- 21 Mar, 2006 40 commits
-
-
Michael Krufky authored
- removed VIDEO_AUDIO_DECODER Kconfig menu item. VIDEO_MSP3400, VIDEO_CS53L32A and VIDEO_WM8775 now each have their own menu items. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- created Kconfig item, VIDEO_CS53L32A, for the cs53l32a module which supports the Cirrus Logic CS53L32A Low Voltage Stereo A/D Converter. - created Kconfig item, VIDEO_WM8775, for the wm8775 module which supports the Wolfson Microelectronics WM8775 high performance stereo A/D Converter. Signed-off-by:
-
Michael Krufky authored
- Corrected typo for NxtWave NXT200X - Added "Oren" manufacturer name to menu items for OR51132 and OR51211 - Removed "(pcHDTV HDx000 card)" from Oren frontends menu item names, This isn't necessary, as these frontends are selected by the card drivers, build configuration (DVB_BT8XX and VIDEO_CX88_DVB). Signed-off-by:
-
Adrian Bunk authored
CONFIG_VIDEO_CPIA2=y, CONFIG_USB=n results in the following compile <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o: In function `set_alternate':cpia2_usb.c:(.text+0x443aa2): undefined reference to `usb_set_interface' drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_alloc_urb' drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_submit_urb' drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_kill_urb' drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_free_urb' drivers/built-in.o: In function `cpia2_usb_disconnect':cpia2_usb.c:(.text+0x443e14): undefined reference to `usb_driver_release_interface' drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg' drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg' drivers/built-in.o: In function `cpia2_usb_complete':cpia2_usb.c:(.text+0x444836): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `cpia2_usb_cleanup': undefined reference to `usb_deregister' drivers/built-in.o: In function `cpia2_usb_init': undefined reference to `usb_register_driver' Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Michael Krufky authored
- removed VIDEO_DECODER Kconfig menu item. VIDEO_CX25840, VIDEO_SAA711X and VIDEO_SAA7127 now each have their own menu items. Signed-off-by:
-
Michael Krufky authored
- created Kconfig menu item, VIDEO_SAA711X, for the saa7115 module, which supports SAA7113, SAA7114 and SAA7115 video decoders. Signed-off-by:
-
Michael Krufky authored
The msp3400 driver is currently only being built if the bttv driver is selected. There are new drivers that will be needing msp3400, so simply including msp3400 in the Makefile is no longer appropriate. This patch creates VIDEO_MSP3400, and alters VIDEO_BT848, VIDEO_PVRUSB2 and VIDEO_AUDIO_DECODER each to select VIDEO_MSP3400. Signed-off-by:
-
Mauro Carvalho Chehab authored
V4L2_STD_PAL define is not correct. It specifies only 50Hz PAL standards. This patch fixes saa7113 color config for other PAL video standards. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This patch makes chroma standard selection based at possible values, according with datasheet. Signed-off-by: -
Mauro Carvalho Chehab authored
Now, em28xx uses saa7115 instead of saa711x. saa7115 driver is capable of handling saa 7113, 7114 and 7115. Signed-off-by: -
Adrian Bunk authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Markus Rechberger authored
Detaching the device didn't clean up several device files in /dev/dvb, after applying that patch all dvb devices disappeared as expected. Signed-off-by:
Markus Rechberger <mrechberger@gmail.com> Signed-off-by:
-
Michael Krufky authored
The device, Medion 7134, has two saa7134 chips on it, but only one of them is functional in the current saa7134 driver. This patch adds autodetection for the second, unsupported saa7134 chip, as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user (in dmesg) indicating that the second chip isn't yet functional. This is useful for users, since two instances of the saa7134 driver will spawn. This patch will prevent confusion by warning the user that only one of the chips on the board are functional. There are other versions of the SAA7134_BOARD_MD7134 with only a single saa7134 bridge/decoder -- those devices will not be affected by this patch. Only devices containing the second chip will display the warning. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
