Skip to content

L
linux
Switch branch/tag
  1. 28 Nov, 2019 1 commit
    • Charles Keepax's avatar
      spi: dw: Correct handling of native chipselect · ada9e3fc
      Charles Keepax authored 
      This patch reverts commit 6e0a32d6 ("spi: dw: Fix default polarity
of native chipselect").

The SPI framework always called the set_cs callback with the logic
level it desired on the chip select line, which is what the drivers
original handling supported. commit f3186dd8 ("spi: Optionally
use GPIO descriptors for CS GPIOs") changed these symantics, but only
in the case of drivers that also support GPIO chip selects, to true
meaning apply slave select rather than logic high. This left things in
an odd state where a driver that only supports hardware chip selects,
the core would handle polarity but if the driver supported GPIOs as
well the driver should handle polarity.  At this point the reverted
change was applied to change the logic in the driver to match new
system.

This was then broken by commit 3e5ec1db ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") which reverted the core back
to consistently calling set_cs with a logic level.

This fix reverts the driver code back to its original state to match
the current core code. This is probably a better fix as a) the set_cs
callback is always called with consistent symantics and b) the
inversion for SPI_CS_HIGH can be handled in the core and doesn't need
to be coded in each driver supporting it.

Fixes: 3e5ec1db ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191127153936.29719-1-ckeepax@opensource.cirrus.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      ada9e3fc
  3. 27 Nov, 2019 1 commit
    • Charles Keepax's avatar
      spi: cadence: Correct handling of native chipselect · 61acd19f
      Charles Keepax authored 
      To fix a regression on the Cadence SPI driver, this patch reverts
commit 6046f540 ("spi: cadence: Fix default polarity of native
chipselect").

This patch was not the correct fix for the issue. The SPI framework
calls the set_cs line with the logic level it desires on the chip select
line, as such the old is_high handling was correct. However, this was
broken by the fact that before commit 3e5ec1db ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") all controllers that offered
the use of a GPIO chip select had SPI_CS_HIGH applied, even for hardware
chip selects. This caused the value passed into the driver to be inverted.
Which unfortunately makes it look like a logical enable the chip select
value.

Since the core was corrected to not unconditionally apply SPI_CS_HIGH,
the Cadence driver, whilst using the hardware chip select, will deselect
the chip select every time we attempt to communicate with the device,
which results in failed communications.

Fixes: 3e5ec1db ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: default avatarCharles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191126164140.6240-1-ckeepax@opensource.cirrus.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
      61acd19f
  5. 25 Nov, 2019 1 commit
  7. 22 Nov, 2019 2 commits
  9. 20 Nov, 2019 1 commit
  11. 18 Nov, 2019 2 commits
  13. 15 Nov, 2019 10 commits
  15. 12 Nov, 2019 1 commit
  17. 11 Nov, 2019 3 commits
  19. 08 Nov, 2019 7 commits
  21. 07 Nov, 2019 2 commits
  23. 06 Nov, 2019 1 commit
  25. 31 Oct, 2019 1 commit
  27. 30 Oct, 2019 4 commits
  29. 28 Oct, 2019 2 commits
  31. 25 Oct, 2019 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7