- 10 Aug, 2018 20 commits
-
-
Aneesh Kumar K.V authored
Fix the below build error using strlcpy instead of strncpy In function 'pnv_parse_cpuidle_dt', inlined from 'pnv_init_idle_states' at arch/powerpc/platforms/powernv/idle.c:840:7, inlined from '__machine_initcall_powernv_pnv_init_idle_states' at arch/powerpc/platforms/powernv/idle.c:870:1: arch/powerpc/platforms/powernv/idle.c:820:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation] strncpy(pnv_idle_states[i].name, temp_string[i], ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PNV_IDLE_NAME_LEN); Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This patch makes sure we update the mmu_gather page size even if we are requesting for a fullmm flush. This avoids triggering VM_WARN_ON in code paths like __tlb_remove_page_size that explicitly check for removing range page size to be same as mmu gather page size. Fixes: 5a609934 ("powerpc/64s/radix: tlb do not flush on page size when fullmm") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Mathieu Malaterre authored
‘type’ is only used when CONFIG_DEBUG_HIGHMEM is set. So add a possibly unused tag to variable. Remove warning treated as error with W=1: arch/powerpc/mm/highmem.c:59:6: error: variable ‘type’ set but not used [-Werror=unused-but-set-variable] Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Mathieu Malaterre authored
Make sure to include setup.h to provide the following prototypes: - irqstack_early_init - setup_power_save - initialize_cache_info Fix the following warnings (treated as error in W=1): arch/powerpc/kernel/setup_32.c:198:13: error: no previous prototype for ‘irqstack_early_init’ arch/powerpc/kernel/setup_32.c:238:13: error: no previous prototype for ‘setup_power_save’ arch/powerpc/kernel/setup_32.c:253:13: error: no previous prototype for ‘initialize_cache_info’ Signed-off-by:
-
Mathieu Malaterre authored
Add gcc attribute unused for two variables. Fix warnings treated as errors with W=1: arch/powerpc/kernel/prom_init.c:1388:8: error: variable ‘path’ set but not used [-Werror=unused-but-set-variable] Suggested-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Mathieu Malaterre authored
These functions can all be static, make it so. Fix warnings treated as errors with W=1: arch/powerpc/platforms/powermac/pci.c:1022:6: error: no previous prototype for ‘pmac_pci_fixup_ohci’ arch/powerpc/platforms/powermac/pci.c:1057:6: error: no previous prototype for ‘pmac_pci_fixup_cardbus’ arch/powerpc/platforms/powermac/pci.c:1094:6: error: no previous prototype for ‘pmac_pci_fixup_pciata’ Remove has_address declaration and assignment since it's not used. Also add gcc attribute unused to fix a warning treated as error with W=1: arch/powerpc/platforms/powermac/pci.c:784:19: error: variable ‘has_address’ set but not used arch/powerpc/platforms/powermac/pci.c:907:22: error: variable ‘ht’ set but not used Suggested-by:
-
Mathieu Malaterre authored
Since the value of x is never intended to be read, remove it. Fix warning treated as error with W=1: arch/powerpc/platforms/powermac/udbg_scc.c:76:9: error: variable ‘x’ set but not used Suggested-by:
-
Mathieu Malaterre authored
In commit 14baf4d9 ("cxl: Add guest-specific code") the following code was added: if (afu->crs_len < 0) { dev_err(&afu->dev, "Unexpected configuration record size value\n"); return -EINVAL; } However the variable `crs_len` is of type u64 and cannot be compared < 0. Remove the dead code section. Fix the following warning treated as error with W=1: ../drivers/misc/cxl/guest.c:919:19: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] Signed-off-by:
-
Mathieu Malaterre authored
The header `pmac.h` was not included, leading to the following warnings, treated as error with W=1: arch/powerpc/platforms/powermac/time.c:69:13: error: no previous prototype for ‘pmac_time_init’ [-Werror=missing-prototypes] arch/powerpc/platforms/powermac/time.c:207:15: error: no previous prototype for ‘pmac_get_boot_time’ [-Werror=missing-prototypes] arch/powerpc/platforms/powermac/time.c:222:6: error: no previous prototype for ‘pmac_get_rtc_time’ [-Werror=missing-prototypes] arch/powerpc/platforms/powermac/time.c:240:5: error: no previous prototype for ‘pmac_set_rtc_time’ [-Werror=missing-prototypes] arch/powerpc/platforms/powermac/time.c:259:12: error: no previous prototype for ‘via_calibrate_decr’ [-Werror=missing-prototypes] arch/powerpc/platforms/powermac/time.c:311:13: error: no previous prototype for ‘pmac_calibrate_decr’ [-Werror=missing-prototypes] The function `via_calibrate_decr` was made static to silence a warning. Signed-off-by:
