Convert various instances of printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_fbdev.c.
This also involves extracting the drm_i915_private device from various
intel types.

v2 by Jani:
- fix the final one too
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7081a49d20cc46b1b1144c83a4e21294d121d8a7.1583766715.git.jani.nikula@intel.com

This replaces the uses of the printk based drm logging macros with the
struct drm_device based logging macros in i915/display/intel_fbc.c.
This transformation was done using the following coccinelle semantic
patch that matches based on the existence of a drm_i915_private device
pointer:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were addressed manually.

v2 by Jani:
- also convert pr_info_once to drm based logging
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/32a92f1d4e4d01131605b17bec831517e39c5902.1583766715.git.jani.nikula@intel.com

For icl+, have hw read out to create hw blob of gamma
lut values. icl+ platforms supports multi segmented gamma
mode by default, add hw lut creation for this mode.

This will be used to validate gamma programming using dsb
(display state buffer) which is a tgl specific feature.

v2: -readout code for multisegmented gamma has to come
     up with some intermediate entries that aren't preserved
     in hardware (Jani N)
    -linear interpolation (Ville)
    -moved common code to check gamma_enable to specific funcs,
     since icl doesn't support that
v3: -use u16 instead of __u16 [Jani N]
    -used single lut [Jani N]
    -improved and more readable for loops [Jani N]
    -read values directly to actual locations and then fill gaps [Jani N]
    -moved cleaning to patch 1 [Jani N]
    -renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
     make it similar to icl_load_luts()
    -renamed icl_compute_interpolated_gamma_blob() to
     icl_compute_interpolated_gamma_lut_values() more sensible, I guess
v4: -removed interpolated func for creating gamma lut values
    -removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
     correctly
v5: -added gamma_enable check inside read_luts()
v6: -renamed intel_color_lut_entry_equal() to intel_color_lut_entries_equal() [Ville]
    -changed if-else to switch [Ville]
    -removed intel_color_lut_entry_multi_equal() [Ville]
v7: -checkpatch warnings
v8: -rebased
v9: -rebased, aligned with Ville's style of gamma cleanup
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317135736.14305-1-swati2.sharma@intel.com

As we have already enabled supported infrastructure for
non-contiguous pipe fusing in driver, we don't require non-contiguous
pipe_mask check anymore.
It is an unlike condition, it make sense to remove this condition.

changes since RFC:
- using intel_pipe_mask_is_valid() function to check integrity of
  pipe_mask. [Ville]
v2:
- simplify condition in intel_pipe_mask_is_valid(). [Ville]
v3:
- removed non-contiguous pipe fusing check. [Lucas]

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200318094448.26239-1-anshuman.gupta@intel.com

On running several back to back perf capture sessions involving closing
and opening the perf stream, invalid OA reports are seen in the
beginning of the OA buffer in some sessions. Fix this by invalidating OA
TLB when the perf stream is closed or disabled on gen12.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 00a7f0d7 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309211057.38575-1-umesh.nerlige.ramappa@intel.com

In order to better respond to new heartbeat intervals given via sysfs,
always reprogramme an active heartbeat upon change (i.e. use
mod_delayed_work to reschedule rather than queue_delayed_work which
ignores an already active work.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317163208.30010-1-chris@chris-wilson.co.uk

Redirect references to i915_gem_fence_reg.c to gt/intel_ggtt_fencing.c

Fixes: dec9cf9e ("drm/i915/gt: Pull restoration of GGTT fences underneath the GT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317141250.20903-1-chris@chris-wilson.co.uk

On Gen11 powergating half the execution units is a functional
requirement when using the VME samplers. Not fullfilling this
requirement can lead to hangs.

This unfortunately plays fairly poorly with the NOA requirements. NOA
requires a stable power configuration to maintain its configuration.

As a result using OA (and NOA feeding into it) so far has required us
to use a power configuration that can work for all contexts. The only
power configuration fullfilling this is powergating half the execution
units.

This makes performance analysis for 3D workloads somewhat pointless.

