- 18 Oct, 2013 25 commits
-
-
Al Viro authored
commit 118b2302 upstream. dynamic_dname() is both too much and too little for those - the output may be well in excess of 64 bytes dynamic_dname() assumes to be enough (thanks to ashmem feeding really long names to shmem_file_setup()) and vsnprintf() is an overkill for those guys. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Colin Cross <ccross@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Henningsson authored
This is a backport for stable. The original commit SHA is 338cae56. On this machine, DAC on node 0x03 seems to give mono output. Also, it needs additional patches for headset mic support. It supports CTIA style headsets only. Alsa-info available at the bug link below. BugLink: https://bugs.launchpad.net/bugs/1236228Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ingo Molnar authored
commit 3f0116c3 upstream. Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto' constructs, as outlined here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 Implement a workaround suggested by Jakub Jelinek. Reported-and-tested-by:
Fengguang Wu <fengguang.wu@intel.com> Reported-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Suggested-by:
Jakub Jelinek <jakub@redhat.com> Reviewed-by:
Richard Henderson <rth@twiddle.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20131015062351.GA4666@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 8612ed0d upstream. Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Cc: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Vineet Gupta authored
commit 5b242828 upstream. ARCompact TRAP_S insn used for breakpoints, commits before exception is taken (updating architectural PC). So ptregs->ret contains next-PC and not the breakpoint PC itself. This is different from other restartable exceptions such as TLB Miss where ptregs->ret has exact faulting PC. gdb needs to know exact-PC hence ARC ptrace GETREGSET provides for @stop_pc which returns ptregs->ret vs. EFA depending on the situation. However, writing stop_pc (SETREGSET request), which updates ptregs->ret doesn't makes sense stop_pc doesn't always correspond to that reg as described above. This was not an issue so far since user_regs->ret / user_regs->stop_pc had same value and both writing to ptregs->ret was OK, needless, but NOT broken, hence not observed. With gdb "jump", they diverge, and user_regs->ret updating ptregs is overwritten immediately with stop_pc, which this patch fixes. Reported-by:
Anton Kolesov <akolesov@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Christian Ruppert authored
commit 10469350 upstream. Previously, when a signal was registered with SA_SIGINFO, parameters 2 and 3 of the signal handler were written to registers r1 and r2 before the register set was saved. This led to corruption of these two registers after returning from the signal handler (the wrong values were restored). With this patch, registers are now saved before any parameters are passed, thus maintaining the processor state from before signal entry. Signed-off-by:
Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by:
-
Vineet Gupta authored
commit 6c00350b upstream. Some ARC SMP systems lack native atomic R-M-W (LLOCK/SCOND) insns and can only use atomic EX insn (reg with mem) to build higher level R-M-W primitives. This includes a SystemC based SMP simulation model. So rwlocks need to use a protecting spinlock for atomic cmp-n-exchange operation to update reader(s)/writer count. The spinlock operation itself looks as follows: mov reg, 1 ; 1=locked, 0=unlocked retry: EX reg, [lock] ; load existing, store 1, atomically BREQ reg, 1, rety ; if already locked, retry In single-threaded simulation, SystemC alternates between the 2 cores with "N" insn each based scheduling. Additionally for insn with global side effect, such as EX writing to shared mem, a core switch is enforced too. Given that, 2 cores doing a repeated EX on same location, Linux often got into a livelock e.g. when both cores were fiddling with tasklist lock (gdbserver / hackbench) for read/write respectively as the sequence diagram below shows: core1 core2 -------- -------- 1. spin lock [EX r=0, w=1] - LOCKED 2. rwlock(Read) - LOCKED 3. spin unlock [ST 0] - UNLOCKED spin lock [EX r=0,w=1] - LOCKED -- resched core 1---- 5. spin lock [EX r=1] - ALREADY-LOCKED -- resched core 2---- 6. rwlock(Write) - READER-LOCKED 7. spin unlock [ST 0] 8. rwlock failed, retry again 9. spin lock [EX r=0, w=1] -- resched core 1---- 10 spinlock locked in #9, retry #5 11. spin lock [EX gets 1] -- resched core 2---- ... ... The fix was to unlock using the EX insn too (step 7), to trigger another SystemC scheduling pass which would let core1 proceed, eliding the livelock. Signed-off-by:
