- 12 Jul, 2015 7 commits
-
-
Sergei Shtylyov authored
Also print the error code when the request_irq() call fails in rcar_can_open(), rewording the error message... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Sergei Shtylyov authored
Fix typo in the first error message printed by rcar_can_open(). Based on the original patch by Vladimir Barinov. Fixes: 862e2b6a ("can: rcar_can: support all input clocks") Reported-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Printing IRQ # using "%x" and "%u" unsigned formats isn't quite correct as 'ndev->irq' is of type *int*, so the "%d" format needs to be used instead. While fixing this, beautify the dev_info() message in rcar_can_probe() a bit. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
-
Sergei Shtylyov authored
rcar_can_probe() regards 0 as a wrong IRQ #, despite platform_get_irq() that it calls returns negative error code in that case. This leads to the following being printed to the console when attempting to open the device: error requesting interrupt fffffffa because rcar_can_open() calls request_irq() with a negative IRQ #, and that function naturally fails with -EINVAL. Check for the negative error codes instead and propagate them upstream instead of just returning -ENODEV. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
-
Vivien Didelot authored
There is no need to abort attribute setting or object addition, if the prepare phase returned operation not supported. Thus, abort these two transactions only if the error is not -EOPNOTSUPP. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petri Gynther authored
bcmgenet driver needs to separate packet drops from packet errors. When the driver has to drop a *good* packet, due to lack of buffers or replacement skbs, increment only dev->stats.[rx|tx]_dropped. When the driver encounters a bad Rx packet or Tx error, increment only dev->stats.[rx|tx]_errors + relevant detailed error counter. Signed-off-by:
Petri Gynther <pgynther@google.com> Signed-off-by:
-
Enrico Mioso authored
Update referenced specs link to reflect actual file version and location. Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
-
- 11 Jul, 2015 6 commits
-
-
Masanari Iida authored
This patch fix a spelling typo found in API-z8530-sync-txdma-open.html. It is because this file was generated from comment in source, I have to fix comment in source. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Phil Sutter authored
Reconsidering my commit 20462155 "net: inet_diag: export IPV6_V6ONLY sockopt", I am not happy with the limitations it causes for socket analysing code in userspace. Exporting the value only if it is set makes it hard for userspace to decide whether the option is not set or the kernel does not support exporting the option at all. >From an auditor's perspective, the interesting question for listening AF_INET6 sockets is: "Does it NOT have IPV6_V6ONLY set?" Because it is the unexpected case. This patch allows to answer this question reliably. Signed-off-by:
Phil Sutter <phil@nwl.cc> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Satish Ashok authored
Until now when a querier was present static entries couldn't be deleted. Fix this and allow the user to manipulate the mdb with or without a querier. Signed-off-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Julian Anastasov says: ==================== net: fixes for device unregistration Test script from Eric W. Biederman can catch a problem where packets from backlog are processed long after the last synchronize_net call. This can be reproduced after few tests if commit 381c759d ("ipv4: Avoid crashing in ip_error") is reverted for the test. Incoming packets do not hold reference to device but even if they do, subsystems do not expect packets to fly during and after the NETDEV_UNREGISTER event. The first fix has the cost of netif_running check in fast path. The second fix calls rcu_read_lock while local IRQ is disabled, I hope this is not against the rules. ==================== Signed-off-by:
-
Julian Anastasov authored
