Merge tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci DT updates for v4.15" from Sekhar Nori:

Add support for accessing DSP on DA850 SoC when using
device-tree.

* tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx-dt: Add OF_DEV_AUXDATA entry for DSP clock matching
  ARM: dts: da850-lcdk: Add and enable CMA reserved pool for DSP
  ARM: dts: da850: Add DSP node

ARM64: DT: Hisilicon SoC DT updates for 4.15

- Add CoreSight related nodes for hi6220
- Add GPIO line names for hikey960
- Rectify the GPIO line names of the Poplar board to keep consistency
- Add thermal sensor binding doc and dt nodes for hi3660

* tag 'hisi-arm64-dt-for-4.15' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Register Hi3660's thermal sensor
  dt-bindings: Document the hi3660 thermal sensor binding
  arm64: dts: hisilicon: Standardize Poplar GPIO line names
  arm64: dts: hikey960: Update HiKey960 with GPIO line names
  arm64: dts: hi6220: add coresight dt nodes

The Faraday TVE200 is present in the Gemini SoC, sometimes
under the name "TVC". Add it to the SoC DTSI file along with
its resources.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/soc

Pull "ARMv8 Vexpress/Juno DT update for v4.15" from Sudeep Holla:

Just single update to enable PSCI support on Foundation models

* tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: foundation-v8: Enable PSCI mode

Merge tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/soc

Pull "ASPEED devicetree updates for 4.15" from Joel Stanley:

 - Cleanups of the ASPEED device trees
 - Enable the i2c bus on all platforms
 - Turn VUART on for BMC platforms
 - Bind watchdog two for compatilbiy with shipping u-boot

* tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed-romulus: Enable VUART
  ARM: dts: aspeed-palmetto: Enable VUART
  ARM: dts: aspeed: Enable watchdog two
  ARM: dts: aspeed: Remove undocumented wdt properties
  ARM: dts: aspeed: Clean up UART nodes
  ARM: dts: aspeed: Correctly order UART nodes
  ARM: dts: aspeed: Add aliases for UARTs
  ARM: dts: aspeed-ast2500: Add I2C devices
  ARM: dts: aspeed-palmetto: Add I2C devices
  ARM: dts: aspeed-romulus: Add I2C devices
  ARM: dts: aspeed: Add I2C buses
  ARM: dts: aspeed: Reorder ADC node
  ARM: dts: aspeed: Move pinctrl subnodes to improve readability

Merge tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc

Pull "SoCFPGA DTS updates for v4.15" from Dinh Nguyen:
- Stratix10 platform updates
  - Fix up gic register entry
  - Enable ethernet/SDMMC
  - Update reset manager properties

* tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: stratix10: add reset property for various peripherals
  arm64: dts: stratix10: add the 'altr,modrst-off' property
  arm64: dts: stratix10: include the reset manager bindings
  arm64: dts: stratix10: add ethernet/sdmmc support to the S10 devkit
  arm64: dts: stratix10: fix up the gic register for the Stratix10 platform

Merge tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman:

* r7s72100 (RZ/A1) Peach board
  - Add pin groups for SCIF2 serial debug interface and Ethernet
    This avoids relying on bootloader settings
  - Support control of LED1 using gpio-leds

* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
  - Add MSIOF[012] support and define aliases for spi[0123]

* r8a7743 (RZ/G1M) SoC
  - Add I2C and IIC core nodes

* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
   - Enable SDHI1 SD controller supporting high-speed and SDR50 transfers
   - Add chosen node to allow correct selection of serial console
     and the kernel command line
   - Enable RTC support
   - Enable USB2.0 host support
     This includes enabling USB PHY and internal PCI

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven and
  r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoMs
   - Enable Add SPI NOR support
     This devices is used to boot up the system to the SoM DT

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
  - Enable SDHI0 SD controller supporting high-speed transfers

* r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
  - Add pnctl support for scif4
    This avoids reling on boot loader settings
  - Add EtherAVB support

* r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoM
  - Add basic SoM support
  - Enable MMCIF eMMC support
  - Enable RTC support
  - Enable SDHI1 SD controller supporting high-speed transfers

* r8a779[0-4] R-Car Gen2 SoCs
  - Add reset control properties
    Geert Uytterhoeven says:

    This patch series describes the reset topology on all R-Car Gen2 Socs,
    like was done before for R-Car Gen3 and RZ/G1.