-
Vineet Gupta authored
commit 0752adfd upstream. Anton reported | LTP tests syscalls/process_vm_readv01 and process_vm_writev01 fail | similarly in one testcase test_iov_invalid -> lvec->iov_base. | Testcase expects errno EFAULT and return code -1, | but it gets return code 1 and ERRNO is 0 what means success. Essentially test case was passing a pointer of -1 which access_ok() was not catching. It was doing [@addr + @sz <= TASK_SIZE] which would pass for @addr == -1 Fixed that by rewriting as [@addr <= TASK_SIZE - @sz] Reported-by:
Anton Kolesov <Anton.Kolesov@synopsys.com> Signed-off-by:
-
Mischa Jonker authored
commit c11eb222 upstream. If a load or store is the last instruction in a zero-overhead-loop, and it's misaligned, the loop would execute only once. This fixes that problem. Signed-off-by:
Mischa Jonker <mjonker@synopsys.com> Signed-off-by:
-
Mischa Jonker authored
commit 7efd0da2 upstream. Cast usecs to u64, to ensure that the (usecs * 4295 * HZ) multiplication is 64 bit. Initially, the (usecs * 4295 * HZ) part was done as a 32 bit multiplication, with the result casted to 64 bit. This led to some bits falling off, causing a "DMA initialization error" in the stmmac Ethernet driver, due to a premature timeout. Signed-off-by:
-
Noam Camus authored
commit c3567f8a upstream. Commit 05b016ec "ARC: Setup Vector Table Base in early boot" moved the Interrupt vector Table setup out of arc_init_IRQ() which is called for all CPUs, to entry point of boot cpu only, breaking booting of others. Fix by adding the same to entry point of non-boot CPUs too. read_arc_build_cfg_regs() printing IVT Base Register didn't help the casue since it prints a synthetic value if zero which is totally bogus, so fix that to print the exact Register. [vgupta: Remove the now stale comment from header of arc_init_IRQ and also added the commentary for halt-on-reset] Cc: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
Noam Camus <noamc@ezchip.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vineet Gupta authored
commit 05b016ec upstream. Otherwise early boot exceptions such as instructions errors due to configuration mismatch between kernel and hardware go off to la-la land, as opposed to hitting the handler and panic()'ing properly. Signed-off-by:
-
Russell King authored
commit 1d0bbf42 upstream. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Helge Deller authored
commit 59b33f14 upstream. Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The problem is, that in print_worker_info() we try to read the workqueue info via the probe_kernel_read() functions which use pagefault_disable() to avoid crashes like this: probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq)); probe_kernel_read(&wq, &pwq->wq, sizeof(wq)); probe_kernel_read(name, wq->name, sizeof(name) - 1); The problem here is, that the first probe_kernel_read(&pwq) might return zero in pwq and as such the following probe_kernel_reads() try to access contents of the page zero which is read protected and generate a kernel segfault. With this patch we fix the interruption handler to call parisc_terminate() directly only if pagefault_disable() was not called (in which case preempt_count()==0). Otherwise we hand over to the pagefault handler which will try to look up the faulting address in the fixup tables. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Paul Mackerras authored
commit cfc86025 upstream. This fixes a typo in the code that saves the guest DSCR (Data Stream Control Register) into the kvm_vcpu_arch struct on guest exit. The effect of the typo was that the DSCR value was saved in the wrong place, so changes to the DSCR by the guest didn't persist across guest exit and entry, and some host kernel memory got corrupted. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Dave Jones authored
commit 6e4ea8e3 upstream. If we take the 2nd retry path in ext4_expand_extra_isize_ea, we potentionally return from the function without having freed these allocations. If we don't do the return, we over-write the previous allocation pointers, so we leak either way. Spotted with Coverity. [ Fixed by tytso to set is and bs to NULL after freeing these pointers, in case in the retry loop we later end up triggering an error causing a jump to cleanup, at which point we could have a double free bug. -- Ted ] Signed-off-by:
Dave Jones <davej@fedoraproject.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Josef Bacik authored
