- 23 Aug, 2017 2 commits
-
-
Rodrigo Vivi authored
To avoid a potential hang condition with TLB invalidation we need to enable masked bit 5 of MMIO 0xE5F0 at boot. Same workaround was in place for previous platforms, but the register offset has changed for CNL. But also BSpec doesn't mention the bit 15 as set on gen9 platforms and mark bit as reserved on CNL. v2: Improve commit message accepting Oscar's suggestion. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Oscar Mateo <oscar.mateo@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170823203504.10012-1-rodrigo.vivi@intel.com
-
Oscar Mateo authored
CS sometimes hangs on 3D Push Constant dispatches with the new deref enhancement logic in CNL. v2: Improve the commit message (Rodrigo) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
- 22 Aug, 2017 12 commits
-
-
Chris Wilson authored
We use WC pages for coherent writes into the ppGTT on !llc architectures. However, to create a WC page requires a stop_machine(), i.e. is very slow. To compensate we currently keep a per-vm cache of recently freed pages, but we still see the slow startup of new contexts. We can amoritize that cost slightly by allocating WC pages in small batches (PAGEVEC_SIZE == 14) and since creating a WC page implies a stop_machine() there is no penalty for keeping that stash global. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170822173828.5932-1-chris@chris-wilson.co.uk
-
Rodrigo Vivi authored
Coffee Lake CPU on Kaby Lake PCH is possible. It does exist, and it does work. The only missed case was this warning here noticed by Wendy who could get one system with this configuration and reported the issue for us: Hardware Configuration Board ID KBL S DDR4 UDIMM EV CRB Processor Intel
® Processor code named Coffee Lake S, (6+2), 6 cores 12 threads, GT2, A0 (Internal) (QNJ4) [ 3.220585] WARNING: CPU: 10 PID: 206 at drivers/gpu/drm/i915/i915_drv.c:340 i915_driver_load+0x1210/0x1660 [i915] [ 3.221312] Modules linked in: hid_generic usbhid i915 i2c_algo_bit drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt nvme fb_sys_fops ptp ahci i2c_hid drm pps_core nvme_core libahci wmi hid video [ 3.222050] CPU: 10 PID: 206 Comm: systemd-udevd Not tainted 4.13.0-rc5-intel-next+ #1 [ 3.222706] Hardware name: Intel Corporation Kabylake Client platform/KBL S DDR4 UDIMM EV CRB, BIOS KBLSE2R1.R00.X089.P00.1705051000 05/05/2017 Cc: Wendy Wang <wendy.wang@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170821235056.9015-1-rodrigo.vivi@intel.com
-
Paulo Zanoni authored
Move the part that reads the table and sets registers based on the table to its own function. v2: Rebase. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170822000356.17330-2-rodrigo.vivi@intel.com
-
Paulo Zanoni authored
Make it a little less magical and a little simpler and more hardcoded so we don't end up with an array that's composed mostly of empty entries. v2: Add an enum for the voltage+register values (Ville). Signed-off-by:
-
Chris Wilson authored
If we miss the current vblank because the gpu was busy, that may cause a jitter as the frame rate temporarily drops. We try to limit the impact of this by then boosting the GPU clock to deliver the frame as quickly as possible. Originally done in commit 6ad790c0 ("drm/i915: Boost GPU frequency if we detect outstanding pageflips") but was never forward ported to atomic and finally dropped in commit fd3a4024 ("drm/i915: Rip out legacy page_flip completion/irq handling"). One of the most typical use-cases for this is a mostly idle desktop. Rendering one frame of the desktop's frontbuffer can easily be accomplished by the GPU running at low frequency, but often exceeds the time budget of the desktop compositor. The result is that animations such as opening the menu, doing a fullscreen switch, or even just trying to move a window around are slow and jerky. We need to respond within a frame to give the best impression of a smooth UX, as a compromise we instead respond if that first frame misses its goal. The result should be a near-imperceivable initial delay and a smooth animation even starting from idle. The cost, as ever, is that we spend more power than is strictly necessary as we overestimate the required GPU frequency and then try to ramp down. This of course is reactionary, too little, too late; nevertheless it is surprisingly effective. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102199Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
-
Ville Syrjälä authored
The enable/disable/etc. encoder hooks aren't supposed to alter the state(s), so pass them as const. Unfortunately C lacks any kind of deep const thingy, so this can't catch all abuses. But at least it acts as a hint to the reader telling them not to mess about with the state(s). v2: Update intel_tv_mode_find() and ironlake_edp_pll_on() as well v3: Deal with intel_sdvo_connector_state Acked-by:
-
Ville Syrjälä authored
The PSR enable/disable need to know things about the crtc state, so plumb it through. This will become even more important when we start to reuse the generic infoframe code for the VSC DIP programming as the infoframe code wants the crtc state as well. v2: Fix kernel docs Reviewed-by:
-
Ville Syrjälä authored
