- 14 May, 2012 6 commits
-
-
Sakari Ailus authored
The purpose of the link_validate() op is to allow an entity driver to ensure that the properties of the pads at the both ends of the link are suitable for starting the pipeline. link_validate is called on sink pads on active links which belong to the active part of the graph. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
Add three other colour orders for 10-bit to 8-bit DPCM compressed raw bayer pixel formats. Signed-off-by:
-
Sakari Ailus authored
Document guidelines how 4CC codes should be named. Only raw bayer is included currently. Other formats should be documented later on. Signed-off-by:
-
Sakari Ailus authored
Add control class for image processing controls. The control class deals with controls processing image, for example digital gain or noise filtering, which can be present in any part of the pipeline. Signed-off-by:
-
Sakari Ailus authored
Add image source control class. This control class is intended to contain low level controls which deal with control of the image capture process --- the A/D converter in image sensors, for example. Signed-off-by:
-
Sakari Ailus authored
V4L2 uses the enum type in IOCTL arguments in IOCTLs that were defined until the use of enum was considered less than ideal. Recently Rémi Denis-Courmont brought up the issue by proposing a patch to convert the enums to unsigned: <URL:http://www.spinics.net/lists/linux-media/msg46167.html> This sparked a long discussion where another solution to the issue was proposed: two sets of IOCTL structures, one with __u32 and the other with enums, and conversion code between the two: <URL:http://www.spinics.net/lists/linux-media/msg47168.html> Both approaches implement a complete solution that resolves the problem. The first one is simple but requires assuming enums and __u32 are the same in size (so we won't break the ABI) while the second one is more complex and less clean but does not require making that assumption. The issue boils down to whether enums are fundamentally different from __u32 or not, and can the former be substituted by the latter. During the discussion it was concluded that the __u32 has the same size as enums on all archs Linux is supported: it has not been shown that replacing those enums in IOCTL arguments would break neither source or binary compatibility. If no such reason is found, just replacing the enums with __u32s is the way to go. This is what this patch does. This patch is slightly different from Remi's first RFC (link above): it uses __u32 instead of unsigned and also changes the arguments of VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY. Signed-off-by:
Rémi Denis-Courmont <remi@remlab.net> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
- 08 May, 2012 26 commits
-
-
H Hartley Sweeten authored
The function vb2_dma_contig_vaddr returns a void * not an integer. Quiets the sparse noise: warning: Using plain integer as NULL pointer Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
H Hartley Sweeten authored
Include the header to pickup the definitions of the exported symbols. Quiets the following sparse warnings: warning: symbol 'vb2_dma_contig_memops' was not declared. Should it be static? warning: symbol 'vb2_dma_contig_init_ctx' was not declared. Should it be static? warning: symbol 'vb2_dma_contig_cleanup_ctx' was not declared. Should it be static? Signed-off-by:
-
Andy Shevchenko authored
There is no needs to keep .remove under .exit.text. This driver is for a standalone chip that could be on any board and connected to any i2c bus. At the same time we don't need to keep the as3645a_probe() after initializing the device. Therefore we mark it and relevant functions with __devinit tag. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The mf_low value must be a multiple of mf_inc. Round it up to the nearest mf_inc multiple after computing it. Signed-off-by:
-
Laurent Pinchart authored
Support for the legacy crop API is emulated in the subdev core. Signed-off-by:
-
Laurent Pinchart authored
Support for the legacy crop API is emulated in the subdev core. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Configure CFA interpolation automatically based on the input format. Signed-off-by:
-
Laurent Pinchart authored
For consistency reasons, rename the last remaining occurences of rgb_to_ycbcr to csc (color space conversion). Signed-off-by:
-
Laurent Pinchart authored
When applications modify preview engine parameters, the new values are applied to the hardware by the preview engine interrupt handler during vertical blanking. If the parameters are being changed when the interrupt handler is called, it just delays applying the parameters until the next frame. If an application modifies the parameters for every frame, and the preview engine interrupt is triggerred synchronously, the parameters are never applied to the hardware. Fix this by storing new parameters in a shadow copy, and switch the active parameters with the shadow values atomically. Signed-off-by:
-
Laurent Pinchart authored
Instead of using a large switch/case statement to return offsets to and sizes of individual preview engine parameters in the parameters and configuration structures, store the information in the update_attrs table and use it at runtime. Signed-off-by:
-
Laurent Pinchart authored
Rename the blk_adj and rgb2ycbcr fields to blkadj and csc respectively. Signed-off-by:
-
Laurent Pinchart authored
The feature_bit is always equal to 1 << array position, remove it and compute the value dynamically. Signed-off-by:
-
Laurent Pinchart authored
The preview engine parameters are referenced by a value suitable for being used in a bitmask. Two macros named OMAP3ISP_PREV_* and PREV_* are declared for each parameter and are used interchangeably. Remove the private macro. Replace the configuration bit field in the parameter update attributes structure with a boolean that indicates whether the parameter can be updated through the preview engine configuration ioctl. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
The flag isn't used, remove it. Signed-off-by:
-
Laurent Pinchart authored
If no parameter needs to be modified, make preview_config() and preview_setup_hw() return immediately. This speeds up interrupt handling in the common case. Signed-off-by:
-
Laurent Pinchart authored
Brightness and contrast are handled through V4L2 controls. Their configuration bit in the preview engine update attributes table is set to -1 to reflect that. However, the VIDIOC_OMAP3ISP_PRV_CFG ioctl handler doesn't handle -1 correctly as a configuration bit value, and erroneously considers that the parameter has been selected for update by the ioctl caller. Fix this. Signed-off-by:
-
Sakari Ailus authored
Handle errors from omap3isp_csi2_reset() in omap3isp_csiphy_acquire(). Signed-off-by:
-
Laurent Pinchart authored
When propagating the frame number through the pipeline, the frame number must be incremented at frame start by the appropriate IRQ handler. This was properly handled for the CSI2 and CCP2 receivers, but not when the CCDC parallel interface is used. ADD frame number incrementation to the HS/VS interrupt handler. As the HS/VS interrupt is also generated for frames received by the CSI2 and CCP2 receivers, remove explicit propagation handling from the serial receivers. Reported-by:
Kruno Mrak <kruno.mrak@matrix-vision.de> Signed-off-by:
-
Sakari Ailus authored
iommu_domain_free() was called in isp_remove() before omap3isp_put(). omap3isp_put() must not save the context if the IOMMU no longer is there. Fix this. Signed-off-by:
-
Laurent Pinchart authored
The OMAP3 ISP preview engine will violate the L4 bus protocol if we try to write some of its internal registers after it failed to stop properly. This generates an external abort on non-linefetch fault, triggering a fatal kernel oops. We can't always prevent preview engine stop failures (they can for instance be caused by a sensor crash), but we can improve the system reliability by refusing to start streaming on a pipeline that contains the preview engine if it failed to stop. The driver will then eventually reset the ISP (when all applications will have closed their file handles related to OMAP3 ISP device nodes), making the ISP usable again. Fixes: NB#291334 - camera: Recover gracefully from ISP crash instead of oopsing Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Reviewed-by:
Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by:
-
Laurent Pinchart authored
The get_unmapped_area() operation was forgotten during conversion to videobuf2. Fix it. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Properly validate the user-supplied index against the number of inputs. The code used the pin local variable instead of the index by mistake. Reported-by:
Jozef Vesely <vesely@gjh.sk> Signed-off-by:
-
- 07 May, 2012 8 commits
-
-
Mike Isely authored
The V4L querystd implementation appears to want to narrow down the list of available standards by starting with a hardware-supported list and then attempting to detect which among those are actually available. Prior to this change in the pvrusb2 driver we started with all possible standards. With this change in place we instead narrow to just the standards that we know the hardware can actually support. For example, this removes the ATSC standards from the list if we aren't dealing with a hybrid device... Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Get rid of pvrusb2-local implementation for enumeration of video standards - with video_ioctl2 this happens automatically now in the v4l core. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
With the transition to ioctl2, the pvrusb2 driver's own standards enumeration is no longer used. Instead a generic algorithm internal to v4l is used (which is a great idea - since the pvrusb2 implementation itself was generic anyway). This change ensures that the v4l algorithm works with the correct set of hardware supported standards. This resolves a FIXME left behind from the videodev_ioctl2 transition. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Other aspects of the pvrusb2 driver - including in particular those dealing with video standards - all use internal control IDs for uniform access by the interfaces. By exporting the querystd result as another control ID, uniform access to it becomes available through the sysfs interface. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Move full implementation of pvr2_hdw_get_detected_std() actually include pvr2_hdw_get_detected_std(). Signed-off-by:
-