commit 4871c158 upstream. btrfs_rename was using the root of the old dir instead of the root of the new dir when checking for a hash collision, so if you tried to move a file into a subvol it would freak out because it would see the file you are trying to move in its current root. This fixes the bug where this would fail btrfs subvol create test1 btrfs subvol create test2 mv test1 test2. Thanks to Chris Murphy for catching this, Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Henrik Rydberg authored
commit 25f2bd7f upstream. The crash reported and investigated in commit 5f4513 turned out to be caused by a change to the read interface on newer (2012) SMCs. Tests by Chris show that simply reading the data valid line is enough for the problem to go away. Additional tests show that the newer SMCs no longer wait for the number of requested bytes, but start sending data right away. Apparently the number of bytes to read is no longer specified as before, but instead found out by reading until end of data. Failure to read until end of data confuses the state machine, which eventually causes the crash. As a remedy, assuming bit0 is the read valid line, make sure there is nothing more to read before leaving the read function. Tested to resolve the original problem, and runtested on MBA3,1, MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on machines before 2012. Tested-by:
Chris Murphy <chris@cmurf.com> Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
Taras Kondratiuk authored
commit 4cdbf7d3 upstream. Initially commit cb527ede "i2c-omap: Double clear of ARDY status in IRQ handler" added a workaround for undocumented errata ProDB0017052. But then commit 1d7afc95 "i2c: omap: ack IRQ in parts" refactored code and missed one of ARDY clearings. So current code violates errata. It causes often i2c bus timeouts on my Pandaboard. This patch adds a second clearing in place. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Linus Torvalds authored
commit 9d05746e upstream. Olga reported that file descriptors opened with O_PATH do not work with fstatfs(), found during further development of ksh93's thread support. There is no reason to not allow O_PATH file descriptors here (fstatfs is very much a path operation), so use "fdget_raw()". See commit 55815f70 ("vfs: make O_PATH file descriptors usable for 'fstat()'") for a very similar issue reported for fstat() by the same team. Reported-and-tested-by:
ольга крыжановская <olga.kryzhanovska@gmail.com> Acked-by:
-
Theodore Ts'o authored
commit 47d06e53 upstream. The some platforms (e.g., ARM) initializes their clocks as late_initcalls for some unknown reason. So make sure random_int_secret_init() is run after all of the late_initcalls are run. Signed-off-by:
-
David Henningsson authored
commit 88cfcf86 upstream. The external mic showed up with a precense detect of "always present", essentially disabling the internal mic. Therefore turn off presence detection for this pin. Note: The external mic seems not yet working, but an internal mic is certainly better than no mic at all. BugLink: https://bugs.launchpad.net/bugs/1227093Signed-off-by:
-
Takashi Iwai authored
commit c6cc3d58 upstream. ASUS N56VZ needs a fixup for the bass speaker pin, which was already provided via model=asus-mode4. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=841645Signed-off-by:
-
Anssi Hannula authored
commit 39edac70 upstream. Currently hdmi_setup_audio_infoframe() reprograms the HDA channel mapping only when the infoframe is not up-to-date or the non-PCM flag has changed. However, when just the channel map has been changed, the infoframe may still be up-to-date and non-PCM flag may not have changed, so the new channel map is not actually programmed into the HDA codec. Notably, this failing case is also always triggered when the device is already in a prepared state and a new channel map is configured while changing only the channel positions (for example, plain "speaker-test -c2 -m FR,FL"). Fix that by always programming the channel map in hdmi_setup_audio_infoframe(). Tested on Intel HDMI. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
-
Daniel Mack authored
commit a9d14bc0 upstream. The frame check in i_usX2Y_urb_complete() and i_usX2Y_usbpcm_urb_complete() is bogus and produces false positives as described in this LAU thread: http://linuxaudio.org/mailarchive/lau/2013/5/20/200177 This patch removes the check code entirely. Cc: fzu@wemgehoertderstaat.de Reported-by:
Dr Nicholas J Bailey <nicholas.bailey@glasgow.ac.uk> Suggested-by:
Daniel Mack <zonque@gmail.com> Signed-off-by:
-
- 13 Oct, 2013 15 commits
-
-
Greg Kroah-Hartman authored
-
Kent Overstreet authored
commit 2fe80d3b upstream. Commit c0f04d88 ("bcache: Fix flushes in writeback mode") was fixing a reported data corruption bug, but it seems some last minute refactoring or rebasing introduced a null pointer deref. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Reported-by:
Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by:
-
Bjørn Mork authored
commit 0470667c upstream. Adding the device list from the Windows driver description files included with a new Qualcomm MDM9615 based device, "Alcatel-sbell ASB TL131 TDD LTE", from China Mobile. This device is tested and verified to work. The others are assumed to work based on using the same Windows driver. Many of these devices support multiple QMI/wwan ports, requiring multiple interface matching entries. All devices are composite, providing a mix of one or more serial, storage or Android Debug Brigde functions in addition to the wwan function. This device list included an update of one previously known device, which was incorrectly assumed to have a Gobi 2K layout. This is corrected. Reported-by:
王康 <scateu@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Herrmann authored
commit 19872d20 upstream. udev has this nice feature of creating "dead" /dev/<node> device-nodes if it finds a devnode:<node> modalias. Once the node is accessed, the kernel automatically loads the module that provides the node. However, this requires udev to know the major:minor code to use for the node. This feature was introduced by: commit 578454ff Author: Kay Sievers <kay.sievers@vrfy.org> Date: Thu May 20 18:07:20 2010 +0200 driver core: add devname module aliases to allow module on-demand auto-loading However, uhid uses dynamic minor numbers so this doesn't actually work. We need to load uhid to know which minor it's going to use. Hence, allocate a static minor (just like uinput does) and we're good to go. Reported-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Marcel Holtmann authored
commit 60cbd53e upstream. For simple device node creation, add the devname module alias. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Reviewed-by:
-
Stefan Achatz authored
commit a4be0ed3 upstream. KonePureOptical is a KonePure with different sensor. Signed-off-by:
Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by:
-
Josef Bacik authored
commit b8d0c69b upstream. A user was reporting weird warnings from btrfs_put_delayed_ref() and I noticed that we were doing this list_del_init() on our head ref outside of delayed_refs->lock. This is a problem if we have people still on the list, we could end up modifying old pointers and such. Fix this by removing us from the list before we do our run_delayed_ref on our head ref. Thanks, Signed-off-by:
-
Josef Bacik authored
commit a0525414 upstream. We have logic to see if we've already created a parent directory by check to see if an inode inside of that directory has a lower inode number than the one we are currently processing. The logic is that if there is a lower inode number then we would have had to made sure the directory was created at that previous point. The problem is that subvols inode numbers count from the lowest objectid in the root tree, which may be less than our current progress. So just skip if our dir item key is a root item. This fixes the original test and the xfstest version I made that added an extra subvol create. Thanks, Reported-by:
Emil Karlson <jekarlson@gmail.com> Signed-off-by:
-
Josef Bacik authored
commit b6c60c80 upstream. Previously we only added blocks to the list to have their backrefs checked if the level of the block is right above the one we are searching for. This is because we want to make sure we don't add the entire path up to the root to the lists to make sure we process things one at a time. This assumes that if any blocks in the path to the root are going to be not checked (shared in other words) then they will be in the level right above the current block on up. This isn't quite right though since we can have blocks higher up the list that are shared because they are attached to a reloc root. But we won't add this block to be checked and then later on we will BUG_ON(!upper->checked). So instead keep track of wether or not we've queued a block to be checked in this current search, and if we haven't go ahead and queue it to be checked. This patch fixed the panic I was seeing where we BUG_ON(!upper->checked). Thanks, Signed-off-by:
-
Martin Schwidefsky authored
commit dbbfe487 upstream. Git commit 61649881 "s390: system call path micro optimization" introduced a regression in regard to system call restarting and inferior function calls via the ptrace interface. The pointer to the system call table needs to be loaded in sysc_sigpending if do_signal returns with TIF_SYSCALl set after it restored a system call context. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Chris Metcalf authored
