- 07 Aug, 2017 18 commits
-
-
Ben Skeggs authored
commit 38bcb208 upstream. Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ilia Mirkin authored
commit a90e049c upstream. GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff1 ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Sinclair Yeh authored
commit fcfffdd8 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Ofer Heifetz authored
commit 7e96d559 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by:
Ofer Heifetz <oferh@marvell.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Paul Mackerras authored
commit e4705715 upstream. Commit 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly", 2017-06-15) added code to read transactional memory (TM) registers but forgot to enable TM before doing so. The result is that if userspace does have live values in the TM registers, a KVM_RUN ioctl will cause a host kernel crash like this: [ 181.328511] Unrecoverable TM Unavailable Exception f60 at d00000001e7d9980 [ 181.328605] Oops: Unrecoverable TM Unavailable Exception, sig: 6 [#1] [ 181.328613] SMP NR_CPUS=2048 [ 181.328613] NUMA [ 181.328618] PowerNV [ 181.328646] Modules linked in: vhost_net vhost tap nfs_layout_nfsv41_files rpcsec_gss_krb5 nfsv4 dns_resolver nfs +fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat +nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables +ip6table_filter ip6_tables iptable_filter bridge stp llc kvm_hv kvm nfsd ses enclosure scsi_transport_sas ghash_generic +auth_rpcgss gf128mul xts sg ctr nfs_acl lockd vmx_crypto shpchp ipmi_powernv i2c_opal grace ipmi_devintf i2c_core +powernv_rng sunrpc ipmi_msghandler ibmpowernv uio_pdrv_genirq uio leds_powernv powernv_op_panel ip_tables xfs sd_mod +lpfc ipr bnx2x libata mdio ptp pps_core scsi_transport_fc libcrc32c dm_mirror dm_region_hash dm_log dm_mod [ 181.329278] CPU: 40 PID: 9926 Comm: CPU 0/KVM Not tainted 4.12.0+ #1 [ 181.329337] task: c000003fc6980000 task.stack: c000003fe4d80000 [ 181.329396] NIP: d00000001e7d9980 LR: d00000001e77381c CTR: d00000001e7d98f0 [ 181.329465] REGS: c000003fe4d837e0 TRAP: 0f60 Not tainted (4.12.0+) [ 181.329523] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> [ 181.329527] CR: 24022448 XER: 00000000 [ 181.329608] CFAR: d00000001e773818 SOFTE: 1 [ 181.329608] GPR00: d00000001e77381c c000003fe4d83a60 d00000001e7ef410 c000003fdcfe0000 [ 181.329608] GPR04: c000003fe4f00000 0000000000000000 0000000000000000 c000003fd7954800 [ 181.329608] GPR08: 0000000000000001 c000003fc6980000 0000000000000000 d00000001e7e2880 [ 181.329608] GPR12: d00000001e7d98f0 c000000007b19000 00000001295220e0 00007fffc0ce2090 [ 181.329608] GPR16: 0000010011886608 00007fff8c89f260 0000000000000001 00007fff8c080028 [ 181.329608] GPR20: 0000000000000000 00000100118500a6 0000010011850000 0000010011850000 [ 181.329608] GPR24: 00007fffc0ce1b48 0000010011850000 00000000d673b901 0000000000000000 [ 181.329608] GPR28: 0000000000000000 c000003fdcfe0000 c000003fdcfe0000 c000003fe4f00000 [ 181.330199] NIP [d00000001e7d9980] kvmppc_vcpu_run_hv+0x90/0x6b0 [kvm_hv] [ 181.330264] LR [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm] [ 181.330322] Call Trace: [ 181.330351] [c000003fe4d83a60] [d00000001e773478] kvmppc_set_one_reg+0x48/0x340 [kvm] (unreliable) [ 181.330437] [c000003fe4d83b30] [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm] [ 181.330513] [c000003fe4d83b50] [d00000001e7700b4] kvm_arch_vcpu_ioctl_run+0x114/0x2a0 [kvm] [ 181.330586] [c000003fe4d83bd0] [d00000001e7642f8] kvm_vcpu_ioctl+0x598/0x7a0 [kvm] [ 181.330658] [c000003fe4d83d40] [c0000000003451b8] do_vfs_ioctl+0xc8/0x8b0 [ 181.330717] [c000003fe4d83de0] [c000000000345a64] SyS_ioctl+0xc4/0x120 [ 181.330776] [c000003fe4d83e30] [c00000000000b004] system_call+0x58/0x6c [ 181.330833] Instruction dump: [ 181.330869] e92d0260 e9290b50 e9290108 792807e3 41820058 e92d0260 e9290b50 e9290108 [ 181.330941] 792ae8a4 794a1f87 408204f4 e92d0260 <7d4022a6> f9490ff0 e92d0260 7d4122a6 [ 181.331013] ---[ end trace 6f6ddeb4bfe92a92 ]--- The fix is just to turn on the TM bit in the MSR before accessing the registers. Fixes: 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly") Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Herbert Xu authored
commit 41cdf7a4 upstream. When authencesn is used together with digest_null a crash will occur on the decrypt path. This is because normally we perform a special setup to preserve the ESN, but this is skipped if there is no authentication. However, on the post-authentication path it always expects the preservation to be in place, thus causing a crash when digest_null is used. This patch fixes this by also skipping the post-processing when there is no authentication. Fixes: 104880a6 ("crypto: authencesn - Convert to new AEAD...") Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Benjamin Coddington authored
