- 05 Jan, 2016 1 commit
-
-
Adrien Schildknecht authored
acpi_video_handles_brightness_key_presses() may use an uninitialized mutex. The error has been reported by lockdep: DEBUG_LOCKS_WARN_ON(l->magic != l). The function assumes that the video driver has been registered before being called. As explained in the comment of acpi_video_init(), the registration of the video class may be defered and thus may not take place in the init function of the module. Use completion mechanisms to make sure that acpi_video_handles_brightness_key_presses() wait for the completion of acpi_video_register() before using the mutex. Also get rid of register_count since task completion can replace it. Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 01 Jan, 2016 6 commits
-
-
Aaron Lu authored
The native interface on SAMSUNG 530U4E/540U4E doesn't work even though the firmware claims Win8 compatible while the acpi_video interface works, add a quirk for this. Link: https://bugzilla.kernel.org/show_bug.cgi?id=108971Reported-and-tested-by: adam bk <adamdd55@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Hans de Goede authored
The Dell Vostro V131 has an especially broken acpi-video implementation. The backlight control bits work, but when the brightness is changed via the acpi-video interface the backlight flickers annoyingly before settling at the new brightness, switching to using the native interface fixes the flickering so add a quirk for this (the vendor interface has the same problem). Brightness keypresses reported through the acpi-video-bus are also broken, they get reported one event delayed, so if you press the brightness-up hotkey on the keyboard nothing happens, then if you press brightness-down, the previous brightness-up event gets reported. Since the keypresses are also reported via wmi (if active) and via atkbd (when wmi is not active) add a quirk to simply filter out the delayed (broken) events. Reported-and-tested-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Hans de Goede authored
Add a module option to disable the reporting of keypresses, in some buggy firmware implementatinon, the reported events are wrong. E.g. they lag reality by one event in the case triggering the writing of this patch. In this case it is better to not forward these wrong events to userspace (esp.) when there is another source of the same events which is not buggy. Note this is only intended to work around implementations which send events which are plain wrong. In some cases we get double events, e.g. from both acpi-video and the atkbd driver, in this case acpi-video is considered the canonical source, and the events from the other source should be filtered (using e.g. /lib/udev/hwdb.d/60-keyboard.hwdb). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Hans de Goede authored
Use the new acpi_video_handles_brightness_key_presses function to check if we should report brightness key-presses. This makes the code both easier to read and makes it properly report key-presses when acpi-video is not reporting them for reasons other then the backlight type being vendor. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Hans de Goede authored
Use the new acpi_video_handles_brightness_key_presses function to check if we should report brightness key-presses. This makes the code both easier to read and makes it properly report key-presses when acpi-video is not reporting them for reasons other then the backlight type being vendor. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Hans de Goede authored
Several drivers want to know if the acpi-video is generating key-presses for brightness change hotkeys to avoid sending double key-events to userspace for these. Currently these driver use this construct for this: if (acpi_video_get_backlight_type() == acpi_backlight_vendor) report_brightness_key_event(); This indirect way of detecting if acpi-video is active does not make the code easier to understand, and in some cases it is wrong because just because the preferred type != vendor does not mean that acpi-video is actually listening for brightness events, e.g. there may be no acpi-video bus on the system at all. This commit adds a acpi_video_handles_brightness_key_presses() helper function, making the code needing this functionality both easier to read and more correct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 28 Dec, 2015 3 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: - Fix bitrot in __get_user_unaligned() - EVA userspace accessor bug fixes. - Fix for build issues with certain toolchains. - Fix build error for VDSO with particular toolchain versions. - Fix build error due to a variable that should have been removed by an earlier patch * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix bitrot in __get_user_unaligned() MIPS: Fix build error due to unused variables. MIPS: VDSO: Fix build error MIPS: CPS: drop .set mips64r2 directives MIPS: uaccess: Take EVA into account in [__]clear_user MIPS: uaccess: Take EVA into account in __copy_from_user() MIPS: uaccess: Fix strlen_user with EVA