-
Markus Elfring authored
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by:
-
Boqun Feng authored
Currently, in xmon, there is no obvious way to get an address for a percpu symbol for a particular cpu. Having such an ability would be good for debugging the system when percpu variables got involved. Therefore, this patch introduces a new xmon command "lp" to lookup the address for percpu symbols. Usage of "lp" is similar to "ls", except that we could add a cpu number to choose the variable of which cpu we want to lookup. If no cpu number is given, lookup for current cpu. Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
-
Christophe Leroy authored
huge_pte_offset_and_shift() has never existed Signed-off-by:
-
Christophe Leroy authored
The symbol memcpy_nocache_branch defined in order to allow patching of memset function once cache is enabled leads to confusing reports by perf tool. Using the new patch_site functionality solves this issue. Signed-off-by:
-
Mahesh Salgaonkar authored
During Machine Check interrupt on pseries platform, register r3 points RTAS extended event log passed by hypervisor. Since hypervisor uses r3 to pass pointer to rtas log, it stores the original r3 value at the start of the memory (first 8 bytes) pointed by r3. Since hypervisor stores this info and rtas log is in BE format, linux should make sure to restore r3 value in correct endian format. Without this patch when MCE handler, after recovery, returns to code that that caused the MCE may end up with Data SLB access interrupt for invalid address followed by kernel panic or hang. Severe Machine check interrupt [Recovered] NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel] Initiator: CPU Error type: SLB [Multihit] Effective address: d00000000ca70000 cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0] pc: c0000000009694c0: vsnprintf+0x80/0x480 lr: c0000000009698e0: vscnprintf+0x20/0x60 sp: c0000000fc777830 msr: 8000000002009033 dar: a803a30c000000d0 current = 0xc00000000bc9ef00 paca = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01 pid = 8860, comm = insmod vscnprintf+0x20/0x60 vprintk_emit+0xb4/0x4b0 vprintk_func+0x5c/0xd0 printk+0x38/0x4c init_module+0x1c0/0x338 [bork_kernel] do_one_initcall+0x54/0x230 do_init_module+0x8c/0x248 load_module+0x12b8/0x15b0 sys_finit_module+0xa8/0x110 system_call+0x58/0x6c --- Exception: c00 (System Call) at 00007fff8bda0644 SP (7fffdfbfe980) is in userspace This patch fixes this issue. Fixes: a08a53ea ("powerpc/le: Enable RTAS events support") Cc: stable@vger.kernel.org # v3.15+ Reviewed-by:Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Hari Bathini authored
With dynamic memory allocation support for crash memory ranges array, there is no hard limit on the no. of crash memory ranges kernel could export, but program headers count could overflow in the /proc/vmcore ELF file while exporting each memory range as PT_LOAD segment. Reduce the likelihood of a such scenario, by folding adjacent crash memory ranges which minimizes the total number of PT_LOAD segments. Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Reviewed-by:
-
Hari Bathini authored
Crash memory ranges is an array of memory ranges of the crashing kernel to be exported as a dump via /proc/vmcore file. The size of the array is set based on INIT_MEMBLOCK_REGIONS, which works alright in most cases where memblock memory regions count is less than INIT_MEMBLOCK_REGIONS value. But this count can grow beyond INIT_MEMBLOCK_REGIONS value since commit 142b45a7 ("memblock: Add array resizing support"). On large memory systems with a few DLPAR operations, the memblock memory regions count could be larger than INIT_MEMBLOCK_REGIONS value. On such systems, registering fadump results in crash or other system failures like below: task: c00007f39a290010 ti: c00000000b738000 task.ti: c00000000b738000 NIP: c000000000047df4 LR: c0000000000f9e58 CTR: c00000000010f180 REGS: c00000000b73b570 TRAP: 0300 Tainted: G L X (4.4.140+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22004484 XER: 20000000 CFAR: c000000000008500 DAR: 000007a450000000 DSISR: 40000000 SOFTE: 0 ... NIP [c000000000047df4] smp_send_reschedule+0x24/0x80 LR [c0000000000f9e58] resched_curr+0x138/0x160 Call Trace: resched_curr+0x138/0x160 (unreliable) check_preempt_curr+0xc8/0xf0 ttwu_do_wakeup+0x38/0x150 try_to_wake_up+0x224/0x4d0 __wake_up_common+0x94/0x100 ep_poll_callback+0xac/0x1c0 __wake_up_common+0x94/0x100 __wake_up_sync_key+0x70/0xa0 sock_def_readable+0x58/0xa0 unix_stream_sendmsg+0x2dc/0x4c0 sock_sendmsg+0x68/0xa0 ___sys_sendmsg+0x2cc/0x2e0 __sys_sendmsg+0x5c/0xc0 SyS_socketcall+0x36c/0x3f0 system_call+0x3c/0x100 as array index overflow is not checked for while setting up crash memory ranges causing memory corruption. To resolve this issue, dynamically allocate memory for crash memory ranges and resize it incrementally, in units of pagesize, on hitting array size limit. Fixes: 2df173d9 ("fadump: Initialize elfcore header and add PT_LOAD program headers.") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
-
Christophe Leroy authored
commit e8cb7a55 ("powerpc: remove superflous inclusions of asm/fixmap.h") removed inclusion of asm/fixmap.h from files not including objects from that file. However, asm/mmu-8xx.h includes call to __fix_to_virt(). The proper way would be to include asm/fixmap.h in asm/mmu-8xx.h but it creates an inclusion loop. So we have to leave asm/fixmap.h in sysdep/cpm_common.c for CONFIG_PPC_EARLY_DEBUG_CPM CC arch/powerpc/sysdev/cpm_common.o In file included from ./arch/powerpc/include/asm/mmu.h:340:0, from ./arch/powerpc/include/asm/reg_8xx.h:8, from ./arch/powerpc/include/asm/reg.h:29, from ./arch/powerpc/include/asm/processor.h:13, from ./arch/powerpc/include/asm/thread_info.h:28, from ./include/linux/thread_info.h:38, from ./arch/powerpc/include/asm/ptrace.h:159, from ./arch/powerpc/include/asm/hw_irq.h:12, from ./arch/powerpc/include/asm/irqflags.h:12, from ./include/linux/irqflags.h:16, from ./include/asm-generic/cmpxchg-local.h:6, from ./arch/powerpc/include/asm/cmpxchg.h:537, from ./arch/powerpc/include/asm/atomic.h:11, from ./include/linux/atomic.h:5, from ./include/linux/mutex.h:18, from ./include/linux/kernfs.h:13, from ./include/linux/sysfs.h:16, from ./include/linux/kobject.h:20, from ./include/linux/device.h:16, from ./include/linux/node.h:18, from ./include/linux/cpu.h:17, from ./include/linux/of_device.h:5, from arch/powerpc/sysdev/cpm_common.c:21: arch/powerpc/sysdev/cpm_common.c: In function ‘udbg_init_cpm’: ./arch/powerpc/include/asm/mmu-8xx.h:218:25: error: implicit declaration of function ‘__fix_to_virt’ [-Werror=implicit-function-declaration] #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ ./arch/powerpc/include/asm/mmu-8xx.h:218:39: error: ‘FIX_IMMR_BASE’ undeclared (first use in this function) #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ ./arch/powerpc/include/asm/mmu-8xx.h:218:39: note: each undeclared identifier is reported only once for each function it appears in #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) ^ arch/powerpc/sysdev/cpm_common.c:75:7: note: in expansion of macro ‘VIRT_IMMR_BASE’ VIRT_IMMR_BASE); ^ cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/sysdev/cpm_common.o] Error 1 Fixes: e8cb7a55 ("powerpc: remove superflous inclusions of asm/fixmap.h") Signed-off-by:
-
Dan Carpenter authored
The problem is the the calculation should be "end - start + 1" but the plus one is missing in this calculation. Fixes: 8626816e ("powerpc: add support for MPIC message register API") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Rashmica Gupta authored
Signed-off-by:
Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by:
-
Rashmica Gupta authored
This patch allows the memory removed by memtrace to be readded to the kernel. So now you don't have to reboot your system to add the memory back to the kernel or to have a different amount of memory removed. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
- 08 Aug, 2018 1 commit
-
-
Breno Leitao authored
There are some powerpc selftests, as tm/tm-unavailable, that run for a long period (>120 seconds), and if it is interrupted, as pressing CRTL-C (SIGINT), the foreground process (harness) dies but the child process and threads continue to execute (with PPID = 1 now) in background. In this case, you'd think the whole test exited, but there are remaining threads and processes being executed in background. Sometimes these zombies processes are doing annoying things, as consuming the whole CPU or dumping things to STDOUT. This patch fixes this problem by attaching an empty signal handler to SIGINT in the harness process. This handler will interrupt (EINTR) the parent process waitpid() call, letting the code to follow through the normal flow, which will kill all the processes in the child process group. This patch also fixes a typo. Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
