- 11 Aug, 2010 38 commits
-
-
Kyungmin Park authored
Some host controllers such as s5pc110 support the WIDE8 feature. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kyungmin Park authored
When using QUIRK_NONSTANDARD_CLOCK, it checks the set_clock() function which is not used actually. So delete it. Signed-off-by:
-
Maxim Levitsky authored
The current way of disabling it is not well tested by vendor and has all kinds of bugs that show up on resume from ram/disk. A very good example is a dead SDHCI controller. Old way of disabling is still supported by continuing to use CONFIG_MMC_RICOH_MMC. Based on 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html' Therefore most of the credit for this goes to Andrew de Quincey Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Cc: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by:
Philip Langdale <philipl@overt.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Maxim Levitsky authored
If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to suspend, the card will be removed, therefore this patch doesn't change the behavior of this option. However the removal will be done by pm notifier, which runs while userspace is still not frozen and thus can freely use del_gendisk, without the risk of deadlock which would happen otherwise. Card detect workqueue is now disabled while userspace is frozen, Therefore if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during suspend, the removal will be detected as soon as userspace is unfrozen, again at the moment it is safe to call del_gendisk. Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate. [akpm@linux-foundation.org: clean up function prototype] [akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Michal Miroslaw authored
Signed-off-by:
Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Michal Miroslaw authored
This series adds support for SD combo cards to MMC/SD driver stack. SD combo consists of SD memory and SDIO parts in one package. Since the parts have a separate SD command sets, after initialization, they can be treated as independent cards on one bus. Changes are divided into two patches. First is just moving initialization code around so that SD memory part init can be called from SDIO init. Second patch is a proper change enabling SD memory along SDIO. I tried to move as much no-op changes to the first patch so that it's easier to follow the required changes to initialization flow for SDIO cards. This is based on Simplified SDIO spec v.2.00. The init sequence is slightly modified to follow current SD memory init implementation. Command sequences, assuming SD memory and SDIO indeed ignore unknown commands, are the same as before for both parts. This patch: Prepare for SD-combo (IO+mem) support by splitting SD memory card init and related functions. Signed-off-by:
-
Kyungmin Park authored
The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by:
-
Changli Gao authored
Use kmalloc() to allocate fdmem if possible. vmalloc() is used as a fallback solution for fdmem allocation. A new helper function __free_fdtable() is introduced to reduce the lines of code. A potential bug, vfree() a memory allocated by kmalloc(), is fixed. [akpm@linux-foundation.org: use __GFP_NOWARN, uninline alloc_fdmem() and free_fdmem()] Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Avi Kivity <avi@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
John Kacur <jkacur@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Wu Fengguang authored
The O_* bit numbers are defined in 20+ arch/*, and can silently overlap. Add a compile time check to ensure the uniqueness as suggested by David Miller. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Eric Paris <eparis@redhat.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Jamie Lokier <jamie@shareable.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
Tony Battersby authored
Improve the description of fget_light(), which is currently incorrect about needing a prior refcnt (judging by the way it is actually used). Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Randy Dunlap authored
Add <linux/types.h> to <linux/virtio_9p.h> so that types are explicitly defined: linux/virtio_9p.h:15: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by:Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Cc: "James E.J. Bottomley" <James.Bottomley@suse.de> Cc: James Smart <james.smart@emulex.com> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Andrew Morton authored
A couple of scsi drivers define a BIT() macro, duplicating the one in bitops.h. Cc: Jing Huang <huangj@brocade.com> Cc: Robert Love <robert.w.love@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Randy Dunlap authored
bnx2i should depend on NET since it selects SCSI_ISCSI_ATTRS, which depends on NET. Also move the dependencies together. The "depends" change fixes multiple build errors when CONFIG_NET is not enabled: ERROR: "skb_trim" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_create" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_release" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "skb_pull" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "init_net" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "__alloc_skb" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_broadcast" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "kfree_skb" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "skb_put" [drivers/scsi/scsi_transport_iscsi.ko] undefined! Signed-off-by:
-
Randy Dunlap authored
pmcraid should depend on NET since it uses netlink interfaces. This fixes multiple build errors when CONFIG_NET is not enabled: ERROR: "genl_register_family" [drivers/scsi/pmcraid.ko] undefined! ERROR: "genl_unregister_family" [drivers/scsi/pmcraid.ko] undefined! ERROR: "nla_put" [drivers/scsi/pmcraid.ko] undefined! ERROR: "init_net" [drivers/scsi/pmcraid.ko] undefined! ERROR: "__alloc_skb" [drivers/scsi/pmcraid.ko] undefined! ERROR: "netlink_broadcast" [drivers/scsi/pmcraid.ko] undefined! ERROR: "kfree_skb" [drivers/scsi/pmcraid.ko] undefined! ERROR: "skb_put" [drivers/scsi/pmcraid.ko] undefined! Signed-off-by:
-
Peter Korsgaard authored
Commit 9e4f5e29 ("FC Pass Thru support") exported a number of header files in include/scsi to user space, but didn't change the uX types to the userspace-compatible __uX types. Without that you'll get compile errors when including them - E.G.: include/scsi/scsi.h:145: error: expected specifier-qualifier-list before `u8' Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: James Smart <james.smart@emulex.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Roel Kluin authored
It appears that the wrong fcport H2I message was tested Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Jing Huang <huangj@Brocade.COM> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Joe Perches authored