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A smallish set of fixes that we've been sitting on for a while now, flushing the queue here so they go in. Summary: A handful of fixes for OMAP, i.MX, Allwinner and Tegra: - A clock rate and a PHY setup fix for i.MX6Q/DL - A couple of fixes for the reduced serial bus (sunxi-rsb) on Allwinner - UART wakeirq fix for an OMAP4 board, timer config fixes for AM43XX. - Suspend fix for Tegra124 Chromebooks - Fix for missing implicit include that's different between ARM/ARM64" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: Fix suspend hang on Tegra124 Chromebooks bus: sunxi-rsb: Fix peripheral IC mapping runtime address bus: sunxi-rsb: Fix primary PMIC mapping hardware address ARM: dts: Fix UART wakeirq for omap4 duovero parlor ARM: OMAP2+: AM43xx: select ARM TWD timer ARM: OMAP2+: am43xx: enable GENERIC_CLOCKEVENTS_BROADCAST fsl-ifc: add missing include on ARM64 ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl bus: sunxi-rsb: unlock on error in sunxi_rsb_read() ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property
-
- 27 Dec, 2015 5 commits
-
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: "These fix an ACPI processor driver regression introduced during the 4.3 cycle and a mistake in the recently added SCPI support in the arm_big_little cpufreq driver. Specifics: - Fix a thermal management issue introduced by an ACPI processor driver change made during the 4.3 development cycle that failed to return 0 from a function on success which triggered an error cleanup path every time it had been called that deleted useful data structures created previously (Srinivas Pandruvada). - Fix a variable data type issue in the arm_big_little cpufreq driver's SCPI support code added recently that prevents error handling in there from working correctly (Dan Carpenter)" * tag 'pm+acpi-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: scpi-cpufreq: signedness bug in scpi_get_dvfs_info() ACPI / processor: Fix thermal cooling device regression
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md bugfix from Neil Brown: "One more md fix for 4.4-rc Fix a regression which causes reshape to not start properly sometimes" * tag 'md/4.4-rc6-fix' of git://neil.brown.name/md: md: remove check for MD_RECOVERY_NEEDED in action_store.
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI bug fixes from Richard Weinberger: "This contains four bug fixes for UBI" * tag 'upstream-4.4-rc7' of git://git.infradead.org/linux-ubifs: mtd: ubi: don't leak e if schedule_erase() fails mtd: ubi: fixup error correction in do_sync_erase() UBI: fix use of "VID" vs. "EC" in header self-check UBI: fix return error code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace/recordmcount fix from Steven Rostedt: "Russell King was reporting lots of warnings when he compiled his kernel with ftrace enabled. With some investigation it was discovered that it was his compile setup. He was using ccache with hard links, which allowed recordmcount to process the same .o twice. When this happens, recordmcount will detect that it was already done and give a warning about it. Russell fixed this by having recordmcount detect that the object file has more than one hard link, and if it does, it unlinks the object file after it maps it and processes then. This appears to fix the issue. As you did not like the fact that recordmcount modified the file in place and thought that it should do the modifications in memory and then write it out to disk and move it over the old file to prevent other more subtle issues like the one above, a second patch is added on top of Russell's to do just that. Luckily the original code had write and lseek wrappers that I was able to modify to not do inplace writes, but simply keep track of the changes made in memory. When a write is made, a "update" flag is set, and at the end of processing, if the update is set, then it writes the file with changes out to a new file, and then renames it over the original one. The file descriptor is still passed to the write and lseek wrappers because removing that would cause the change to be more intrusive. That can be removed in a follow up cleanup patch that can wait till the next merge window" * tag 'trace-v4.4-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/scripts: Have recordmcount copy the object file scripts: recordmcount: break hardlinks
-
- 26 Dec, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: "Sorry for this late pull request, but these are all important fixes for code introduced/updated in this release which we will otherwise end up back porting. - Unwinder rework (A revert followed by better fix) - Build errors: MMUv2, modules with -Os - highmem section mismatch build splat" * tag 'arc-4.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: dw2 unwind: Catch Dwarf SNAFUs early ARC: dw2 unwind: Don't bail for CIE.version != 1 Revert "ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing" ARC: Fix linking errors with CONFIG_MODULE + CONFIG_CC_OPTIMIZE_FOR_SIZE ARC: mm: fix building for MMU v2 ARC: mm: HIGHMEM: Fix section mismatch splat
-
Rafael J. Wysocki authored
