1. 10 Feb, 2019 8 commits
  2. 09 Feb, 2019 32 commits
    • Russell King's avatar
      net: marvell: mvpp2: clear flow control modes in 10G mode · e240b7db
      Russell King authored
      When mvpp2 configures the flow control modes in mvpp2_xlg_config() for
      10G mode, it only ever set the flow control enable bits.  There is no
      mechanism to clear these bits, which means that userspace is unable to
      use standard APIs to disable flow control (the only way is to poke the
      register directly.)
      
      Fix the missing bit clearance to allow flow control to be disabled.
      This means that, by default, as there is no negotiation in 10G modes
      with mvpp2, flow control is now disabled rather than being rx-only.
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e240b7db
    • Andrew Lunn's avatar
      net: phy: Add support for asking the PHY its abilities · efbdfdc2
      Andrew Lunn authored
      Add support for runtime determination of what the PHY supports, by
      adding a new function to the phy driver. The get_features call should
      set the phydev->supported member with the features the PHY supports.
      It is only called if phydrv->features is NULL.
      
      This requires minor changes to pause. The PHY driver should not set
      pause abilities, except for when it has odd cause capabilities, e.g.
      pause cannot be disabled. With this change, phydev->supported already
      contains the drivers abilities, including pause. So rather than
      considering phydrv->features, look at the phydev->supported, and
      enable pause if neither of the pause bits are already set.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      [hkallweit1@gmail.com: fixed small checkpatch complaint in one comment]
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      efbdfdc2
    • Andrew Lunn's avatar
      net: phy: probe the PHY before determining the supported features · 92ed2eb7
      Andrew Lunn authored
      We will soon support asking the PHY at runtime to determine what
      features it supports, rather than forcing it to be compile time.
      But we should probe the PHY first. So probe the phy driver earlier.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      92ed2eb7
    • Heiner Kallweit's avatar
      net: phy: remove unneeded masking of PHY register read results · 50684da7
      Heiner Kallweit authored
      PHY registers are only 16 bits wide, therefore, if the read was
      successful, there's no need to mask out the higher 16 bits.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50684da7
    • Vakul Garg's avatar
      net/tls: Disable async decrytion for tls1.3 · 8497ded2
      Vakul Garg authored
      Function tls_sw_recvmsg() dequeues multiple records from stream parser
      and decrypts them. In case the decryption is done by async accelerator,
      the records may get submitted for decryption while the previous ones may
      not have been decryted yet. For tls1.3, the record type is known only
      after decryption. Therefore, for tls1.3, tls_sw_recvmsg() may submit
      records for decryption even if it gets 'handshake' records after 'data'
      records. These intermediate 'handshake' records may do a key updation.
      By the time new keys are given to ktls by userspace, it is possible that
      ktls has already submitted some records i(which are encrypted with new
      keys) for decryption using old keys. This would lead to decrypt failure.
      Therefore, async decryption of records should be disabled for tls1.3.
      
      Fixes: 130b392c ("net: tls: Add tls 1.3 support")
      Signed-off-by: default avatarVakul Garg <vakul.garg@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8497ded2
    • Heiner Kallweit's avatar
      net: phy: disregard "Clause 22 registers present" bit in get_phy_c45_devs_in_pkg · 3b5e74e0
      Heiner Kallweit authored
      Bit 0 in register 1.5 doesn't represent a device but is a flag that
      Clause 22 registers are present. Therefore disregard this bit when
      populating the device list. If code needs this information it
      should read register 1.5 directly instead of accessing the device
      list.
      Because this bit doesn't represent a device don't define a
      MDIO_MMD_XYZ constant, just define a MDIO_DEVS_XYZ constant for
      the flag in the device list bitmap.
      
      v2:
      - make masking of bit 0 more explicit
      - improve commit message
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b5e74e0
    • David S. Miller's avatar
      Merge branch 'mvpp2-phylink-fixes' · 0abc676e
      David S. Miller authored
      Russell King says:
      
      ====================
      mvpp2 phylink fixes
      
      Having spent a while debugging issues with Sven Auhagen, it appears
      that the mvpp2 network driver's phylink support isn't quite correct.
      
      This series fixes that up, but, despite being tested locally, by
      Sven, and by Antoine, I would prefer it to be applied to net-next
      so that there is time for more people to test before it hits -rc or
      stable backports.
      
      The symptoms were that although PHYs would come up, the GMAC never
      reported that the link was up, or in some cases it did report link
      up but packets would not flow.  Various approaches were tried to
      work around that, such as switching to in-band negotiation from
      PHY mode, but ultimately the problem was in the way mvpp2 was being
      programmed.
      