Failing to find a solution that would work for everybody, this change
introduces a new i915-perf stream open parameter that punts the
decision off to userspace. If this parameter is omitted, the existing
Gen11 behavior remains (half EU array powergating).

This change takes the initiative to move all perf related sseu
configuration into i915_perf.c

v2: Make parameter priviliged if different from default

v3: Fix context modifying its sseu config while i915-perf is enabled

v4: Always consider global sseu a privileged operation (Tvrtko)
    Override req_sseu point in intel_sseu_make_rpcs() (Tvrtko)
    Remove unrelated changes (Tvrtko)

v5: Some typos (Tvrtko)
    Process sseu param in read_properties_unlocked() (Tvrtko)

v6: Actually commit the bits from v5...
    Fixup some checkpath warnings

v7: Only compare engine uabi field (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317132222.2638719-3-lionel.g.landwerlin@intel.com

The caller of i915_oa_init_reg_state() already sets this.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317132222.2638719-2-lionel.g.landwerlin@intel.com

A little bit of history :

   Back when i915-perf was introduced (4.13), there was no way to
   dynamically add new OA configurations to i915. Only the generated
   configs baked in at build time were allowed.

   It quickly became obvious that we would need to allow applications
   to upload their own configurations, for instance to be able to test
   new ones, and so by the next stable version (4.14) we added uAPIs
   to allow uploading new configurations.

   When adding that capability, we took the opportunity to remove most
   HW configurations except the TestOa one which is a configuration
   IGT would rely on to verify that the HW is outputting correct
   values. At the time it made sense to have that confiuration in at
   the same time a given HW platform added to the i915-perf driver.

Now that IGT has become the reference point for HW configurations (see
commit 53f8f541ca ("lib: Add i915_perf library"), previously this was
located in the GPUTop repository), the need for having those
configurations in i915-perf is gone.

On the Mesa side, we haven't relied on this test configuration for a
while. The MDAPI library always required 4.14 feature level and always
loaded its configuration into i915.

I'm sure nobody will miss this generated stuff in i915 :)

v2: Fix selftests by creating an empty config

v3: Fix unlocking on allocation error (Dan Carpenter)

v4: Fixup checkpatch warnings

v5: Fix incorrect unlock in error path (Umesh)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317132222.2638719-1-lionel.g.landwerlin@intel.com

Beware that the context may already be closed as we try to lookup an
engine.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1389
Fixes: 130a95e9 ("drm/i915/gem: Consolidate ctx->engines[] release")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316161447.18410-1-chris@chris-wilson.co.uk

Apparently we do try and attach a fence to an invalid vma (during
execbuf) so we cannot simply assert it never happens and report EINVAL
instead.

Fixes: dec9cf9e ("drm/i915/gt: Pull restoration of GGTT fences underneath the GT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316205450.15843-1-chris@chris-wilson.co.uk

Since the number of fence regs can vary dramactically between platforms,
allocate the array on demand so we don't waste as much space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-4-chris@chris-wilson.co.uk

Since we always reload the fence register state on runtime resume,
having it explicitly in the S0ix resume code is redundant. Indeed, it
is not even being used!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-3-chris@chris-wilson.co.uk

Make the GT responsible for restoring its fence when it wakes up from
suspend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-2-chris@chris-wilson.co.uk

Since the fence registers control HW detiling through the GGTT
aperture, make them a part of the intel_ggtt under gt/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316113846.4974-1-chris@chris-wilson.co.uk

The residual w/a batch is causing system instablity on Ivybridge and
Baytrail under some workloads, so disable until resolved.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1405
Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311103640.26572-1-chris@chris-wilson.co.uk

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

We have a few TGL machines in our CI and it is mostly green with
failures in tests that will not impact future Linux installations.
Also there is no warnings, errors, flickering or any visual defects
while doing ordinary tasks like browsing and editing documents in a
dual monitor setup.

As a reminder i915.require_force_probe was created to protect
future Linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.

Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-tgl-u.html
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/shard-tglb.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218230822.66801-1-jose.souza@intel.com

This workaround appears under two different numbers (and with somewhat
confused stepping applicability on ICL).  Ultimately it appears we
should just implement this for all stepping of ICL and EHL.

