DDR4 and NVDIMM memory types
  EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10
  Documentation: dt: edac: Move Altera SOCFPGA EDAC file
  EDAC, altera: Add support for Stratix10 SDRAM EDAC
  Documentation: dt: socfpga: Add Stratix10 ECC Manager binding
  EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error()
  arm64: dts: stratix10: add sdram ecc
  EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy"
  EDAC, ghes: Add a null pointer check in ghes_edac_unregister()
  ghes, EDAC: Fix ghes_edac registration
  arm64: dts: stratix10: Change pad skew values for EMAC0 PHY driver
  ARM: dts: consistently use 'atmel' as at24 manufacturer in cyclone5
  arm64: dts: stratix10: Add PL330 DMAC to Stratix10 dts
  arm64: dts: stratix10: enable i2c, add i2c periperals
  arm64: dts: stratix10: use clock bindings for the Stratix10 platform

Pull ARM updates from Russell King:

 - Initial round of Spectre variant 1 and variant 2 fixes for 32-bit ARM

 - Clang support improvements

 - nommu updates for v8 MPU

 - enable ARM_MODULE_PLTS by default to avoid problems loading modules
   with larger kernels

 - vmlinux.lds and dma-mapping cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
  ARM: spectre-v1: fix syscall entry
  ARM: spectre-v1: add array_index_mask_nospec() implementation
  ARM: spectre-v1: add speculation barrier (csdb) macros
  ARM: KVM: report support for SMCCC_ARCH_WORKAROUND_1
  ARM: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling
  ARM: spectre-v2: KVM: invalidate icache on guest exit for Brahma B15
  ARM: KVM: invalidate icache on guest exit for Cortex-A15
  ARM: KVM: invalidate BTB on guest exit for Cortex-A12/A17
  ARM: spectre-v2: warn about incorrect context switching functions
  ARM: spectre-v2: add firmware based hardening
  ARM: spectre-v2: harden user aborts in kernel space
  ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit
  ARM: spectre-v2: harden branch predictor on context switches
  ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre
  ARM: bugs: add support for per-processor bug checking
  ARM: bugs: hook processor bug checking into SMP and suspend paths
  ARM: bugs: prepare processor bug infrastructure
  ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs
  ARM: 8774/1: remove no-op macro VMLINUX_SYMBOL()
  ARM: 8773/1: amba: Export amba_bustype
  ...

Merge tag 'linux-kselftest-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:

 - Work to restructure timers test suite to move PIE out of rtctest from
   Alexandre Belloni.

 - Several minor spelling and bug fixes.

 - New cgroup tests from Roman Gushchin and Mike Rapoport.

 - Kselftest framework changes to handle and report skipped tests
   correctly.

   Prior to these changes, framework treated all non-zero return codes
   from tests as failures. When tests are skipped with non-zero return
   code, due to unmet dependencies and/or unsupported configuration,
   reporting them as failed lead to false negatives on the tests that
   couldn't be run.

 - Fixes to test Makefiles to remove unnecessary RUN_TESTS and
   EMIT_TESTS overrides and use common defines from lib.mk.

 - Fixes to several tests to return correct Kselftest skip code.

 - Changes to improve test output.

* tag 'linux-kselftest-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (55 commits)
  selftests: lib: fix prime_numbers module search and skip logic
  selftests: intel_pstate: notification about privilege required to run intel_pstate testing script
  selftests: cgroup/memcontrol: add basic test for socket accounting
  selftest: intel_pstate: debug support message from aperf.c and return value
  kselftest/cgroup: fix variable dereferenced before check warning
  selftests/intel_pstate: Enhance table printing
  selftests/intel_pstate: Improve test, minor fixes
  selftests: cgroup/memcontrol: add basic test for swap controls
  selftests: cgroup: add memory controller self-tests
  selftests: memfd: split regular and hugetlbfs tests
  selftests: net: return Kselftest Skip code for skipped tests
  selftests: mqueue: return Kselftest Skip code for skipped tests
  selftests: memory-hotplug: return Kselftest Skip code for skipped tests
  selftests: memfd: return Kselftest Skip code for skipped tests
  selftests: membarrier: return Kselftest Skip code for skipped tests
  selftests: media_tests: return Kselftest Skip code for skipped tests
  selftests: locking: return Kselftest Skip code for skipped tests
  selftests: locking: add Makefile for locking test
  selftests: lib: return Kselftest Skip code for skipped tests
  selftests: lib: add prime_numbers.sh test to Makefile
  ...

Pull Kconfig updates from Masahiro Yamada:
 "Kconfig now supports new functionality to perform textual
  substitution. It has been a while since Linus suggested to move
  compiler option tests from makefiles to Kconfig. Finally, here it is.

  The implementation has been generalized into a Make-like macro
  language.

  Some built-in functions such as 'shell' are provided. Variables and
  user-defined functions are also supported so that 'cc-option',
  'ld-option', etc. are implemented as macros.