commit b7dbcc0e upstream. nfs4_retry_setlk() sets the task's state to TASK_INTERRUPTIBLE within the same region protected by the wait_queue's lock after checking for a notification from CB_NOTIFY_LOCK callback. However, after releasing that lock, a wakeup for that task may race in before the call to freezable_schedule_timeout_interruptible() and set TASK_WAKING, then freezable_schedule_timeout_interruptible() will set the state back to TASK_INTERRUPTIBLE before the task will sleep. The result is that the task will sleep for the entire duration of the timeout. Since we've already set TASK_INTERRUPTIBLE in the locked section, just use freezable_schedule_timout() instead. Fixes: a1d617d8 ("nfs: allow blocking locks to be awoken by lock callbacks") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
NeilBrown authored
commit 442ce049 upstream. Prior to commit ca0daa27 ("NFS: Cache aggressively when file is open for writing"), NFS would revalidate, or invalidate, the file size when taking a lock. Since that commit it only invalidates the file content. If the file size is changed on the server while wait for the lock, the client will have an incorrect understanding of the file size and could corrupt data. This particularly happens when writing beyond the (supposed) end of file and can be easily be demonstrated with posix_fallocate(). If an application opens an empty file, waits for a write lock, and then calls posix_fallocate(), glibc will determine that the underlying filesystem doesn't support fallocate (assuming version 4.1 or earlier) and will write out a '0' byte at the end of each 4K page in the region being fallocated that is after the end of the file. NFS will (usually) detect that these writes are beyond EOF and will expand them to cover the whole page, and then will merge the pages. Consequently, NFS will write out large blocks of zeroes beyond where it thought EOF was. If EOF had moved, the pre-existing part of the file will be over-written. Locking should have protected against this, but it doesn't. This patch restores the use of nfs_zap_caches() which invalidated the cached attributes. When posix_fallocate() asks for the file size, the request will go to the server and get a correct answer. Fixes: ca0daa27 ("NFS: Cache aggressively when file is open for writing") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Laurent Vivier authored
commit 4fd1bd44 upstream. As for commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"), the call to of_node_put() must be removed from pSeries_reconfig_remove_node(). dlpar_detach_node() and pSeries_reconfig_remove_node() both call of_detach_node(), and thus the node should not be released in both cases. Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Helge Deller authored
commit 56188832 upstream. Some machines can't power off the machine, so disable the lockup detectors to avoid this watchdog BUG to show up every few seconds: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-shutdow:1] Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
John David Anglin authored
commit 56008c04 upstream. It's always bothered me that we only disable preemption in copy_user_page around the call to flush_dcache_page_asm. This patch extends this to after the copy. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
John David Anglin authored
commit ae7a609c upstream. Helge noticed that we flush the TLB page in flush_cache_page but not in flush_cache_range or flush_cache_mm. For a long time, we have had random segmentation faults building packages on machines with PA8800/8900 processors. These machines only support equivalent aliases. We don't see these faults on machines that don't require strict coherency. So, it appears TLB speculation sometimes leads to cache corruption on machines that require coherency. This patch adds TLB flushes to flush_cache_range and flush_cache_mm when coherency is required. We only flush the TLB in flush_cache_page when coherency is required. The patch also optimizes flush_cache_range. It turns out we always have the right context to use flush_user_dcache_range_asm and flush_user_icache_range_asm. The patch has been tested for some time on rp3440, rp3410 and A500-44. It's been boot tested on c8000. No random segmentation faults were observed during testing. Signed-off-by:
-
Daniel Dadap authored
commit 74ec1181 upstream. Add codec IDs for several recently released, pending, and historical NVIDIA GPU audio controllers to the patch table, to allow the correct patch functions to be selected for them. Signed-off-by:
Daniel Dadap <ddadap@nvidia.com> Reviewed-by:
Andy Ritger <aritger@nvidia.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andy Shevchenko authored
commit 610e1ae9 upstream. The commit b56fa687 ("ALSA: fm801: detect FM-only card earlier") rearranged initialization calls, i.e. it makes snd_fm801_chip_init() to be called before we register interrupt handler and set PCI bus mastering. Somehow it prevents FM801-AU to work properly. Thus, partially revert initialization order changed by commit mentioned above. Fixes: b56fa687 ("ALSA: fm801: detect FM-only card earlier") Reported-by:
Émeric MASCHINO <emeric.maschino@gmail.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jan Kara authored
commit 9bcf66c7 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __jfs_set_acl() into jfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101 CC: jfs-discussion@lists.sourceforge.net Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