* acpi-processor: ACPI / processor: Fix thermal cooling device regression * pm-cpufreq: cpufreq: scpi-cpufreq: signedness bug in scpi_get_dvfs_info()
-
- 25 Dec, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc system call restart fix from Helge Deller: "The architectural design of parisc always uses two instructions to call kernel syscalls (delayed branch feature). This means that the instruction following the branch (located in the delay slot of the branch instruction) is executed before control passes to the branch destination. Depending on which assembler instruction and how it is used in usersapce in the delay slot, this sometimes made restarted syscalls like futex() and poll() failing with -ENOSYS" * 'parisc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix syscall restarts
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: 1) Finally make perf stack backtraces stable on sparc, several problems (mostly due to the context in which the user copies from the stack are done) contributed to this. From Rob Gardner. 2) Export ADI capability if the cpu supports it. 3) Hook up userfaultfd system call. 4) When faults happen during user copies we really have to clean up and restore the FPU state fully. Also from Rob Gardner * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: tty/serial: Skip 'NULL' char after console break when sysrq enabled sparc64: fix FP corruption in user copy functions sparc64: Perf should save/restore fault info sparc64: Ensure perf can access user stacks sparc64: Don't set %pil in rtrap_nmi too early sparc64: Add ADI capability to cpu capabilities tty: serial: constify sunhv_ops structs sparc: Hook up userfaultfd system call
-
- 24 Dec, 2015 8 commits
-
-
Vijay Kumar authored
When sysrq is triggered from console, serial driver for SUN hypervisor console receives a console break and enables the sysrq. It expects a valid sysrq char following with break. Meanwhile if driver receives 'NULL' ASCII char then it disables sysrq and sysrq handler will never be invoked. This fix skips calling uart sysrq handler when 'NULL' is received while sysrq is enabled. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Acked-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Gardner authored
Short story: Exception handlers used by some copy_to_user() and copy_from_user() functions do not diligently clean up floating point register usage, and this can result in a user process seeing invalid values in floating point registers. This sometimes makes the process fail. Long story: Several cpu-specific (NG4, NG2, U1, U3) memcpy functions use floating point registers and VIS alignaddr/faligndata to accelerate data copying when source and dest addresses don't align well. Linux uses a lazy scheme for saving floating point registers; It is not done upon entering the kernel since it's a very expensive operation. Rather, it is done only when needed. If the kernel ends up not using FP regs during the course of some trap or system call, then it can return to user space without saving or restoring them. The various memcpy functions begin their FP code with VISEntry (or a variation thereof), which saves the FP regs. They conclude their FP code with VISExit (or a variation) which essentially marks the FP regs "clean", ie, they contain no unsaved values. fprs.FPRS_FEF is turned off so that a lazy restore will be triggered when/if the user process accesses floating point regs again. The bug is that the user copy variants of memcpy, copy_from_user() and copy_to_user(), employ an exception handling mechanism to detect faults when accessing user space addresses, and when this handler is invoked, an immediate return from the function is forced, and VISExit is not executed, thus leaving the fprs register in an indeterminate state, but often with fprs.FPRS_FEF set and one or more dirty bits. This results in a return to user space with invalid values in the FP regs, and since fprs.FPRS_FEF is on, no lazy restore occurs. This bug affects copy_to_user() and copy_from_user() for NG4, NG2, U3, and U1. All are fixed by using a new exception handler for those loads and stores that are done during the time between VISEnter and VISExit. n.b. In NG4memcpy, the problematic code can be triggered by a copy size greater than 128 bytes and an unaligned source address. This bug is known to be the cause of random user process memory corruptions while perf is running with the callgraph option (ie, perf record -g). This occurs because perf uses copy_from_user() to read user stacks, and may fault when it follows a stack frame pointer off to an invalid page. Validation checks on the stack address just obscure the underlying problem. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Gardner authored