  Summary:

   - refactor package checks for building {m,n,q,g}conf

   - remove unused/unmaintained localization support

   - remove Kbuild cache

   - drop CONFIG_CROSS_COMPILE support

   - replace 'option env=' with direct variable expansion

   - add built-in functions such as 'shell'

   - support variables and user-defined functions

   - add helper macros as as 'cc-option'

   - add unit tests and a document of the new macro language

   - add 'testconfig' to help

   - fix warnings from GCC 8.1"

* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: Avoid format overflow warning from GCC 8.1
  kbuild: Move last word of nconfig help to the previous line
  kconfig: Add testconfig into make help output
  kconfig: add basic helper macros to scripts/Kconfig.include
  kconfig: show compiler version text in the top comment
  kconfig: test: add Kconfig macro language tests
  Documentation: kconfig: document a new Kconfig macro language
  kconfig: error out if a recursive variable references itself
  kconfig: add 'filename' and 'lineno' built-in variables
  kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
  kconfig: expand lefthand side of assignment statement
  kconfig: support append assignment operator
  kconfig: support simply expanded variable
  kconfig: support user-defined function and recursively expanded variable
  kconfig: begin PARAM state only when seeing a command keyword
  kconfig: replace $(UNAME_RELEASE) with function call
  kconfig: add 'shell' built-in function
  kconfig: add built-in function support
  kconfig: make default prompt of mainmenu less specific
  kconfig: remove sym_expand_string_value()
  ...

Replaces open-coded struct size calculations with struct_size() for
devm_*, f2fs_*, and sock_* allocations. Automatically generated (and
manually adjusted) from the following Coccinelle script:

// Direct reference to struct field.
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)
Signed-off-by: Kees Cook <keescook@chromium.org>

This only finds one hit in the entire tree, but here's the Coccinelle:

// Directly refer to structure's field
@@
identifier alloc =~ "vmalloc|vzalloc";
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT))
+ alloc(struct_size(VAR, ELEMENT, COUNT))

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "vmalloc|vzalloc";
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]))
+ alloc(struct_size(VAR, ELEMENT, COUNT))

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "vmalloc|vzalloc";
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT))
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT))
Signed-off-by: Kees Cook <keescook@chromium.org>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:

// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
//                      sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)
Signed-off-by: Kees Cook <keescook@chromium.org>

strp_unpause queues strp_work in order to parse any messages that
arrived while the strparser was paused. However, the process invoking
strp_unpause could eagerly parse a buffered message itself if it held
the sock lock.

__strp_unpause is an alternative to strp_pause that avoids the scheduling
overhead that results when a receiving thread unpauses the strparser
and waits for the next message to be delivered by the workqueue thread.

This patch more than doubled the IOPS achieved in a benchmark of NBD
traffic encrypted using ktls.
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When retransmitting the final ACK or ABORT packet for a call, the cid field
in the packet header is set to the connection's cid, but this is incorrect
as it also needs to include the channel number on that connection that the
call was made on.

Fix this by OR'ing in the channel number.

Note that this fixes the bug that:

	commit 1a025028
	rxrpc: Fix handling of call quietly cancelled out on server

works around.  I'm not intending to revert that as it will help protect
against problems that might occur on the server.

Fixes: 3136ef49 ("rxrpc: Delay terminal ACK transmission on a client call")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Salil Mehta says:

====================
Bug fixes & optimization for HNS3 Driver

This patch-set presents miscellaneous bug fixes and an optimization
for HNS3 driver

V1->V2:
	* Fixes the compilation break reported by David Miller & Kbuild
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the PF frequently switches the CMDQ interrupt, if the CMDQ_SRC is
not cleared before the hardware interrupt is generated, the new interrupt
will not be reported.

This patch optimizes this problem by clearing CMDQ_SRC and RESET_STS
before enabling interrupt and syncing pending IRQ handlers after disabling
interrupt.

Fixes: 466b0c00 ("net: hns3: Add support for misc interrupt")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before the firmware updates the crq's tail pointer, if the VF driver
reads the data in the crq, the data may be incomplete at this time,
which will lead to the driver read an unknown message.

This patch fixes it by checking if crq is empty before reading the
message.

Fixes: b11a0bb2 ("net: hns3: Add mailbox support to VF driver")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the VF frequently switches the CMDQ interrupt, if the CMDQ_SRC is not
cleared, the VF will not receive the new PF response after the interrupt
is re-enabled, the corresponding log is as follows:

[  317.482222] hns3 0000:00:03.0: VF could not get mbx resp(=0) from PF
in 500 tries
[  317.483137] hns3 0000:00:03.0: VF request to get tqp info from PF
failed -5

This patch fixes this problem by clearing CMDQ_SRC before enabling
interrupt and syncing pending IRQ handlers after disabling interrupt.

Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>