    Resets usually match the corresponding module clocks.  Exceptions are:
      - The audio module has resets for the Serial Sound Interfaces only,
      - The display module has only a single reset for all DU channels, but
	adding reset properties for the display is postponed upon request
	from Laurent.

   - Convert to new CPG/MSSR bindings
     Geert Uytterhoven says:

     Currently Renesas R-Car Gen2 SoCs use the common clk-rcar-gen2,
     clk-mstp, and clk-div6 drivers, which depend on most clocks being
     described in DT.  Especially the module (MSTP) clocks are cumbersome
     and error prone, due to 3 arrays (clocks, clock-indices, and
     clock-output-names) to be kept in sync. In addition, the clk-mstp
     driver cannot be extended easily to also support module resets, which
     are provided by the same hardware module.

     Hence when developing support for R-Car Gen3 SoCs, another approach
     was chosen, which led to the CPG/MSSR driver core, and SoC-specific
     subdrivers (initially for R-Car Gen3, but later also for RZ/G1).

     This series converts the various R-Car Gen2 DTSes to migrate to the
     new CPG/MSSR drivers that were added in v4.13-rc1.

* r8a779[0,1,3,4] R-Car Gen2 SoCs
  - Stop grouping clocks under a "clocks" subnode
    Geert Uytterhoeven says:

    The current practice is to not group clocks under a "clocks" subnode,
    but just put them together with the other on-SoC devices.

    Hence this patch series implements this for the various R-Car Gen2
    DTSes that still need this (r8a7792.dtsi is OK).

* r8a7794 (E2) Alt board
  - Correct inverted sense of SD wip pins

* tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (48 commits)
  ARM: dts: r8a7743: Add MSIOF[012] support
  ARM: dts: r8a7745: Add MSIOF[012] support
  ARM: dts: iwg22d: Enable SDHI0 controller
  ARM: dts: iwg22m: Add SPI NOR support
  ARM: dts: r8a7745: Add QSPI support
  ARM: dts: iwg20m: Add SPI NOR support
  ARM: dts: r8a7743: Add QSPI support
  ARM: dts: iwg22m: Enable SDHI1 controller
  ARM: dts: r8a7745: Add SDHI controllers
  ARM: dts: r8a7794: Add reset control properties
  ARM: dts: r8a7793: Add reset control properties
  ARM: dts: r8a7792: Add reset control properties
  ARM: dts: r8a7791: Add reset control properties
  ARM: dts: r8a7790: Add reset control properties
  ARM: dts: r8a7743: Add IIC cores to dtsi
  ARM: dts: alt: use correct logic for SD WP pins
  ARM: dts: iwg20d-q7: Enable USB PHY
  ARM: dts: iwg20d-q7: Enable internal PCI
  ARM: dts: r8a7743: Link PCI USB devices to USB PHY
  ARM: dts: r8a7743: Add USB PHY DT support
  ...

Merge tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC DT Bindings Updates for v4.15" from Simon Horman:

* Consistently do not use ';' in documentation of compat strings
  for boards. A misture of using and not using a trailing ';' had
  krept in over time with not using being dominant.

* Document bindings for
  - Eagle board and r8a77970 (V3M) SoC bindings.
    Eagle is a board for the V3M SoC
  - Document Kingfisher board bindings.
    Kingfisher is an extension board for the H3ULCB and M3ULCB boards.

* Add r8a77970 (V3M) SYSC power domain definitions

  Add macros usable by the device tree sources to reference r8a77970 SYSC
  power domains by index.