Incoming packet should be either in backlog queue or in RCU read-side section. Otherwise, the final sequence of flush_backlog() and synchronize_net() may miss packets that can run without device reference: CPU 1 CPU 2 skb->dev: no reference process_backlog:__skb_dequeue process_backlog:local_irq_enable on_each_cpu for flush_backlog => IPI(hardirq): flush_backlog - packet not found in backlog CPU delayed ... synchronize_net - no ongoing RCU read-side sections netdev_run_todo, rcu_barrier: no ongoing callbacks __netif_receive_skb_core:rcu_read_lock - too late free dev process packet for freed dev Fixes: 6e583ce5 ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Julian Anastasov authored
commit 381c759d ("ipv4: Avoid crashing in ip_error") fixes a problem where processed packet comes from device with destroyed inetdev (dev->ip_ptr). This is not expected because inetdev_destroy is called in NETDEV_UNREGISTER phase and packets should not be processed after dev_close_many() and synchronize_net(). Above fix is still required because inetdev_destroy can be called for other reasons. But it shows the real problem: backlog can keep packets for long time and they do not hold reference to device. Such packets are then delivered to upper levels at the same time when device is unregistered. Calling flush_backlog after NETDEV_UNREGISTER_FINAL still accounts all packets from backlog but before that some packets continue to be delivered to upper levels long after the synchronize_net call which is supposed to wait the last ones. Also, as Eric pointed out, processed packets, mostly from other devices, can continue to add new packets to backlog. Fix the problem by moving flush_backlog early, after the device driver is stopped and before the synchronize_net() call. Then use netif_running check to make sure we do not add more packets to backlog. We have to do it in enqueue_to_backlog context when the local IRQ is disabled. As result, after the flush_backlog and synchronize_net sequence all packets should be accounted. Thanks to Eric W. Biederman for the test script and his valuable feedback! Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Fixes: 6e583ce5 ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
- 10 Jul, 2015 2 commits
-
-
Eric Dumazet authored
Commit c29390c6 ("xps: must clear sender_cpu before forwarding") fixed an issue in normal forward path, caused by sender_cpu & napi_id skb fields being an union. Bridge is another point where skb can be forwarded, so we need the same cure. Bug triggers if packet was received on a NIC using skb_mark_napi_id() Fixes: 2bd82484 ("xps: fix xps for stacked devices") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Bob Liu <bob.liu@oracle.com> Tested-by:
-
Krzysztof Kozlowski authored
Value returned by devm_ioremap_resource() was checked for non-NULL but devm_ioremap_resource() returns IOMEM_ERR_PTR, not NULL. In case of error this could lead to dereference of ERR_PTR. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: <stable@vger.kernel.org> Fixes: 46aa27df ("net: axienet: Use devm_* calls") Reviewed-by:
Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
-
- 09 Jul, 2015 13 commits
-
-
David S. Miller authored
Oleg Nesterov says: ==================== net: pktgen: fix race between pktgen_thread_worker() and kthread_stop() I am not familiar with this code and I have no idea how to test these changes, so 2/2 comes as a separate change. 1/2 looks like the obvious bugfix, and probably candidate for -stable. ==================== Signed-off-by: -
Oleg Nesterov authored
pktgen_thread_worker() doesn't need to wait for kthread_stop(), it can simply exit. Just pktgen_create_thread() and pg_net_exit() should do get_task_struct()/put_task_struct(). kthread_stop(dead_thread) is fine. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
pktgen_thread_worker() is obviously racy, kthread_stop() can come between the kthread_should_stop() check and set_current_state(). Signed-off-by:
Jan Stancek <jstancek@redhat.com> Reported-by:
Marcelo Leitner <mleitner@redhat.com> Signed-off-by:
-
Enrico Mioso authored