It's an exported symbol of kernel/printk.c Rename vprintk and dprintk macros to more common VPRINTK and DPRINTK Add do { } while(0) around macros Add level to VPRINTK so KERN_CONT can be used a couple of times. Signed-off-by:Joe Perches <joe@perches.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Yong Zhang authored
Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy Signed-off-by:
Yong Zhang <yong.zhang0@gmail.com> Cc: Jing Huang <huangj@brocade.com> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Joe Perches authored
String constants that are continued on subsequent lines with \ will cause spurious whitespace in the resulting output. Signed-off-by:
-
H Hartley Sweeten authored
In sd_store_cache_type the symbol 'len' is declared twice. Remove the second declaration to quiet the following sparse warning. warning: symbol 'len' shadows an earlier one In sd_probe the variable 'index' is declared as a u32. This variable is used in a call to ida_get_new which is expecting an int *. Make the variable an int to quiet the following sparse warning. warning: incorrect type in argument 2 (different signedness) There are 4 symbols in the file that are not exported and produce the following sparse warnings. warning: symbol 'sd_cdb_cache' was not declared. Should it be static? warning: symbol 'sd_cdb_pool' was not declared. Should it be static? warning: symbol 'sd_read_protection_type' was not declared. Should it be static? warning: symbol 'sd_read_app_tag_own' was not declared. Should it be static? Make them static to quiet the warnings. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Dan's list included: drivers/scsi/scsi_lib.c +1365 scsi_kill_request(9) warning: variable derefenced in initializer 'cmd' drivers/scsi/scsi_lib.c +1365 scsi_kill_request(9) warning: variable derefenced before check 'cmd' We dereference cmd (and possible OOPS if cmd == NULL) before starting the request so just remove the superfluous debugging code altogether. [ bart: the potential NULL pointer dereference was finally fixed in (much later than mine) commit 03b14708 but my patch is still valid ] Reported-by:
Dan Carpenter <error27@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eugene Teo <eteo@redhat.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Julia Lawall authored
In each case, the destination of the allocation has type struct **, so the elements of the array should have pointer type, not structure type. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by:
-
Roel Kluin authored
The tag_number reaches dcb->max_command + 1 after the loop, but when the tag_number equals dcb->max_command an error message is already issued. The last iteration therefore appears obsolete. Signed-off-by:
-
Ondrej Zary authored
The ifdefs are broken so the MMIO code is never compiled and so it's broken too. Fix them all. Untested as I don't have the hardware. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Reviewed-by:
Andy Walls <awalls@md.metrocast.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Ondrej Zary authored
Remove misleading error message that appears after pnp card has been detected correctly. Signed-off-by:
-
Alexey Dobriyan authored
Convert everything except ->proc_info() stuff, it is done within separate ->proc_info path series. Problem with ->read_proc et al is described here commit 786d7e16 "Fix rmmod/read/write races in /proc entries" Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Julia Lawall authored
If the NULL test on dev->i2o_dev or i2o_dev is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by:
-
Julia Lawall authored
At the point where cmnd is initialized, it is tested for NULL, so it doesn't have to be tested again here. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by:
-
Roel Kluin authored
Besides keeping the line short, the second setting of the MR_DMA_MODE bit was removed. Signed-off-by:
-
Roel Kluin authored
unmap ccb_phys as well when scsi_add_host() fails Signed-off-by:
-
Roel Kluin authored
Check whether index is within bounds before testing the element. Signed-off-by:
-
Andrew Morton authored
One straggler which was missed due to merge ordering issues. Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
-
Andrew Morton authored
In commit 0dca94ba ("hwmon: coretemp: update hotplug condition check") we merged v2 of this patch. Update that to v3. The difference is to remove the new and unnecesary references to CPU_*_FROZEN. Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Andrew Morton authored
i386 allmodconfig: drivers/net/wireless/libertas/cfg.c: In function 'lbs_scan_worker': drivers/net/wireless/libertas/cfg.c:722: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:722: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cfg.c:722: error: for each function it appears in.) drivers/net/wireless/libertas/cfg.c: In function 'lbs_cfg_connect': drivers/net/wireless/libertas/cfg.c:1267: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'signal_pending' drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'schedule_timeout' So wait.h has a dependency on sched.h, but doesn't include sched.h. This patch doesn't fix that. Cc: Dan Williams <dcbw@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Andrew Morton authored
Fix error introduced by 37ed19d5 ("scripts/mod/modpost.c: fix memory leak"). - don't kfree("") - fix one missed conversion Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
-
- 10 Aug, 2010 2 commits
-
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: (24 commits) md: clean up do_md_stop md: fix another deadlock with removing sysfs attributes. md: move revalidate_disk() back outside open_mutex md/raid10: fix deadlock with unaligned read during resync md/bitmap: separate out loading a bitmap from initialising the structures. md/bitmap: prepare for storing write-intent-bitmap via dm-dirty-log. md/bitmap: optimise scanning of empty bitmaps. md/bitmap: clean up plugging calls. md/bitmap: reduce dependence on sysfs. md/bitmap: white space clean up and similar. md/raid5: export raid5 unplugging interface. md/plug: optionally use plugger to unplug an array during resync/recovery. md/raid5: add simple plugging infrastructure. md/raid5: export is_congested test raid5: Don't set read-ahead when there is no queue md: add support for raising dm events. md: export various start/stop interfaces md: split out md_rdev_init md: be more careful setting MD_CHANGE_CLEAN md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk ...
-
Linus Torvalds authored
As pointed out by Jiri Slaby: when I resolved the the 32-bit x85 system call entry tables for prlimit (due to the conflict with fanotify), I forgot to add the numbering in comments that we do for every fifth entry. Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
