- 04 May, 2019 40 commits
-
-
Wen Yang authored
[ Upstream commit be693df3 ] The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Douglas Miller <dougmill@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org>
-
Wen Yang authored
[ Upstream commit fa3a419d ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 5a698243 ] Specifying a retrans=0 mount parameter to a NFS/TCP mount, is inadvertently causing the NFS client to rewrite any specified timeout parameter to the default of 60 seconds. Fixes: a956beda ("NFS: Allow the mount option retrans=0") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 7cf77b27 ] Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Masanari Iida authored
[ Upstream commit 41b37f4c ] This patch fixes a spelling typo. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Fixes: cc42603d ("ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit fe384e2f ] callers of tcf_gact_goto_chain_index() can potentially read an old value of the chain index, or even dereference a NULL 'goto_chain' pointer, because 'goto_chain' and 'tcfa_action' are read in the traffic path without caring of concurrent write in the control path. The most recent value of chain index can be read also from a->tcfa_action (it's encoded there together with TC_ACT_GOTO_CHAIN bits), so we don't really need to dereference 'goto_chain': just read the chain id from the control action. Fixes: e457d86a ("net: sched: add couple of goto_chain helpers") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Harini Katakam authored
[ Upstream commit cd5afa91 ] Both PCLK and HCLK are "required" clocks according to macb devicetree documentation. There is a chance that devm_clk_get doesn't return a negative error but just a NULL clock structure instead. In such a case the driver proceeds as usual and uses pclk value 0 to calculate MDC divisor which is incorrect. Hence fix the same in clock initialization. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 6a8ca245 ] phydm.internal is allocated using kzalloc which is used multiple times without a check for NULL pointer. This patch avoids such a scenario by returning 0, consistent with the failure case. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 22c971db ] Colin King reported a bug in read_bbreg_hdl(): memcpy(pcmd->rsp, (u8 *)&val, pcmd->rspsz); The problem is that "val" is uninitialized. This code is obviously not useful, but so far as I can tell "pcmd->cmdcode" is never GEN_CMD_CODE(_Read_BBREG) so it's not harmful either. For now the easiest fix is to just call r8712_free_cmd_obj() and return. Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit d70d70ae ] skb allocated via dev_alloc_skb can fail and return a NULL pointer. This patch avoids such a scenario and returns, consistent with other invocations. Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 7671ce0d ] hwxmits is allocated via kcalloc and not checked for failure before its dereference. The patch fixes this problem by returning error upstream in rtl8723bs, rtl8188eu. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 9624bafa ] The ks8851 chip's initial carrier state is down. A Link Change Interrupt is signaled once interrupts are enabled if the carrier is up. The ks8851 driver has it backwards by assuming that the initial carrier state is up. The state is therefore misrepresented if the interface is opened with no cable attached. Fix it. The Link Change interrupt is sometimes not signaled unless the P1MBSR register (which contains the Link Status bit) is read on ->ndo_open(). This might be a hardware erratum. Read the register by calling mii_check_link(), which has the desirable side effect of setting the carrier state to down if the cable was detached while the interface was closed. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit d268f315 ] The ks8851 driver currently requests the IRQ before registering the net_device. Because the net_device name is used as IRQ name and is still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs apart if multiple ks8851 chips are present. Most other drivers delay requesting the IRQ until the net_device is opened. Do the same. The driver doesn't enable interrupts on the chip before opening the net_device and disables them when closing it, so there doesn't seem to be a need to request the IRQ already on probe. Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 761cfa97 ] Commit 73fdeb82 ("net: ks8851: Add optional vdd_io regulator and reset gpio") amended the ks8851 driver to briefly assert the chip's reset pin on probe. It also amended the probe routine's error path to reassert the reset pin if a subsequent initialization step fails. However the commit misplaced reassertion of the reset pin in the error path such that it is not performed if the check of the Chip ID and Enable Register (CIDER) fails. The error path is therefore slightly asymmetrical to the probe routine's body. Fix it. Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 536d3680 ] The ks8851 driver lets the chip auto-dequeue received packets once they have been read in full. It achieves that by setting the ADRFE flag in the RXQCR register ("Auto-Dequeue RXQ Frame Enable"). However if allocation of a packet's socket buffer or retrieval of the packet over the SPI bus fails, the packet will not have been read in full and is not auto-dequeued. Such partial retrieval of a packet confuses the chip's RX queue management: On the next RX interrupt, the first packet read from the queue will be the one left there previously and this one can be retrieved without issues. But for any newly received packets, the frame header status and byte count registers (RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval. The chip allows explicitly dequeueing a packet from the RX queue by setting the RRXEF flag in the RXQCR register ("Release RX Error Frame"). This could be used to dequeue the packet in case of an error, but if that error is a failed SPI transfer, it is unknown if the packet was transferred in full and was auto-dequeued or if it was only transferred in part and requires an explicit dequeue. The safest approach is thus to always dequeue packets explicitly and forgo auto-dequeueing. Without this change, I've witnessed packet retrieval break completely when an SPI DMA transfer fails, requiring a chip reset. Explicit dequeueing magically fixes this and makes packet retrieval absolutely robust for me. The chip's documentation suggests auto-dequeuing and uses the RRXEF flag only to dequeue error frames which the driver doesn't want to retrieve. But that seems to be a fair-weather approach. Signed-off-by:
-
Jarkko Nikula authored
[ Upstream commit 5cd1c56c ] Add PCI ID for Intel Comet Lake PCH. Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Marco Felsch authored
[ Upstream commit 032f85c9 ] Increase the reset duration to ensure correct phy functionality. The reset duration is taken from barebox commit 52fdd510de ("ARM: dts: pfla02: use long enough reset for ethernet phy"): Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Cc: Stefan Christ <s.christ@phytec.de> Cc: Christian Hemp <c.hemp@phytec.de> Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Fixes: 3180f956 ("ARM: dts: Phytec imx6q pfla02 and pbab01 support") Signed-off-by:
-
Guido Kiener authored
[ Upstream commit 091dacc3 ] Restore the status of ep->stopped in function net2272_dequeue(). When the given request is not found in the endpoint queue the function returns -EINVAL without restoring the state of ep->stopped. Thus the endpoint keeps blocked and does not transfer any data anymore. This fix is only compile-tested, since we do not have a corresponding hardware. An analogous fix was tested in the sibling driver. See "usb: gadget: net2280: Fix net2280_dequeue()" Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Guido Kiener authored
[ Upstream commit f1d3fba1 ] When a request must be dequeued with net2280_dequeue() e.g. due to a device clear action and the same request is finished by the function scan_dma_completions() then the function net2280_dequeue() does not find the request in the following search loop and returns the error -EINVAL without restoring the status ep->stopped. Thus the endpoint keeps blocked and does not receive any data anymore. This fix restores the status and does not issue an error message. Acked-by:
-
Guido Kiener authored
[ Upstream commit 9d6a54c1 ] The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size. The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets. With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet. Acked-by:
-
Felipe Balbi authored
[ Upstream commit 7ae622c9 ] This patch simply adds a new PCI Device ID Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 7494cec6 ] Calling kvm_is_visible_gfn() implies that we're parsing the memslots, and doing this without the srcu lock is frown upon: [12704.164532] ============================= [12704.164544] WARNING: suspicious RCU usage [12704.164560] 5.1.0-rc1-00008-g600025238f51-dirty #16 Tainted: G W [12704.164573] ----------------------------- [12704.164589] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage! [12704.164602] other info that might help us debug this: [12704.164616] rcu_scheduler_active = 2, debug_locks = 1 [12704.164631] 6 locks held by qemu-system-aar/13968: [12704.164644] #0: 000000007ebdae4f (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0 [12704.164691] #1: 000000007d751022 (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0 [12704.164726] #2: 00000000219d2706 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164761] #3: 00000000a760aecd (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164794] #4: 000000000ef8e31d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164827] #5: 000000007a872093 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164861] stack backtrace: [12704.164878] CPU: 2 PID: 13968 Comm: qemu-system-aar Tainted: G W 5.1.0-rc1-00008-g600025238f51-dirty #16 [12704.164887] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 [12704.164896] Call trace: [12704.164910] dump_backtrace+0x0/0x138 [12704.164920] show_stack+0x24/0x30 [12704.164934] dump_stack+0xbc/0x104 [12704.164946] lockdep_rcu_suspicious+0xcc/0x110 [12704.164958] gfn_to_memslot+0x174/0x190 [12704.164969] kvm_is_visible_gfn+0x28/0x70 [12704.164980] vgic_its_check_id.isra.0+0xec/0x1e8 [12704.164991] vgic_its_save_tables_v0+0x1ac/0x330 [12704.165001] vgic_its_set_attr+0x298/0x3a0 [12704.165012] kvm_device_ioctl_attr+0x9c/0xd8 [12704.165022] kvm_device_ioctl+0x8c/0xf8 [12704.165035] do_vfs_ioctl+0xc8/0x960 [12704.165045] ksys_ioctl+0x8c/0xa0 [12704.165055] __arm64_sys_ioctl+0x28/0x38 [12704.165067] el0_svc_common+0xd8/0x138 [12704.165078] el0_svc_handler+0x38/0x78 [12704.165089] el0_svc+0x8/0xc Make sure the lock is taken when doing this. Fixes: bf308242 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock") Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit a6ecfb11 ] When halting a guest, QEMU flushes the virtual ITS caches, which amounts to writing to the various tables that the guest has allocated. When doing this, we fail to take the srcu lock, and the kernel shouts loudly if running a lockdep kernel: [ 69.680416] ============================= [ 69.680819] WARNING: suspicious RCU usage [ 69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted [ 69.682096] ----------------------------- [ 69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage! [ 69.683225] [ 69.683225] other info that might help us debug this: [ 69.683225] [ 69.683975] [ 69.683975] rcu_scheduler_active = 2, debug_locks = 1 [ 69.684598] 6 locks held by qemu-system-aar/4097: [ 69.685059] #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0 [ 69.686087] #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0 [ 69.686919] #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.687698] #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.688475] #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.689978] #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [ 69.690729] [ 69.690729] stack backtrace: [ 69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18 [ 69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 [ 69.692831] Call trace: [ 69.694072] lockdep_rcu_suspicious+0xcc/0x110 [ 69.694490] gfn_to_memslot+0x174/0x190 [ 69.694853] kvm_write_guest+0x50/0xb0 [ 69.695209] vgic_its_save_tables_v0+0x248/0x330 [ 69.695639] vgic_its_set_attr+0x298/0x3a0 [ 69.696024] kvm_device_ioctl_attr+0x9c/0xd8 [ 69.696424] kvm_device_ioctl+0x8c/0xf8 [ 69.696788] do_vfs_ioctl+0xc8/0x960 [ 69.697128] ksys_ioctl+0x8c/0xa0 [ 69.697445] __arm64_sys_ioctl+0x28/0x38 [ 69.697817] el0_svc_common+0xd8/0x138 [ 69.698173] el0_svc_handler+0x38/0x78 [ 69.698528] el0_svc+0x8/0xc The fix is to obviously take the srcu lock, just like we do on the read side of things since bf308242. One wonders why this wasn't fixed at the same time, but hey... Fixes: bf308242 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock") Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit ebff0b0e ] We've become very cautious to now always reset the vcpu when nothing is loaded on the physical CPU. To do so, we now disable preemption and do a kvm_arch_vcpu_put() to make sure we have all the state in memory (and that it won't be loaded behind out back). This now causes issues with resetting the PMU, which calls into perf. Perf itself uses mutexes, which clashes with the lack of preemption. It is worth realizing that the PMU is fully emulated, and that no PMU state is ever loaded on the physical CPU. This means we can perfectly reset the PMU outside of the non-preemptible section. Fixes: e761a927 ("KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded") Reported-by:
Julien Grall <julien.grall@arm.com> Tested-by:
-
Petr Štetiar authored
[ Upstream commit 72ff51d8 ] Andrey has reported on OpenWrt's bug tracking system[1], that he currently can't use ar93xx_uart as pure serial UART without console (CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined), because compilation ends with following error: ar933x_uart.c: In function 'ar933x_uart_console_write': ar933x_uart.c:550:14: error: 'struct uart_port' has no member named 'sysrq' So this patch moves all the code related to console handling behind series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2152 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrey Batyiev <batyiev@gmail.com> Reported-by:
Andrey Batyiev <batyiev@gmail.com> Tested-by:
Petr Štetiar <ynezz@true.cz> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit ac0cdb3d ] Add the missing uart_unregister_driver() and i2c_del_driver() before return from sc16is7xx_init() in the error handling case. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Reviewed-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 0c17e83f ] The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm/mach-imx/mach-imx51.c:64:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 57, but without a corresponding object release within this function. Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 7221b727 ] The ucast IP table is utilized by some of the L3-specific sysfs attributes that qeth_l3_create_device_attributes() provides. So initialize the table _before_ registering the attributes. Fixes: ebccc739 ("s390/qeth: add missing hash table initializations") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 6d65561f ] skb_header_pointer may return NULL. The current code dereference its return values without a NULL check. The fix inserts the checks to avoid NULL pointer dereferences. Fixes: 202a8ff5 ("netfilter: add IPv6 segment routing header 'srh' match") Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit d1fa3810 ] With NETFILTER_XT_TARGET_TEE=y and IP6_NF_IPTABLES=m, we get a link error when referencing the NF_DUP_IPV6 module: net/netfilter/xt_TEE.o: In function `tee_tg6': xt_TEE.c:(.text+0x14): undefined reference to `nf_dup_ipv6' The problem here is the 'select NF_DUP_IPV6 if IP6_NF_IPTABLES' that forces NF_DUP_IPV6 to be =m as well rather than setting it to =y as was intended here. Adding a soft dependency on IP6_NF_IPTABLES avoids that broken configuration. Fixes: 5d400a49 ("netfilter: Kconfig: Change select IPv6 dependencies") Cc: Máté Eckl <ecklm94@gmail.com> Cc: Taehee Yoo <ap420073@gmail.com> Link: https://patchwork.ozlabs.org/patch/999498/ Link: https://lore.kernel.org/patchwork/patch/960062/Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit e166e4fd ] Since Commit 21d1196a ("ipv4: set transport header earlier"), skb->transport_header has been always set before entering INET netfilter. This patch is to set skb->transport_header for bridge before entering INET netfilter by bridge-nf-call-iptables. It also fixes an issue that sctp_error() couldn't compute a right csum due to unset skb->transport_header. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Suggested-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 05b7639d ] Otherwise, we hit bogus ENOENT when removing elements. Fixes: e701001e ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Reported-by:
Václav Zindulka <vaclav.zindulka@tlapnet.cz> Signed-off-by:
-
Maxim Zhukov authored
[ Upstream commit 90cd9bed ] Add depends on PCI for PCI_MT7621 Signed-off-by:
Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1beea620 ] When building without CONFIG_OF, the compiler loses track of the flow control in axis_fifo_probe(), and thinks that many variables are used without an initialization even though we actually leave the function before the first use: drivers/staging/axis-fifo/axis-fifo.c: In function 'axis_fifo_probe': drivers/staging/axis-fifo/axis-fifo.c:900:5: error: 'rxd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (rxd_tdata_width != 32) { ^ drivers/staging/axis-fifo/axis-fifo.c:907:5: error: 'txd_tdata_width' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (txd_tdata_width != 32) { ^ drivers/staging/axis-fifo/axis-fifo.c:914:5: error: 'has_tdest' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (has_tdest) { ^ drivers/staging/axis-fifo/axis-fifo.c:919:5: error: 'has_tid' may be used uninitialized in this function [-Werror=maybe-uninitialized] When CONFIG_OF is set, this does not happen, and since the driver cannot work without it, just add that option as a Kconfig dependency. Signed-off-by:
-
Björn Töpel authored
[ Upstream commit 044175a0 ] When the umem is cleaned up, the task that created it might already be gone. If the task was gone, the xdp_umem_release function did not free the pages member of struct xdp_umem. It turned out that the task lookup was not needed at all; The code was a left-over when we moved from task accounting to user accounting [1]. This patch fixes the memory leak by removing the task lookup logic completely. [1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/ Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/ Fixes: c0c77d8f ("xsk: add user memory registration support sockopt") Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 5bf7295f ] netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 80acbed9 ] Commit 0e80bdc9 ("stmmac: first frame prep at the end of xmit routine") overlooked jumbo frames when re-ordering the code, and as a result the own bit was not getting set anymore for the first jumbo frame descriptor. Commit 487e2e22 ("net: stmmac: Set OWN bit for jumbo frames") tried to fix this, but now the bit is getting set too early and the DMA may start while we are still setting up the remaining descriptors. And with the chain mode the own bit remains still unset. Fix by setting the own bit at the end of xmit also with jumbo frames. Fixes: 0e80bdc9 ("stmmac: first frame prep at the end of xmit routine") Fixes: 487e2e22 ("net: stmmac: Set OWN bit for jumbo frames") Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 19b39a25 ] genlmsg_reply can fail, so propagate its return code Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 2795e8c2 ] In case alloc_ordered_workqueue fails, the fix releases sources and returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit cd479ecc ] For a 64-bit process the randomization of the program break is quite large with 1GB. That is as big as the randomization of the anonymous mapping base, for a test case started with '/lib/ld64.so.1 <exec>' it can happen that the heap is placed after the stack. To avoid this limit the program break randomization to 32MB for 64-bit and keep 8MB for 31-bit. Reported-by:
Stefan Liebler <stli@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