      This series addresses that by, essentially, making mvpp2 follow the
      same implementation pattern as mvneta: we configure the GMAC in three
      stages:
      
      1) the PHY interface mode
      2) the negotiation advert
      3) the negotiation style
      
      Another issue is that mvpp2 was always taking the link down each time
      its mac_config method was called: this is disruptive when the link is
      already up, and we're just updating settings such as flow control.
      There are some circumstances where we make the call despite there
      being no changes (eg, when phylink is polling a GPIO or using a custom
      link state function.)
      
      This series depends on two previous patches already sent for net-next:
        net: marvell: mvpp2: fix lack of link interrupts
        net: marvell: mvpp2: use phy_interface_mode_is_8023z() helper
      
      There is one last patch which deals with link status interrupts, which
      I'll send separately because I think there's other considerations, but
      that should not hold up this series of patches.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0abc676e
    • Russell King's avatar
      net: marvell: mvpp2: fix AN restart · a4650477
      Russell King authored
      phylink already limits which interface modes are able to call the
      MACs AN restart function, but in any case, the commentry seems
      incorrect: the AN restart bit does not automatically clear when
      set.  This has been found via manual setting using devmem2, and
      we can observe that the AN does indeed restart and complete, yet
      the AN restart bit remains set.  Explicitly clear the AN restart
      bit.
      Tested-by: default avatarSven Auhagen <sven.auhagen@voleatech.de>
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a4650477
    • Russell King's avatar
      net: marvell: mvpp2: read correct pause bits · 417f3d08
      Russell King authored
      When reading the pause bits in mac_link_state, mvpp2 was reporting
      the state of the "active pause" bits, which are set when the MAC is
      in pause mode.  This is not what phylink wants - we want the
      negotiated pause state.  Fix the definition so we read the correct
      bits.
      Tested-by: default avatarSven Auhagen <sven.auhagen@voleatech.de>
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      417f3d08
    • Russell King's avatar
      net: marvell: mvpp2: only reprogram what is necessary on mac_config · d14e078f
      Russell King authored
      mac_config() can be called at any point, and the expected behaviour
      from MAC drivers is to only reprogram when necessary - and certainly
      avoid taking the link down on every call.
      
      Unfortunately, mvpp2 does exactly that - it takes the link down, and
      reprograms everything, and then releases the forced-link down.
      
      This is bad, it can cause the link to bounce:
      
      - SFP detects signal, disables LOS indication.
      - SFP code calls into phylink, calling phylink_sfp_link_up() which
        triggers a resolve.
      - phylink_resolve() calls phylink_get_mac_state() and finds the MAC
        reporting link up.
      - phylink wants to configure the pause mode on the MAC, so calls
        phylink_mac_config()
      - mvpp2 takes the link down temporarily, generating a MAC link down
        event followed by another MAC link event.
      - phylink calls mac_link_up() and then processes the MAC link down
        event.
      - phylink_resolve() gets called again, registers the link down, and
        calls mach_link_down() before re-running itself.
      - phylink_resolve() starts again at step 3 above.  This sequence
        repeats.
      
      GMAC versions prior to mvpp2 do not require the link to be taken down
      except when certain link properties (eg, switching between SGMII and
      1000base-X mode, or enabling/disabling in-band negotiation) are
      changed.  Implement this for mvpp2.
      Tested-by: default avatarSven Auhagen <sven.auhagen@voleatech.de>
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d14e078f
    • Russell King's avatar
      net: marvell: mvpp2: fix stuck in-band SGMII negotiation · 316734fd
      Russell King authored
      It appears that the mvpp22 can get stuck with SGMII negotiation.  The
      symptoms are that in-band negotiation never completes and the partner
      (eg, PHY) never reports SGMII link up, or if it supports negotiation
      bypass, goes into negotiation bypass mode (which will happen when the
      PHY sees that the MAC is alive but gets no response.)
      
      Triggering the PHY end of the link to re-negotiate results in the
      bypass bit clearing on the PHY, and then re-setting - indicating that
      the problem is at the mvpp22 GMAC end.
      
      Asserting the GMAC reset and de-asserting it resolves the issue.
      Arrange to assert the GMAC reset at probe time, and deassert it only
      after we have configured the GMAC for the appropriate mode.  This
      resolves the issue.
      Tested-by: default avatarSven Auhagen <sven.auhagen@voleatech.de>
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      316734fd
    • Russell King's avatar
      net: marvell: mvpp2: phylink compliance updates · 388ca27f
      Russell King authored
      Sven Auhagen reported issues with negotiation on a couple of his
      platforms using a mixture of SFP and PHYs in various different
      modes.  Debugging to root cause proved difficult, but essentially
      the problem comes down to the mvpp2 phylink implementation being
      slightly at odds with what is expected.
      
      phylink operates in three modes: phy, fixed-link, and in-band mode.
      
