Alexander Aring says:

====================
6lowpan: introduce 6lowpan-nd

David can you please pick-up this patch-serie for your net-next tree?
Thanks in advance.

This patch series introduces the ndisc ops callback structure to add different
handling for IPv6 neighbour discovery cache functionality. It implements at first
the two following use-cases:

 - 6CO handling as userspace option (For all 6LoWPAN layers, BTLE/802.15.4) [0]
 - short address handling for 802.15.4 6LoWPAN only [1]

Since my last patch series, I completely changed the whole ndisc_ops callback
structure to not replace the whole ndisc functionality at recv/send level of
NS/NA/RS/RA which I send in my previous patch-series "6lowpan: introduce basic
6lowpan-nd". I changed it now to add different handling in a very low-level way
of ndisc functionality.

The ndisc_ops don't must be registered to dev->ndisc_ops anymore, if they are not
set, then no additional ipv6 ndisc handling will be done.

This patch series now introduce a complete handling of short address for
802.15.4 6LoWPAN in case of send/recv of NA/NS/RS and RA. In case of RA
(receive only) and PIO we also need a second prefix + short-address based
address.

This callback structure can be used later (I hope) for RFC 6775 [0]. This RFC
defines some new option fields and messages for 6LoWPAN-ND. This patch series
does not implement RFC 6775 (except we decide now to handle 6CO in userspace).

Additional we can use the current ops for parse/fill ndisc options for kernel
handled ndisc messages to add 6CIO, see [2].

I tested RA/NS/NA/RS messages with short address which seems to work, what I
didn't test is the redirect messages since I don't know how to generate them.
The short address for redirect messages are also some special case here, because
the short address by a L3 target address lookuped by neighbour cache need to be
added.

btw:
According to [3] sending redirect messages should be also disabled by default
on 6lowpan interfaces, but can be activated afterwards. This is maybe
something for the ipv6_devconf structure. There is a "accept_redirects" but
no "disable_redirects".

- Alex

[0] https://tools.ietf.org/html/rfc6775
[1] https://tools.ietf.org/html/rfc4944#section-8
[2] https://tools.ietf.org/html/rfc7400

changes since v3:
 - add acked-by and reviewed-by tags
 - fix url references in cover-letter
 - add cover-letter that this patch series is okay to go through net-next tree

changes since RFC:
 - add lowlevel functions __ndisc_opt_addr_space,
   __ndisc_opt_addr_data and __ndisc_fill_addr_option for corresponding
   functions which doesn't requires net_device argument.
 - move ndisc_ops e.g. ndisc_ops_fill_addr_option function call into the
   corresponding device argument function ndisc_fill_addr_option.
   (Introduced a special static inline function for redirect handling).
 - fix error handling in addrconf_prefix_rcv_add_addr.
   (Please see, introduce new API handling that second address registration
    (in case of 802.15.4 6LoWPAN) will still be notified if failed, because
    dev->addr was successful.
 - add ieee802154 sub-directory in short address entry for 6lowpan UAPI.
 - add lowpan_802154_is_valid_src_short_addr, because 802.15.4 6lowpan
   defines the first bit as multicast (don't know how this can be working
   at the end, because some hardware addresses will handle such addresses
   in L2 as unicast. See:
   https://www.iana.org/assignments/_6lowpan-parameters/_6lowpan-parameters.xhtml#_6lowpan-parameters-2

changes since v2:
 - Introduce ndisc_ops to have our own implementation for dealing with NS/NA
   which allows also to support RFC6775 (e.g. ARO).
 - add handling for handling 6CO as userspace option for RA messages in
   case of 6LoWPAN interfaces.
 - change lowpan_is_ll to check on linklayer type only.
 - added some reviewed-by's.
 - move short addr slaac to net/6lowpan instead ipv6 handling.
 - add handling for context based address compression in case for
   short address as link-layer address.
 - change strategy to use short address, a short address will always be used
   when it's available.
 - Handle override flag in NA messages to update short address information or
   not.
====================
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds necessary handling for use the short address for
802.15.4 6lowpan. It contains support for IPHC address compression
and new matching algorithmn to decide which link layer address will be
used for 802.15.4 frame.
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of sending RA messages we need some way to get the short address
from an 802.15.4 6LoWPAN interface. This patch will add a temporary
debugfs entry for experimental userspace api.
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduce different 6lowpan handling for receive and transmit
NS/NA messages for the ipv6 neighbour discovery. The first use-case is
for supporting 802.15.4 short addresses inside the option fields and
handling for RFC6775 6CO option field as userspace option.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exports some neighbour discovery functions which can be used
by 6lowpan neighbour discovery ops functionality then.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces neighbour discovery ops callback structure. The
idea is to separate the handling for 6LoWPAN into the 6lowpan module.

