While testing some other work that required JIT modifications, I
run into test_bpf causing a hang when JIT enabled on s390. The
problematic test case was the one from ddc665a4 (bpf, arm64:
fix jit branch offset related to ldimm64), and turns out that we
do have a similar issue on s390 as well. In bpf_jit_prog() we
update next instruction address after returning from bpf_jit_insn()
with an insn_count. bpf_jit_insn() returns either -1 in case of
error (e.g. unsupported insn), 1 or 2. The latter is only the
case for ldimm64 due to spanning 2 insns, however, next address
is only set to i + 1 not taking actual insn_count into account,
thus fix is to use insn_count instead of 1. bpf_jit_enable in
mode 2 provides also disasm on s390:

Before fix:

  000003ff800349b6: a7f40003   brc     15,3ff800349bc                 ; target
  000003ff800349ba: 0000               unknown
  000003ff800349bc: e3b0f0700024       stg     %r11,112(%r15)
  000003ff800349c2: e3e0f0880024       stg     %r14,136(%r15)
  000003ff800349c8: 0db0               basr    %r11,%r0
  000003ff800349ca: c0ef00000000       llilf   %r14,0
  000003ff800349d0: e320b0360004       lg      %r2,54(%r11)
  000003ff800349d6: e330b03e0004       lg      %r3,62(%r11)
  000003ff800349dc: ec23ffeda065       clgrj   %r2,%r3,10,3ff800349b6 ; jmp
  000003ff800349e2: e3e0b0460004       lg      %r14,70(%r11)
  000003ff800349e8: e3e0b04e0004       lg      %r14,78(%r11)
  000003ff800349ee: b904002e   lgr     %r2,%r14
  000003ff800349f2: e3b0f0700004       lg      %r11,112(%r15)
  000003ff800349f8: e3e0f0880004       lg      %r14,136(%r15)
  000003ff800349fe: 07fe               bcr     15,%r14

After fix:

  000003ff80ef3db4: a7f40003   brc     15,3ff80ef3dba
  000003ff80ef3db8: 0000               unknown
  000003ff80ef3dba: e3b0f0700024       stg     %r11,112(%r15)
  000003ff80ef3dc0: e3e0f0880024       stg     %r14,136(%r15)
  000003ff80ef3dc6: 0db0               basr    %r11,%r0
  000003ff80ef3dc8: c0ef00000000       llilf   %r14,0
  000003ff80ef3dce: e320b0360004       lg      %r2,54(%r11)
  000003ff80ef3dd4: e330b03e0004       lg      %r3,62(%r11)
  000003ff80ef3dda: ec230006a065       clgrj   %r2,%r3,10,3ff80ef3de6 ; jmp
  000003ff80ef3de0: e3e0b0460004       lg      %r14,70(%r11)
  000003ff80ef3de6: e3e0b04e0004       lg      %r14,78(%r11)          ; target
  000003ff80ef3dec: b904002e   lgr     %r2,%r14
  000003ff80ef3df0: e3b0f0700004       lg      %r11,112(%r15)
  000003ff80ef3df6: e3e0f0880004       lg      %r14,136(%r15)
  000003ff80ef3dfc: 07fe               bcr     15,%r14

test_bpf.ko suite runs fine after the fix.

Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Couple of fixes

Ido says:

The first patch prevents us from warning about valid situations that can
happen due to the fact that some operations in switchdev are deferred.

Second patch fixes a long standing problem in which we didn't correctly
free resources upon module removal, resulting in a memory leak.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Each multicast group (MID) stores a bitmap of ports to which a packet
should be forwarded to in case an MDB entry associated with the MID is
hit.

Since the initial introduction of IGMP snooping in commit 3a49b4fd
("mlxsw: Adding layer 2 multicast support") the driver didn't correctly
free these multicast groups upon ungraceful situations such as the
removal of the upper bridge device or module removal.