      In the first two modes, the expected behaviour from a MAC driver is
      that phylink resolves the operating mode and passes the mode to the
      MAC driver for it to program, including when the link should be
      brought up or taken down.  This is basically the same as the libphy
      approach.  This does not negate the requirement to advertise a correct
      control word for interface modes that have control words where that
      can be reasonably controlled.
      
      The second mode is in-band mode, where the MAC is expected to use the
      in-band control word to determine the operating mode.
      
      The mvneta driver implements the correct pattern required to support
      this: configure the port interface type separately from the in-band
      mode(s).  This is now specified in the phylink documentation patches.
      
      mvpp2 was programming in-band mode for SGMII and the 802.3z modes no
      what, and avoided forcing the link up in fixed/phy modes.  This caused
      a problem with some boards where the PHY is by default programmed to
      enter AN bypass mode, the PHY would report that the link was up, but
      the mvpp2 never completed the exchange of control word.
      
      Another issue that mvpp2 has is it sets SGMII AN format control word
      for both SGMII and 802.3z modes. The format of the control word is
      defined by MVPP2_GMAC_INBAND_AN_MASK, which should be set for SGMII
      and clear for 802.3z. Available Marvell documentation for earlier
      GMAC implementations does not make this clear, but this has been
      ascertained via extensive testing on earlier GMAC implementations,
      and then confirmed with a Macchiatobin Single Shot connected to a
      Clearfog: when MVPP2_GMAC_INBAND_AN_MASK is set, the clearfog does
      not receive the advertised pause mode settings.
      
      Lastly, there is no flow control in the in-band control word in Cisco
      SGMII, setting the flow control autonegotiation bit even with a PHY
      that has the Marvell extension to send this information does not result
      in the flow control being enabled at the MAC.  We need to do this
      manually using the information provided via phylink.
      
      Re-code mvpp2's mac_config() and mac_link_up() to follow this pattern.
      This allows Sven Auhagen's board and Macchiatobin to reliably bring
      the link up with the 88e1512 PHY with phylink operating in PHY mode
      with COMPHY built as a module but the rest of the networking built-in,
      and u-boot having brought up the interface.  in-band mode requires an
      additional patch to resolve another problem.
      Tested-by: default avatarSven Auhagen <sven.auhagen@voleatech.de>
      Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      388ca27f
    • Nathan Chancellor's avatar
      ethtool: Remove unnecessary null check in ethtool_rx_flow_rule_create · 8b34ec65
      Nathan Chancellor authored
      net/core/ethtool.c:3023:19: warning: address of array
      'ext_m_spec->h_dest' will always evaluate to 'true'
      [-Wpointer-bool-conversion]
                      if (ext_m_spec->h_dest) {
                      ~~  ~~~~~~~~~~~~^~~~~~
      
      h_dest is an array, it can't be null so remove this check.
      
      Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
      Link: https://github.com/ClangBuiltLinux/linux/issues/353Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Acked-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8b34ec65
    • Gustavo A. R. Silva's avatar
      ixgbe: Use struct_size() helper · 439bb9ed
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = kzalloc(size, GFP_KERNEL);
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
      
      Notice that, in this case, variable size is not necessary, hence
      it is removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      439bb9ed
    • Gustavo A. R. Silva's avatar
      igc: Use struct_size() helper · 196d7311
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = kzalloc(size, GFP_KERNEL)
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)
      
      Notice that, in this case, variable size is not necessary, hence
      it is removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      196d7311
    • Gustavo A. R. Silva's avatar
      igb: use struct_size() helper · a0feac18
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = alloc(size, GFP_KERNEL);
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      size = struct_size(instance, entry, count);
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0feac18
    • Heiner Kallweit's avatar
      net: phy: don't double-read link status register if link is up · c397ab21
      Heiner Kallweit authored
      The link status register latches link-down events. Therefore, if link
      is reported as being up, there's no need for a second read.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c397ab21
    • Gustavo A. R. Silva's avatar
      fm10k: use struct_size() in kzalloc() · 9a00536c
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = kzalloc(size, GFP_KERNEL);
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
      
      Notice that, in this case, variable size is not necessary, hence
      it is removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9a00536c
    • Gustavo A. R. Silva's avatar
      nfp: flower: cmsg: use struct_size() helper · af6f12f2
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          void *entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(void *);
      instance = alloc(size, GFP_KERNEL);
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = alloc(struct_size(instance, entry, count), GFP_KERNEL);
      
      Notice that, in this case, variable size is not necessary, hence
      it is removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af6f12f2
    • Gustavo A. R. Silva's avatar
      mlxsw: spectrum_router: Use struct_size() in kzalloc() · 9e475293
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = kzalloc(size, GFP_KERNEL)
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)
      