Eric Dumazet authored
commit b2504a5d upstream. Dmitry reported warnings occurring in __skb_gso_segment() [1] All SKB_GSO_DODGY producers can allow user space to feed packets that trigger the current check. We could prevent them from doing so, rejecting packets, but this might add regressions to existing programs. It turns out our SKB_GSO_DODGY handlers properly set up checksum information that is needed anyway when packets needs to be segmented. By checking again skb_needs_check() after skb_mac_gso_segment(), we should remove these pesky warnings, at a very minor cost. With help from Willem de Bruijn [1] WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1 ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20 Call Trace: [<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 [<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179 [<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565 [<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 [<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706 [<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline] [<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969 [<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383 [<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424 [<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline] [<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955 [<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline] [<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631 [<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954 [<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988 [<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline] [<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995 [<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
Joel Fernandes authored
commit 10970449 upstream. Currently pstore has a global spinlock for all zones. Since the zones are independent and modify different areas of memory, there's no need to have a global lock, so we should use a per-zone lock as introduced here. Also, when ramoops's ftrace use-case has a FTRACE_PER_CPU flag introduced later, which splits the ftrace memory area into a single zone per CPU, it will eliminate the need for locking. In preparation for this, make the locking optional. Signed-off-by:
Joel Fernandes <joelaf@google.com> [kees: updated commit message] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Yuejie Shi authored
commit 89e357d8 upstream. A dump may come in the middle of another dump, modifying its dump structure members. This race condition will result in NULL pointer dereference in kernel. So add a lock to prevent that race. Fixes: 83321d6b ("[AF_KEY]: Dump SA/SP entries non-atomically") Signed-off-by:
Yuejie Shi <syjcnss@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
- 27 Jul, 2017 22 commits
-
-
Greg Kroah-Hartman authored
-
Greg Hackmann authored
Commit ff86bf0c ("alarmtimer: Rate limit periodic intervals") sets a minimum bound on the alarm timer interval. This minimum bound shouldn't be applied if the interval is 0. Otherwise, one-shot timers will be converted into periodic ones. Fixes: ff86bf0c ("alarmtimer: Rate limit periodic intervals") Reported-by:
Ben Fennema <fennema@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Cc: stable@vger.kernel.org Cc: John Stultz <john.stultz@linaro.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chunyu Hu authored
commit db9108e0 upstream. Hit the kmemleak when executing instance_rmdir, it forgot releasing mem of tracing_cpumask. With this fix, the warn does not appear any more. unreferenced object 0xffff93a8dfaa7c18 (size 8): comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s) hex dump (first 8 bytes): ff ff ff ff ff ff ff ff ........ backtrace: [<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280 [<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30 [<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10 [<ffffffff88571ab0>] instance_mkdir+0x90/0x240 [<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70 [<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0 [<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100 [<ffffffff88403857>] do_syscall_64+0x67/0x150 [<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com Fixes: ccfe9e42 ("tracing: Make tracing_cpumask available for all instances") Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Sudeep Holla authored
commit 975e83cf upstream. If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets the PM domain for the device unconditionally. When subsequent attempts are made to call genpd_dev_pm_attach, it may return -EEXISTS checking dev->pm_domain without re-attempting to call attach_dev or power_on. platform_drv_probe then attempts to call drv->probe as the return value -EEXIST != -EPROBE_DEFER, which may end up in a situation where the device is accessed without it's power domain switched on. Fixes: f104e1e5 (PM / Domains: Re-order initialization of generic_pm_domain_data) Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jan Kara authored