The correct way to fix this is to associate each MID with the bridge
ports member in it and then drop the reference in case the bridge port
is destroyed, but this will result in a lot more code and will be fixed
in net-next.

For now, upon module removal, traverse the MID list and release each
one.

Fixes: 3a49b4fd ("mlxsw: Adding layer 2 multicast support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some operations in the bridge driver such as MDB deletion are preformed
in an atomic context and thus deferred to a process context by the
switchdev infrastructure.

Therefore, by the time the operation is performed by the underlying
device driver it's possible the bridge port context is already gone.
This is especially true for removal flows, but theoretically can also be
invoked during addition.

Remove the warnings in such situations and return normally.

Fixes: c57529e1 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Fixes: 3922285d ("net: bridge: Add support for offloading port attributes")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neal Cardwell says:

====================
tcp: fix xmit timer rearming to avoid stalls

This patch series is a bug fix for a TCP loss recovery performance bug
reported independently in recent netdev threads:

 (i)  July 26, 2017: netdev thread "TCP fast retransmit issues"
 (ii) July 26, 2017: netdev thread:
       "[PATCH V2 net-next] TLP: Don't reschedule PTO when there's one
       outstanding TLP retransmission"

Many thanks to Klavs Klavsen and Mao Wenan for the detailed reports,
traces, and packetdrill test cases, which enabled us to root-cause
this issue and verify the fix.

- v1 -> v2:
 - In patch 2/3, changed an unclear comment in the pre-existing code
   in tcp_schedule_loss_probe() to be more clear (thanks to Eric Dumazet
   for suggesting we improve this).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a TCP loss recovery performance bug raised recently on the netdev
list, in two threads:

(i)  July 26, 2017: netdev thread "TCP fast retransmit issues"
(ii) July 26, 2017: netdev thread:
     "[PATCH V2 net-next] TLP: Don't reschedule PTO when there's one
     outstanding TLP retransmission"

The basic problem is that incoming TCP packets that did not indicate
forward progress could cause the xmit timer (TLP or RTO) to be rearmed
and pushed back in time. In certain corner cases this could result in
the following problems noted in these threads:

 - Repeated ACKs coming in with bogus SACKs corrupted by middleboxes
   could cause TCP to repeatedly schedule TLPs forever. We kept
   sending TLPs after every ~200ms, which elicited bogus SACKs, which
   caused more TLPs, ad infinitum; we never fired an RTO to fill in
   the holes.

 - Incoming data segments could, in some cases, cause us to reschedule
   our RTO or TLP timer further out in time, for no good reason. This
   could cause repeated inbound data to result in stalls in outbound
   data, in the presence of packet loss.

This commit fixes these bugs by changing the TLP and RTO ACK
processing to:

 (a) Only reschedule the xmit timer once per ACK.

 (b) Only reschedule the xmit timer if tcp_clean_rtx_queue() deems the
     ACK indicates sufficient forward progress (a packet was
     cumulatively ACKed, or we got a SACK for a packet that was sent
     before the most recent retransmit of the write queue head).

This brings us back into closer compliance with the RFCs, since, as
the comment for tcp_rearm_rto() notes, we should only restart the RTO
timer after forward progress on the connection. Previously we were
restarting the xmit timer even in these cases where there was no
forward progress.

As a side benefit, this commit simplifies and speeds up the TCP timer
arming logic. We had been calling inet_csk_reset_xmit_timer() three
times on normal ACKs that cumulatively acknowledged some data:

1) Once near the top of tcp_ack() to switch from TLP timer to RTO:
        if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE)
               tcp_rearm_rto(sk);

2) Once in tcp_clean_rtx_queue(), to update the RTO:
        if (flag & FLAG_ACKED) {
               tcp_rearm_rto(sk);

3) Once in tcp_ack() after tcp_fastretrans_alert() to switch from RTO
   to TLP:
        if (icsk->icsk_pending == ICSK_TIME_RETRANS)
               tcp_schedule_loss_probe(sk);

This commit, by only rescheduling the xmit timer once per ACK,
simplifies the code and reduces CPU overhead.