      Notice that, in this case, variable alloc_size is not necessary, hence
      it is removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e475293
    • Gustavo A. R. Silva's avatar
      bnx2x: Use struct_size() in kzalloc() · 370600af
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = kzalloc(size, GFP_KERNEL)
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)
      
      Notice that, in this case, variable fsz is not necessary, hence
      it is removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      370600af
    • Gustavo A. R. Silva's avatar
      wimax/i2400m: use struct_size() helper · 13644be2
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          void *entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(void *);
      instance = alloc(size, GFP_KERNEL);
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      size = struct_size(instance, entry, count);
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      13644be2
    • Gustavo A. R. Silva's avatar
      wan: wanxl: use struct_size() in kzalloc() · a3deec5b
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = alloc(size, GFP_KERNEL)
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = alloc(struct_size(instance, entry, count), GFP_KERNEL)
      
      Notice that, in this case, variable alloc_size is not necessary, hence
      it is removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a3deec5b
    • Gustavo A. R. Silva's avatar
      net: usb: cdc-phonet: use struct_size() in alloc_netdev() · fd6d1226
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          void *entry[];
      };
      
      instance = alloc(sizeof(struct foo) + count * sizeof(void *));
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = alloc(struct_size(instance, entry, count));
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fd6d1226
    • Gustavo A. R. Silva's avatar
      net: dsa: use struct_size() in devm_kzalloc() · 33b363e0
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = alloc(size, GFP_KERNEL)
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = alloc(struct_size(instance, entry, count), GFP_KERNEL)
      
      Notice that, in this case, variable size is not necessary, hence it is
      removed.
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Reviewed-by: default avatarVivien Didelot <vivien.didelot@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      33b363e0
    • Gustavo A. R. Silva's avatar
      mpls_iptunnel: use struct_size() helper · b4ba9354
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      instance = alloc(sizeof(struct foo) + count * sizeof(struct boo));
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      instance = alloc(struct_size(instance, entry, count));
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b4ba9354
    • Gustavo A. R. Silva's avatar
      net/sched: use struct_size() helper · 8fe5756c
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = alloc(size, GFP_KERNEL)
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      size = struct_size(instance, entry, count);
      instance = alloc(size, GFP_KERNEL)
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8fe5756c
    • Gustavo A. R. Silva's avatar
      bridge: use struct_size() helper · 4154b567
      Gustavo A. R. Silva authored
      One of the more common cases of allocation size calculations is finding
      the size of a structure that has a zero-sized array at the end, along
      with memory for some number of elements for that array. For example:
      
      struct foo {
          int stuff;
          struct boo entry[];
      };
      
      size = sizeof(struct foo) + count * sizeof(struct boo);
      instance = alloc(size, GFP_KERNEL)
      
      Instead of leaving these open-coded and prone to type mistakes, we can
      now use the new struct_size() helper:
      
      size = struct_size(instance, entry, count);
      
      This code was detected with the help of Coccinelle.
      Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4154b567
    • David S. Miller's avatar
      Merge branch 'qed-SmartAN-query-support' · 6f0282bf
      David S. Miller authored
      Sudarsana Reddy Kalluru says:
      
      ====================
      qed*: SmartAN query support
      
      SmartAN feature detects the peer/cable capabilities and establishes the
      link in the best possible configuration.
      The patch series adds support for querying the capability. Please consider
      applying it net-next.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6f0282bf
    • Sudarsana Reddy Kalluru's avatar
      qede: Add ethtool interface for SmartAN query. · f15cff04
      Sudarsana Reddy Kalluru authored
      The patch adds driver support to query SmartAN capability via ethtool.
      Signed-off-by: default avatarSudarsana Reddy Kalluru <skalluru@marvell.com>
      Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
      Signed-off-by: default avatarMichal Kalderon <mkalderon@marvell.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f15cff04
    • Sudarsana Reddy Kalluru's avatar
      qed: Add API for SmartAN query. · df9c716d
      Sudarsana Reddy Kalluru authored
      The patch adds driver interface to read the SmartAN capability from
      management firmware.
      Signed-off-by: default avatarSudarsana Reddy Kalluru <skalluru@marvell.com>
      Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
      Signed-off-by: default avatarMichal Kalderon <mkalderon@marvell.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df9c716d
    • David S. Miller's avatar
      Merge branch 'net-dsa-bcm_sf2-Add-support-for-CFP-statistics' · bc794e6e
      David S. Miller authored
      Florian Fainelli says:
      
      ====================
      net: dsa: bcm_sf2: Add support for CFP statistics
      
      The Broadcom SF2 switch has a Compact Field Processor (CFP) which not
      only can perform matching + action, but also counts the number of times
      a rule has been hit. This is invaluable while debugging when/if rules
      are not matched.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bc794e6e