commit 6883cd7f upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __reiserfs_set_acl() into reiserfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101 CC: reiserfs-devel@vger.kernel.org Signed-off-by:
-
Bjorn Andersson authored
commit d50daa2a upstream. Include the OF-based modalias in the uevent sent when registering SPMI devices, so that user space has a chance to autoload the kernel module for the device. Tested-by:
Rob Clark <robdclark@gmail.com> Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Stephen Boyd authored
commit 7a3b7cd3 upstream. The ULPI bus can be built as a module, and it will soon be calling these functions when it supports probing devices from DT. Export them so they can be used by the ULPI module. Acked-by:
Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Prarit Bhargava authored
commit 7e700d2c upstream. nfit_init() calls nfit_mce_register() on module load. When the module load fails the nfit mce decoder is not unregistered. The module's memory is freed leaving the decoder chain referencing junk. This will cause panics as future registrations will reference the free'd memory. Unregister the nfit mce decoder on module init failure. [v2]: register and then unregister mce handler to avoid losing mce events [v3]: also cleanup nfit workqueue Fixes: 6839a6d9 ("nfit: do an ARS scrub on hitting a latent media error") Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: "Lee, Chun-Yi" <joeyli.kernel@gmail.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: lszubowi@redhat.com Acked-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Amir Goldstein authored
commit 8fc646b4 upstream. On failure to prepare_creds(), mount fails with a random return value, as err was last set to an integer cast of a valid lower mnt pointer or set to 0 if inodes index feature is enabled. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3fe6e52f ("ovl: override creds with the ones from ...") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Jan Kara authored
commit 84969465 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by creating __hfsplus_set_posix_acl() function that does not call posix_acl_update_mode() and use it when inheriting ACLs. That prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101Signed-off-by:
-
Bart Van Assche authored
commit 99975cd4 upstream. ib_map_mr_sg() can pass an SG-list to .map_mr_sg() that is larger than what fits into a single MR. .map_mr_sg() must not attempt to map more SG-list elements than what fits into a single MR. Hence make sure that mlx5_ib_sg_to_klms() does not write outside the MR klms[] array. Fixes: b005d316 ("mlx5: Add arbitrary sg list support") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Israel Rukshin <israelr@mellanox.com> Acked-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Imre Deak authored
commit 636c4c3e upstream. Currently we may process up/down message transactions containing uninitialized data. This can happen if there was an error during the reception of any message in the transaction, but we happened to receive the last message correctly with the end-of-message flag set. To avoid this abort the reception of the transaction when the first error is detected, rejecting any messages until a message with the start-of-message flag is received (which will start a new transaction). This is also what the DP 1.4 spec 2.11.8.2 calls for in this case. In addtion this also prevents receiving bogus transactions without the first message with the the start-of-message flag set. v2: - unchanged v3: - git add the part that actually skips messages after an error in drm_dp_sideband_msg_build() Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude <lyude@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719134632.13366-1-imre.deak@intel.comSigned-off-by:
-
Imre Deak authored
commit 7f8b3987 upstream. In case of an unknown broadcast message is sent mstb will remain unset, so check for this. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Imre Deak authored
commit 448421b5 upstream. Handle any error due to partial reads, timeouts etc. to avoid parsing uninitialized data subsequently. Also bail out if the parsing itself fails. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ismail, Mustafa authored
commit a62ab66b upstream. Initialize the port_num for iWARP in rdma_init_qp_attr. Fixes: 5ecce4c9("Check port number supplied by user verbs cmds") Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Tested-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Yan, Zheng authored