This commit was tested in an A/B test with Google web server
traffic. SNMP stats and request latency metrics were within noise
levels, substantiating that for normal web traffic patterns this is a
rare issue. This commit was also tested with packetdrill tests to
verify that it fixes the timer behavior in the corner cases discussed
in the netdev threads mentioned above.

This patch is a bug fix patch intended to be queued for -stable
relases.

Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)")
Reported-by: Klavs Klavsen <kl@vsen.dk>
Reported-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Have tcp_schedule_loss_probe() base the TLP scheduling decision based
on when the RTO *should* fire. This is to enable the upcoming xmit
timer fix in this series, where tcp_schedule_loss_probe() cannot
assume that the last timer installed was an RTO timer (because we are
no longer doing the "rearm RTO, rearm RTO, rearm TLP" dance on every
ACK). So tcp_schedule_loss_probe() must independently figure out when
an RTO would want to fire.

In the new TLP implementation following in this series, we cannot
assume that icsk_timeout was set based on an RTO; after processing a
cumulative ACK the icsk_timeout we see can be from a previous TLP or
RTO. So we need to independently recalculate the RTO time (instead of
reading it out of icsk_timeout). Removing this dependency on the
nature of icsk_timeout makes things a little easier to reason about
anyway.

Note that the old and new code should be equivalent, since they are
both saying: "if the RTO is in the future, but at an earlier time than
the normal TLP time, then set the TLP timer to fire when the RTO would
have fired".

Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pure refactor. This helper will be required in the xmit timer fix
later in the patch series. (Because the TLP logic will want to make
this calculation.)

Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit c2ed1880 ("net: ipv6: check route protocol when
deleting routes"), ipv6 route checks rt protocol when trying to
remove a rt entry.

It introduced a side effect causing 'ip -6 route flush cache' not
to work well. When flushing caches with iproute, all route caches
get dumped from kernel then removed one by one by sending DELROUTE
requests to kernel for each cache.

The thing is iproute sends the request with the cache whose proto
is set with RTPROT_REDIRECT by rt6_fill_node() when kernel dumps
it. But in kernel the rt_cache protocol is still 0, which causes
the cache not to be matched and removed.

So the real reason is rt6i_protocol in the route is not set when
it is allocated. As David Ahern's suggestion, this patch is to
set rt6i_protocol properly in the route when it is installed and
remove the codes setting rtm_protocol according to rt6i_flags in
rt6_fill_node.

This is also an improvement to keep rt6i_protocol consistent with
rtm_protocol.

Fixes: c2ed1880 ("net: ipv6: check route protocol when deleting routes")
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller was able to trigger a divide by 0 in TCP stack [1]

Issue here is that keepalive timer needs to be updated to not attempt
to send a probe if the connection setup was deferred using
TCP_FASTOPEN_CONNECT socket option added in linux-4.11

[1]
 divide error: 0000 [#1] SMP
 CPU: 18 PID: 0 Comm: swapper/18 Not tainted
 task: ffff986f62f4b040 ti: ffff986f62fa2000 task.ti: ffff986f62fa2000
 RIP: 0010:[<ffffffff8409cc0d>]  [<ffffffff8409cc0d>] __tcp_select_window+0x8d/0x160
 Call Trace:
  <IRQ>
  [<ffffffff8409d951>] tcp_transmit_skb+0x11/0x20
  [<ffffffff8409da21>] tcp_xmit_probe_skb+0xc1/0xe0
  [<ffffffff840a0ee8>] tcp_write_wakeup+0x68/0x160
  [<ffffffff840a151b>] tcp_keepalive_timer+0x17b/0x230
  [<ffffffff83b3f799>] call_timer_fn+0x39/0xf0
  [<ffffffff83b40797>] run_timer_softirq+0x1d7/0x280
  [<ffffffff83a04ddb>] __do_softirq+0xcb/0x257
  [<ffffffff83ae03ac>] irq_exit+0x9c/0xb0
  [<ffffffff83a04c1a>] smp_apic_timer_interrupt+0x6a/0x80
  [<ffffffff83a03eaf>] apic_timer_interrupt+0x7f/0x90
  <EOI>
  [<ffffffff83fed2ea>] ? cpuidle_enter_state+0x13a/0x3b0
  [<ffffffff83fed2cd>] ? cpuidle_enter_state+0x11d/0x3b0

