- 10 Jul, 2006 34 commits
-
-
NeilBrown authored
The comment gives more details, but I didn't quite have the sequencing write, so there was room for races to leave bits unset in the on-disk bitmap for short periods of time. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
When a device is unplugged, requests are moved from one or two (depending on whether a bitmap is in use) queues to the main request queue. So whenever requests are put on either of those queues, we should make sure the raid5 array is 'plugged'. However we don't. We currently plug the raid5 queue just before putting requests on queues, so there is room for a race. If something unplugs the queue at just the wrong time, requests will be left on the queue and nothing will want to unplug them. Normally something else will plug and unplug the queue fairly soon, but there is a risk that nothing will. Signed-off-by:
-
NeilBrown authored
We introduced 'io_sectors' recently so we could count the sectors that causes io during resync separate from sectors which didn't cause IO - there can be a difference if a bitmap is being used to accelerate resync. However when a speed is reported, we find the number of sectors processed recently by subtracting an oldish io_sectors count from a current 'curr_resync' count. This is wrong because curr_resync counts all sectors, not just io sectors. So, add a field to mddev to store the curren io_sectors separately from curr_resync, and use that in the calculations. Signed-off-by:
-
NeilBrown authored
When an array is started we start one or two threads (two if there is a reshape or recovery that needs to be completed). We currently start these *before* the array is completely set up and in particular before queue->queuedata is set. If the thread actually starts very quickly on another CPU, we can end up dereferencing queue->queuedata and oops. This patch also makes sure we don't try to start a recovery if a reshape is being restarted. Signed-off-by:
-
NeilBrown authored
This has to be done in ->load_super, not ->validate_super Without this, hot-adding devices to an array doesn't always work right - though there is a work around in mdadm-2.5.2 to make this less of an issue. Signed-off-by:
-
NeilBrown authored
I have reports of a problem with raid5 which turns out to be because the raid5 device gets stuck in a 'plugged' state. This shouldn't be able to happen as 3msec after it gets plugged it should get unplugged. However it happens none-the-less. This patch fixes the problem and is a reasonable thing to do, though it might hurt performance slightly in some cases. Until I can find the real problem, we should probably have this workaround in place. Signed-off-by:
-
Jon Smirl authored
screen_info.h doesn't have anything to do with the tty layer and shouldn't be included by tty.h. This patches removes the include and modifies all users to directly include screen_info.h. struct screen_info is mainly used to communicate with the console drivers in drivers/video/console. Note that this patch touches every arch and I have no way of testing it. If there is a mistake the worst thing that will happen is a compile error. [akpm@osdl.org: fix arm build] [akpm@osdl.org: fix alpha build] Signed-off-by:
Jon Smirl <jonsmir@gmail.com> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Jon Smirl authored
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by:
-
Karsten Keil authored
Fix the warnings about the section mismatches for __init* in the HiSax driver. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
Updates my personal entry in the CREDITS file. Signed-off-by:
Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Magnus Damm authored
Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. Signed-off-by:
Magnus Damm <magnus@valinux.co.jp> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Jens Axboe authored
The code really means to mask off the high bits, not assign 0xff. Signed-off-by:
Jens Axboe <axboe@suse.de> Cc: Marcus Meissner <meissner@suse.de> Cc: <stable@kernel.org> Signed-off-by:
-
Jonathan Corbet authored
As I was looking over the get_sb() changes, I stumbled across a little mistake in the documentation updates. Unless we're getting into an interesting new object-oriented realm, I doubt that get_sb() should really return "struct int"... Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Urs Thuermann authored
Updater should use _rcu variant of list_del(). Signed-off-by:
Urs Thuermann <urs@isnogud.escape.de> Acked-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Arjan van de Ven authored
{un}register_die_notifier() is used by kdb... document this so that future "remove dead export" rounds can skip this export. Signed-off-by:Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Ingo Molnar authored