DP ports may want to use the video DIP for SDP transmission, so let's initialize the vfuncs for DP encoders as well. The only exception is port A eDP prior to HSW as that one doesn't have a video DIP instance. Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818134958.15502-6-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
DP ports will also want to utilize the video DIP for SDP transmission. So let's move the vfuncs into the dig_port. v2: Rebase due to DDI changes Signed-off-by:
-
Ville Syrjälä authored
Disabling the video DIP when shutting the port down seems like a good idea. Bspec says: "When disabling both the DIP port and DIP transmission, first disable the port and then disable DIP." and "Restriction : GCP is only supported with HDMI when the bits per color is not equal to 8. GCP must be enabled prior to enabling TRANS_DDI_FUNC_CTL for HDMI with bits per color not equal to 8 and disabled after disabling TRANS_DDI_FUNC_CTL" So let's do it in the .post_disable() hook. v2: Remove double "dpms off" caused by rebase fail Signed-off-by:
-
Ville Syrjälä authored
has_infoframe is what tells us whether infoframes should be enabled, so let's pass that instead of has_hdmi_sink to .set_infoframes(). Reviewed-by:
-
Michel Thierry authored
The corruption in CSB mmio reads we were seeing has been tracked down to incorrectly touching forcewake of all domains, following an engine reset. It is still a mistery why we only catched this in Broxton, since it could happen in any platform. With that fix already merged, commit 4055dc75 ("drm/i915: Stop touching forcewake following a gen6+ engine reset"), lets try to enable per-engine resets in Broxton one more time. This reverts commit f188258bde0f ("drm/i915: Disable per-engine reset for Broxton"). Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818172342.7282-1-michel.thierry@intel.comTested-by:
-
- 21 Aug, 2017 2 commits
-
-
Jani Nikula authored
Expose across driver for future work. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Reviewed-by:
Jim Bride <jim.bride@linux.intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818093020.19160-2-jani.nikula@intel.com
-
Jani Nikula authored
Emphasize that this is based on the port, not intel_dp. This is also in line with the underlying intel_bios_is_port_edp() function. No functional changes. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Reviewed-by:
-
- 18 Aug, 2017 16 commits
-
-
Rodrigo Vivi authored
This bit enables hardware that will change the approximation used for distances calculations for AA wide lines so that they are rendered more accurately. The default value for this bit leaves the legacy behavior. There is no good reason to not enable the new approximation except if comparing to previous GEN rendered images. v2: Rebase v3: Fix author. Rebased by Rodrigo who also added a comment as suggested by Oscar. Since it is surrounded by Workarounds let's just add a comment to make clear it is not an Wa. Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
WA forTDS handle reallocation getting dropped by SDE, which may result in PS attribute corruption. Disable enhanced SBE vertex caching in COMMON_SLICE_CHICKEN2 offset. v2: Make it until B0 as spec tells. (by Mika). Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
WA to disable replay buffer destination buffer arbitration optimization. Same Wa on previous platforms has a different name: WaToEnableHwFixForPushConstHWBug Signed-off-by:
-
Rodrigo Vivi authored
Let's inherit workarounds from previous platforms that according to wa_database and BSpec are still valid for Cannonlake. v2: Add missed workarounds. v3: Rebase v4: Remove bad chunk that was added to rc6 disable. (Ander) Also remove A0 W/a that are not needed anymore. v5: Rebase on top of CFL. v6: Remove empty gen9_init_perctx_bb and gen9_init_indirectctx_bb since they don't carry any gen10 related W/a. (by Oscar). Also Remove A0 exclusive workaround. v7: Remove more A0 exclusive workarounds. As pointed out by Oscar many workarounds were changed to be A0 only so let's remove them. Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: -
Chris Wilson authored
During a global reset, we disable the irq. As we disable the irq, the hardware may be raising a GT interrupt that we then ignore, leaving it pending in the GTIIR. After the reset, we then re-enable the irq, triggering the pending interrupt. However, that interrupt was for the stale state from before the reset, and the contents of the CSB buffer are now invalid. v2: Add a comment to make it clear that the double clear is purely my paranoia. Reported-by:
"Dong, Chuanxiao" <chuanxiao.dong@intel.com> Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests") Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
Andy Shevchenko authored
The commit 213e08ad ("drm/i915/bxt: add bxt dsi gpio element support") enables GPIO support for Broxton based platforms. While using that API we might get into troubles in the future, because we can't rely on label name in the driver since vendor firmware might provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in which case the request will fail). To avoid inconsistency and potential issues we have two options: a) generate GPIO ACPI mapping table and supply it via acpi_dev_add_driver_gpios(), or b) just pass NULL as connection ID. The b) approach is much simpler and would work since the driver relies on GPIO indices only. Moreover, the _CRS fallback mechanism, when requesting GPIO, has been made stricter, and supplying non-NULL connection ID when neither _DSD, nor GPIO ACPI mapping is present, is making request fail. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921 Fixes: f10e4bf6 ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