Tested:

Following packetdrill no longer crashes the kernel

`echo 0 >/proc/sys/net/ipv4/tcp_timestamps`

// Cache warmup: send a Fast Open cookie request
    0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
   +0 setsockopt(3, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0
   +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation is now in progress)
   +0 > S 0:0(0) <mss 1460,nop,nop,sackOK,nop,wscale 8,FO,nop,nop>
 +.01 < S. 123:123(0) ack 1 win 14600 <mss 1460,nop,nop,sackOK,nop,wscale 6,FO abcd1234,nop,nop>
   +0 > . 1:1(0) ack 1
   +0 close(3) = 0
   +0 > F. 1:1(0) ack 1
   +0 < F. 1:1(0) ack 2 win 92
   +0 > .  2:2(0) ack 2

   +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4
   +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
   +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0
   +0 setsockopt(4, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0
 +.01 connect(4, ..., ...) = 0
   +0 setsockopt(4, SOL_TCP, TCP_KEEPIDLE, [5], 4) = 0
   +10 close(4) = 0

`echo 1 >/proc/sys/net/ipv4/tcp_timestamps`

Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - fix TT sync flag inconsistency problems, which can lead to excess packets,
   by Linus Luessing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If the sender switches the congestion control during ECN-triggered
cwnd-reduction state (CA_CWR), upon exiting recovery cwnd is set to
the ssthresh value calculated by the previous congestion control. If
the previous congestion control is BBR that always keep ssthresh
to TCP_INIFINITE_SSTHRESH, cwnd ends up being infinite. The safe
step is to avoid assigning invalid ssthresh value when recovery ends.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SCRQ resources are freed during renegotiation, but they are not
re-allocated afterwards due to some changes in the initialization
process. Fix that by re-allocating the memory after renegotation.

SCRQ's can also be freed if a server capabilities request fails.
If this were encountered during a device reset for example,
SCRQ's may not be re-allocated. This operation is not necessary
anymore so remove it.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc fixes

This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.

Patch 1 by Inbar fixes a wrong ethtool indication for Wake-on-LAN.
The other 3 patches by Jack add a missing capability description,
and fixes the off-by-1 misalignment for the following capabilities
descriptions.

Series generated against net commit:
cc75f851 samples/bpf: fix bpf tunnel cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit introduced the following new enum value in file
include/linux/mlx4/device.h:

    QUERY_DEV_CAP_DIAG_RPRT_PER_PORT

However, it failed to introduce a corresponding entry in function
dump_dev_cap_flags2() for outputting a line in the message log
when this capability bit is set.

The change here fixes that omission.

Fixes: c7c122ed ("net/mlx4: Add diagnostic counters capability bit")
Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit introduced the following new enum value in file
include/linux/mlx4/device.h:

    MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP

However the value of MLX4_DEV_CAP_FLAG2_SVLAN_BY_QP needs to stay
consistent with the value used in another namespace in
function dump_dev_cap_flags2(), which is manually kept in sync.
The change here restores that consistency.

Fixes: 7c3d21c8 ("net/mlx4_core: Preparation for VF vlan protocol 802.1ad")
Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The index value in function dump_dev_cap_flags2() for outputting
"sl to vl mapping table change event support" needs to be
consistent with the value of the enumerated constant
MLX4_DEV_CAP_FLAG2_SL_TO_VL_CHANGE_EVENT defined in file
include/linux/mlx4_device.h

The change here restores that consistency.