commit f862eefe upstream. It turns out the kernel relies on barrier() to force a reload of the percpu offset value. Since we can't easily modify the definition of barrier() to include "tp" as an output register, we instead provide a definition of __my_cpu_offset as extended assembly that includes a fake stack read to hazard against barrier(), forcing gcc to know that it must reread "tp" and recompute anything based on "tp" after a barrier. This fixes observed hangs in the slub allocator when we are looping on a percpu cmpxchg_double. A similar fix for ARMv7 was made in June in change 509eb76e. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Takashi Iwai authored
commit 4a437044 upstream. Acer Aspire 3830TG seems requiring GPIO bit 0 as the primary mute control. When a machine is booted after Windows 8, the GPIO pin is turned off and it results in the silent output. This patch adds the manual fixup of GPIO bit 0 for this model. Reported-by:
Christopher <DIDI2002@web.de> Signed-off-by:
-
Ben Skeggs authored
commit 5495e39f upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Mark Tinguely authored
commit 997def25 upstream. Commit f5ea1100 cleans up the disk to host conversions for node directory entries, but because a variable is reused in xfs_node_toosmall() the next node is not correctly found. If the original node is small enough (<= 3/8 of the node size), this change may incorrectly cause a node collapse when it should not. That will cause an assert in xfstest generic/319: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: /root/newest/xfs/fs/xfs/xfs_trans_buf.c, line: 569 Keep the original node header to get the correct forward node. (When a node is considered for a merge with a sibling, it overwrites the sibling pointers of the original incore nodehdr with the sibling's pointers. This leads to loop considering the original node as a merge candidate with itself in the second pass, and so it incorrectly determines a merge should occur.) [v3: added Dave Chinner's (slightly modified) suggestion to the commit header, cleaned up whitespace. -bpm] Signed-off-by:
Mark Tinguely <tinguely@sgi.com> Reviewed-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Lv Zheng authored
commit 06a8566b upstream. This patch fixes the issues indicated by the test results that ipmi_msg_handler() is invoked in atomic context. BUG: scheduling while atomic: kipmi0/18933/0x10000100 Modules linked in: ipmi_si acpi_ipmi ... CPU: 3 PID: 18933 Comm: kipmi0 Tainted: G AW 3.10.0-rc7+ #2 Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.0027.070120100606 07/01/2010 ffff8838245eea00 ffff88103fc63c98 ffffffff814c4a1e ffff88103fc63ca8 ffffffff814bfbab ffff88103fc63d28 ffffffff814c73e0 ffff88103933cbd4 0000000000000096 ffff88103fc63ce8 ffff88102f618000 ffff881035c01fd8 Call Trace: <IRQ> [<ffffffff814c4a1e>] dump_stack+0x19/0x1b [<ffffffff814bfbab>] __schedule_bug+0x46/0x54 [<ffffffff814c73e0>] __schedule+0x83/0x59c [<ffffffff81058853>] __cond_resched+0x22/0x2d [<ffffffff814c794b>] _cond_resched+0x14/0x1d [<ffffffff814c6d82>] mutex_lock+0x11/0x32 [<ffffffff8101e1e9>] ? __default_send_IPI_dest_field.constprop.0+0x53/0x58 [<ffffffffa09e3f9c>] ipmi_msg_handler+0x23/0x166 [ipmi_si] [<ffffffff812bf6e4>] deliver_response+0x55/0x5a [<ffffffff812c0fd4>] handle_new_recv_msgs+0xb67/0xc65 [<ffffffff81007ad1>] ? read_tsc+0x9/0x19 [<ffffffff814c8620>] ? _raw_spin_lock_irq+0xa/0xc [<ffffffffa09e1128>] ipmi_thread+0x5c/0x146 [ipmi_si] ... Also Tony Camuso says: We were getting occasional "Scheduling while atomic" call traces during boot on some systems. Problem was first seen on a Cisco C210 but we were able to reproduce it on a Cisco c220m3. Setting CONFIG_LOCKDEP and LOCKDEP_SUPPORT to 'y' exposed a lockdep around tx_msg_lock in acpi_ipmi.c struct acpi_ipmi_device. ================================= [ INFO: inconsistent lock state ] 2.6.32-415.el6.x86_64-debug-splck #1 --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/3/17 [HC0[0]:SC1[1]:HE1:SE0] takes: (&ipmi_device->tx_msg_lock){+.?...}, at: [<ffffffff81337a27>] ipmi_msg_handler+0x71/0x126 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810ba11c>] __lock_acquire+0x63c/0x1570 [<ffffffff810bb0f4>] lock_acquire+0xa4/0x120 [<ffffffff815581cc>] __mutex_lock_common+0x4c/0x400 [<ffffffff815586ea>] mutex_lock_nested+0x4a/0x60 [<ffffffff8133789d>] acpi_ipmi_space_handler+0x11b/0x234 [<ffffffff81321c62>] acpi_ev_address_space_dispatch+0x170/0x1be The fix implemented by this change has been tested by Tony: Tested the patch in a boot loop with lockdep debug enabled and never saw the problem in over 400 reboots. Reported-and-tested-by:
Tony Camuso <tcamuso@redhat.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Reviewed-by:
Huang Ying <ying.huang@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
