- 27 May, 2014 1 commit
-
-
Michal Kazior authored
This fixes failpath when override AC pdev param setup fails and makes other pdev params setting fail as well. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com>
-
- 26 May, 2014 4 commits
-
-
Michal Kazior authored
If ath10k was built into the kernel it could stall booting for 120 seconds by default (60 seconds for each firmware API variant) waiting for firmware files before userspace was ready or filesystems mounted. Fix this by making the core registering asynchronous. This also shoves off about 1 second from boot time on most systems since the driver is now mostly initialized in a worker and modprobe takes very little time to complete. Signed-off-by:
-
Michal Kazior authored
The tasklet is already guaranteed to be killed on the teardown path. Signed-off-by:
-
Michal Kazior authored
This will avoid unnecessary forward declaration of any kind in the future. Signed-off-by:
-
Michal Kazior authored
This prevents protected flag being stripped from undecrypted raw sniffed frames when monitor interface is active. Reported-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Tested-by:
-
- 23 May, 2014 4 commits
-
-
Luciano Coelho authored
The channel_switch_beacon callback is optional, so it doesn't have to be defined if it's not going to do anything useful with it. Both ath9k and ath10k define the callback and just returns. This commit removes them. Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Frederic Danis authored
tmp may be used uninitialized if ath10k_bmi_read_memory() returns an error. Signed-off-by:
Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
Michal Kazior authored
Recently there was a bug discovered that involved hif_stop() being called twice that ended up with a double free_irq() call but it only manifested with multiple MSI interrupts mapping. Catch this kind of a problem early in driver regardless of interrupt mapping. Signed-off-by:
-
Michal Kazior authored
It was possible to call hif_stop() 2 times through ath10k_htc_connect_init() timeout failpath which could lead to double free_irq() kernel splat for multiple MSI interrupt case. Re-order init sequence to avoid this problem. The HTC stop shouldn't stop HIF implicitly since it doesn't implicitly start it. Since the re-ordering required some functions to be split/removed/renamed rename a few functions to make more sense while at it. Reported-By:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
- 22 May, 2014 1 commit
-
-
Ben Greear authored
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled. kvalo: move ar->supp_*_chainmask initialisation to ath10k_mac_register() Signed-off-by:
Avery Pennarun <apenwarr@gmail.com> Signed-off-by:
-
- 16 May, 2014 6 commits
-
-
Marek Kwaczynski authored
Fix sending and receiveing protected managment frames. Lack of protected flag for received protected action frames causes report these frames as unprotected robust action frames. If the driver in AP mode sent frame with protected flag and CCMP header using IEEE80211_KEY_FLAG_SW_MGMT_TX flag, the FW encrypted frames once again. From user side all received SA Query Requests and Responses were skipped and all protected action frames were sent as malformed packets. Signed-off-by:
Marek Kwaczynski <marek.kwaczynski@tieto.com> Signed-off-by:
-
Bartosz Markowski authored
On ARM-based (MSM mach), the pci_assign_resource() is passing some invalid pointers and leading to L2 cache errors, what prevents the PCI communication completly. So far I have not found this funtion to be directly called by any other wifi driver and did not found this assigning needed on any other platform. So removing it completely. Signed-off-by:
Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by:
-
Michal Kazior authored
This can be useful for early initialization debugging, i.e. ROM crashes. Signed-off-by:
-
Michal Kazior authored
Sometimes warm reset works upon retry. It might be related to imperfect warm reset routine, but for now let's just do the retries. This should improve the reliability of some chips that hang/crash with cold reset which is used as a last resort if warm reset fails. Signed-off-by:
-
Michal Kazior authored
Warm reset is now able to recover after device crashes which required a cold reset before. This should greatly reduce chances of getting data bus errors or host system freezes due to buggy cold reset on some chips. kvalo: use ath10k_pci_soc_*() Signed-off-by:
-
Ben Greear authored
Simple typo fix. Signed-off-by:
-
- 14 May, 2014 3 commits
-
-
Michal Kazior authored