Note that this is identical to Wa_1407928979:tgl that already exists in
our driver too...yet another number referencing the same actual
workaround.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-7-matthew.d.roper@intel.comReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

The register this workaround updates is a render engine register in the
MCR range, so we should initialize this in rcs_engine_wa_init() rather
than gt_wa_init().

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1222
Fixes: 36204d80 ("drm/i915/icl: Wa_1406680159")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-6-matthew.d.roper@intel.comReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

v2:
 - Move to context workarounds.  ROW_CHICKEN4 is part of the context
   image on gen11 (although it isn't on gen12).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-5-matthew.d.roper@intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>

The bspec description for this workaround tells us to program
0xFFFF_FFFF into both FBC_RT_BASE_ADDR_REGISTER_* registers, but we've
previously found that this leads to failures in CI.  Our suspicion is
that the failures are caused by this valid turning on the "address valid
bit" even though we're intentionally supplying an invalid address.
Experimentation has shown that setting all bits _except_ for the
RT_VALID bit seems to avoid these failures.

v2:
 - Mask off the RT_VALID bit.  Experimentation with CI trybot indicates
   that this is necessary to avoid reset failures on BCS.

v3:
 - Program RT_BASE before RT_BASE_UPPER so that the valid bit is turned
   off by the first write.  (Chris)

Bspec: 11388
Bspec: 33451
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-4-matthew.d.roper@intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>

On gen11 the XY_FAST_COPY_BLT command has some size restrictions on its
usage.  Although this instruction is mainly used by userspace, i915 also
uses it to copy object contents during some selftests, so let's ensure
the restrictions are followed.

Bspec: 6544
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-3-matthew.d.roper@intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>

The bspec documents multiple MCR ranges; make sure they're all captured
by the driver.

Bspec: 13991, 52079
Fixes: 592a7c5e ("drm/i915: Extend non readable mcr range")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.comReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

Throw in the inverse patterns to create more examples of poison to use
against the LRC state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313102812.30173-1-chris@chris-wilson.co.uk

This reverts commit 36a6b5d9.

The commit takes care Wa_1604544889 which was fixed on a0 stepping based on
a0 replan. So no SW workaround is required on any stepping now.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: 36a6b5d9 ("drm/i915/tgl: Add extra hdc flush workaround")
Link: https://patchwork.freedesktop.org/patch/msgid/1c751032ce79c80c5485cae315f1a9904ce07cac.1583359940.git.caz.yokoyama@intel.com

During driver unload, we have many asserts that we have released our
bookkeeping structs and are idle. In some cases, these struct are
protected by RCU and we do not release them until after an RCU grace
period.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 130a95e9 ("drm/i915/gem: Consolidate ctx->engines[] release")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312115307.16460-1-chris@chris-wilson.co.uk

Switch igt_vm_isolation() to using igt_random_offset().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312154708.1720-1-chris@chris-wilson.co.uk

Since the relocations are no longer performed under a global
struct_mutex, or any other lock, that is also held by pagefault handlers,
we can relax and allow our fast path to take a fault. As we no longer
need to abort the fast path for lock avoidance, we no longer need the
slow path handling at all.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311160310.26711-1-chris@chris-wilson.co.uk

Allow super long OpenCL workloads which cannot be preempted within
the default timeout to run out of the box.

v2:
 * Make it stick out more and apply only to RCS. (Chris)

v3:
 * Mention platform override in kconfig. (Joonas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michal Mrozek <Michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312115748.29970-1-tvrtko.ursulin@linux.intel.com

When applying the context-barrier, we only care about the current
engines, as the next set of engines will be naturally after the barrier.
So we can skip holding the ctx->engines_mutex while constructing the
request by taking a sneaky reference to the i915_gem_engines instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311221739.30375-2-chris@chris-wilson.co.uk

The sw-fence notify function requires to be at least 4-byte aligned so
that we can use the low bits in the function pointer for internal fence
flags. Make it so.