Fixes: fd10ed8e ("IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets")
Reported-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when WoL is supported but disabled, ethtool reports:
"Supports Wake-on: d".
Fix the indication of Wol support, so that the indication
remains "g" all the time if the NIC supports WoL.

Tested:
As accepted, when NIC supports WoL- ethtool reports:
	Supports Wake-on: g
	Wake-on: d
when NIC doesn't support WoL- ethtool reports:
        Supports Wake-on: d
        Wake-on: d

Fixes: 14c07b13 ("mlx4: Wake on LAN support")
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nisar Sayed says:

====================
lan78xx: Fixes to lan78xx driver

This series of patches are for lan78xx driver.

These patches fixes potential issues associated with lan78xx driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to handle hard_header_len update

When ifconfig up/down sequence is initiated hard_header_len
get updated incrementally for each ifconfig up /down sequence,
this leads invalid hard_header_len, moving to lan78xx_bind
to have one time update of hard_header_len addresses the issue.
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

USB fast connect/disconnect crash fix

When USB plugged/unplugged at fast rate,
lan78xx_mdio_init() in lan78xx_bind() failing case is not handled.
Whenever  lan78xx_mdio_init() failed, dev->mdiobus will be freed, however
since lan78xx_bind() not consider as error and try to proceed for
further initialization in lan78xx_probe() which leads system hung/crash.
Also when register_netdev() failed, netdev is freed without calling lan78xx_unbind().
Hence halting the failed cases right manner fixes the system crash/hung issue.
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
drivers: net: Fix 64-bit statistics seqcount init

This patch series fixes a bunch of drivers to have their 64-bit statistics
seqcount cookie be initialized correctly. Most of these drivers (except b44,
gtp) are probably used on 64-bit only hosts and so the lockdep splat might have
never been seen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that by using the proper helper function: netdev_alloc_pcpu_stats().

Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that. In commit 6c80f3fc ("netvsc: report per-channel stats in
ethtool statistics") netdev_alloc_pcpu_stats() was removed in favor of
open-coding the 64-bits statistics, except that u64_stats_init() was
missed.

Fixes: 6c80f3fc ("netvsc: report per-channel stats in ethtool statistics")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that by using netdev_alloc_pcpu_stats() instead of an open coded
allocation.

Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that.

Fixes: 4c352362 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that.

Fixes: 4197aa7b ("ixgbevf: provide 64 bit statistics")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that.

Fixes: 980e9b11 ("i40e: Add support for 64 bit netstats")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that.

Fixes: eeda8585 ("b44: add 64 bit stats")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case that GRO is turned on and the original received packet is
CHECKSUM_PARTIAL, if the outer UDP header is exactly at the last
csum-unnecessary point, which for instance could occur if the packet
comes from another Linux guest on the same Linux host, we have to do
either remcsum_adjust or set up CHECKSUM_PARTIAL again with its
csum_start properly reset considering RCO.

However, since b7fe10e5 ("gro: Fix remcsum offload to deal with frags
in GRO") that barrier in such case could be skipped if GRO turned on,
hence we pass over it and the inner L4 validation mistakenly reckons
it as a bad csum.

This patch makes remcsum_offload being reset at the same time of GRO
remcsum cleanup, so as to make it work in such case as before.

Fixes: b7fe10e5 ("gro: Fix remcsum offload to deal with frags in GRO")
Signed-off-by: Koichiro Den <den@klaipeden.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case that GRO is turned on and the original received packet is
CHECKSUM_PARTIAL, if the outer UDP header is exactly at the last
csum-unnecessary point, which for instance could occur if the packet
comes from another Linux guest on the same Linux host, we have to do
either remcsum_adjust or set up CHECKSUM_PARTIAL again with its
csum_start properly reset considering RCO.

