- 23 Jul, 2020 3 commits
-
-
Geert Uytterhoeven authored
"K" stands for "kelvin". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200618080212.16560-1-geert+renesas@glider.be
-
Anson Huang authored
Allows building and compile-testing the i.MX TPM driver for ARM64. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Enable clock event handling on per CPU core basis. Make sure that interrupts raised on the first core execute event handlers on the correct CPU core. This driver is required by Ingenic processors that support SMP/SMT, such as JZ4780 and X2000. Tested-by:
H. Nikolaus Schaller <hns@goldelico.com> Tested-by:
Paul Boddie <paul@boddie.org.uk> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
-
- 11 Jul, 2020 9 commits
-
-
Alexandre Belloni authored
The first divisor for the sama5d2 is actually the gclk selector. Because the currently remaining divisors are fitting the use case, currently ensure it is skipped. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
The divider selection algorithm never allowed to get index 0. It was also continuing to look for dividers, trying to find the slow clock selection. This is not necessary anymore. Signed-off-by:
-
Alexandre Belloni authored
Stop using the slow clock as the clock source for 32 bit counters because even at 10MHz, they are able to handle delays up to two minutes. This provides a way better resolution. Signed-off-by:
-
Alexandre Belloni authored
Use the tcb_config and struct atmel_tcb_config to get the timer counter width. This is necessary because atmel_tcb_config will be extended later on. Signed-off-by:
-
Alexandre Belloni authored
On all the supported SoCs, the slow clock is always ATMEL_TC_TIMER_CLOCK5, avoid looking it up and pass it directly to setup_clkevents. Signed-off-by:
-
Kamel Bouhara authored
Some atmel socs have extra tcb capabilities that allow using a generic clock source or enabling a quadrature decoder. Signed-off-by:
Kamel Bouhara <kamel.bouhara@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
The sama5d2 tcbs take an extra input clock, their gclk. Signed-off-by:
-
Alexandre Belloni authored
The sama5d2 TC block TIMER_CLOCK1 is different from the at91sam9x5 one. Instead of being MCK / 2, it is the TCB GCLK. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alexandre Belloni authored
Convert Atmel Timer Counter Blocks bindings to DT schema format using json-schema. Also move it out of mfd as it is not and has never been related to mfd. Signed-off-by:
-
- 22 May, 2020 19 commits
-
-
Geert Uytterhoeven authored
Document Device Tree bindings for the Renesas EMMA Mobile System Timer. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Saravana Kannan authored
The commit 4f41fe38 ("clocksource/drivers/timer-probe: Avoid creating dead devices") broke the handling of arm,vexpress-sysreg [1]. The arm,vexpress-sysreg device is handled by both timer-versatile.c and drivers/mfd/vexpress-sysreg.c. While the timer driver doesn't use the device, the mfd driver still needs a device to probe. So, this patch clears the OF_POPULATED flag to continue creating the device. [1] - https://lore.kernel.org/lkml/20200324175955.GA16972@arm.com/ Fixes: 4f41fe38 ("clocksource/drivers/timer-probe: Avoid creating dead devices") Signed-off-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
-
Serge Semin authored
Currently clocksource framework doesn't support the clocks with variable frequency. Since MIPS GIC timer ticks rate might be unstable on some platforms, we must make sure that it justifies the clocksource requirements. MIPS GIC timer is incremented with the CPU cluster reference clocks rate. So in case if CPU frequency changes, the MIPS GIC tick rate changes synchronously. Due to this the clocksource subsystem can't rely on the timer to measure system clocks anymore. This commit marks the MIPS GIC based clocksource as unstable if reference clock (normally it's a CPU reference clocks) rate changes. The clocksource will execute a watchdog thread, which lowers the MIPS GIC timer rating to zero and fallbacks to a new stable one. Note we don't need to set the CLOCK_SOURCE_MUST_VERIFY flag to the MIPS GIC clocksource since normally the timer is stable. The only reason why it gets unstable is due to the ref clock rate change, which event we detect here in the driver by means of the clocks event notifier. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by:
-
Paul Burton authored
The MIPS GIC timer is well suited for use as sched_clock, so register it as such. Whilst the existing gic_read_count() function matches the prototype needed by sched_clock_register() already, we split it into 2 functions in order to remove the need to evaluate the mips_cm_is64 condition within each call since sched_clock should be as fast as possible. Note the sched clock framework needs the clock source being stable in order to rely on it. So we register the MIPS GIC timer as schedule clocks only if it's, if either the system doesn't have CPU-frequency enabled or the CPU frequency is changed by means of the CPC core clock divider available on the platforms with CM3 or newer. Signed-off-by:
Paul Burton <paulburton@kernel.org> Co-developed-by:
-
Serge Semin authored