-
- 07 Aug, 2018 19 commits
-
-
Benjamin Herrenschmidt authored
For (bad) historical reasons, OPAL used to create a non-standard pair of properties "opal-interrupts" and "opal-interrupts-names" for representing the list of interrupts it wants Linux to request on its behalf. Among other issues, the opal-interrupts doesn't have a way to carry the type of interrupts, and they were assumed to be all level sensitive. This is wrong on some recent systems where some of them are edge sensitive causing warnings in the XIVE code and possible misbehaviours if they need to be retriggered (typically the NPU2 TCE error interrupts). This makes Linux switch to using the standard "interrupts" and "interrupt-names" properties instead when they are available, using standard of_irq helpers, which can carry all the desired type information. Newer versions of OPAL will generate those properties in addition to the legacy ones. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup prefix logic to check strlen(r->name). Reinstate setting of start = 0 in opal_event_shutdown() to avoid double free warnings] Signed-off-by:
-
Christophe Leroy authored
GCC supports -mcpu=e300c2 and -mcpu=e300c3 This patch gives the opportunity to tune kernel to one of those two types. Signed-off-by:
-
Christophe Leroy authored
This patch extends to PPC32 the capability to select the exact CPU type. Signed-off-by:
-
Christophe Leroy authored
At the time being, when adding a new CPU for selection, both Kconfig.cputype and Makefile have to be modified. This patch moves into Kconfig.cputype the name of the CPU to me passed to the -mcpu= argument. Signed-off-by:
-
Rodrigo R. Galvao authored
In Makefiles if we're testing a CONFIG_FOO symbol for equality with 'y' we can instead just use ifdef. The latter reads easily, so convert to it where possible. Signed-off-by:
Rodrigo R. Galvao <rosattig@linux.vnet.ibm.com> Reviewed-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by:
-
Paul Mackerras authored
In __copy_tofrom_user, if we encounter an exception on a store, we stop copying and return the number of bytes not copied. However, if the store is wider than one byte and is to an unaligned address, it is possible that the store operand overlaps a page boundary and the exception occurred on the latter part of the store operand, meaning that it would be possible to copy a few more bytes. Since copy_to_user is generally expected to copy as much as possible, it would be better to copy those extra few bytes. This adds code to do that. Since this edge case is not performance-critical, the code has been written to be compact rather than as fast as possible. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Michael Ellerman authored
This adds a set of test cases to test the behaviour of copy_tofrom_user when exceptions are encountered accessing the source or destination. Currently, copy_tofrom_user does not always copy as many bytes as possible when an exception occurs on a store to the destination, and that is reflected in failures in these tests. Based on a test program from Anton Blanchard. [paulus@ozlabs.org - test all three paths, wrote commit description, made EX_TABLE create an exception table.] Signed-off-by:
-
Paul Mackerras authored
The hand-coded assembler 64-bit copy routines include feature sections that select one code path or another depending on which CPU we are executing on. The self-tests for these copy routines end up testing just one path. This adds a mechanism for selecting any desired code path at compile time, and makes 2 or 3 versions of each test, each using a different code path, so as to cover all the possible paths. Signed-off-by:
-
Paul Mackerras authored