These callback offers 6lowpan different handling, such as 802.15.4 short
address handling or RFC6775 (Neighbor Discovery Optimization for IPv6
over 6LoWPANs).

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch moves the functionality to add a RA PIO prefix generated
address in an own function. This move prepares to add a hook for
adding a second address for a second link-layer address. E.g. short
address for 802.15.4 6LoWPAN.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds __ndisc_fill_addr_option as low-level function for
ndisc_fill_addr_option which doesn't depend on net_device parameter.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds __ndisc_opt_addr_data as low-level function for
ndisc_opt_addr_data which doesn't depend on net_device parameter.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds __ndisc_opt_addr_space as low-level function for
ndisc_opt_addr_space which doesn't depend on net_device parameter.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we use exported function from ipv6 kernel module we don't need to
request the module anymore to have ipv6 functionality.
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the autoconfiguration if a valid 802.15.4 short address
is available for 802.15.4 6LoWPAN interfaces.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch will introduce a 6lowpan neighbour private data. Like the
interface private data we handle private data for generic 6lowpan and
for link-layer specific 6lowpan.

The current first use case if to save the short address for a 802.15.4
6lowpan neighbour.

Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Add SRIOV configuration via sysfs and few fixes

This series adds support to configure SR-IOV via PCI sysfs interface,
reduces resource allocation in kdump kernel by disabling offload. Also
synchronize unicast and multicast mac address, even in the interface is in
Promiscuous mode.

This patch series has been created against net-next tree and includes
patches on cxgb4 and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Even if interface is in Promiscuous mode/Allmulti mode synchronize
MAC addresses.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement callback in the driver for the new PCI bus driver
interface that allows the user to enable/disable SR-IOV
virtual functions in a device via the sysfs interface.

Deprecate module parameter used to configure SRIOV
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When is_kdump_kernel() is true, Forcing cxgb4 driver as Master so we can
reinitialize the Firmware/Chip. Also reduce memory usage by disabling
offload.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net_sched: defer skb freeing while changing qdiscs

qdiscs/classes are changed under RTNL protection and often
while blocking BH and root qdisc spinlock.

When lots of skbs need to be dropped, we free
them under these locks causing TX/RX freezes,
and more generally latency spikes.

I saw spikes of 50+ ms on quite fast hardware...

This patch series adds a simple queue protected by RTNL
where skbs can be placed until RTNL is released.

Note that this might also serve in the future for optional
reinjection of packets when a qdisc is replaced.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sfq_reset() can use rtnl_kfree_skbs() instead of kfree_skb()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pie_change() can use rtnl_qdisc_drop() to benefit from
deferred freeing.

pie_reset() is already using qdisc_reset_queue()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl_kfree_skbs() can be used in tfifo_reset()

It would be nice if we could iterate through rb tree instead
of removing one skb at a time, and build a single skb chain.
But this is left for a future patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both htb_reset() and htb_destroy() can use __qdisc_reset_queue()
instead of __skb_queue_purge() to defer skb freeing of internal
queues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both hhf_reset() and hhf_change() can use rtnl_kfree_skbs()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both fq_codel_change() and fq_codel_reset() can use rtnl_kfree_skbs()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both fq_change() and fq_reset() can use rtnl_kfree_skbs()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

codel_change() can use rtnl_qdisc_drop()
to defer expensive skb freeing after locks are released.

codel_reset() already has support for deferred skb freeing
because it uses qdisc_reset_queue()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

choke_reset() and choke_change() can use rtnl_qdisc_drop()
to defer expensive skb freeing after locks are released.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qdisc are changed under RTNL protection and often
while blocking BH and root qdisc spinlock.

When lots of skbs need to be dropped, we free
them under these locks causing TX/RX freezes,
and more generally latency spikes.

This commit adds rtnl_kfree_skbs(), used to queue
skbs for deferred freeing.

Actual freeing happens right after RTNL is released,
with appropriate scheduling points.

rtnl_qdisc_drop() can also be used in place
of disc_drop() when RTNL is held.

qdisc_reset_queue() and __qdisc_reset_queue() get
the new behavior, so standard qdiscs like pfifo, pfifo_fast...
have their ->reset() method automatically handled.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TIPC based clusters are by default set up with full-mesh link
connectivity between all nodes. Those links are expected to provide
a short failure detection time, by default set to 1500 ms. Because
of this, the background load for neighbor monitoring in an N-node
cluster increases with a factor N on each node, while the overall
monitoring traffic through the network infrastructure increases at
a ~(N * (N - 1)) rate. Experience has shown that such clusters don't
scale well beyond ~100 nodes unless we significantly increase failure
discovery tolerance.

