- 06 Jan, 2007 31 commits
-
-
Avi Kivity authored
It is never necessary to fetch a guest entry from an intermediate page table level (except for large pages), so avoid some confusion by always descending into the lowest possible level. Rename init_walker() to walk_addr() as it is no longer restricted to initialization. Signed-off-by:
Avi Kivity <avi@qumranet.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Avi Kivity authored
In pae mode, a load of cr3 loads the four third-level page table entries in addition to cr3 itself. Signed-off-by:
-
Avi Kivity authored
Saving the table gfns removes the need to walk the guest and host page tables in lockstep. Signed-off-by:
-
Avi Kivity authored
Keep in each host page frame's page->private a pointer to the shadow pte which maps it. If there are multiple shadow ptes mapping the page, set bit 0 of page->private, and use the rest as a pointer to a linked list of all such mappings. Reverse mappings are needed because we when we cache shadow page tables, we must protect the guest page tables from being modified by the guest, as that would invalidate the cached ptes. Signed-off-by:
-
Avi Kivity authored
Hardware virtualization implementations allow the guests to freely change some of the bits in cr0 and cr4, but trap when changing the other bits. This is useful to avoid excessive exits due to changing, for example, the ts flag. It also means the kvm's copy of cr0 and cr4 may be stale with respect to these bits. most of the time this doesn't matter as these bits are not very interesting. Other times, however (for example when returning cr0 to userspace), they are, so get the fresh contents of these bits from the guest by means of a new arch operation. Signed-off-by:
-
David Brownell authored
Bugfixes: - Handle RTCs which are configured to use 12-hour mode. - Never report bogus/un-initialized times. - Displaying "raw trim" requires not masking it first! - Fix the sysfs and procfs display of crystal and trim data. Features: - Handle other RTCs in this family, notably rv5c386/rv5c387. - Declare the other registers. - Provide alarm get/set functionality. - Handle AIE and UIE; but no IRQ handling yet. Cleanup: - Shrink object by not including needless sysfs or procfs support - We don't need no steenkin' forward declarations. (Except one.) Until the I2C framework merges "new style" driver support, matching the driver model better, using rv5c chips or alarm IRQs requires a separate board-specific patch. (And an IRQ handler, handing off labor through a work_struct...) This uses the "method 3" register reads, but notes that it's done to work around an evident i2c adapter driver bug. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Hugh Dickins authored
pdflush hit the BUG_ON(!PageSlab(page)) in kmem_freepages called from fallback_alloc: cache_grow already freed those pages when alloc_slabmgmt failed. But it wouldn't have freed them if __GFP_NO_GROW, so make sure fallback_alloc doesn't waste its time on that case. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Acked-by:
Christoph Lameter <clameter@sgi.com> Acked-by:
Pekka J Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Eric Sandeen authored
CVE-2006-5753 is for a case where an inode can be marked bad, switching the ops to bad_inode_ops, which are all connected as: static int return_EIO(void) { return -EIO; } #define EIO_ERROR ((void *) (return_EIO)) static struct inode_operations bad_inode_ops = { .create = bad_inode_create ...etc... The problem here is that the void cast causes return types to not be promoted, and for ops such as listxattr which expect more than 32 bits of return value, the 32-bit -EIO is interpreted as a large positive 64-bit number, i.e. 0x00000000fffffffa instead of 0xfffffffa. This goes particularly badly when the return value is taken as a number of bytes to copy into, say, a user's buffer for example... I originally had coded up the fix by creating a return_EIO_<TYPE> macro for each return type, like this: static int return_EIO_int(void) { return -EIO; } #define EIO_ERROR_INT ((void *) (return_EIO_int)) static struct inode_operations bad_inode_ops = { .create = EIO_ERROR_INT, ...etc... but Al felt that it was probably better to create an EIO-returner for each actual op signature. Since so few ops share a signature, I just went ahead & created an EIO function for each individual file & inode op that returns a value. Signed-off-by:Eric Sandeen <sandeen@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Andrew Morton authored
Make this: drivers/char/ip2/ip2main.c: In function 'ip2_loadmain': drivers/char/ip2/ip2main.c:654: warning: control may reach end of non-void function 'iiSetAddress' being inlined drivers/char/ip2/ip2main.c:808: warning: control may reach end of non-void function 'iiInitialize' being inlined go away. Signed-off-by:
-
Vivek Goyal authored
o Currently synchronize_tsc_ap() is of type __init. It is called by smp_callin() which is of type __cpuinit. So synchronize_tsc_ap() should be of type __cpuinit. o Modpost generates warnings for i386 if CONFIG_RELOCATABLE=y and CONFIG_HOTPLUG_CPU=y WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'start_secondary' (at offset 0xc01164dc) and 'initialize_secondary' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'start_secondary' (at offset 0xc01164e8) and 'initialize_secondary' o tsc is of type __initdata. It should be of type __cpuinitdata. Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Vivek Goyal authored