There have been several reports of random processes being killed with a bus error or segfault during userspace stack walking in perf. One of the root causes of this problem is an asynchronous modification to thread_info fault_address and fault_code, which stems from a perf counter interrupt arriving during kernel processing of a "benign" fault, such as a TSB miss. Since perf_callchain_user() invokes copy_from_user() to read user stacks, a fault is not only possible, but probable. Validity checks on the stack address merely cover up the problem and reduce its frequency. The solution here is to save and restore fault_address and fault_code in perf_callchain_user() so that the benign fault handler is not disturbed by a perf interrupt. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Gardner authored
When an interrupt (such as a perf counter interrupt) is delivered while executing in user space, the trap entry code puts ASI_AIUS in %asi so that copy_from_user() and copy_to_user() will access the correct memory. But if a perf counter interrupt is delivered while the cpu is already executing in kernel space, then the trap entry code will put ASI_P in %asi, and this will prevent copy_from_user() from reading any useful stack data in either of the perf_callchain_user_X functions, and thus no user callgraph data will be collected for this sample period. An additional problem is that a fault is guaranteed to occur, and though it will be silently covered up, it wastes time and could perturb state. In perf_callchain_user(), we ensure that %asi contains ASI_AIUS because we know for a fact that the subsequent calls to copy_from_user() are intended to read the user's stack. [ Use get_fs()/set_fs() -DaveM ] Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Gardner authored
Commit 28a1f533 delays setting %pil to avoid potential hardirq stack overflow in the common rtrap_irq path. Setting %pil also needs to be delayed in the rtrap_nmi path for the same reason. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Khalid Aziz authored
Add ADI (Application Data Integrity) capability to cpu capabilities list. ADI capability allows virtual addresses to be encoded with a tag in bits 63-60. This tag serves as an access control key for the regions of virtual address with ADI enabled and a key set on them. Hypervisor encodes this capability as "adp" in "hwcap-list" property in machine description. Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aya Mahfouz authored
Constifies sunhv_ops structures in tty's serial driver since they are not modified after their initialization. Detected and found using Coccinelle. Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The "domain" variable needs to be signed for the error handling to work. Fixes: 8def3103 (cpufreq: arm_big_little: add SCPI interface driver) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 23 Dec, 2015 7 commits
-
-
Mike Kravetz authored
After hooking up system call, userfaultfd selftest was successful for both 32 and 64 bit version of test. Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This shouldn't be a nightmare before Christmas: just a handful small device-specific fixes for various ASoC and HD-audio drivers. Most of them are stable fixes" * tag 'sound-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2) ASoC: fsl_sai: fix no frame clk in master mode ALSA: hda - Set SKL+ hda controller power at freeze() and thaw() ASoC: sgtl5000: fix VAG power up timing ASoC: rockchip: spdif: Set transmit data level to 16 samples ASoC: wm8974: set cache type for regmap ASoC: es8328: Fix shifts for mixer switches ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_tx ASoC: es8328: Fix deemphasis values
-
git://anongit.freedesktop.org/drm-intelLinus Torvalds authored
Pull i915 drm fixes from Jani Nikula: "Here's a batch of i915 fixes all around. It may be slightly bigger than one would hope for at this stage, but they've all been through testing in our -next before being picked up for v4.4. Also, I missed Dave's fixes pull earlier today just because I wanted an extra testing round on this. So I'm fairly confident. Wishing you all the things it is customary to wish this time of the year" * tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel: drm/i915: Correct max delay for HDMI hotplug live status checking drm/i915: mdelay(10) considered harmful drm/i915: Kill intel_crtc->cursor_bo drm/i915: Workaround CHV pipe C cursor fail drm/i915: Only spin whilst waiting on the current request drm/i915: Limit the busy wait on requests to 5us not 10ms! drm/i915: Break busywaiting for requests on pending signals drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2) drm/i915: Set the map-and-fenceable flag for preallocated objects drm/i915: Drop the broken cursor base==0 special casing
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Not much happening, should have dequeued this lot earlier. One amdgpu, one nouveau and one exynos fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/exynos: atomic check only enabled crtc states drm/nouveau/bios/fan: hardcode the fan mode to linear drm/amdgpu: fix user fence handling
-
Takashi Iwai authored
Merge tag 'asoc-fix-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.4 A collection of small driver specific fixes here, nothing that'll affect users who don't have the devices concerned. At least the wm8974 bug indicates that there's not too many users of some of these devices.