Apparently firmware can sometimes report a sequence with the first rx descriptor saying it's not the last MSDU. In that case msdu_chaining value could be overwritten saying it's not a chained MSDU. This in turn led to skb_push panic as the frame could be treated as an A-MSDU instead of a chained MSDU. Reported-By:
-
Michal Kazior authored
msdu_payId was read before txrx tasklet was killed so it was possible to end up using an invalid sk_buff pointer leading to a panic. Make sure to sanitize rx ring sk_buff pointers and make the clean up go through all possible entries and not rely on coherent-DMA mapped u32 index which could be (in theory) corrupted by the device as well. Reported-By:
-
Kalle Valo authored
-
- 13 May, 2014 21 commits
-
-
Jahnavi Meher authored
Signed-off-by:
Jahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The struct cfg80211_chan_def contains additional info to derive the bandwidth and side-band information of the chanspec. This patch adds chandef_to_chanspec() function used in IBSS join and starting AP operation. Reviewed-by:
Franky Lin <frankyl@broadcom.com> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The device is queried about the usability of channels, but it did not take 80MHz channels into consideration. This patch adds processing those chanspecs and clear the NO_80MHZ flag for those control/primary channels. Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The function does not provide any additional functionality and is used only once so just get rid of it. Reviewed-by:
-
Arend van Spriel authored
By default allow 80Mhz in custom regulatory rules of the 5G band so the channels will not be flagged with N0_80MHZ. Reviewed-by:
-
Arend van Spriel authored
Although brcmfmac support several 11ac devices it did not advertise VHT related information to cfg80211. Reviewed-by:
-
Arend van Spriel authored
The channel values used by firmware is handled using conversion functions depending on the type of chip. These functions were already in place but lacked proper support for 80MHz channel definitions. This patch adds the support for that. Reviewed-by:
-
Arend van Spriel authored
In the .start_ap callback cfg80211_get_chandef_type() was used to provide debug log info. However, this causes a warning when the chandef contains VHT channel with 80MHz bandwidth. Avoid the warning by just printing the channel and bandwidth instead. Reviewed-by:
-
Daniel Kim authored
The DISASSOC command needs to be sent to firmware when a connection loss is detected by firmware (e.g., beacon timeout). Otherwise the next connect request fails due to a lingering LINK(down) event from firmware. This patch resolves the issue by using brcmf_link_down() handler, instead of the incomplete duplicated codes. Reviewed-by:
-
Arend van Spriel authored
The driver serializes the nvram firmware file before sending it to the device. This patch enhances this to assure serialized data is properly formatted and provide warnings on syntax failures. Reviewed-by:
-
Hante Meuleman authored
FWS is always queuing frames and using a worker for de-queueing, this is not always efficient for all bus layer. For example SDIO has an internal queue and worker making the queueing of FWS unnecessary. Make it possible to bypass the worker if fws mode is none using a bus interface configuration. For USB bus layer this configuration is set true to have fws provide queueing regardless the fws mode. Reviewed-by:
-
Hante Meuleman authored
Tracking and handling of 802.1x frames is done in two modules, it is more logical and clear to move this to dhd_linux module. Reviewed-by:
-
Hante Meuleman authored
In tx_finalize the hdrpull is performed. For the new protocol msgbuf this is complex, because it does not use protocol headers in front of payload anymore and therefor can not determine interface index in the hdr pulll operation. Move out the hdrpull operation from tx_finalize to make msgbuf implementation easier. Reviewed-by:
-
Daniel Kim authored
Currently firmware roaming support is not reported to cfg80211. This patch reports the support of firmware based roaming when it is enabled. Reviewed-by:
-
Daniel Kim authored
When a BSS provides both 2.4GHz and 5GHz bands, in many cases it makes sense to choose 5GHz. Typically a 5GHz channel is less crowded and has less interference and therefore its performance will be better than a crowded 2.4 GHz channel. This patch configures 'join_pref' to induce firmware to preferably select 5GHz BSS. Reviewed-by:
-
Oleksij Rempel authored
Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
Signed-off-by:
-
Oleksij Rempel authored
and use it. This move need changes in both drivers. Signed-off-by:
-
Oleksij Rempel authored
to fix compile errors Signed-off-by:
-