Clean up lockdep on-stack-completion initializer. (This also removes the dependency on waitqueue_lock_key.) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ingo Molnar authored
lockdep_map is embedded into every lock, which blows up data structure sizes all around the kernel. Reduce the class-cache to be for the default class only - that is used in 99.9% of the cases and even if we dont have a class cached, the lookup in the class-hash is lockless. This change reduces the per-lock dep_map overhead by 56 bytes on 64-bit platforms and by 28 bytes on 32-bit platforms. Signed-off-by:
-
Arjan van de Ven authored
Make lockdep print which lock is held, in the "kfree() of a live lock" scenario. Signed-off-by:
-
Ingo Molnar authored
Add more documentation to rwsem.h. Signed-off-by:
-
Andi Kleen authored
- Use printk formatting for indentation - Don't leave NTFS in the default event filter Signed-off-by:
Andi Kleen <ak@suse.de> Acked-by:
-
Andrew Morton authored
Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by:
-
Peter Oberparleiter authored
Change the partition code in fs/partitions/check.c to initialize a newly detected partition's policy field with that of the containing block device (see patch below). My reasoning is that function set_disk_ro() in block/genhd.c modifies the policy field (read-only indicator) of a disk and all contained partitions. When a partition is detected after the call to set_disk_ro(), the policy field of this partition will currently not inherit the disk's policy field. This behavior poses a problem in cases where a block device can be 'logically de- and reactivated' like e.g. the s390 DASD driver because partition detection may run after the policy field has been modified. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Acked-by:
Al Viro <viro@ftp.linux.org.uk> Makes-sense-to: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Chuck Short authored
Patch Description: Add "Specialix IO8+ card support" hotplug support patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=d795cfc591bb44f6b3d86d8f054a227cecb44bb4 [akpm@osdl.org: cleanup] Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Chuck Short <zulcss@gmail.com> Signed-off-by:
-
Chuck Short authored
Patch Description: Add "Computone IntelliPort Plus serial" hotplug support patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=8c36723187c0fa5efe0e5c6a9b1e66ed4b824792 [akpm@osdl.org: cleanup] Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Horms authored
* Document the ip command a little differently to make the interaction between defaults and autoconfiguration a little clearer (I hope) * Update autoconfiguration the current set of options, including DHCP * Update the boot methods to add syslinux and isolinux, and remove dd of=/dev/fd0 which is no longer supported by linux * Add a referance to initramfs along side initrd. Should the latter and its document be removed some time soon? * Various cleanups to put the text consistently into the thrid person * Reformated a bit to fit into 80 columns a bit more nicely * Should the bootloaders documentation be removed or split into a separate documentation, it seems somewhat out of scope Signed-off-by:
Horms <horms@verge.net.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Hisashi Hifumi authored
When write() extends a file(i_size is increased) and fsync() is called, change of inode must be written to journaling area through fsync(). But,currently the i_trans_id is not correctly updated when i_size is increased. So fsync() does not kick the journal writer. Reiserfs_file_write() already updates the transaction when blocks are allocated, but the case when i_size increases and new blocks are not added is not correctly treated. Following patch fix this bug. Signed-off-by:
Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Cc: Hans Reiser <reiser@namesys.com> Signed-off-by:
-
Eric Paris authored
Introduce a new rootcontext= option to FS mounting. This option will allow you to explicitly label the root inode of an FS being mounted before that FS or inode because visible to userspace. This was found to be useful for things like stateless linux, see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=190001Signed-off-by:
Eric Paris <eparis@parisplace.org> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
James Morris <jmorris@namei.org> Signed-off-by:
-
Eric Paris authored
Remove the conflict between fscontext and context mount options. If context= is specified without fscontext it will operate just as before, if both are specified we will use mount point labeling and all inodes will get the label specified by context=. The superblock will be labeled with the label of fscontext=, thus affecting operations which check the superblock security context, such as associate permissions. Signed-off-by:
-
Andreas Mohr authored