Commit 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") replaced a publicly available driver initialization method with one called by the timer_probe() method available after CLKSRC_OF. In current implementation it traverses all the timers available in the system and calls their initialization methods if corresponding devices were either in dtb or in acpi. But if before the commit any number of available timers would be installed as clockevent and clocksource devices, after that there would be at most two. The rest are just ignored since default case branch doesn't do anything. I don't see a reason of such behaviour, neither the commit message explains it. Moreover this might be wrong if on some platforms these timers might be used for different purpose, as virtually CPU-local clockevent timers and as an independent broadcast timer. So in order to keep the compatibility with the platforms where the order of the timers detection has some meaning, lets add the secondly discovered timer to be of clocksource/sched_clock type, while the very first and the others would provide the clockevents service. Fixes: 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") Signed-off-by:
-
Serge Semin authored
Currently any DW APB Timer device detected in OF is bound to CPU #0. Doing so is redundant since DW APB Timer isn't CPU-local timer, but as having APB interface is normally accessible from any CPU in the system. By artificially affiliating the DW timer to the very first CPU we may and in our case will make the clockevent subsystem to decline the more performant real CPU-local timers selection in favor of in fact non-local and accessible over a slow bus - DW APB Timers. Let's not affiliate the of-detected DW APB Timers to any CPU. By doing so the clockevent framework would prefer to select the real CPU-local timer instead of DW APB one. Otherwise if there is no other than DW APB device for clockevents tracking then it will be selected. Signed-off-by:
-
Serge Semin authored
Currently the DW APB Timer driver binds each clockevent timers to a particular CPU. This isn't good for multiple reasons. First of all seeing the device is placed on APB bus (which makes it accessible from any CPU core), accessible over MMIO and having the DYNIRQ flag set we can be sure that manually binding the timer to any CPU just isn't correct. By doing so we just set an extra limitation on device usage. This also doesn't reflect the device actual capability, since by setting the IRQ affinity we can make it virtually local to any CPU. Secondly imagine if you had a real CPU-local timer with the same rating and the same CPU-affinity. In this case if DW APB timer was registered first, then due to the clockevent framework tick-timer selection procedure we'll end up with the real CPU-local timer being left unselected for clock-events tracking. But on most of the platforms (MIPS/ARM/etc) such timers are normally embedded into the CPU core and are accessible with much better performance then devices placed on APB. For instance in MIPS architectures there is r4k-timer, which is CPU-local, assigned with the same rating, and normally its clockevent device is registered after the platform-specific one. So in order to fix all of these issues let's make the DW APB Timer CPU affinity being optional and deactivated by passing a negative CPU id, which will effectively set the DW APB clockevent timer cpumask to 'cpu_possible_mask'. Signed-off-by:
-
Serge Semin authored
This binding file doesn't belong to the rtc seeing it's a pure timer with no rtc facilities like days/months/years counting and alarms. So move the YAML-file to the Documentation/devicetree/bindings/timer/ directory. Signed-off-by:
-
Serge Semin authored
Modern device tree bindings are supposed to be created as YAML-files in accordance with DT schema. This commit replaces Synopsys DW Timer legacy bare text binding with YAML file. As before the binding file states that the corresponding dts node is supposed to be compatible with generic DW APB Timer indicated by the "snps,dw-apb-timer" compatible string and to provide a mandatory registers memory range, one timer interrupt, either reference clock source or a fixed clock rate value. It may also have an optional APB bus reference clock phandle specified. Signed-off-by:
-
Lokesh Vutla authored
omap_dm_timer_prepare() is setting up the parent 32KHz clock. This prepare() gets called by request_timer in the client's driver. Because of this, the timer clock parent that is set with assigned-clock-parent is being overwritten. So drop this default setting of parent in prepare(). Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by:
Suman Anna <s-anna@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Daniel Lezcano authored
Merge branch 'omap-for-v5.8/dt-timer' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into timers/drivers/next
-
Colin Ian King authored
There is a spelling mistake in a pr_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Daniel Lezcano authored
-
Tony Lindgren authored
We can get a warning for dmtimer_clocksource_init() with 'pa' set but not used. This was used in the earlier revisions of the code but no longer needed, so let's remove the unused pa and of_translate_address(). Let's also do it for dmtimer_clockevent_init() that has a similar issue. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Tony Lindgren authored
We can move the TI dmtimer clockevent and clocksource to live under drivers/clocksource if we rely only on the clock framework, and handle the module configuration directly in the clocksource driver based on the device tree data. This removes the early dependency with system timers to the interconnect related code, and we can probe pretty much everything else later on at the module_init level. Let's first add a new driver for timer-ti-dm-systimer based on existing arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with device tree data while still keeping the old timer.c. And eventually we can just drop the old timer.c. Let's take the opportunity to switch to use readl/writel as pointed out by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further clean-up of the timer-ti-dm code the a lot of the shared helpers can just become static to the non-syster related code. Note the boards can optionally configure different timer source clocks if needed with assigned-clocks and assigned-clock-parents. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Tony Lindgren authored