This commit introduces a framework and an algorithm that drastically
reduces this background load, while basically maintaining the original
failure detection times across the whole cluster. Using this algorithm,
background load will now grow at a rate of ~(2 * sqrt(N)) per node, and
at ~(2 * N * sqrt(N)) in traffic overhead. As an example, each node will
now have to actively monitor 38 neighbors in a 400-node cluster, instead
of as before 399.

This "Overlapping Ring Supervision Algorithm" is completely distributed
and employs no centralized or coordinated state. It goes as follows:

- Each node makes up a linearly ascending, circular list of all its N
  known neighbors, based on their TIPC node identity. This algorithm
  must be the same on all nodes.

- The node then selects the next M = sqrt(N) - 1 nodes downstream from
  itself in the list, and chooses to actively monitor those. This is
  called its "local monitoring domain".

- It creates a domain record describing the monitoring domain, and
  piggy-backs this in the data area of all neighbor monitoring messages
  (LINK_PROTOCOL/STATE) leaving that node. This means that all nodes in
  the cluster eventually (default within 400 ms) will learn about
  its monitoring domain.

- Whenever a node discovers a change in its local domain, e.g., a node
  has been added or has gone down, it creates and sends out a new
  version of its node record to inform all neighbors about the change.

- A node receiving a domain record from anybody outside its local domain
  matches this against its own list (which may not look the same), and
  chooses to not actively monitor those members of the received domain
  record that are also present in its own list. Instead, it relies on
  indications from the direct monitoring nodes if an indirectly
  monitored node has gone up or down. If a node is indicated lost, the
  receiving node temporarily activates its own direct monitoring towards
  that node in order to confirm, or not, that it is actually gone.

- Since each node is actively monitoring sqrt(N) downstream neighbors,
  each node is also actively monitored by the same number of upstream
  neighbors. This means that all non-direct monitoring nodes normally
  will receive sqrt(N) indications that a node is gone.

- A major drawback with ring monitoring is how it handles failures that
  cause massive network partitionings. If both a lost node and all its
  direct monitoring neighbors are inside the lost partition, the nodes in
  the remaining partition will never receive indications about the loss.
  To overcome this, each node also chooses to actively monitor some
  nodes outside its local domain. Those nodes are called remote domain
  "heads", and are selected in such a way that no node in the cluster
  will be more than two direct monitoring hops away. Because of this,
  each node, apart from monitoring the member of its local domain, will
  also typically monitor sqrt(N) remote head nodes.

- As an optimization, local list status, domain status and domain
  records are marked with a generation number. This saves senders from
  unnecessarily conveying  unaltered domain records, and receivers from
  performing unneeded re-adaptations of their node monitoring list, such
  as re-assigning domain heads.

- As a measure of caution we have added the possibility to disable the
  new algorithm through configuration. We do this by keeping a threshold
  value for the cluster size; a cluster that grows beyond this value
  will switch from full-mesh to ring monitoring, and vice versa when
  it shrinks below the value. This means that if the threshold is set to
  a value larger than any anticipated cluster size (default size is 32)
  the new algorithm is effectively disabled. A patch set for altering the
  threshold value and for listing the table contents will follow shortly.

- This change is fully backwards compatible.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1. Default VRF devices to not having a qdisc (IFF_NO_QUEUE). Users
   can add one as desired.

2. Disable adding a VLAN to a VRF device.

3. Enable offloads and hardware features similar to other logical
   devices (e.g., dummy, veth)

Change provides a significant boost in TCP stream Tx performance,
from ~2,700 Mbps to ~18,100 Mbps and makes throughput close to the
performance without a VRF (18,500 Mbps). netperf TCP_STREAM benchmark
using qemu with virtio+vhost for the NICs
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 34166093 ("tuntap: use common code for virtio_net_hdr
and skb GSO conversion") replaced the tun code for header manipulation
with the generic helpers. While doing so, it implictly moved the
skb_partial_csum_set() invocation after eth_type_trans(), which
invalidate the current gso start/offset values.
Fix it by moving the helper invocation before the mac pulling.

Fixes: 34166093 ("tuntap: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael S. Tsirkin says:

====================
skb_array: array based FIFO for skbs

This is in response to the proposal by Jason to make tun
rx packet queue lockless using a circular buffer.
My testing seems to show that at least for the common usecase
in networking, which isn't lockless, circular buffer
with indices does not perform that well, because
each index access causes a cache line to bounce between
CPUs, and index access causes stalls due to the dependency.

By comparison, an array of pointers where NULL means invalid
and !NULL means valid, can be updated without messing up barriers
at all and does not have this issue.

On the flip side, cache pressure may be caused by using large queues.
tun has a queue of 1000 entries by default and that's 8K.
At this point I'm not sure this can be solved efficiently.
The correct solution might be sizing the queues appropriately.