* Add Renesas SoC DT bindings doc to Renesas ARM section of MAINTAINERS file

* Drop bogus node name suffix from example of /renesas,dw-hdmi binding

* Document APMU and SMP enable method for r8a7745 (RZ/G1E) SoC

* tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: remove inconsistent ; from documentation
  arm64: renesas: document Eagle board bindings
  arm: shmobile: Document Kingfisher board DT bindings
  dt-bindings: power: add R8A77970 SYSC power domain definitions
  MAINTAINERS: Add Renesas SoC DT bindings doc to Renesas ARM sections
  ARM: shmobile: Document R-Car V3M SoC DT bindings
  dt-bindings: display: renesas: dw-hdmi: Drop bogus node name suffix
  dt-bindings: apmu: Document r8a7745 support

Merge tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:

* r8a7795 (H3)
  - Use r8a7795-cpg-mssr and r8a7795-sysc bindings
    Hardcoded indicies are replaced with symbols now that they are available

  - Drop bogus HDMI node name suffixes
    Laurent Pinchart says: Node names should not use numerical suffixes if
    the nodes can be distinguished by unit-address

  - Update PFC node name to pin-controller
    Shimoda-san says the PFC node name is changed "from e6060000.pfc and
    pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000
    like other Renesas SoCs."

* r8a7795 (H3) ES1.0
  - Drop extra zero from XHCI unit address
    This corrects a typo were ee0400000 rather than ee040000 was used
    as the unit address.

* r8a7796 (M3-W)
  - Add FDP1 instance
    Laurent Pinchart says: The r8a7796 has a single FDP1 instance.

* r8a7795 (H3) and r8a7796 (M3-W) SoCs
  - Add USB3.0 peripheral device nodes
    Shimoda-san says that this is not enabled on the Salvator-X/XS boards
    for now as:
     + we need a special cable (USB type-A to A cross cable).
     + we can swap the role by renesas_usb3 driver even if we use a normal
	cable and after usb3.0 host is running, but I think it's a special
	use case.

* r8a7795 (H3) and r8a7796 (M3-W) ULCB boards
  - Enable display output
    Laurent Pinchart says: The DU is already wired up to the HDMI encoder,
    all we need to do is enable it.

* r8a77995 (D3) Draak board
  - Enable EthernetAVB and , USB2.0 Host and PHY

  - Add serial console pins.
    This is safe to do now that r8a77995 PFC driver support is present

* r8a77970 (V3M)
  - Add basic support for SoC and EtherAVB, [H]SCIF and SYS-DMAC nodes
    This is a step towards enabling EtherAVB and [H]SCIF with SYS-DMAC
    in the Eagle board support for which is under review

* tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  arm64: dts: renesas: r8a7796: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a7795: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a77995: draak: enable EthernetAVB
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 Host (EHCI/OHCI)
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 PHY
  arm64: dts: renesas: r8a77995: add USB2.0 Host (EHCI/OHCI) device node
  arm64: dts: renesas: r8a77995: Add USB2.0 PHY device node
  arm64: dts: draak: Add serial console pins
  arm64: dts: renesas: r8a77970: add EtherAVB support
  arm64: dts: renesas: r8a77970: add [H]SCIF support
  arm64: dts: renesas: r8a77970: add SYS-DMAC support
  arm64: dts: renesas: initial R8A77970 SoC device tree
  arm64: dts: renesas: r8a77995: Add EthernetAVB device node
  arm64: dts: renesas: r8a77995: add GPIO device nodes
  arm64: dts: renesas: r8a77995: Use r8a7795-cpg-mssr binding definitions
  arm64: dts: renesas: r8a77995: Use r8a7795-sysc binding definitions
  arm64: renesas: Add Renesas R8A77970 Kconfig support
  arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes
  arm64: dts: renesas: ulcb: Enable display output
  arm64: dts: renesas: r8a77995: update PFC node name to pin-controller
  ...

Merge tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Pull "DTS updates for the Integrator PCIv3 driver" from Linus Walleij:

These are the DTS file changes required to fix bugs and satisfy
requirements for the new PCIv3 driver in the PCI subsystem.
The binding changes have been merged to the PCI tree.

[arnd] Note: this is an incompatible DT binding change, so things
       will break during bisection or when using an old dtb file.
       Since integrator has no real users, we can make an exception
       for that.

* tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: Update Integrator/AP PCI v3 compatible
  ARM: dts: integratorap: Fix PCI windows
  ARM: dts: add the PCI clock to the device tree

Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*'
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*'

Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some
occurrences of uppercase hex.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

"interrupt-parent" property is declared in root node, so it is global
to all nodes. This property is re-declared in few sub-nodes. To avoid
duplication this property is removed from following sub-nodes:
pmu, amba@0, amba@0/ethernet.
Signed-off-by: Surender Polsani <surenderp@techveda.org>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add binding for tsensor on H3660, this tsensor is used for
SoC thermal control, it supports alarm interrupt.
Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This adds documentation of device tree bindings for the
thermal sensor controller of hi3660 SoC.
Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The hi6220-HiKey board started to name GPIO lines for
96boards, using just the plain names "GPIO-A" etc from the
96boards specification.

Poplar started to use an arbitrary "LS-GPIO-A" (etc) prefix
that is not part of the 96boards specification.

As the former notation arrived first, and we need
consistency among 96board, rectify the Poplar board to use
this too. This is important for userspace that wants to
look up GPIO names from these strings.

Cc: Jiancheng Xue <xuejiancheng@hisilicon.com>
Cc: Alex Elder <elder@linaro.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This adds line names for all the GPIOs I could identify on the HiKey960
schematic.

"GPIO-A" through "GPIO-L" are the most important since they give users
a handle to look up the standard 96boards GPIOs from the GPIO character
device.

The rest of the names are more informational, nice debug information
for "lsgpio" so you can see that the right line is taken for the right
function in the kernel for example.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Zhangfei Gao <zhangfei.gao@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

For detailed coresight topology, Hi6220 has 8xCA53 CPUs and each CPU
has one Embedded Trace Macrocell (ETM); the CPU trace data is output
to the cluster funnel. Due system has another CPU and one MCU, all of
them transfer the trace data through trace bus (ATB) to SoC funnel;
the SoC funnel is connected to Embedded Trace FIFO (ETF) with 8KB
buffer; an non-configurable replicator is used to output trace data
for two sinks, one is Embedded Trace Route (ETR) so trace data can be
saved into DRAM, another is Trace Port Interface Unit (TPIU) for
capturing trace data by external debugger.

According to the Hi6220 coresight topology, this patch is to add
coresight dt nodes.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Pull SCSI fixes from James Bottomley:

 - a couple of serious fixes: use after free and blacklist for WRITE
   SAME

 - one error leg fix: write_pending failure

 - one user experience problem: do not override max_sectors_kb

 - one minor unused function removal

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsis: Fix write_pending failure path
  scsi: libiscsi: Remove iscsi_destroy_session
  scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown
  scsi: sd: Do not override max_sectors_kb sysfs setting
  scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP

Pull i2c fixes from Wolfram Sang:
 "I2C has three driver fixes for the newly introduced drivers and one ID
  addition for the i801 driver"

* 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-stm32f7: make structure stm32f7_setup static const
  i2c: ensure termination of *_device_id tables
  i2c: i801: Add support for Intel Cedar Fork
  i2c: stm32f7: fix setup structure

Pull MMC fixes from Ulf Hansson:
 "MMC core:

   - Fix driver strength selection when selecting hs400es

   - Delete bounce buffer handling:

     This change fixes a problem related to how bounce buffers are being
     allocated. However, instead of trying to fix that, let's just
     remove the mmc bounce buffer code altogether, as it has practically
     no use.

  MMC host:

   - meson-gx: A couple of fixes related to clock/phase/tuning

   - sdhci-xenon: Fix clock resource by adding an optional bus clock"

* tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock
  mmc: meson-gx: include tx phase in the tuning process
  mmc: meson-gx: fix rx phase reset
  mmc: meson-gx: make sure the clock is rounded down
  mmc: Delete bounce buffer handling
  mmc: core: add driver strength selection when selecting hs400es

Merge tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix up error path in xgene driver"

* tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (xgene) Fix up error handling path mixup in 'xgene_hwmon_probe()'

Pull clk fixes from Stephen Boyd:

 - build fix to export the clk_bulk_prepare() symbol

 - suspend fix for Samsung Exynos SoCs where we need to keep clks on
   across suspend