Let's allow probing the 32k counter directly based on devicetree data to prepare for dropping the related legacy platform code. Let's only do this if the parent node is compatible with ti-sysc to make sure we have the related devicetree data available. Let's also show the 32k counter information before registering the clocksource, now we see it after the clocksource information which is a bit confusing. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dejin Zheng authored
The function acpi_gtdt_init() prints a message in case of error. Remove the error message after testing if the function fails, otherwise it is a duplicate message. Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by:
-
Dejin Zheng authored
The function arc_get_timer_clk() prints an error message if it fails, remove the second error message if the function fails. Signed-off-by:
-
Johan Hovold authored
Since commit 2f8a26c1 ("clocksource: Improve GENERIC_CLOCKEVENTS dependency") all clocksource drivers depend on GENERIC_CLOCKEVENTS so drop the redundant attribute from the RDA-timer entry which was added later. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
- 19 May, 2020 1 commit
-
-
Tony Lindgren authored
We can get a warning for dmtimer_clocksource_init() with 'pa' set but not used. This was used in the earlier revisions of the code but no longer needed, so let's remove the unused pa and of_translate_address(). Let's also do it for dmtimer_clockevent_init() that has a similar issue. Reported-by:
-
- 18 May, 2020 2 commits
-
-
Tony Lindgren authored
We can move the TI dmtimer clockevent and clocksource to live under drivers/clocksource if we rely only on the clock framework, and handle the module configuration directly in the clocksource driver based on the device tree data. This removes the early dependency with system timers to the interconnect related code, and we can probe pretty much everything else later on at the module_init level. Let's first add a new driver for timer-ti-dm-systimer based on existing arch/arm/mach-omap2/timer.c. Then let's start moving SoCs to probe with device tree data while still keeping the old timer.c. And eventually we can just drop the old timer.c. Let's take the opportunity to switch to use readl/writel as pointed out by Daniel Lezcano <daniel.lezcano@linaro.org>. This allows further clean-up of the timer-ti-dm code the a lot of the shared helpers can just become static to the non-syster related code. Note the boards can optionally configure different timer source clocks if needed with assigned-clocks and assigned-clock-parents. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Tony Lindgren authored
Let's allow probing the 32k counter directly based on devicetree data to prepare for dropping the related legacy platform code. Let's only do this if the parent node is compatible with ti-sysc to make sure we have the related devicetree data available. Let's also show the 32k counter information before registering the clocksource, now we see it after the clocksource information which is a bit confusing. Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Rob Herring <robh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 05 May, 2020 1 commit
-
-
Lokesh Vutla authored
Clocksource to timer configured in pwm mode can be selected using the DT property ti,clock-source. There are few pwm timers which are not selecting the clock source and relying on default value in hardware or selected by driver. Instead of relying on default value, always select the clock source from DT. Signed-off-by:
-
- 27 Apr, 2020 2 commits
-
-
Rob Herring authored
The timer-versatile driver provides a sched_clock for certain Arm Ltd. reference platforms. Specifically, it is used on Versatile and 32-bit VExpress. It is not needed for those platforms with an arch timer (all the 64-bit ones) yet CONFIG_MFD_VEXPRESS_SYSREG does still need to be enabled. In that case, the timer-versatile can only be disabled when COMPILE_TEST is enabled which is not desirable. Let's use the sub-arch kconfig symbols instead. Realview platforms don't have the sysregs that this driver uses so correct the help text. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Michael Ellerman authored
This driver is an OF driver, it depends on OF, and uses TIMER_OF_DECLARE, so it should select CONFIG_TIMER_OF. Without CONFIG_TIMER_OF enabled this can lead to warnings such as: powerpc-linux-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-microchip-pit64b.o' being placed in section `__timer_of_table'. Because TIMER_OF_TABLES in vmlinux.lds.h doesn't emit anything into the linker script when CONFIG_TIMER_OF is not enabled. Fixes: 625022a5 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support") Cc: stable@vger.kernel.org # v5.6+ Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
- 15 Apr, 2020 1 commit
-
-
Jason Yan authored
Fix the following coccicheck warning: drivers/clocksource/timer-atmel-st.c:142:6-12: Unneeded variable: "status". Return "0" on line 166 Signed-off-by:
Jason Yan <yanaijie@huawei.com> Acked-by:
-
- 12 Apr, 2020 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