Here's an implementation of this idea: it can be used more
or less whenever sk_buff_head can be used, except you need
to know the queue size in advance.

As this might be useful outside of networking, I implemented
a generic array of void pointers, with a type-safe wrapper for skbs.

It remains to be seen whether resizing is required, in case it is
I included patches implementing resizing by holding both the
consumer and the producer locks.

I think this code works fine without any extra memory barriers since we
always read and write the same location, so the accesses can not be
reordered.
Multiple writes of the same value into memory would mess things up
for us, I don't think compilers would do it though.
But if people feel it's better to be safe wrt compiler optimizations,
specifying queue as volatile would probably do it in a cleaner way
than converting all accesses to READ_ONCE/WRITE_ONCE. Thoughts?

The only issue is with calls within a loop using the __ptr_ring_XXX
accessors - in theory compiler could hoist accesses out of the loop.

Following volatile-considered-harmful.txt I merely
documented that callers that busy-poll should invoke cpu_relax().
Most people will use the external skb_array_XXX APIs with a spinlock,
so this should not be an issue for them.

Eric Dumazet suggested adding an extra pointer to skb for when
we have a single outstanding packet. I could not figure out
a way to implement this without a shared consumer/producer lock
though, which would cause cache line bounces by itself.

Jesper, Jason, I know that both of you tested this,
please post Tested-by tags for whatever was tested.

changes since v7
	fix typos noticed by Jesper Brouer

changes since v6
	resize implemented. peek/full calls are no longer lockless

	replaced _FIELD macros with _CALL which invoke a function
	on the pointer rather than just returning a value

	destroy now scans the array and frees all queued skbs

changes since v5
	implemented a generic ptr_ring api, and
		made skb_array a type-safe wrapper
	apis for taking the spinlock in different contexts
		following expected usecase in tun
changes since v4 (v3 was never posted)
	documentation
	dropped SKB_ARRAY_MIN_SIZE heuristic
	unit test (in userspace, included as patch 2)

changes since v2:
        fixed integer overflow pointed out by Eric.
        added some comments.

changes since v1:
        fixed bug pointed out by Eric.
====================
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update skb_array after ptr_ring API changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds ring resize support. Seems to be necessary as
users such as tun allow userspace control over queue size.

If resize is used, this costs us ability to peek at queue without
consumer lock - should not be a big deal as peek and consumer are
usually run on the same CPU.

If ring is made bigger, ring contents is preserved.  If ring is made
smaller, extra pointers are passed to an optional destructor callback.

Cleanup function also gains destructor callback such that
all pointers in queue can be cleaned up.

This changes some APIs but we don't have any users yet,
so it won't break bisect.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A simple array based FIFO of pointers.  Intended for net stack so uses
skbs for type safety. Implemented as a set of wrappers around ptr_ring.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ringtest based unit test for ptr ring.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A simple array based FIFO of pointers.  Intended for net stack which
commonly has a single consumer/producer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: vrf: Handle ipv6 multicast and link-local addresses

IPv6 multicast and link-local addresses require special handling by the
VRF driver. Rather than using the VRF device index and full FIB lookups,
packets to/from these addresses should use direct FIB lookups based on
the VRF device table.

Multicast routes do not make sense for the L3 master device directly.
Accordingly, do not add mcast routes for the device, and the VRF driver
should fail attempts to send packets to ipv6 mcast addresses on the
device (e.g, ping6 ff02::1%<vrf> should fail)

With this change connections into and out of a VRF enslaved device work
for multicast and link-local addresses (icmp, tcp, and udp).  e.g.,

1. packets into VM with VRF config:
    ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1
    ping6 -c3 ff02::1%br1
    ssh -6 fe80::e0:f9ff:fe1c:b974%br1

2. packets going out a VRF enslaved device:
    ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1
    ping6 -c3 ff02::1%eth1
    ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 multicast and link-local addresses require special handling by the
VRF driver:
1. Rather than using the VRF device index and full FIB lookups,
   packets to/from these addresses should use direct FIB lookups based on
   the VRF device table.

2. fail sends/receives on a VRF device to/from a multicast address
   (e.g, make ping6 ff02::1%<vrf> fail)

3. move the setting of the flow oif to the first dst lookup and revert
   the change in icmpv6_echo_reply made in ca254490 ("net: Add VRF
   support to IPv6 stack"). Linklocal/mcast addresses require use of the
   skb->dev.

With this change connections into and out of a VRF enslaved device work
for multicast and link-local addresses work (icmp, tcp, and udp)
e.g.,

1. packets into VM with VRF config:
    ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1
    ping6 -c3 ff02::1%br1

    ssh -6 fe80::e0:f9ff:fe1c:b974%br1

2. packets going out a VRF enslaved device:
    ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1
    ping6 -c3 ff02::1%eth1
    ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>