However, since b7fe10e5("gro: Fix remcsum offload to deal with frags
in GRO") that barrier in such case could be skipped if GRO turned on,
hence we pass over it and the inner L4 validation mistakenly reckons
it as a bad csum.

This patch makes remcsum_offload being reset at the same time of GRO
remcsum cleanup, so as to make it work in such case as before.

Fixes: b7fe10e5 ("gro: Fix remcsum offload to deal with frags in GRO")
Signed-off-by: Koichiro Den <den@klaipeden.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in for(),if((optlen > 0) && (optptr[1] == 0)), enter infinite loop.

Test: receive a packet which the ip length > 20 and the first byte of ip option is 0, produce this issue
Signed-off-by: yujuan.qi <yujuan.qi@mediatek.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Grygorii Strashko says:

====================
net: ethernet: ti: cpts: fix tx timestamping timeout

With the low Ethernet connection speed cpdma notification about packet
processing can be received before CPTS TX timestamp event, which is set
when packet actually left CPSW while cpdma notification is sent when packet
pushed in CPSW fifo. As result, when connection is slow and CPU is fast
enough TX timestamping is not working properly.
Issue was discovered using timestamping tool on am57x boards with Ethernet link
speed forced to 100M and on am335x-evm with Ethernet link speed forced to 10M.

Patch3 - This series fixes it by introducing TX SKB queue to store PTP SKBs for
which Ethernet Transmit Event hasn't been received yet and then re-check this
queue with new Ethernet Transmit Events by scheduling CPTS overflow
work more often until TX SKB queue is not empty.

Patch 1,2 - As CPTS overflow work is time critical task it important to ensure
that its scheduling is not delayed. Unfortunately, There could be significant
delay in CPTS work schedule under high system load and on -RT which could cause
CPTS misbehavior due to internal counter overflow and there is no way to tune
CPTS overflow work execution policy and priority manually. The kthread_worker
can be used instead of workqueues, as it creates separate named kthread for
each worker and its its execution policy and priority can be configured
using chrt tool. Instead of modifying CPTS driver itself it was proposed to
it was proposed to add PTP auxiliary worker to the PHC subsystem [1], so
other drivers can benefit from this feature also.

[1] https://www.spinics.net/lists/netdev/msg445392.html

changes in v4:
- fixed memleak in ptp_clock_register()
- undocumented change in cpts_find_ts() moved to separate patch (minor fix)

changes in v3:
- patch 1: added proper error handling in ptp_clock_register.
  minor comments applied.

changes in v2:
- added PTP auxiliary worker to the PHC subsystem

Links
v3: https://www.spinics.net/lists/netdev/msg446058.html
v2: https://www.spinics.net/lists/netdev/msg445859.html
v1: https://www.spinics.net/lists/netdev/msg445387.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now the call chain
 cpts_find_ts()
  |- cpts_fifo_read(cpts, CPTS_EV_PUSH)

will stop reading CPTS FIFO if PUSH event is found. But this is not
expected and CPTS FIFI should be completely drained here. This is most
probably copy-paste error and it has no negative impact as CPTS_EV_PUSH
should not be present in FIFO without TS_PUSH request and
cpts_systim_read() and cpts_find_ts() synchronized by spin_lock.

Correct above by calling cpts_fifo_read() with -1 parameter, so it will
read all CPTS event from FIFO.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the low speed Ethernet connection CPDMA notification about packet
processing can be received before CPTS TX timestamp event, which is set
when packet actually left CPSW while cpdma notification is sent when packet
pushed in CPSW fifo.  As result, when connection is slow and CPU is fast
enough TX timestamping is not working properly.

Fix it, by introducing TX SKB queue to store PTP SKBs for which Ethernet
Transmit Event hasn't been received yet and then re-check this queue
with new Ethernet Transmit Events by scheduling CPTS overflow
work more often (every 1 jiffies) until TX SKB queue is not empty.

