- 28 Sep, 2016 3 commits
-
-
Aleksey Makarov authored
'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port Console Redirection Table) [2] as a mandatory ACPI table that specifies the configuration of serial console. Defer initialization of DT earlycon until ACPI/DT decision is made. Parse the ACPI SPCR table, setup earlycon if required, enable specified console. Thanks to Peter Hurley for explaining how this should work. [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html [2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspxSigned-off-by:
Aleksey Makarov <aleksey.makarov@linaro.org> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Tested-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
Christopher Covington <cov@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leif Lindholm authored
We have multiple "earlycon" early_param handlers - merge the DT one into the main earlycon one. It's a cleanup that also will be useful to defer setting up DT console until ACPI/DT decision is made. Rename the exported function to avoid clashing with the function from arch/microblaze/kernel/prom.c Signed-off-by:
Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Greg Kroah-Hartman authored
This reverts commit 9f12cea9. Mark writes: Unfortunately, this patch will result in erroneous stack traces on some architectures. Sorry about this; I should have verified this more thoroughly before sending the series out. Please drop the patch at your earliest convenience. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
- 27 Sep, 2016 13 commits
-
-
Kefeng Wang authored
Don't complain on -EPROBE_DEFER when attempting to get the irq. the driver probe will be retried later. Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Thor Thayer authored
The tx-threshold parameter sets the TX FIFO low water threshold trigger for the Altera 16550-FIFO32 soft IP. Signed-off-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
-
Thor Thayer authored
The Altera 16550 soft IP UART requires 2 additional registers for TX FIFO threshold support. These 2 registers enable the TX FIFO Low Watermark and set the TX FIFO Low Watermark. Set the TX FIFO threshold to the FIFO size - tx_loadsz. Signed-off-by:
-
Thor Thayer authored
Initialize the tx_loadsz parameter from passed in devicetree tx-threshold parameter. The tx_loadsz is calculated as the number of bytes to fill FIFO when tx-threshold is triggered. Signed-off-by:
-
Thor Thayer authored
Add the device tree binding needed to support the TX FIFO threshold parameter. Signed-off-by:
-
Mark Rutland authored
As noted in commit: 81539169 ("x86/dumpstack: Remove NULL task pointer convention") ... having a NULL task parameter imply current leads to subtle bugs in stack walking code (so far seen on both 86 and arm64), makes callsites harder to read, and is unnecessary as all callers have access to current. As a step towards removing the problematic NULL-implies-current idiom entirely, have the sysrq code explicitly pass current to show_stack. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Sascha Hauer authored
The USR2_DCDIN bit is tested for in register usr1. As the name suggests the usr2 register should be used instead. This fixes reading the Carrier detect status. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Fixes: 90ebc483 ("serial: imx: repair and complete handshaking") Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: <stable@vger.kernel.org> # 4.5+ Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Baoyou Xie authored
We get 2 warnings when building kernel with W=1: drivers/tty/serial/stm32-usart.c:63:5: warning: no previous prototype for 'stm32_pending_rx' [-Wmissing-prototypes] drivers/tty/serial/stm32-usart.c:88:15: warning: no previous prototype for 'stm32_get_char' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by:
-
Scott Telford authored
Add initialisation of control register and baud rate to cdns_early_console_setup(), required when running kernel standalone without a boot loader. Baud rate is only initialised when specified in earlycon command-line option, otherwise it is assumed this has been set by a boot loader. Updated Documentation/kernel-parameters.txt accordingly. Signed-off-by:
Scott Telford <stelford@cadence.com> Signed-off-by:
-
Nava kishore Manne authored
This patch Remove the unwated checks while reading the parity,framing, overrun and Break detection errors. Signed-off-by:
Nava kishore Manne <navam@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> [stelford@cadence.com: cherry picked from https://github.com/Xilinx/linux-xlnx commit b1cf74970df5470ffbc8e7876a9edf5e3498ef94] Signed-off-by:
-
Anirudha Sarangi authored
The existing interrupt handling logic has following issues. - Upon a parity error with default configuration, the control never comes out of the ISR thereby hanging Linux. - The error handling logic around framing and parity error are buggy. There are chances that the errors will never be captured. This patch ensures that the status registers are cleared on all cases so that a hang situation never arises. Signed-off-by:
Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by:
-
Arnd Bergmann authored
Building this driver with a 64-bit dma_addr_t type results in a compiler warning: drivers/tty/serial/stm32-usart.c: In function 'stm32_of_dma_rx_probe': drivers/tty/serial/stm32-usart.c:746:20: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/tty/serial/stm32-usart.c: In function 'stm32_of_dma_tx_probe': drivers/tty/serial/stm32-usart.c:818:20: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] While the type conversion here is harmless, this hints at a different problem: we pass an __iomem pointer into a DMA engine, which expects a phys_addr_t. This happens to work because stm32 has no MMU and ioremap() is an identity mapping here, but it's still an incorrect API use. Using dma_addr_t is doubly wrong here, because that would be the result of dma_map_single() rather than the physical address. Using the mapbase instead fixes multiple issues: - the warning is gone - we don't go through ioremap in error - the cast is gone, making it use the correct resource_size_t/phys_addr_t type in the process. Fixes: 34891872 ("serial: stm32: adding dma support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Gerald Baeza <gerald.baeza@st.com> Signed-off-by:
-
Alexey Starikovskiy authored
The problem with previous code was it rounded values in wrong place and produced wrong baud rate in some cases. Signed-off-by:
Alexey Starikovskiy <aystarik@gmail.com> [nicolas.ferre@atmel.com: port to newer kernel and add commit log] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
-
- 23 Sep, 2016 6 commits
-
-
Eric W. Biederman authored
In 99.99% of the cases only root in a user namespace can mount /dev/pts and in those cases the owner of /dev/pts/ptmx will remain root.root In the oddball case where someone else has CAP_SYS_ADMIN this code modifies the /dev/pts mount code to use current_fsuid and current_fsgid as the values to use when creating the /dev/ptmx inode. As is done when any other file is created. This is a code simplification, and it allows running without a root user entirely. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
devpts does not and never will have anything to sync so don't bother calling sync_filesystems on remount. Signed-off-by:
-
Eric W. Biederman authored
Signed-off-by:
-
Eric W. Biederman authored
Now that all of the work of setting up a superblock has been moved to devpts_fill_super simplify devpts_mount by calling mount_nodev instead of rolling mount_nodev by hand. Signed-off-by:
-
Eric W. Biederman authored
The code makes more sense here and things are just clearer. Signed-off-by:
-
Eric W. Biederman authored
Signed-off-by:
-
- 22 Sep, 2016 18 commits
-
-
Anirudha Sarangi authored
The patch makes changes not to enable parity error interrupt. With the current implementation, each parity error results in two distinct interrupts (almost always). The first one is normal parity error interrupt with no data in the fifo and the second one is a proper Rx interrupt with the received data in the fifo. By disabling parity error interrupt we still ensure handling of parity errors as for the Rx fifo interrupt the parity error still shows up in the interrupt status register. Considering the fact that the by default INPCK and IGNPAR are not set, this is the optimal implementation for parity error handling. Signed-off-by:
-
Alexandre TORGUE authored
Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Alexandre TORGUE authored
Signed-off-by:
-
Alexandre TORGUE authored
This patch adds dma mode support for rx and tx with pio mode as fallback in case of dma error. Signed-off-by:
-
Alexandre TORGUE authored
Signed-off-by:
-
Alexandre TORGUE authored
Keep the clock enabled at the end of stm32_init_port but disable it in stm32_serial_remove. Note that stm32_pm function is there to manage the clock at runtime. Signed-off-by:
-
Alexandre TORGUE authored
"st,hw-flow-ctrl" property is documented in device tree binding whereas "auto-flow-control" was used in the code. The driver is now aligned with the binding name "st,hw-flow-ctrl". Signed-off-by:
-
Alexandre TORGUE authored
Signed-off-by:
-
Alexandre TORGUE authored
Signed-off-by:
-
Alexandre TORGUE authored
This adds documentation of device tree bindings for the STM32 USART Signed-off-by:
Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by:
-
Alexandre TORGUE authored
Register offset management rework to support both stm32f4 (default) and stm32f7. Driver rework to ensure same functional level on both stm32f4 and stm32f7: no new feature in this version yet. Signed-off-by:
-
Nava kishore Manne authored
After issuing the reset, driver is not checking the rx and tx reset done status. So, modified driver to wait for the reset done status. Signed-off-by:
-
Nava kishore Manne authored
This patch adds RXBS register access support for zynqmp. To avoid the corner error conditions it will consider only RXBS[2:0] bits while checking the error conditions (Parity,Framing and BRAK). Signed-off-by:
-
Jiri Olsa authored
First loop in wait_for_xmitr could also trigger NMI watchdog in case reading from the port is slow: PID: 0 TASK: ffffffff819c1460 CPU: 0 COMMAND: "swapper/0" #0 [ffff88019f405e58] crash_nmi_callback at ffffffff8104d382 #1 [ffff88019f405e68] nmi_handle at ffffffff8168ead9 #2 [ffff88019f405eb0] do_nmi at ffffffff8168ec53 #3 [ffff88019f405ef0] end_repeat_nmi at ffffffff8168df13 [exception RIP: delay_tsc+50] RIP: ffffffff81325642 RSP: ffff88019f403bb0 RFLAGS: 00000083 RAX: 00000000000005c8 RBX: ffffffff81f83000 RCX: 0000024e4fb88a8b RDX: 0000024e4fb89053 RSI: 0000000000000000 RDI: 00000000000007d1 RBP: ffff88019f403bb0 R8: 000000000000000a R9: 0000000000000000 R10: 0000000000000000 R11: ffff88019f403ad6 R12: 000000000000250f R13: 0000000000000020 R14: ffffffff81d360c7 R15: 0000000000000047 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #4 [ffff88019f403bb0] delay_tsc at ffffffff81325642 #5 [ffff88019f403bb8] __const_udelay at ffffffff813255a8 #6 [ffff88019f403bc8] wait_for_xmitr at ffffffff81404390 #7 [ffff88019f403bf0] serial8250_console_putchar at ffffffff8140455c #8 [ffff88019f403c10] uart_console_write at ffffffff813ff00a #9 [ffff88019f403c40] serial8250_console_write at ffffffff814044ae #10 [ffff88019f403c88] call_console_drivers.constprop.15 at ffffffff81086b01 #11 [ffff88019f403cb0] console_unlock at ffffffff8108842f #12 [ffff88019f403ce8] vprintk_emit at ffffffff81088834 #13 [ffff88019f403d58] vprintk_default at ffffffff81088ba9 #14 [ffff88019f403d68] printk at ffffffff8167f034 Adding touch_nmi_watchdog call to the first loop as well. Reported-by:Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Jan Kiszka authored
Less magic that only requires comments. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Shawn Guo authored
Commit 0e125a5f ("tty: amba-pl011: define flag register bits for ZTE device") changes earlycon function pl011_putc() to use a pointer to uart_amba_port. This causes a regression when earlycon is enabled, because uart_amba_port is not available yet at earlycon time. Let's revert the change on pl011_putc() to fix the regression. The earlycon support for ZTE device can probably be added later by declaring a new earlycon setup function with a vendor specific compatible. Reported-by:
Sudeep Holla <sudeep.holla@arm.com> Fixes: 0e125a5f ("tty: amba-pl011: define flag register bits for ZTE device") Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Tested-by:
-
Wei Yongjun authored
Commit 5d7519df ("serial: mxs-auart: Disable clock on error path") try to disable clock on error path, but still missing the clk_set_rate() error handling path. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Adam Borowski authored
For now, these fall back to regular (dark) colors. It'd be tempting to replace blink with bright backgrounds, as permitted by CGA/VGA -- we already muck with the other programmable bit (foreground brightness vs 512 character font). This would bring vgacon in line with fbcon, which doesn't support blink anywhere but on some drivers renders that bit as bright background. If that is done, this commit should be amended to be one of ways of setting that bit. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Signed-off-by:
-