In a synchronous setup, we may retire the last request before we complete allocating the next request. As the last request is retired, we queue a timer to mark the device as idle, and promptly have to execute ad cancel that timer once we complete allocating the request and need to keep the device awake. If we rearrange the mark_busy() to occur before we retire the previous request, we can skip this ping-pong. v2: Joonas pointed out that unreserve_seqno() was now doing more than doing seqno handling and should be renamed to reflect its wider purpose. That also highlighted the new asymmetry with reserve_seqno(), so fixup that and rename both to [un]reserve_engine(). Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
The word out was dropped from the sentence across the line break, put it back. Signed-off-by:
-
Chris Wilson authored
This was the competing idea long ago, but it was only with the rewrite of the idr as an radixtree and using the radixtree directly ourselves, along with the realisation that we can store the vma directly in the radixtree and only need a list for the reverse mapping, that made the patch performant enough to displace using a hashtable. Though the vma ht is fast and doesn't require any extra allocation (as we can embed the node inside the vma), it does require a thread for resizing and serialization and will have the occasional slow lookup. That is hairy enough to investigate alternatives and favour them if equivalent in peak performance. One advantage of allocating an indirection entry is that we can support a single shared bo between many clients, something that was done on a first-come first-serve basis for shared GGTT vma previously. To offset the extra allocations, we create yet another kmem_cache for them. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since the introduction of being able to perform a lockless lookup of an object (i915_gem_object_get_rcu() in fbbd37b3 ("drm/i915: Move object release to a freelist + worker") we no longer need to split the object/vma lookup into 3 phases and so combine them into a much simpler single loop. Signed-off-by:
-
Chris Wilson authored
When userspace is doing most of the work, avoiding relocs (using NO_RELOC) and opting out of implicit synchronisation (using ASYNC), we still spend a lot of time processing the arrays in execbuf, even though we now should have nothing to do most of the time. One issue that becomes readily apparent in profiling anv is that iterating over the large execobj[] is unfriendly to the loop prefetchers of the CPU and it much prefers iterating over a pair of arrays rather than one big array. v2: Clear vma[] on construction to handle errors during vma lookup Signed-off-by:
-
Chris Wilson authored
Since we keep the context around across the slow lookup where we may drop the struct_mutex, we should double check that the context is still valid upon reacquisition. Signed-off-by:
-
Chris Wilson authored
MI_STORE_DWORD_IMM just doesn't work on the video decode engine under Sandybridge, so refrain from using it. Then switch the selftests over to using the now common test prior to using MI_STORE_DWORD_IMM. Fixes: 7dd4f672 ("drm/i915: Async GPU relocation processing") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Chris Wilson authored
Forcewake is not affected by the engine reset on gen6+. Indeed the reason why we added intel_uncore_forcewake_reset() to gen6_reset_engines() was to keep the bookkeeping intact because the reset did not touch the forcewake bit (yet we cancelled the forcewake consumers)! This was done in commit 521198a2: Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Fri Aug 23 16:52:30 2013 +0300 drm/i915: sanitize forcewake registers on reset In reset we try to restore the forcewake state to pre reset state, using forcewake_count. The reset doesn't seem to clear the forcewake bits so we get warn on forcewake ack register not clearing. That futzing of the forcewake bookkeeping was dropped in commit 0294ae7b ("drm/i915: Consolidate forcewake resetting to a single function"), but it did not make the realisation that the remaining intel_uncore_forcewake_reset() was redundant. The new danger with using intel_uncore_forcewake_reset() with per-engine resets is that the driver and hw are still in an active state as we perform the reset. We may be using the forcewake to read protected registers elsewhere and those results may be clobbered by the concurrent dropping of forcewake. Reported-by:
-
Daniel Vetter authored
For a bunch of reasons[1] I've decided to step down as maintainer and let some other folks enjoy the reputation and hang out in the spotlight. Jani is going to stick around with his expertise in kms and having done the fixes flow for a long time now. Joonas will join and bring in his knowledge on all things GEM. Rodrigo has been less visible because he's been doing tons of work taking care of the internal branch, and it'd be good to have more continuity between these two worlds also on the maintainer side. 1: They all boil down to: This is going to happen sooner or later anyway, we have a great team, with the process improvements over the last few years things work rather well, now is as good as any time to do this. With that change I'll have more time for other aspects of the stack development than maintainership. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170815160101.1683-1-daniel.vetter@ffwll.ch