 - two critical clk markings for clks that shouldn't ever turn off on
   Rockchip SoCs

 - a fix for a copy-paste mistake on Rockchip rk3128 causing some clks
   to touch the same bit and trample over one another

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycle
  clk: Export clk_bulk_prepare()
  clk: rockchip: add sclk_timer5 as critical clock on rk3128
  clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error
  clk: rockchip: add pclk_pmu as critical clock on rk3128

Pull ARC udpates from Vineet Gupta:

 - updates for various platforms

 - boot log updates for upcoming HS48 family of cores (dual issue)

* tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset
  ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz
  ARC: fix allnoconfig build warning
  ARCv2: boot log: identify HS48 cores (dual issue)
  ARC: boot log: decontaminate ARCv2 ISA_CONFIG register
  arc: remove redundant UTS_MACHINE define in arch/arc/Makefile
  ARC: [plat-eznps] Update platform maintainer as Noam left
  ARC: [plat-hsdk] use actual clk driver to manage cpu clk
  ARC: [*defconfig] Reenable soft lock-up detector
  ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency
  ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency
  ARC: [plat-axs103] Add temporary quirk to reset ethernet IP

Pull xfs fixes from Darrick Wong:

 - fix a race between overlapping copy on write aio

 - fix cow fork swapping when we defragment reflinked files

* tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: handle racy AIO in xfs_reflink_end_cow
  xfs: always swap the cow forks when swapping extents

Pull block fixes from Jens Axboe:
 "A collection of fixes for this series. This contains:

   - NVMe pull request from Christoph, one uuid attribute fix, and one
     fix for the controller memory buffer address for remapped BARs.

   - use-after-free fix for bsg, from Benjamin Block.

   - bcache race/use-after-free fix for a list traversal, fixing a
     regression in this merge window. From Coly Li.

   - null_blk change configfs dependency change from a 'depends' to a
     'select'. This is a change from this merge window as well. From me.

   - nbd signal fix from Josef, fixing a regression introduced with the
     status code changes.

   - nbd MAINTAINERS mailing list entry update.

   - blk-throttle stall fix from Joseph Qi.

   - blk-mq-debugfs fix from Omar, fixing an issue where we don't
     register the IO scheduler debugfs directory, if the driver is
     loaded with it. Only shows up if you switch through the sysfs
     interface"

* 'for-linus' of git://git.kernel.dk/linux-block:
  bsg-lib: fix use-after-free under memory-pressure
  nvme-pci: Use PCI bus address for data/queues in CMB
  blk-mq-debugfs: fix device sched directory for default scheduler
  null_blk: change configfs dependency to select
  blk-throttle: fix possible io stall when upgrade to max
  MAINTAINERS: update list for NBD
  nbd: fix -ERESTARTSYS handling
  nvme: fix visibility of "uuid" ns attribute
  bcache: use llist_for_each_entry_safe() in __closure_wake_up()

Pull PCI fixes from Bjorn Helgaas:
 "Fix legacy IDE probe issues exposed by recent PCI core IRQ mapping
  changes (Bartlomiej Zolnierkiewicz, Lorenzo Pieralisi)"

* tag 'pci-v4.14-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ide: fix IRQ assignment for PCI bus order probing
  ide: pci: free PCI BARs on initialization failure
  ide: free hwif->portdev on hwif_init() failure

Pull arm64 fixes from Catalin Marinas:

 - Bring initialisation of user space undefined instruction handling
   early (core_initcall) since late_initcall() happens after modprobe in
   initramfs is invoked. Similar fix for fpsimd initialisation

 - Increase the kernel stack when KASAN is enabled

 - Bring the PCI ACS enabling earlier via the
   iort_init_platform_devices()

 - Fix misleading data abort address printing (decimal vs hex)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Ensure fpsimd support is ready before userspace is active
  arm64: Ensure the instruction emulation is ready for userspace
  arm64: Use larger stacks when KASAN is selected
  ACPI/IORT: Fix PCI ACS enablement
  arm64: fix misleading data abort decoding

