Remember what function to call while planning the commands instead
of figuring it our later on.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It doesn't make much sense to create bigger commands first which we then need
to split into smaller one again. Just make sure the commands we create aren't
to big in the first place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We don't need the gart mapping handling here any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not needed any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Write the PTEs at the end of the IB instead of directly into the SDMA commands.
This can save quite some CPU cycles building the entries.

This doesn't change the DW estimation because PTEs where embedded into the IB
before as well. It just moves them to the end of the IB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Indicate if need to sync between bo and shadow, where sync to where.
V2:
Rename to backup_shadow
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The pd/pt shadow bo will be used to backup page table, when gpu reset
happens, we can restore the page table by them.
V2:
Free shadow bo.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

shadow bo is the shadow of a bo, which is always in GTT,
which can be used to backup the original bo.
V2:
reference shadow parent, shadow bo will be freed by who allocted him.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These flags allow userspace to explicitly specify the target vertical
blank period when a flip should take effect.

v2:
* Add new struct drm_mode_crtc_page_flip_target instead of modifying
  struct drm_mode_crtc_page_flip, to make sure all existing userspace
  code keeps compiling (Daniel Vetter)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With the previous change, it's safe to let page flips take effect
anytime during a vertical blank period.

This can avoid delaying a flip by a frame in some cases where we get to
radeon_flip_work_func -> adev->mode_info.funcs->page_flip during a
vertical blank period.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
radeon_flip_work_func considerably.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With the previous change, it's safe to let page flips take effect
anytime during a vertical blank period.

This can avoid delaying a flip by a frame in some cases where we get to
amdgpu_flip_work_func -> adev->mode_info.funcs->page_flip during a
vertical blank period.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
amdgpu_flip_work_func considerably.

agd: update dce_virtual.c as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Mostly the same as the existing page_flip hook, but takes an additional
parameter specifying the target vertical blank period when the flip
should take effect.

v2:
* Add curly braces around else statement corresponding to an if block
  with curly braces (Alex Deucher)
* Call drm_crtc_vblank_put in the error case (Daniel Vetter)
* Clarify entry point documentation comment (Daniel Vetter)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The core will do this for us now.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The core will do this for us now.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We align to 64KB, but when userspace aligns even more we can easily use more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can add the fragment params before we split the update for the page tables.
That should save a few CPU cycles for larger updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No need to carry that forward as a separate parameter.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Well those are actually page table entry parameters.
This also makes the variable names used a bit shorter.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can actually do way more than just the 64KB we currently used as default.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not used for a long time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces a new macro WREG32_FIELD which is used
to write to a register with a new value in a field.  It's designed
to replace the pattern:

tmp = RREG32(mmFoo);
tmp &= ~REG__FIELD_MASK;
tmp |= new_value << REG__FIELD__SHIFT;
WREG32(mmFoo, tmp)

with:

WREG32_FIELD(Foo, FIELD, new_value);

Unlike WREG32_P() it understands offsets/masks and doesn't
require the caller to shift the value (or mask properly).

It's applied where suitable in the gfx_v8_0.c driver to start
with.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix various whitespace issues in gfx v8 driver.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For virtual display feature, as there may be multiple GPUs,
for user could choose whiche GPU need to enable this feature, change
the type of virtual_display from int to char*. The variable will be set
like this virtual_display="xxxx:xx:xx.x;xxxx:xx:xx.x;".
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This asic has no DCE block.  Also clarify the error message
for unmatched chips.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Put it in one place.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For virtual display feature, if user set the option "amdgpu.virtual_display=1"
when load amdgpu.ko. Then need to set the ip_blocks with virtual display ip
blocks. And when enable virtual display, the amdgpu_dal need to be set to zero.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For virtual display feature, define on variable in amdgpu.ko. When want to
enable virtual display feature, need set the option "amdgpu.virtual_display=1".
And then disable vga render and crtc if have DCE engine.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For virtual display feature, define virtual display ip blocks, and set
dce_virtual_ip_funcs to DCE block.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For virtual display feature, add one connector type in amdgpu_connector_add.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>