-
- 17 Aug, 2017 2 commits
-
-
Anusha Srivatsa authored
Cleanup the code. Map the pins in accordance to individual platforms rather than according to ports. Create separate functions for platforms. v2: - Add missing condition for CoffeeLake. Make platform specific functions static. Add function i915_ddc_pin_mapping(). v3: - Rename functions to x_port_to_ddc_pin() which directly indicates the purpose. Correct default return values on CNP and BXT. Rename i915_port_to_ to g4x_port_to since that was the first platform to run this. Correct code style. (Paulo) Sugested-by Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
Jani Nikula authored
Sometimes it would be most enlightening to debug systems by replacing the VBT to be used. For example, in the referenced bug the BIOS provides different VBT depending on the boot mode (UEFI vs. legacy). It would be interesting to try the failing boot mode with the VBT from the working boot, and see if that makes a difference. Add a module parameter to load the VBT using the firmware loader, not unlike the EDID firmware mechanism. As a starting point for experimenting, one can pick up the BIOS provided VBT from /sys/kernel/debug/dri/0/i915_opregion/i915_vbt. v2: clarify firmware load return value check (Bob) v3: kfree the loaded firmware blob References: https://bugs.freedesktop.org/show_bug.cgi?id=97822#c83Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
- 16 Aug, 2017 4 commits
-
-
Rodrigo Vivi authored
Otherwise it reuses the ilk that has a completely different wm. Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-6-rodrigo.vivi@intel.com
-
Paulo Zanoni authored
They're slightly different than the gen 9 calculations. v2: Remove TODO comment. Code matches recent spec. v3: Rebase on top of latest skl code using new fp16.16 and fixing a logic issue. Auto rebase bot has apparently made some bad decisions that changed the logic of the code. (Noticed by Manesh, updated by Rodrigo). Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:Mahesh Kumar <mahesh1.kumar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811233825.32083-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
When LSPCON support was extended to CNL one part was missed on lspcon_init. So, instead of adding check per platform on lspcon_init let's use HAS_LSPCON that is already there for that purpose. Fixes: ff15947e ("drm/i915/cnl: LSPCON support is gen9+") Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Jani Nikula authored
Ever since we've parsed VBT child devices, starting from 6acab15a ("drm/i915: use the HDMI DDI buffer translations from VBT"), we've ignored the child device information if more than one child device references the same port. The rationale for this seems lost in time. Since commit 311a2094 ("drm/i915: don't init DP or HDMI when not supported by DDI port") we started using this information more to skip HDMI/DP init if the port wasn't there per VBT child devices. However, at the same time it added port defaults without further explanation. Thus, if the child device info was skipped due to multiple child devices referencing the same port, the device info would be retrieved from the somewhat arbitrary defaults. Finally, when commit bb1d1329 ("drm/i915/vbt: split out defaults that are set when there is no VBT") stopped initializing the defaults whenever VBT is present, thus trusting the VBT more, we stopped initializing ports which were referenced by more than one child device. Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT child device blocks which cause this behaviour. Arguably they were shipped with a broken VBT. Relax the rules for multiple references to the same port, and use the first child device info to reference a port. Retain the logic to debug log about this, though. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233 Fixes: bb1d1329 ("drm/i915/vbt: split out defaults that are set when there is no VBT") Tested-by:
Oliver Weißbarth <mail@oweissbarth.de> Reported-by:
Didier G <didierg-divers@orange.fr> Reported-by:
Giles Anderson <agander@gmail.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: <stable@vger.kernel.org> # v4.12+ Reviewed-by:
-
- 15 Aug, 2017 2 commits
-
-
Rodrigo Vivi authored
Different from previous platforms, on CNL+ there's separated registers for separated indexes. v2: Remove comments regarding uncertainty around the table. v3: Remove extra line (by Ben) Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Jim Bride authored
Some fixed resolution panels actually support more than one mode, with the only thing different being the refresh rate. Having this alternate mode available to us is desirable, because it allows us to test PSR on panels whose setup time at the preferred mode is too long. With this patch we allow the use of the alternate mode if it's available and it was specifically requested. v2 and v3: Rebase v4: * Fix up some leaky mode stuff (Chris) * Rebase v5: * Fix a NULL pointer derefrence (David Weinehall) v6: * Whitespace / spelling / checkpatch clean-up; no functional change. (David) * Rebase Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
-
