This is our IDE Source code. This is base on kernel 2.6.28.  pata_rdc.h
and pata_rdc.c

From: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Now that Bill rewrote the driver "properly", this old thing can be removed.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is the serqt_usb driver rewritten to use usb-serial.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes some build warnings in the asus_oled driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes some build warnings in the slicoss driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes some build warnings in the altpciechdma driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

While access file_ext->state, we should use device_lock to protect it. The
original codes miss this in some places.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

schedule_work returns 0, if the work is already on the work_queue, else
returns non-zero. Do not print error message if heci_bh_handlerwork was
already on queue.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Host software could issue interrupts to ME firmware, using H_IG bit. While
Setting H_IG bit, host software should preserve all the other bits in H_CSR
unchanged. In the original function which sets H_CSR register, they first read
the register, then set some bits, and write the whole 32bits back to the
register. And that the special behavior of H_IS (write-one-to-zero) causes problem.
This patch fixes the issue in the following ways:

 - Modify heci_set_csr_register() function so that it doesn't change H_IS bit.
 - Add interface heci_csr_clear_his() to clear H_IS bit. This function is called
   after H_IS checking (dev->host_hw_state & H_IS == H_IS).
 - In original heci_csr_disable_interrupts() function, it not only clears H_IE
   bit, sometimes it also clears H_IS bit. This patch separates the two parts.
 - Avoid calling write_heci_register() function to set H_CSR register directly,
   and instead using heci_set_csr_register() function
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

- Fix typo for enum HECI_WRITE.
 - Fix timeout issue. If the time period is greater or equal 15s, it's timeout.
 - Add 10ms wait time after disconnect, to ensure that hardware is ready.
   Otherwise in the next time connection, hardware resource may be busy.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When spinlock is nested, and the outside one is spin_lock_bh, the inner
spinlock should also be spin_lock_bh, otherwise it will bring softirq-safe
to softirq-unsafe lock conversion.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

In orginal code, the device_lock and read_io_lock is mess order when nested,
which may bring dead lock. This patch unify the spinlock order of device_lock
and read_io_lock. First acquire device_lock, then read_io_lock.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When the two locks are nested, the code should always first acquire file_lock,
and then acquire device_lock in order not to generate dead-lock race.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix userspace pointer mess.
 - In memcmp(), dest and src pointer should be both in kernel space.
 - Add (void __user *) modification before userspace pointer.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The patch does copy_to/from_user related fixes

*) __copy_from/to_user is enough for user space data buffer checked by access_ok.
*) return -EFAULT if __copy_from/to_user fails.
*) Do not use memcpy to copy from user space.
Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The patch fixes the following warnings.

drivers/staging/rspiusb/rspiusb.c: In function ‘pixel_data’:
drivers/staging/rspiusb/rspiusb.c:267: warning: passing argument 1 of ‘SetPageDirty’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘UnMapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:500: warning: passing argument 1 of ‘put_page’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘MapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:662: warning: assignment makes integer from pointer without a cast
drivers/staging/rspiusb/rspiusb.c:670: warning: assignment makes integer from pointer without a cast
Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It seems that pixis_io and pixis_io2 should do the same thing.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This makes the code more readable, makes checkpatch really happy and factorize some code.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This first patch makes checkpatch happier
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Convert undefined info() function calls to dev_err, making rspiusb compile
Signed-off-by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Before all testcases, do:
	mknod /dev/caphash c 253 0
	mknod /dev/capuse c 253 1

This patch does the following:

1. caphash write of > CAP_NODE_SIZE bytes overruns node_ptr->data
	(test: cat /etc/mime.types > /dev/caphash)
2. make sure we don't dereference a NULL cap_devices[0].head
	(test: cat serge@root@abab > /dev/capuse)
3. don't let strlen dereference a NULL target_user etc
	(test: echo ab > /dev/capuse)
4. Don't leak a bunch of memory in cap_write().  Note that
   technically node_ptr is not needed for the capuse write case.
   As a result I have a much more extensive patch splitting up
   cap_write(), but I thought a smaller patch that is easier to test
   and verify would be a better start.  To test:
	cnt=0
	while [ 1 ]; do
		echo /etc/mime.types > /dev/capuse
		if [ $((cnt%25)) -eq 0 ]; then
			head -2 /proc/meminfo
		fi
		cnt=$((cnt+1))
		sleep 0.3
	done
   Without this patch, it MemFree steadily drops.  With the patch,
   it does not.

I have *not* tested this driver (with or without these patches)
with factotum or anything - only using the tests described above.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I have just had a bug fix submitted for Oslec which I have applied to
Oslec SVN. The bug can potentially stops the echo canceller adapting
after a few seconds, although it hasn't caused many problems in
practice.
Signed-off-by: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove incorrect MODULE_PARM_DESC newline.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix &&/|| typo
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Correct priority problem in the use of ! and &.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E; constant C; @@
- !E & C
+ !(E & C)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes some build warnings in the rtl8192su driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Driver from Realtek for the Realtek RTL8192 USB wifi device

Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and
others.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes some build warnings in the cpc-usb driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix this warnings:
cpc-usb_drv.c:478: warning: format '%d' expects type 'int',
	but argument 4 has type 'size_t'
cpc-usb_drv.c:1034: warning: format '%d' expects type 'int',
	but argument 3 has type 'long unsigned int'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix this build error when PROC_FS is not enabled:
cpc-usb_drv.c:61:2: error: #error "PROCFS needed"
cpc-usb_drv.c:1159: error: implicit declaration of function 'proc_mkdir'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Since card must already be non-NULL, it seems that what was intended
was to test the result of kmalloc.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E,E1;
identifier f,fld,fld1;
statement S1,S2;
@@

E->fld = f(...);
... when != E = E1
    when != E->fld1 = E1
if (
-   E
+   E->fld
           == NULL) S1 else S2
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

List what needs to be done to get this driver merged into
the main part of the kernel tree.

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes most of the coding style issues in sja2m16c.h

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This resolves the checkpatch errors in cpc-usb_drv.c

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds the cpc-usb driver to the kernel build

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It will now build properly on the latest kernel tree.

Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a CPC CAN USB driver.

Just some comments:
cpcusb.h and cpc-usb_drv.c: Essential driver source code
sja2m16c_2.c: Helper for converting bitrate timings
cpc.h: Structures and definition needed to communicate with the device

From: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>