o MODPOST generates warning for i386 if kernel is compiled with CONFIG_RELOCATABLE=y WARNING: vmlinux - Section mismatch: reference to .init.data: from .data between 'this_cpu' (at offset 0xc05194d0) and 'cpuinfo_op' o this_cpu pointer should be of type __cpuinitdata. Signed-off-by:
-
Vivek Goyal authored
o MODPOST generates warning for i386 if kernel is compiled with CONFIG_RELOCATABLE=y WARNING: vmlinux - Section mismatch: reference to .init.text:startup_32_smp from .data between 'trampoline_data' (at offset 0xc0519cf8) and 'boot_gdt' o trampoline code/data can go into init section is CPU hotplug is not enabled. Signed-off-by:
-
Paul Mundt authored
At the moment the inode/dentry cache hash tables (common by way of alloc_large_system_hash()) are incorrectly sized by their respective detection logic when we attempt to use large base pages on systems with little memory. This results in odd behaviour when using a 64kB PAGE_SIZE, such as: Dentry cache hash table entries: 8192 (order: -1, 32768 bytes) Inode-cache hash table entries: 4096 (order: -2, 16384 bytes) The mount cache hash table is seemingly the only one that gets this right by directly taking PAGE_SIZE in to account. The following patch attempts to catch the bogus values and round it up to at least 0-order. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Vivek Goyal authored
o Relocatable bzImage support had got rid of CONFIG_PHYSICAL_START option thinking that now this option is not required as people can build a second kernel as relocatable and load it anywhere. So need of compiling the kernel for a custom address was gone. But Magnus uses vmlinux images for second kernel in Xen environment and he wants to continue to use it. o Restoring the CONFIG_PHYSICAL_START option for the time being. I think down the line we can get rid of it. Signed-off-by:
-
Ingo Molnar authored
Fix sched profiling typo, introduced by the sleep profiling patch. This bug caused profile=sched to not work. Signed-off-by:
-
Rafael J. Wysocki authored
In the kernels later than 2.6.19 there is a regression that makes swsusp fail if the resume device is not explicitly specified. It can be fixed by adding an additional parameter to mm/swapfile.c:swap_type_of() allowing us to pass the (struct block_device *) corresponding to the first available swap back to the caller. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
James Bursa authored
Fix filenames on adfs discs being terminated at the first character greater than 128 (adfs filenames are Latin 1). I saw this problem when using a loopback adfs image on a 2.6.17-rc5 x86_64 machine, and the patch fixed it there. Signed-off-by:
-
Alan authored
When the old IDE layer calls into methods in the driver during error handling it is essentially random whether ide_lock is already held. This causes a deadlock in the atiixp driver which also uses ide_lock internally for locking. Switch to a private lock instead. [akpm@osl.org: cleanup] Signed-off-by:
Alan Cox <alan@redhat.com> Acked-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7667 This is because the packet driver tries to send down read/write BLOCK_PC commands that don't use a bio and do not use sg lists. The right fix is to replace all the packet_command stuff in the packet driver by scsi_execute() which needs to be lifted from scsi code to the block code for that. Fix the bug for now. It's not the full way to a generic execute block pc infrastcuture but fixes the bug for the time being. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Peter Osterlund <petero2@telia.com> Signed-off-by:
-
David Brownell authored
The at91rm9200 RTC driver needs some assistance to build, because of recent header file rearrangement. Signed-off-by:
-
Dor Laor authored
The current interrupt injection mechanism might delay an interrupt under the following circumstances: - if injection fails because the guest is not interruptible (rflags.IF clear, or after a 'mov ss' or 'sti' instruction). Userspace can check rflags, but the other cases or not testable under the current API. - if injection fails because of a fault during delivery. This probably never happens under normal guests. - if injection fails due to a physical interrupt causing a vmexit so that it can be handled by the host. In all cases the guest proceeds without processing the interrupt, reducing the interactive feel and interrupt throughput of the guest. This patch fixes the situation by allowing userspace to request an exit when the 'interrupt window' opens, so that it can re-inject the interrupt at the right time. Guest interactivity is very visibly improved. Signed-off-by:
Dor Laor <dor.laor@qumranet.com> Signed-off-by:
-
Yoshimi Ichiyanagi authored
If we load the wrong arch module, it leaves behind kvm_arch_ops set, which prevents loading of the correct arch module later. Fix be not setting kvm_arch_ops until we're sure it's good. Signed-off-by:
Yoshimi Ichiyanagi <ichiyanagi.yoshimi@lab.ntt.co.jp> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Ingo Molnar authored
KVM does kmalloc() in an atomic section while having preemption disabled via vcpu_load(). Fix this by moving the ->*_msr setup from the vcpu_setup method to the vcpu_create method. (This is also a small speedup for setting up a vcpu, which can in theory be more frequent than the vcpu_create method). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
This patch fixes 2.6.15 regression, is straightforward and tested. Cable detection got broken probably while converting the driver to support multiple controllers. Cable detection is done by examining how BIOS configured the attached devices. The current code is broken in that it examines the status *after* modifying Clk66 configuration ending up detecting 40c cables as 80c. This patch fixes it. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