-
Mark Brown authored
Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', 'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "Three small fixes for 4.4 final. Specifically: - The segment issue fix from Junichi, where the old IO path does a bio limit split before potentially bouncing the pages. We need to do that in the right order, to ensure that limitations are met. - A NVMe surprise removal IO hang fix from Keith. - A use-after-free in null_blk, introduced by a previous patch in this series. From Mike Krinkin" * 'for-linus' of git://git.kernel.dk/linux-block: null_blk: fix use-after-free error block: ensure to split after potentially bouncing a bio NVMe: IO ending fixes on surprise removal
-
- 22 Dec, 2015 6 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fix from Bruce Fields: "Just one fix for a NFSv4 callback bug introduced in 4.4" * tag 'nfsd-4.4-1' of git://linux-nfs.org/~bfields/linux: nfsd: don't hold ls_mutex across a layout recall
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: - A series of fixes to the MTRR emulation, tested in the BZ by several users so they should be safe this late - A fix for a division by zero - Two very simple ARM and PPC fixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Reload pit counters for all channels when restoring state KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID KVM: MTRR: observe maxphyaddr from guest CPUID, not host KVM: MTRR: fix fixed MTRR segment look up KVM: VMX: Fix host initiated access to guest MSR_TSC_AUX KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check kvm: x86: move tracepoints outside extended quiescent state KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Two late bug fixes for kernel 4.4. Merry Christmas" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dis: Fix handling of format specifiers s390/zcrypt: Fix AP queue handling if queue is full
-
Jon Hunter authored
Enabling CPUFreq support for Tegra124 Chromebooks is causing the Tegra124 to hang when resuming from suspend. When CPUFreq is enabled, the CPU clock is changed from the PLLX clock to the DFLL clock during kernel boot. When resuming from suspend the CPU clock is temporarily changed back to the PLLX clock before switching back to the DFLL. If the DFLL is operating at a much lower frequency than the PLLX when we enter suspend, and so the CPU voltage rail is at a voltage too low for the CPUs to operate at the PLLX frequency, then the device will hang. Please note that the PLLX is used in the resume sequence to switch the CPU clock from the very slow 32K clock to a faster clock during early resume to speed up the resume sequence before the DFLL is resumed. Ideally, we should fix this by setting the suspend frequency so that it matches the PLLX frequency, however, that would be a bigger change. For now simply disable CPUFreq support for Tegra124 Chromebooks to avoid the hang when resuming from suspend. Fixes: 9a0baee9 ("ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fix from Michael Tsirkin: "This includes a single fix for virtio ccw error handling" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: handle error values in irb
-
Mickaël Salaün authored
Fix a pointer cast typo introduced in v4.4-rc5 especially visible for the i386 subarchitecture where it results in a kernel crash. [ Also removed pointless cast as per Al Viro - Linus ] Fixes: 8090bfd2 ("um: Fix fpstate handling") Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-