Pull KVM fixes from Radim Krčmář:

 - fix PPC XIVE interrupt delivery

 - fix x86 RCU breakage from asynchronous page faults when built without
   PREEMPT_COUNT

 - fix x86 build with -frecord-gcc-switches

 - fix x86 build without X86_LOCAL_APIC

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: add X86_LOCAL_APIC dependency
  x86/kvm: Move kvm_fastop_exception to .fixup section
  kvm/x86: Avoid async PF preempting the kernel incorrectly
  KVM: PPC: Book3S: Fix server always zero from kvmppc_xive_get_xive()

Pull rdma fixes from Doug Ledford:
 "This is a pretty small pull request. Only 6 patches in total. There
  are no outstanding -rc patches on the mailing list after this pull
  request, so only if some new issues are discovered in the remainder of
  the rc cycles will you hear from me again.

  Summary:
   - a fix for iwpm netlink usage
   - a fix for error unwinding in mlx5
   - two fixes to vlan handling in qedr
   - a couple small i40iw fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  i40iw: Fix port number for query QP
  i40iw: Add missing memory barriers
  RDMA/qedr: Parse vlan priority as sl
  RDMA/qedr: Parse VLAN ID correctly and ignore the value of zero
  IB/mlx5: Fix label order in error path handling
  RDMA/iwpm: Properly mark end of NL messages

Pull btrfs fixes from David Sterba:
 "Two more fixes for bugs introduced in 4.13.

  The sector_t problem with 32bit architecture and !LBDAF config seems
  serious but the number of affected deployments is hopefully low.

  The clashing status bits could lead to a confusing in-memory state of
  the whole-filesystem operations if used with the quota override sysfs
  knob"

* 'for-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix overlap of fs_info::flags values
  btrfs: avoid overflow when sector_t is 32 bit

Pull ceph fixes from Ilya Dryomov:
 "Two fixups for CephFS snapshot-handling patches in -rc1"

* tag 'ceph-for-4.14-rc4' of git://github.com/ceph/ceph-client:
  ceph: fix __choose_mds() for LSSNAP request
  ceph: properly queue cap snap for newly created snap realm

DW ethernet controller on HSDK hangs sometimes after SW reset, so
add reset node to make possible to reset DW ethernet controller HW.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull overlayfs fixes from Miklos Szeredi:
 "Fix a regression in 4.14 and one in 4.13. The latter is a case when
  Docker is doing something it really shouldn't and gets away with it.
  We now print a warning instead of erroring out.

  There are also fixes to several error paths"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix regression caused by exclusive upper/work dir protection
  ovl: fix missing unlock_rename() in ovl_do_copy_up()
  ovl: fix dentry leak in ovl_indexdir_cleanup()
  ovl: fix dput() of ERR_PTR in ovl_cleanup_index()
  ovl: fix error value printed in ovl_lookup_index()
  ovl: fix may_write_real() for overlayfs directories

Pull powerpc fixes from Michael Ellerman:
 "Nine small fixes, really nothing that stands out.

  A work-around for a spurious MCE on Power9. A CXL fault handling fix,
  some fixes to the new XIVE code, and a fix to the new 32-bit
  STRICT_KERNEL_RWX code.

  Fixes for old code/stable: an fix to an incorrect TLB flush on boot
  but not on any current machines, a compile error on 4xx and a fix to
  memory hotplug when using radix (Power9).

  Thanks to: Anton Blanchard, Cédric Le Goater, Christian Lamparter,
  Christophe Leroy, Christophe Lombard, Guenter Roeck, Jeremy Kerr,
  Michael Neuling, Nicholas Piggin"

* tag 'powerpc-4.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Increase memory block size to 1GB on radix
  powerpc/mm: Call flush_tlb_kernel_range with interrupts enabled
  powerpc/xive: Clear XIVE internal structures when a CPU is removed
  powerpc/xive: Fix IPI reset
  powerpc/4xx: Fix compile error with 64K pages on 40x, 44x
  powerpc: Fix action argument for cpufeatures-based TLB flush
  cxl: Fix memory page not handled
  powerpc: Fix workaround for spurious MCE on POWER9
  powerpc: Handle MCE on POWER9 with only DSISR bit 30 set