-
Ard van Breemen authored
The pci_find_subsys gets called very early by obsolete ide setup parameters. This is a bogus call since pci is not initialized yet, so the list is empty. But in the mean time, interrupts get enabled by down_read. This can result in a kernel panic when the irq controller gets initialized. This patch checks if the device list is empty before taking the semaphore, and hence will not enable irq's. Furthermore it will inform that it is called while pci_devices is empty as a reminder that the ide code needs to be fixed. The pci_get_subsys can get called in the same manner, and as such is patched in the same manner. [akpm@osdl.org: cleanups] Signed-off-by:
Ard van Breemen <ard@telegraafnet.nl> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Ard van Breemen authored
The parsing of some kernel parameters seem to enable irq's at a stage that irq's are not supposed to be enabled (Particularly the ide kernel parameters). Having irq's enabled before the irq controller is initialized might lead to a kernel panic. This patch only detects this behaviour and warns about wich parameter caused it. [akpm@osdl.org: cleanups] Signed-off-by:
-
Ard van Breemen authored
The calls made by parse_parms to other initialization code might enable interrupts again way too early. Having interrupts on this early can make systems PANIC when they initialize the IRQ controllers (which happens later in the code). This patch detects that irq's are enabled again, barfs about it and disables them again as a safety net. [akpm@osdl.org: cleanups] Signed-off-by:
-
Richard Purdie authored
Russell King recently reminded us that one shouldn't use asm/arch/hardware.h but one should use asm/hardware.h (http://lkml.org/lkml/2006/12/23/26). Unfortunately, the leds-s3c24xx driver is using the wrong header. This patch is fixing that. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Acked-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Dave Jones authored
drivers/macintosh/via-pmu.c: In function 'pmac_suspend_devices': drivers/macintosh/via-pmu.c:2014: error: implicit declaration of function 'pm_prepare_console' drivers/macintosh/via-pmu.c: In function 'pmac_wakeup_devices': drivers/macintosh/via-pmu.c:2139: error: implicit declaration of function 'pm_restore_console' Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Adam Megacz authored
Jeffrey Altman, one of the gatekeepers of OpenAFS (the open source project which inherited the Transarc/IBM AFS codebase) has requested that the magic number 0x5346414F (little endian 'OAFS') be allocated for the f_type field of the fsinfo structure on Linux: https://lists.openafs.org/pipermail/openafs-info/2006-December/024829.html Add it to include/linux/magic.h, mostly as a way of publishing this number and ensuring that no other filesystem accidentally uses it. Cc: Jeffrey Altman <jaltman@secure-endpoints.com> Signed-off-by:
-
- 04 Jan, 2007 9 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SOUND] Sparc CS4231: Use 64 for period_bytes_min [SOUND] Sparc CS4231: Fix IRQ return value and initialization.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4/IPV6]: Fix inet{,6} device initialization order. [TCP]: Use old definition of before [NETFILTER]: ebtables: don't compute gap before checking struct type [NETFILTER]: nf_nat: fix MASQUERADE crash on device down [NETFILTER]: New connection tracking is not EXPERIMENTAL anymore [NETFILTER]: Fix routing of REJECT target generated packets in output chain [NETFILTER]: compat offsets size change [SUNGEM]: PHY updates & pause fixes (#2) [X25]: proper prototype for x25_init_timers() [AF_NETLINK]: module_put cleanup [XFRM_USER]: avoid pointless void ** casts [NETFILTER] xt_hashlimit.c: fix typo [NET] drivers/net/loopback.c: convert to module_init() [PKTGEN]: Convert to kthread API. [NET]: ifb double-counts packets -
David L Stevens authored
It is important that we only assign dev->ip{,6}_ptr only after all portions of the inet{,6} are setup. Otherwise we can receive packets before the multicast spinlocks et al. are initialized. Signed-off-by:David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
This reverts the new (unambiguous) definition of the TCP `before' relation. As pointed out in an example by Herbert Xu, there is existing code which implicitly requires the old definition in order to work correctly. Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Chuck Ebbert authored
We cannot compute the gap until we know we have a 'struct ebt_entry' and not 'struct ebt_entries'. Failure to check can cause crash. Tested-by:
Santiago Garcia Mantinan <manty@manty.net> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Martin Josefsson authored
Check the return value of nfct_nat() in device_cmp(), we might very well have non NAT conntrack entries as well (Netfilter bugzilla #528). Signed-off-by:
Martin Josefsson <gandalf@wlug.westbo.se> Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Packets generated by the REJECT target in the output chain have a local destination address and a foreign source address. Make sure not to use the foreign source address for the output route lookup. Signed-off-by:
-
Dmitry Mishin authored
Used by compat code offsets of entries should be 'unsigned int' as entries array size has this dimension. Signed-off-by:
Dmitry Mishin <dim@openvz.org> Signed-off-by:
-