References: https://gitlab.freedesktop.org/drm/intel/issues/1433
Fixes: 42fb60de ("drm/i915/gem: Don't leak non-persistent requests on changing engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311221739.30375-1-chris@chris-wilson.co.uk

Gen12 hardware supports HDMI audio pixel clocks of 296.7/297Mhz
and 593.4/594Mhz. Add the missing rates and add logic to ignore
them if running on older hardware.

Bspec: 49333
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310162338.9387-1-kai.vehmanen@linux.intel.com

[11057.642683] BUG: KCSAN: data-race in i915_gem_mmap [i915] / singleton_release [i915]
[11057.642717]
[11057.642740] write (marked) to 0xffff8881f24471a0 of 8 bytes by task 44668 on cpu 2:
[11057.643162]  singleton_release+0x38/0x60 [i915]
[11057.643192]  __fput+0x160/0x3c0
[11057.643217]  ____fput+0x16/0x20
[11057.643241]  task_work_run+0xba/0x100
[11057.643263]  exit_to_usermode_loop+0xe4/0xf0
[11057.643286]  do_syscall_64+0x27e/0x2c0
[11057.643314]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11057.643339]
[11057.643359] read to 0xffff8881f24471a0 of 8 bytes by task 44667 on cpu 3:
[11057.643774]  i915_gem_mmap+0x295/0x670 [i915]
[11057.643802]  mmap_region+0x62b/0xac0
[11057.643825]  do_mmap+0x414/0x6b0
[11057.643848]  vm_mmap_pgoff+0xa9/0xf0
[11057.643875]  ksys_mmap_pgoff+0x1ac/0x2f0
[11057.643900]  do_syscall_64+0x6e/0x2c0
[11057.643924]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-3-chris@chris-wilson.co.uk

Record the initial active element we use when building the next ELSP
submission, so that we can compare against it latter to see if there's
no change.

Fixes: 44d0a9c0 ("drm/i915/execlists: Skip redundant resubmission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk

Avoid angering kcsan by serialising the read of the pm_events with the
write in rps_disable_interrupts.

[ 6268.713419] BUG: KCSAN: data-race in intel_rps_park [i915] / rps_work [i915]
[ 6268.713437]
[ 6268.713449] write to 0xffff8881eda8efac of 4 bytes by task 1127 on cpu 3:
[ 6268.713680]  intel_rps_park+0x136/0x260 [i915]
[ 6268.713905]  __gt_park+0x61/0xa0 [i915]
[ 6268.714128]  ____intel_wakeref_put_last+0x42/0x90 [i915]
[ 6268.714352]  __intel_wakeref_put_work+0xd3/0xf0 [i915]
[ 6268.714369]  process_one_work+0x3b1/0x690
[ 6268.714384]  worker_thread+0x80/0x670
[ 6268.714398]  kthread+0x19a/0x1e0
[ 6268.714412]  ret_from_fork+0x1f/0x30
[ 6268.714423]
[ 6268.714435] read to 0xffff8881eda8efac of 4 bytes by task 950 on cpu 2:
[ 6268.714664]  rps_work+0xc2/0x680 [i915]
[ 6268.714679]  process_one_work+0x3b1/0x690
[ 6268.714693]  worker_thread+0x80/0x670
[ 6268.714707]  kthread+0x19a/0x1e0
[ 6268.714720]  ret_from_fork+0x1f/0x30

v2: Mark all reads and writes of rpm->pm_events.

The flow of enabling/disabling rps is stronly ordered, so the writes and
interrupt generation are also strongly ordered -- just this may not be
visible to the compiler, so provide annotations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-1-chris@chris-wilson.co.uk

Extend i915_request_await_active() to be able to asynchronously wait on
all the tracked timelines simultaneously.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092044.16353-1-chris@chris-wilson.co.uk

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311073256.6535-1-tiwai@suse.de

Convert various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_overlay.c.
This transformation was achieved using the following coccinelle script:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Note that this converts DRM_DEBUG to drm_dbg().

Checkpatch warnings were addressed manually.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.htmlSigned-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ca3c14de13e308419caf33eb4bbf274f5387f1e0.1583766715.git.jani.nikula@intel.com