commit 84583cfb upstream. For a large directory, program needs to issue multiple readdir syscalls to get all dentries. When there are multiple programs read the directory concurrently. Following sequence of events can happen. - program calls readdir with pos = 2. ceph sends readdir request to mds. The reply contains N1 entries. ceph adds these N1 entries to readdir cache. - program calls readdir with pos = N1+2. The readdir is satisfied by the readdir cache, N2 entries are returned. (Other program calls readdir in the middle, which fills the cache) - program calls readdir with pos = N1+N2+2. ceph sends readdir request to mds. The reply contains N3 entries and it reaches directory end. ceph adds these N3 entries to the readdir cache and marks directory complete. The second readdir call does not update fi->readdir_cache_idx. ceph add the last N3 entries to wrong places. Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 566e1ce2 upstream. We now get a helpful warning for code that calls copy_{from,to}_iter without checking the return value, introduced by commit aa28de27 ("iov_iter/hardening: move object size checks to inlined part"). drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_send': drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1643:2: error: ignoring return value of 'copy_from_iter', declared with attribute warn_unused_result [-Werror=unused-result] drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_recv': drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1744:3: error: ignoring return value of 'copy_to_iter', declared with attribute warn_unused_result [-Werror=unused-result] In case we get short copies here, we may get incorrect behavior. I've added failure handling for both rx and tx now, returning -EFAULT as expected. Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Teddy Wang authored
commit 740c433e upstream. If vesafb is enabled in the config then /dev/fb0 is created by vesa and this sm750 driver gets fb1, fb2. But we need to be fb0 and fb1 to effectively work with xorg. So if it has been alloted fb1, then try to remove the other fb0. In the previous send, why #ifdef is used was asked. https://lkml.org/lkml/2017/6/25/57 Answered at: https://lkml.org/lkml/2017/6/25/69 Also pasting here for reference. 'Did a quick research into "why". The patch d8801e4d ("x86/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device") has started setting IORESOURCE_ROM_SHADOW in flags for a default VGA device and that is being done only for x86. And so, we will need that #ifdef to check IORESOURCE_ROM_SHADOW as that needs to be checked only for a x86 and not for other arch.' Signed-off-by:
Teddy Wang <teddy.wang@siliconmotion.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Ian Abbott authored
commit 15d51931 upstream. As reported by Éric Piel on the Comedi mailing list (see <https://groups.google.com/forum/#!topic/comedi_list/ueZiR7vTLOU/discussion>), the analog output asynchronous commands are running too fast with a period 50 ns shorter than it should be. This affects all boards with AO command support that are supported by the "ni_pcimio", "ni_atmio", and "ni_mio_cs" drivers. This is a regression bug introduced by commit 080e6795 ("staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd"), specifically, this line in `ni_ao_cmd_set_update()`: /* following line: N-1 per STC */ ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG); The `trigvar` variable value comes from a call to `ni_ns_to_timer()` which converts a timer period in nanoseconds to a hardware divisor value. The function already reduces the divisor by 1 as required by the hardware, so the above line should not reduce it further by 1. Fix it by replacing `trigvar` by `trigvar - 1` in the above line, and remove the misleading comment. Reported-by:
Éric Piel <piel@delmic.com> Fixes: 080e6795 ("staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd") Cc: Éric Piel <piel@delmic.com> Cc: Spencer E. Olson <olsonse@umich.edu> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Michael Gugino authored
commit 5a1d4c5d upstream. Add support for USB Device TP-Link TL-WN722N v2. VendorID: 0x2357, ProductID: 0x010c Signed-off-by:
Michael Gugino <michael.gugino.2@gmail.com> Signed-off-by:
-
Ingo Molnar authored
commit 6a8a75f3 upstream. This reverts commit cc1582c2. This commit introduced a regression that broke rr-project, which uses sampling events to receive a signal on overflow (but does not care about the contents of the sample). These signals are critical to the correct operation of rr. There's been some back and forth about how to fix it - but to not keep applications in limbo queue up a revert. Reported-by:
Kyle Huey <me@kylehuey.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20170628105600.GC5981@leverpostejSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jin Yao authored
commit 80f62589 upstream. When the jump instruction is displayed at the row 0 in annotate view, the arrow is broken. An example: 16.86 │ ┌──je 82 0.01 │ movsd (%rsp),%xmm0 │ movsd 0x8(%rsp),%xmm4 │ movsd 0x8(%rsp),%xmm1 │ movsd (%rsp),%xmm3 │ divsd %xmm4,%xmm0 │ divsd %xmm3,%xmm1 │ movsd (%rsp),%xmm2 │ addsd %xmm1,%xmm0 │ addsd %xmm2,%xmm0 │ movsd %xmm0,(%rsp) │82: sub $0x1,%ebx 83.03 │ ↑ jne 38 │ add $0x10,%rsp │ xor %eax,%eax │ pop %rbx │ ← retq The patch increments the row number before checking with 0. Signed-off-by:
Yao Jin <yao.jin@linux.intel.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 944e1abe ("perf ui browser: Add method to draw up/down arrow line") Link: http://lkml.kernel.org/r/1496901704-30275-1-git-send-email-yao.jin@linux.intel.comSigned-off-by:
-