Side effect of this change is:
 - User space tools require to take into account possible delay in TX
timestamp processing (for example ptp4l works with tx_timestamp_timeout=400
under net traffic and tx_timestamp_timeout=25 in idle).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There could be significant delay in CPTS work schedule under high system
load and on -RT which could cause CPTS misbehavior due to internal counter
overflow. Usage of own kthread_worker allows to avoid such kind of issues
and makes it possible to tune priority of CPTS kthread_worker thread on -RT
(thread name "cpts").

Hence, the CPTS driver is converted to use PTP auxiliary worker as PHC
subsystem implements such functionality in a generic way now.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many PTP drivers required to perform some asynchronous or periodic work,
like periodically handling PHC counter overflow or handle delayed timestamp
for RX/TX network packets. In most of the cases, such work is implemented
using workqueues. Unfortunately, Kernel workqueues might introduce
significant delay in work scheduling under high system load and on -RT,
which could cause misbehavior of PTP drivers due to internal counter
overflow, for example, and there is no way to tune its execution policy and
priority manuallly.

Hence, The kthread_worker can be used insted of workqueues, as it create
separte named kthread for each worker and its its execution policy and
priority can be configured using chrt tool.

This prblem was reported for two drivers TI CPSW CPTS and dp83640, so
instead of modifying each of these driver it was proposed to add PTP
auxiliary worker to the PHC subsystem.

The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker
and kthread_delayed_work and introduces two new PHC subsystem APIs:

- long (*do_aux_work)(struct ptp_clock_info *ptp) callback in
ptp_clock_info structure, which driver should assign if it require to
perform asynchronous or periodic work. Driver should return the delay of
the PTP next auxiliary work scheduling time (>=0) or negative value in case
further scheduling is not required.

- int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which
allows schedule PTP auxiliary work.

The name of kthread_worker thread corresponds PTP PHC device name "ptp%d".
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Handle notifier registry failures properly in tun/tap driver, from
    Tonghao Zhang.

 2) Fix bpf verifier handling of subtraction bounds and add a testcase
    for this, from Edward Cree.

 3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.

 4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
    from Cong Wang.

 5) Fix SElinux regression due to recent UDP optimizations, from Paolo
    Abeni.

 6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
    paths, fix from Stefano Brivio.

 7) Fix some mem leaks in dccp, from Xin Long.

 8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
    Bergmann.

 9) Mac address length check and buffer size fixes from Cong Wang.

10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.

11) Fix return value when copy_from_user() fails in
    bpf_prog_get_info_by_fd(), from Daniel Borkmann.

12) Handle PHY_HALTED properly in phy library state machine, from
    Florian Fainelli.

13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.

14) Fix truesize calculation in virtio_net which led to performance
    regressions, from Michael S Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  samples/bpf: fix bpf tunnel cleanup
  udp6: fix jumbogram reception
  ppp: Fix a scheduling-while-atomic bug in del_chan
  Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
  virtio_net: fix truesize for mergeable buffers
  mv643xx_eth: fix of_irq_to_resource() error check
  MAINTAINERS: Add more files to the PHY LIBRARY section
  ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
  net: phy: Correctly process PHY_HALTED in phy_stop_machine()
  sunhme: fix up GREG_STAT and GREG_IMASK register offsets
  bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
  tcp: avoid bogus gcc-7 array-bounds warning
  net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
  bpf: don't indicate success when copy_from_user fails
  udp6: fix socket leak on early demux
  net: thunderx: Fix BGX transmit stall due to underflow
  Revert "vhost: cache used event for better performance"
  team: use a larger struct for mac address
  net: check dev->addr_len for dev_set_mac_address()
  phy: bcm-ns-usb3: fix MDIO_BUS dependency
  ...

test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the
next geneve tunnelling test case fails.  In addition, the geneve reserved bit
in tcbpf2_kern.c should be zero, according to the RFC.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>