This aims to make the generation of exception table entries for the loads and stores in __copy_tofrom_user_base clearer and easier to verify. Instead of having a series of local labels on the loads and stores, with a series of corresponding labels later for the exception handlers, we now use macros to generate exception table entries at the point of each load and store that could potentially trap. We do this with the macros lex (load exception) and stex (store exception). These macros are used right before the load or store to which they apply. Some complexity is introduced by the fact that we have some more work to do after hitting an exception, because we need to calculate and return the number of bytes not copied. The code uses r3 as the current pointer into the destination buffer, that is, the address of the first byte of the destination that has not been modified. However, at various points in the copy loops, r3 can be 4, 8, 16 or 24 bytes behind that point. To express this offset in an understandable way, we define a symbol r3_offset which is updated at various points so that it equal to the difference between the address of the first unmodified byte of the destination and the value in r3. (In fact it only needs to be accurate at the point of each lex or stex macro invocation.) The rules for updating r3_offset are as follows: * It starts out at 0 * An addi r3,r3,N instruction decreases r3_offset by N * A store instruction (stb, sth, stw, std) to N(r3) increases r3_offset by the width of the store (1, 2, 4, 8) * A store with update instruction (stbu, sthu, stwu, stdu) to N(r3) sets r3_offset to the width of the store. There is some trickiness to the way that the lex and stex macros and the associated exception handlers work. I would have liked to use the current value of r3_offset in the name of the symbol used as the exception handler, as in ".Lld_exc_$(r3_offset)" and then have symbols .Lld_exc_0, .Lld_exc_8, .Lld_exc_16 etc. corresponding to the offsets that needed to be added to r3. However, I couldn't see a way to do that with gas. Instead, the exception handler address is .Lld_exc - r3_offset or .Lst_exc - r3_offset, that is, the distance ahead of .Lld_exc/.Lst_exc that we start executing is equal to the amount that we need to add to r3. This works because r3_offset is always a small multiple of 4, and our instructions are 4 bytes long. This means that before .Lld_exc and .Lst_exc, we have a sequence of instructions that increments r3 by 4, 8, 16 or 24 depending on where we start. The sequence increments r3 by 4 per instruction (on average). We also replace the exception table for the 4k copy loop by a macro per load or store. These loads and stores all use exactly the same exception handler, which simply resets the argument registers r3, r4 and r5 to there original values and re-does the whole copy using the slower loop. Signed-off-by:
-
zhong jiang authored
for_each_node_by_name() iterators only exit normally when the loop cursor is NULL, So there is no need to call of_node_put(). Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Reviewed-by:
-
Haren Myneni authored
NX increments readOffset by FIFO size in receive FIFO control register when CRB is read. But the index in RxFIFO has to match with the corresponding entry in FIFO maintained by VAS in kernel. Otherwise NX may be processing incorrect CRBs and can cause CRB timeout. VAS FIFO offset is 0 when the receive window is opened during initialization. When the module is reloaded or in kexec boot, readOffset in FIFO control register may not match with VAS entry. This patch adds nx_coproc_init OPAL call to reset readOffset and queued entries in FIFO control register for both high and normal FIFOs. Signed-off-by:
Haren Myneni <haren@us.ibm.com> [mpe: Fixup uninitialized variable warning] Signed-off-by:
-
Haren Myneni authored
Export opal_check_token symbol for modules to check the availability of OPAL calls before using them. Signed-off-by:
-
Randy Dunlap authored
Fix build errors and warnings in t1042rdb_diu.c by adding header files and MODULE_LICENSE(). ../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: data definition has no type or storage class early_initcall(t1042rdb_diu_init); ../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: error: type defaults to 'int' in declaration of 'early_initcall' [-Werror=implicit-int] ../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: parameter names (without types) in function declaration and WARNING: modpost: missing MODULE_LICENSE() in arch/powerpc/platforms/85xx/t1042rdb_diu.o Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Scott Wood <oss@buserror.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
-
Anju T Sudhakar authored
