- 09 Jan, 2006 40 commits
-
-
Mauro Carvalho Chehab authored
- Removes obsoleted stuff - Reorders some stuff to make it clearer to read - Clears some debug messages Signed-off-by:Mauro Carvalho Chehab <mchehab@brturbo.com.br>
-
Hans Verkuil authored
- Mark tda9887.c status log values as hexadecimal (add 0x prefix). Add VIDIOC_LOG_STATUS support to tuner-core.c. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
- Fix compile error (missing '}') in em28xx-video.c. Remove dead code and volume scaling from msp3400.c. Volume scaling does not belong there, it should be done in the driver for the card that uses the msp3400 if needed, not in the msp3400.c source. The volume scaling code gave problems with the ivtv driver which does not need to do any scaling. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Controls now come from video and audio decoder driver for msp3400 and tvp5150. - Added audio and sound controls as provided by msp3400 and tvp5150. Signed-off-by: -
Steven Toth authored
- Add support for another Nova-T-PCI PCI subdevice 0x9001 Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
-
Michael Krufky authored
- Cleanup check for dvb. Signed-off-by:
-
Steven Toth authored
- Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by:
-
Michael Krufky authored
- vfree(NULL) is legal. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Added a new debug msg to help identifying tuner Problems Signed-off-by: -
Mauro Carvalho Chehab authored
- added offset parameter for adjusting tuner offset by hand Signed-off-by: -
Hans Verkuil authored
- Fix gcc-4.0.2 compile error in msp3400.c. - msp_attach moved to reduce a prototype. Signed-off-by:
-
Hans Verkuil authored
- Change function order to reduce usage of function prototypes. Signed-off-by:
-
Hans Verkuil authored
- Fix wrong tuner.h define for tuner 46 (it's a Panasonic, not a Microtune). Signed-off-by:
-
Noone Important authored
- Adds a time-delay to IR remote button presses for av7110_ir input, such that it acts more like a keyboard. A short press will be treated as a single button press. Holding down a button on the remote will respond like holding down a key on the keyboard, and result in a key-repeat. This just introduces a delay between the 1st press, and going into key-repeat so that it is possible to get a single 'up'. Signed-off-by: Noone Important <nxhxzi702 at sneakemail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Andrew de Quincey authored
- Port code for SU1278/SH2 (TUA6100) from pre-refactored code Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Vadim Catana authored
- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by:
Vadim Catana <skystar@moldova.cc> Acked-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Johannes Stezenbach authored
- Minor cleanups. Signed-off-by:
-
Steve Toth authored
- Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support. Signed-off-by:
-
Andrew de Quincey authored
- Implement frontend-specific tuning and the ability to disable zigzag Signed-off-by:
-
Dr. Werner Fink authored
- Driver support for live-ac3, firmware >= 2621 required. Signed-off-by:
Dr. Werner Fink <werner@suse.de> Signed-off-by:
-
Marco Schluessler authored
- Fixed mpeg audio on spdif from Nexus-CA card (rev 2.3), definitions for sound chip MSP3415 Signed-off-by:
Marco Schluessler <marco@lordzodiac.de> Signed-off-by:
-
Oliver Endriss authored
- LNB power can now be switched off for Activy Budget-S rev GR/AL. Dishnetwork support fixed for Nova-S with bsbe1/lnbp21 frontend and Activy Budget-S rev AL. Signed-off-by:
-
Oliver Endriss authored
- Fixed dishnetwork support for Nexus-S rev 2.3 Signed-off-by:
-
Andrew de Quincey authored
- Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI module Signed-off-by:
-
Hartmut Hackmann authored
- Fixed oddities at firmware download - more tolerant vs crystal frequency offset - lower sampling clock Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Patrick Boettcher authored
- To make the integration of future devices easier - modified the dvb-usb-part to allow a device-specific firmware download - added an option to specify whether a device reconnects after a firmware download or not. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
- Tuner description now follows the same CodingStyle as the others Signed-off-by: -
Mauro Carvalho Chehab authored
- Video IF was removed from tuners struct. - Each Video standard have its own Video IF frequency, so it is related to video standard. Of course tuner also needs saw filters for IF, but this way, similar tuners can be grouped into just one entry, if they have the same cut-off freqs and the same switch config and global config. Signed-off-by: -
Vadim Catana authored
- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by:
-
Steven Toth authored
- Enable IR support for the Nova-S-Plus. Signed-off-by:
-
Steven Toth authored
- Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S products. - Basic DVB-S support is working, analog video inputs work. - It has one or two fixme comments, primarily analog GPIOs (audio) and eeprom parsing. - CX24123 code (in cx88-dvb.c) disabled until the - cx24123 module is added to dvb-kernel cvs. Signed-off-by:
-
Steven Toth authored
- Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by:
-
Jörg Schummer authored
- Added "TerraTec Cinergy 250 PCI" board (tv and radio). - svideo not tested - IR yet not working Signed-off-by:
Jrg Schummer <joerg.schummer@web.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
- Added SECAM L' video standard - Common std macros moved to videodev2.h Signed-off-by: -
Philippe De Muyter authored
- This patch fixes merge and typo problems in v4l2/compat, and fixes VIDIOC_STREAMON, VIDIOC_STREAMOFF & VIDIOC_S_FBUF. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Philippe De Muyter authored
- Adds 32-bit compatibility for v4l2 framegrabber ioctls. Signed-off-by:
-
Hans Verkuil authored
- 64-bit fixes for removing warnings on compat_ioctl32. Signed-off-by:
-
Mishal Pytasz authored
- Another build fix for compat_ioctl32.c Signed-off-by:
Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by:
-
Nickolay V. Shmyrev authored
- More build fixes for compat_ioctl32.c Signed-off-by:
-
Mauro Carvalho Chehab authored
- Included explicit compat_ioctl32 handler. - removed extra line on cardlist. Signed-off-by:
-