There are already some supported devices that contain two saa713x chips on-board, where only one of these chips is currently functional in the driver. We are already printing a warning message for the second saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This patch alters that case to make it generic, so that other cards in the same situation can use it. Signed-off-by:
-
Andreas Oberritter authored
Use dvb_ringbuffer instead of an own buffer implementation in dmxdev.[ch]. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Andreas Oberritter authored
Oliver Endriss spotted, that resetting read and write pointers on flush() requires additional locking and breaks the av7110 driver. Therefore this patch partially reverts the previous patch titled "make dvb_ringbuffer compatible to dmxdev_buffer". Signed-off-by:
-
Mauro Carvalho Chehab authored
Coverity reported a bug at checking max number of supported boards by em28xx init code. Signed-off-by: -
Michael Krufky authored
VIDEO_MXB selects VIDEO_TUNER, so we don't have to include tuner.o in the Makefile. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
The cx25840 module requires external firmware in order to function, so it must select FW_LOADER, but saa7115 and saa7129 do not require it. This patch creates VIDEO_CX25840, and alters VIDEO_DECODER to select it. Signed-off-by:
-
Duncan Sands authored
If the call to cx88_core_get returns a NULL value, it is dereferenced by cx88_reset, and perhaps by cx88_core_put. Spotted by the Coverity checker. Signed-off-by:
Duncan Sands <baldrick@free.fr> Signed-off-by:
-
Eric Sesterhenn authored
Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
-
Andreas Oberritter authored
Added variable 'error' to struct dvb_ringbuffer, which is set to zero on init() and flush(). Also reset read an write pointers to zero on flush() to get less fragmented data. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Marcin Rudowski authored
This patch fixes default values for some picture controls: - brightness set to 50% by default (now is 0%) - hue set to 50% by default (now is 0%) - sets saturation to datasheet value - volume set to 0dB (now is -32dB) and some left small fixes: - twice offset adding - balance didn't follow datasheet (bits[0:5] = attenuation; bit[6] = channel to provide attenuation) Signed-off-by:
Marcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by:
Ian Pickworth <ian@pickworth.me.uk> Signed-off-by:
-
Matheus Izvekov authored
This patch adds support for the IR remote control found in the card CX88_BOARD_PROLINK_PLAYTVPVR. Signed-off-by:
Matheus Izvekov <mizvekov@gmail.com> Signed-off-by:
-
Matheus Izvekov authored
This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR to the ones observed using RegSpy from the dscaler project. Signed-off-by:
-
Rickard Osser authored
- Added support for AVerMedia A169 Dual Analog tuner card (dual saa7134 decoders - only 1 working right now) - Added autodetection for both parts of the card. It shows up like 2 cards, B1 and B - Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO, FIXME: B is more or less dead at this point and I suspect the FM-radio is on the B part of the board Signed-off-by:
Rickard Osser <ricky@osser.se> Signed-off-by:
-
Michael Krufky authored
- added tuner_lg_taln_pal_secam_ranges - renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN - updated FlyTV mini Asus Digimatrix with new tuner Thanks-to: Rickard Osser <ricky@osser.se> Signed-off-by:
-
Michael Krufky authored
- matched indents on quotes within a printk Signed-off-by:
-
Michael Krufky authored
- added missing "count" element in Thomson FE6600 Signed-off-by:
-
Mauro Carvalho Chehab authored
Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: -
Andreas Oberritter authored
Used Lindent, manually changed some line breaks. Removed invalid email addresses, useless casts and useless initialization of return values. Signed-off-by:
-
Andreas Oberritter authored
Rename 'enum dmxdevype' to 'enum dmxdev_type' and use this enum instead of int for the member 'type' of struct dmxdev_filter. Signed-off-by:
-
Andreas Oberritter authored
The member dvbdev gets initialized once but is never used after that. Signed-off-by:
-
Andreas Oberritter authored
The PID value is already stored in struct dmx_sct_filter_params which is a member of struct dmxdev_filter. Acked-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Marcin Rudowski authored
Old values generally works in A2 mono, but new ones allows: - detect and use Nicam stereo - mute in tv - use radio FM Signed-off-by:
-
Mauro Carvalho Chehab authored
Also Removed whitespaces introduced by previous tena patch Signed-off-by:
-