Call trace observed while running perf-fuzzer: CPU: 43 PID: 9088 Comm: perf_fuzzer Not tainted 4.13.0-32-generic #35~lp1746225 task: c000003f776ac900 task.stack: c000003f77728000 NIP: c000000000299b70 LR: c0000000002a4534 CTR: c00000000029bb80 REGS: c000003f7772b760 TRAP: 0700 Not tainted (4.13.0-32-generic) MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24008822 XER: 00000000 CFAR: c000000000299a70 SOFTE: 0 GPR00: c0000000002a4534 c000003f7772b9e0 c000000001606200 c000003fef858908 GPR04: c000003f776ac900 0000000000000001 ffffffffffffffff 0000003fee730000 GPR08: 0000000000000000 0000000000000000 c0000000011220d8 0000000000000002 GPR12: c00000000029bb80 c000000007a3d900 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c000003f776ad090 c000000000c71354 GPR24: c000003fef716780 0000003fee730000 c000003fe69d4200 c000003f776ad330 GPR28: c0000000011220d8 0000000000000001 c0000000014c6108 c000003fef858900 NIP [c000000000299b70] perf_pmu_sched_task+0x170/0x180 LR [c0000000002a4534] __perf_event_task_sched_in+0xc4/0x230 Call Trace: perf_iterate_sb+0x158/0x2a0 (unreliable) __perf_event_task_sched_in+0xc4/0x230 finish_task_switch+0x21c/0x310 __schedule+0x304/0xb80 schedule+0x40/0xc0 do_wait+0x254/0x2e0 kernel_wait4+0xa0/0x1a0 SyS_wait4+0x64/0xc0 system_call+0x58/0x6c Instruction dump: 3beafea0 7faa4800 409eff18 e8010060 eb610028 ebc10040 7c0803a6 38210050 eb81ffe0 eba1ffe8 ebe1fff8 4e800020 <0fe00000> 4bffffbc 60000000 60420000 ---[ end trace 8c46856d314c1811 ]--- The context switch call-backs for thread-imc are defined in sched_task function. So when thread-imc events are grouped with software pmu events, perf_pmu_sched_task hits the WARN_ON_ONCE condition, since software PMUs are assumed not to have a sched_task defined. Patch to move the thread_imc enable/disable opal call back from sched_task to event_[add/del] function Fixes: f74c89bd ("powerpc/perf: Add thread IMC PMU support") Signed-off-by:Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Tested-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Nicholas Piggin authored
The page table fragment allocator uses the main page refcount racily with respect to speculative references. A customer observed a BUG due to page table page refcount underflow in the fragment allocator. This can be caused by the fragment allocator set_page_count stomping on a speculative reference, and then the speculative failure handler decrements the new reference, and the underflow eventually pops when the page tables are freed. Fix this by using a dedicated field in the struct page for the page table fragment allocator. Fixes: 5c1f6ee9 ("powerpc: Reduce PTE table memory wastage") Cc: stable@vger.kernel.org # v3.10+ Reviewed-by:
-
Parth Y Shah authored
Resolved <"foo* bar" should be "foo *bar"> error Signed-off-by:
Parth Y Shah <sparth1292@gmail.com> Signed-off-by:
-
Darren Stevens authored
Pasemi code still uses printk(KERN_ERR/KERN_WARN ... change these to pr_err(, pr_warn(... to match other powerpc arch code. No functional changes. Signed-off-by:
Darren Stevens <darren@stevens-zone.net> [mpe: Unsplit some strings while we're at it] Signed-off-by:
-
Murilo Opsfelder Araujo authored
Call show_user_instructions() in arch/powerpc/kernel/traps.c to dump instructions at faulty location, useful to debugging. Before this patch, an unhandled signal message looked like: pandafault[10524]: segfault (11) at 100007d0 nip 1000061c lr 7fffbd295100 code 2 in pandafault[10000000+10000] After this patch, it looks like: pandafault[10524]: segfault (11) at 100007d0 nip 1000061c lr 7fffbd295100 code 2 in pandafault[10000000+10000] pandafault[10524]: code: 4bfffeec 4bfffee8 3c401002 38427f00 fbe1fff8 f821ffc1 7c3f0b78 3d22fffe pandafault[10524]: code: 392988d0 f93f0020 e93f0020 39400048 <99490000> 39200000 7d234b78 383f0040 Signed-off-by:
Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Signed-off-by:
-
Murilo Opsfelder Araujo authored
show_user_instructions() is a slightly modified version of show_instructions() that allows userspace instruction dump. This will be useful within show_signal_msg() to dump userspace instructions of the faulty location. Here is a sample of what show_user_instructions() outputs: pandafault[10850]: code: 4bfffeec 4bfffee8 3c401002 38427f00 fbe1fff8 f821ffc1 7c3f0b78 3d22fffe pandafault[10850]: code: 392988d0 f93f0020 e93f0020 39400048 <99490000> 39200000 7d234b78 383f0040 The current->comm and current->pid printed can serve as a glue that links the instructions dump to its originator, allowing messages to be interleaved in the logs. Signed-off-by:
-