NCM specs are not actually mandating a specific position in the frame for the NDP (Network Datagram Pointer). However, some Huawei devices will ignore our aggregates if it is not placed after the datagrams it points to. Add support for doing just this, in a per-device configurable way. While at it, update NCM subdrivers, disabling this functionality in all of them, except in huawei_cdc_ncm where it is enabled instead. We aren't making any distinction between different Huawei NCM devices, based on what the vendor driver does. Standard NCM devices are left unaffected: if they are compliant, they should be always usable, still stay on the safe side. This change has been tested and working with a Huawei E3131 device (which works regardless of NDP position), a Huawei E3531 (also working both ways) and an E3372 (which mandates NDP to be after indexed datagrams). V1->V2: - corrected wrong NDP acronym definition - fixed possible NULL pointer dereference - patch cleanup V2->V3: - Properly account for the NDP size when writing new packets to SKB Signed-off-by:
-
Mugunthan V N authored
In commit 'c03abd84 ("net: ethernet: cpsw: don't requests IRQs we don't use")', common isr is split into tx and rx, but in rx isr tx interrupt is also disabledi in cpsw_disable_irq(). So tx interrupts are not handled during rx interrupts and rx napi completion and results in poor tx performance by 40Mbps. Fixing by disabling only rx interrupt in rx isr. Cc: Felipe Balbi <balbi@ti.com> Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Vaishali Thakkar authored
Use eth_hw_addr_random() instead of calling random_ether_addr(). Here, this change is setting addr_assign_type to NET_ADDR_RANDOM. The Coccinelle semantic patch that performs this transformation is as follows: @@ identifier a,b; @@ -random_ether_addr(a->b); +eth_hw_addr_random(a); Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Johannes Thumshirn authored
Destroy minor_idr on module_exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by:Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree. This batch mostly comes with patches to address fallout from the previous merge window cycle, they are: 1) Use entry->state.hook_list from nf_queue() instead of the global nf_hooks which is not valid when used from NFPROTO_NETDEV, this should cause no problems though since we have no userspace queueing for that family, but let's fix this now for the sake of correctness. Patch from Eric W. Biederman. 2) Fix compilation breakage in bridge netfilter if CONFIG_NF_DEFRAG_IPV4 is not set, from Bernhard Thaler. 3) Use percpu jumpstack in arptables too, now that there's a single copy of the rule blob we can't store the return address there anymore. Patch from Florian Westphal. 4) Fix a skb leak in the xmit path of bridge netfilter, problem there since 2.6.37 although it should be not possible to hit invalid traffic there, also from Florian. 5) Eric Leblond reports that when loading a large ruleset with many missing modules after a fresh boot, nf_tables can take long time commit it. Fix this by processing the full batch until the end, even on missing modules, then abort only once and restart processing. 6) Add bridge netfilter files to the MAINTAINER files. 7) Fix a net_device refcount leak in the new IPV6 bridge netfilter code, from Julien Grall. ==================== Signed-off-by: -
Peter Dunning authored
The limit for BQL is updated each time we call netdev_tx_completed_queue. Without this patch the BQL limit was updated for every TX event we see. The issue was that this only updated the limit to handle the data we complete in two events as the first event wouldn't show that enough traffic had been processed between them. This was OK when interrupt moderation was off but not when it was on as more data had to be completed in a single interrupt. The patch changes this so that we do report the completion to BQL only when all the TX events in the interrupt have been processed. Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
-
Zheng Liu authored
This device is sold as 'NVIDIA Tegra USB 3.0 Ethernet'. Chipset is RTL8153 and works with r8152. Signed-off-by:
Zheng Liu <zhliu@nvidia.com> Signed-off-by:
-
Denys Vlasenko authored
As its first order of business, boomerang_interrupt() checks whether the device really has any pending interrupts. If it does not, it does nothing and returns, but it still returns IRQ_HANDLED. This is wrong: interrupt was not handled, IRQ handlers of other devices sharing this IRQ line need to be called. vortex_interrupt() has it right: it returns IRQ_NONE in this case via IRQ_RETVAL(0). Do the same in boomerang_interrupt(). Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by:
-
Neil Horman authored
vmxnet3's current napi path is built to count every rx descriptor we recieve, and use that as a count of the napi budget. That means its possible to return from a napi poll halfway through recieving a fragmented packet accross multiple dma descriptors. If that happens, the next napi poll will start with the descriptor ring in an improper state (e.g. the first descriptor we look at may have the end-of-packet bit set), which will cause a BUG halt in the driver. Fix the issue by only counting whole received packets in the napi poll and returning that value, rather than the descriptor count. Tested by the reporter and myself, successfully Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
-
Andy Gospodarek authored
This kernel patch exports the value of the new ignore_routes_with_linkdown via netconf. v2: changes to notify userspace via netlink when sysctl values change and proposed for 'net' since this could be considered a bugfix Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
-
- 08 Jul, 2015 12 commits
-
-
Shradha Shah authored
This patch avoids the double up_write to filter_sem if efx_net_open() fails. Resolves: 2d432f20Signed-off-by:
-
Nikolay Aleksandrov authored
Since commit b0e9a30d ("bridge: Add vlan id to multicast groups") there's a check in br_ip_equal() for a matching vlan id, but the mdb functions were not modified to use (or at least zero it) so when an entry was added it would have a garbage vlan id (from the local br_ip variable in __br_mdb_add/del) and this would prevent it from being matched and also deleted. So zero out the whole local ip var to protect ourselves from future changes and also to fix the current bug, since there's no vlan id support in the mdb uapi - use always vlan id 0. Example before patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent RTNETLINK answers: Invalid argument After patch: root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent root@debian:~# bridge mdb Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Fixes: b0e9a30d ("bridge: Add vlan id to multicast groups") Signed-off-by:
-
Mugunthan V N authored
When cpsw's number of slave is set to 1 in device tree and while accessing second slave ndev and priv in cpsw_tx_interrupt(), there is a kernel crash. This is due to cpsw_get_slave_priv() not verifying number of slaves while retriving netdev priv and returns a invalid memory region. Fixing the issue by introducing number of slave check in cpsw_get_slave_priv() and cpsw_get_slave_ndev(). [ 15.879589] Unable to handle kernel paging request at virtual address 0f0e142c [ 15.888540] pgd = ed374000 [ 15.891359] [0f0e142c] *pgd=00000000 [ 15.895105] Internal error: Oops: 5 [#1] SMP ARM [ 15.899936] Modules linked in: [ 15.903139] CPU: 0 PID: 593 Comm: udhcpc Tainted: G W 4.1.0-12205-gfda8b18c-dirty #10 [ 15.912386] Hardware name: Generic AM43 (Flattened Device Tree) [ 15.918557] task: ed2a2e00 ti: ed3fe000 task.ti: ed3fe000 [ 15.924187] PC is at cpsw_tx_interrupt+0x30/0x44 [ 15.929008] LR is at _raw_spin_unlock_irqrestore+0x40/0x44 [ 15.934726] pc : [<c048b9cc>] lr : [<c05ef4f4>] psr: 20000193 [ 15.934726] sp : ed3ffc08 ip : ed2a2e40 fp : 00000000 [ 15.946685] r10: c0969ce8 r9 : c0969cfc r8 : 00000000 [ 15.952129] r7 : 000000c6 r6 : ee54ab00 r5 : ee169c64 r4 : ee534e00 [ 15.958932] r3 : 0f0e0d0c r2 : 00000000 r1 : ed3ffbc0 r0 : 00000001 [ 15.965735] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 15.973261] Control: 10c5387d Table: ad374059 DAC: 00000015 [ 15.979246] Process udhcpc (pid: 593, stack limit = 0xed3fe218) [ 15.985414] Stack: (0xed3ffc08 to 0xed400000) [ 15.989954] fc00: ee54ab00 c009928c c0a9e648 60000193 000032e4 ee169c00 [ 15.998478] fc20: ee169c64 ee169c00 ee169c64 ee54ab00 00000001 00000001 ee67e268 ee008800 [ 16.006995] fc40: ee534800 c009946c ee169c00 ee169c64 c08bd660 c009c370 c009c2a4 000000c6 [ 16.015513] fc60: c08b75c4 c08b0854 00000000 c0098b3c 000000c6 c0098c50 ed3ffcb0 0000003a [ 16.024033] fc80: ed3ffcb0 fa24010c c08b7800 fa240100 ee7e9880 c00094c4 c05ef4e8 60000013 [ 16.032556] fca0: ffffffff ed3ffce4 ee7e9880 c05ef964 00000001 ed2a33d8 00000000 ed2a2e00 [ 16.041080] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800 [ 16.049603] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff 00000001 00000001 [ 16.058121] fd00: ee536bf8 c0487a04 00000000 00000000 ee534800 00000000 00000156 c048c990 [ 16.066645] fd20: 00000000 00000000 c0969f40 00000000 00000000 c05000e8 00000001 00000000 [ 16.075167] fd40: 00000000 c051eefc 00000000 ee67e268 00000000 00000000 ee51b800 ed3ffd9c [ 16.083690] fd60: 00000000 ee67e200 ee51b800 ee7e9880 ee67e268 00000000 00000000 ee67e200 [ 16.092211] fd80: ee51b800 ee7e9880 ee67e268 ee534800 ee67e200 c051eedc ee67e268 00000010 [ 16.100727] fda0: 00000000 00000000 ee7e9880 ee534800 00000000 ee67e268 ee51b800 c05006fc [ 16.109247] fdc0: ee67e268 00000001 c0500488 00000156 ee7e9880 00000000 ed3fe000 fffffff4 [ 16.117771] fde0: ed3fff1c ee7e9880 ee534800 00000148 00000000 ed1f8340 00000000 00000000 [ 16.126289] fe00: 00000000 c05a9054 00000000 00000000 00000156 c0ab62a8 00000010 ed3e7000 [ 16.134812] fe20: 00000000 00000008 edcfb700 ed3fff1c c0fb5f94 ed2a2e00 c0fb5f64 000005d8 [ 16.143336] fe40: c0a9b3b8 00000000 ed3e7070 00000000 00000000 00000000 00009f40 00000000 [ 16.151858] fe60: 00000000 00020022 00110008 00000000 00000000 43004400 00000000 ffffffff [ 16.160374] fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 16.168898] fea0: edcfb700 bee5f380 00000014 00000000 ed3fe000 00000000 00004400 c04e2b64 [ 16.177415] fec0: 00000002 c04e3b00 ed3ffeec 00000001 0000011a 00000000 00000000 bee5f394 [ 16.185937] fee0: 00000148 ed3fff10 00000014 00000001 00000000 00000000 ed3ffee4 00000000 [ 16.194459] ff00: 00000000 00000000 00000000 c04e3664 00080011 00000002 06000000 ffffffff [ 16.202980] ff20: 0000ffff ffffffff 0000ffff c008dd54 ee5a6f08 ee636e80 c096972d c0089c14 [ 16.211499] ff40: 00000000 60000013 ee5a6f40 60000013 00000000 ee5a6f40 00000002 00000006 [ 16.220023] ff60: 00000000 edcfb700 00000001 ed2a2e00 c000f60c 00000001 0000011a c008ea34 [ 16.228540] ff80: 00000006 00000000 bee5f380 00000014 bee5f380 00000014 bee5f380 00000122 [ 16.237059] ffa0: c000f7c4 c000f5e0 bee5f380 00000014 00000006 bee5f394 00000148 00000000 [ 16.245581] ffc0: bee5f380 00000014 bee5f380 00000122 fffffd6e 00004300 00004800 00004400 [ 16.254104] ffe0: bee5f378 bee5f36c 000307ec b6f39044 40000010 00000006 ed36fa40 00000000 [ 16.262642] [<c048b9cc>] (cpsw_tx_interrupt) from [<c009928c>] (handle_irq_event_percpu+0x64/0x204) [ 16.272076] [<c009928c>] (handle_irq_event_percpu) from [<c009946c>] (handle_irq_event+0x40/0x64) [ 16.281330] [<c009946c>] (handle_irq_event) from [<c009c370>] (handle_fasteoi_irq+0xcc/0x1a8) [ 16.290220] [<c009c370>] (handle_fasteoi_irq) from [<c0098b3c>] (generic_handle_irq+0x20/0x30) [ 16.299197] [<c0098b3c>] (generic_handle_irq) from [<c0098c50>] (__handle_domain_irq+0x64/0xdc) [ 16.308273] [<c0098c50>] (__handle_domain_irq) from [<c00094c4>] (gic_handle_irq+0x20/0x60) [ 16.316987] [<c00094c4>] (gic_handle_irq) from [<c05ef964>] (__irq_svc+0x44/0x5c) [ 16.324779] Exception stack(0xed3ffcb0 to 0xed3ffcf8) [ 16.330044] fca0: 00000001 ed2a33d8 00000000 ed2a2e00 [ 16.338567] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800 [ 16.347090] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff [ 16.353987] [<c05ef964>] (__irq_svc) from [<c05ef4e8>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 16.362973] [<c05ef4e8>] (_raw_spin_unlock_irqrestore) from [<c0487a04>] (cpdma_check_free_tx_desc+0x60/0x6c) [ 16.373311] [<c0487a04>] (cpdma_check_free_tx_desc) from [<c048c990>] (cpsw_ndo_start_xmit+0xb4/0x1ac) [ 16.383017] [<c048c990>] (cpsw_ndo_start_xmit) from [<c05000e8>] (dev_hard_start_xmit+0x2a4/0x4c0) [ 16.392364] [<c05000e8>] (dev_hard_start_xmit) from [<c051eedc>] (sch_direct_xmit+0xf4/0x210) [ 16.401246] [<c051eedc>] (sch_direct_xmit) from [<c05006fc>] (__dev_queue_xmit+0x2ac/0x7bc) [ 16.409960] [<c05006fc>] (__dev_queue_xmit) from [<c05a9054>] (packet_sendmsg+0xc68/0xeb4) [ 16.418585] [<c05a9054>] (packet_sendmsg) from [<c04e2b64>] (sock_sendmsg+0x14/0x24) [ 16.426663] [<c04e2b64>] (sock_sendmsg) from [<c04e3b00>] (SyS_sendto+0xb4/0xe0) [ 16.434377] [<c04e3b00>] (SyS_sendto) from [<c000f5e0>] (ret_fast_syscall+0x0/0x54) [ 16.442360] Code: e5943118 e593303c e3530000 0a000002 (e5930720) [ 16.448716] ---[ end trace a68159f094d85ba6 ]--- [ 16.453526] Kernel panic - not syncing: Fatal exception in interrupt [ 16.460149] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by:
-
Stephen Smalley authored
Calling connect() with an AF_TIPC socket would trigger a series of error messages from SELinux along the lines of: SELinux: Invalid class 0 type=AVC msg=audit(1434126658.487:34500): avc: denied { <unprintable> } for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable> permissive=0 This was due to a failure to initialize the security state of the new connection sock by the tipc code, leaving it with junk in the security class field and an unlabeled secid. Add a call to security_sk_clone() to inherit the security state from the parent socket. Reported-by:Tim Shearer <tim.shearer@overturenetworks.com> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
Paul Moore <paul@paul-moore.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
David S. Miller authored
Shradha Shah says: ==================== sfc: compat for lack of VADAPTOR_SET_MAC in adaptor_firmware <= 4.1.1.1023 This patch series resolves an incompatibility with legacy firmware due to the lack of MC_CMD_VADAPTOR_SET_MAC in adaptor_firmware <= 4.1.1.1023 Unless this patch series is applied there will be a compatibility issue between the driver and Solarflare adapters running older firmware. Tested with and without CONFIG_SFC_SRIOV ==================== Signed-off-by: -
Daniel Pieczko authored
Signed-off-by:
-
Daniel Pieczko authored
Some versions of MCFW do not support the MC_CMD_VADAPTOR_SET_MAC command, and ENOSYS will be returned. If the PF created its own vport, the function's datapath must be stopped and the vport can be reconfigured to reflect the new MAC address. If the MCFW created the vport for the PF (which is the case when the nic_data->vport_mac is blank), nothing further needs to be done as the vport is not under the control of the PF. This only applies to PFs because the MCFW in question does not support VFs. Signed-off-by:
-
Daniel Pieczko authored
Re-organize the structure of error handling to avoid having to duplicate the netif_err() around the ifdefs. The only change to the behaviour of the error-handling is that the PF's data structure to record VF details should only be updated if the original command succeeded. Signed-off-by:
-
Mazhar Rana authored
When "primary_reselect" is set to "failure", primary interface should not become active until current active slave is down. But if we set first member of bond device as a "primary" interface and "primary_reselect" is set to "failure" then whenever primary interface's link get back(up) it become active slave even if current active slave is still up. With this patch, "bond_find_best_slave" will not traverse members if primary interface is not candidate for failover/reselection and current active slave is still up. Signed-off-by:
Mazhar Rana <mazhar.rana@cyberoam.com> Signed-off-by:
Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Timo Teräs authored
Frag needed should be sent only if the inner header asked to not fragment. Currently fragmentation is broken if the tunnel has df set, but df was not asked in the original packet. The tunnel's df needs to be still checked to update internally the pmtu cache. Commit 23a3647b broke it, and this commit fixes the ipv4 df check back to the way it was. Fixes: 23a3647b ("ip_tunnels: Use skb-len to PMTU check.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Daniel Borkmann authored
Jason Gunthorpe reported that since commit c02db8c6 ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6 ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by:
-
Andrew Lunn authored
When a switch is attached to the mdio bus, the mdio bus can be used while the interface is not open. If the IPG clock is not enabled, MDIO reads/writes will simply time out. Add support for runtime PM to control this clock. Enable/disable this clock using runtime PM, with open()/close() and mdio read()/write() function triggering runtime PM operations. Since PM is optional, the IPG clock is enabled at probe and is no longer modified by fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is guaranteed the clock is running when MDIO operations are performed. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