Pull drm fixes from Dave Airlie:
 "Some i915 fixes from the last two weeks (as they were on a strange
  base and I just waited for rc3), also a single sun4i hdmi fix"

* tag 'drm-fixes-for-v4.14-rc4' of git://people.freedesktop.org/~airlied/linux:
  drm/i915/glk: Fix DMC/DC state idleness calculation
  drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume
  drm/i915: Fix DDI PHY init if it was already on
  drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
  drm/i915/bios: ignore HDMI on port A
  drm/i915: remove redundant variable hw_check
  drm/i915: always update ELD connector type after get modes

Pull watchddog clean-up and fixes from Thomas Gleixner:
 "The watchdog (hard/softlockup detector) code is pretty much broken in
  its current state. The patch series addresses this by removing all
  duct tape and refactoring it into a workable state.

  The reasons why I ask for inclusion that late in the cycle are:

   1) The code causes lockdep splats vs. hotplug locking which get
      reported over and over. Unfortunately there is no easy fix.

   2) The risk of breakage is minimal because it's already broken

   3) As 4.14 is a long term stable kernel, I prefer to have working
      watchdog code in that and the lockdep issues resolved. I wouldn't
      ask you to pull if 4.14 wouldn't be a LTS kernel or if the
      solution would be easy to backport.

   4) The series was around before the merge window opened, but then got
      delayed due to the UP failure caused by the for_each_cpu()
      surprise which we discussed recently.

  Changes vs. V1:

   - Addressed your review points

   - Addressed the warning in the powerpc code which was discovered late

   - Changed two function names which made sense up to a certain point
     in the series. Now they match what they do in the end.

   - Fixed a 'unused variable' warning, which got not detected by the
     intel robot. I triggered it when trying all possible related config
     combinations manually. Randconfig testing seems not random enough.

  The changes have been tested by and reviewed by Don Zickus and tested
  and acked by Micheal Ellerman for powerpc"

* 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  watchdog/core: Put softlockup_threads_initialized under ifdef guard
  watchdog/core: Rename some softlockup_* functions
  powerpc/watchdog: Make use of watchdog_nmi_probe()
  watchdog/core, powerpc: Lock cpus across reconfiguration
  watchdog/core, powerpc: Replace watchdog_nmi_reconfigure()
  watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently"
  watchdog/hardlockup/perf: Cure UP damage
  watchdog/hardlockup: Clean up hotplug locking mess
  watchdog/hardlockup/perf: Simplify deferred event destroy
  watchdog/hardlockup/perf: Use new perf CPU enable mechanism
  watchdog/hardlockup/perf: Implement CPU enable replacement
  watchdog/hardlockup/perf: Implement init time detection of perf
  watchdog/hardlockup/perf: Implement init time perf validation
  watchdog/core: Get rid of the racy update loop
  watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage
  watchdog/sysctl: Clean up sysctl variable name space
  watchdog/sysctl: Get rid of the #ifdeffery
  watchdog/core: Clean up header mess
  watchdog/core: Further simplify sysctl handling
  watchdog/core: Get rid of the thread teardown/setup dance
  ...

We register the pm/hotplug callbacks for FPSIMD as late_initcall,
which happens after the userspace is active (from initramfs via
populate_rootfs, a rootfs_initcall). Make sure we are ready even
before the userspace could potentially use it, by promoting to
a core_initcall.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We trap and emulate some instructions (e.g, mrs, deprecated instructions)
for the userspace. However the handlers for these are registered as
late_initcalls and the userspace could be up and running from the initramfs
by that time (with populate_rootfs, which is a rootfs_initcall()). This
could cause problems for the early applications ending up in failure
like :

[   11.152061] modprobe[93]: undefined instruction: pc=0000ffff8ca48ff4

This patch promotes the specific calls to core_initcalls, which are
guaranteed to be completed before we hit userspace.

Cc: stable@vger.kernel.org
Cc: Dave Martin <dave.martin@arm.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: James Morse <james.morse@arm.com>
Reported-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>