- constify and optimize stat_nam (thanks to Michael Tokarev!) - spelling and comment fixes Signed-off-by:
Andreas Mohr <andi@lisas.de> Acked-by:
-
Peter Williams authored
Problem: In the function __migrate_task(), deactivate_task() followed by activate_task() is used to move the task from one run queue to another. This has two undesirable effects: 1. The task's priority is recalculated. (Nowhere else in the scheduler code is the priority recalculated for a change of CPU.) 2. The task's time stamp is set to the current time. At the very least, this makes the adjustment of the time stamp before the call to deactivate_task() redundant but I believe the problem is more serious as the time stamp now holds the time of the queue change instead of the time at which the task was woken. In addition, unless dest_rq is the same queue as "current" is on the time stamp could be inaccurate due to inter CPU drift. Solution: Replace the call to activate_task() with one to __activate_task(). Signed-off-by:
Peter Williams <pwil3058@bigpond.net.au> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andrew Morton authored
Dopey bug. Causes hopelessly-wrong numbers from vmstat(8) and several other counters. Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Andrew Morton authored
arch/x86_64/kernel/e820.c:42: error: 'MAXMEM' undeclared here (not in a function) Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Andrew Morton authored
It's useful to be able to turn off CONFIG_HOTPLUG for compile-coverage testing and for section-checking coverage. But a few things go and select CONFIG_HOTPLUG, making it a royal PITA to turn the thing off. It's only turnable offable if CONFIG_EMBEDDED anyway. So let's make those things depend on HOTPLUG, not select it. Cc: Greg KH <greg@kroah.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Stephane Eranian authored
Use thread info flags to track use of debug registers and IO bitmaps. - add TIF_DEBUG to track when debug registers are active - add TIF_IO_BITMAP to track when I/O bitmap is used - modify __switch_to() to use the new TIF flags Performance tested on Pentium II, ten runs of LMbench context switch benchmark (smaller is better:) before after avg 3.65 3.39 min 3.55 3.33 Signed-off-by:
Stephane Eranian <eranian@hpl.hp.com> Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Acked-by:
-
- 09 Jul, 2006 6 commits
-
-
Linus Torvalds authored
* HEAD: [AX.25]: Use kzalloc [ATM] net/atm/clip.c: fix PROC_FS=n compile [PKT_SCHED]: act_api: Fix module leak while flushing actions [NET]: Fix IPv4/DECnet routing rule dumping [NET] gso: Fix up GSO packets with broken checksums [NET] gso: Add skb_is_gso [IRDA]: fix drivers/net/irda/ali-ircc.c:ali_ircc_init() [ATM]: fix possible recursive locking in skb_migrate() [ATM]: Typo in drivers/atm/Kconfig... [TG3]: add amd8131 to "write reorder" chipsets [NET]: Fix network device interface printk message priority
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (23 commits) [PATCH] 8139too deadlock fix [netdrvr] 3c59x: snip changelog from source code e1000: increase version to 7.1.9-k2 e1000: add ich8lan device ID's e1000: allow user to disable ich8 lock loss workaround e1000: integrate ich8 support into driver e1000: add ich8lan core functions e1000: disable ERT e1000: check return value of _get_speed_and_duplex e1000: M88 PHY workaround e1000: fix adapter led blinking inconsistency e1000: disable CRC stripping workaround e1000: force register write flushes to circumvent broken platforms e1000: rework module param code with uninitialized values e1000: recycle skb e1000: change printk into DPRINTK e1000: add smart power down code e1000: small performance tweak by removing double code e1000: fix CONFIG_PM blocks e1000: Make PHY powerup/down a function ...
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Only the first two bits in bio->bi_rw and rq->flags match [PATCH] blktrace: readahead support [PATCH] blktrace: fix barrier vs sync typo
-
Ralf Baechle authored
Replace kzalloc instead of kmalloc + memset. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Adrian Bunk authored
This patch fixes the following compile error with CONFIG_PROC_FS=n by reverting commit dcdb0275: <-- snip --> ... CC net/atm/clip.o net/atm/clip.c: In function ‘atm_clip_init’: net/atm/clip.c:975: error: ‘atm_proc_root’ undeclared (first use in this function) net/atm/clip.c:975: error: (Each undeclared identifier is reported only once net/atm/clip.c:975: error: for each function it appears in.) net/atm/clip.c:977: error: ‘arp_seq_fops’ undeclared (first use in this function) make[2]: *** [net/atm/clip.o] Error 1 <-- snip --> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Thomas Graf authored
Module reference needs to be given back if message header construction fails. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
