- 15 Sep, 2012 32 commits
-
-
Ezequiel García authored
Since ifnum is not used anywhere it is safe to remove it. This was spotted by Hans's media_tree daily build. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ezequiel García authored
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Ezequiel García authored
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
-
Ezequiel García authored
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Ezequiel García authored
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
Ezequiel García authored
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Cc: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
Ezequiel García authored
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Signed-off-by:
-
Ezequiel García authored
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Signed-off-by:
-
Ezequiel García authored
struct vb2_queue is allocated through kzalloc as part of a larger struct, there's no need to clear it. Signed-off-by:
-
Ezequiel García authored
struct vb2_queue is allocated through kzalloc as part of a larger struct, there's no need to clear it. Signed-off-by:
-
Antti Palosaari authored
Convert drivers: au6610, ce6230, ec168, rtl28xxu for dvb_usb_dbg_usb_control_msg() macro. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
For dumping usb_control_msg(). Signed-off-by:
-
Antti Palosaari authored
After qt1010 change that device seems to survive from reset resume. Signed-off-by:
-
Shaik Ameer Basha authored
This patch adds the Makefile for G-Scaler driver. Signed-off-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sungchun Kang authored
This patch adds the memory to memory (m2m) interface functionality for the G-Scaler driver. [mchehab@redhat.com: Fixed a small coding style issue: sizeof *ctx should be sizeof(*ctx)] Signed-off-by:
Hynwoong Kim <khw0178.kim@samsung.com> Signed-off-by:
Sungchun Kang <sungchun.kang@samsung.com> Signed-off-by:
-
Sungchun Kang authored
This patch adds the core functionality for the G-Scaler driver. Signed-off-by:
-
Sungchun Kang authored
This patch adds support for G-Scaler (Generic Scaler) device which is a new device for scaling and color space conversion on EXYNOS5 SoCs. This patch adds the code for register definitions and register operations. This device supports the followings as key feature. 1) Input image format - RGB888/565, YUV422 1P/2P, YUV420 2P/3P, TILE 2) Output image format - RGB888/565, YUV422 1P/2P, YUV420 2P/3P, YUV444 3) Input rotation - 0/90/180/270 degree, X/Y Flip 4) Scale ratio - 1/16 scale down to 8 scale up 5) CSC - RGB to YUV / YUV to RGB 6) Size - 2048 x 2048 for tile or rotation - 4800 x 3344 other case Signed-off-by:
-
Shaik Ameer Basha authored
This patch adds new 'YM21' fourcc definition for multiplanar YCrCb pixel format - V4L2_PIX_FMT_YVU420M. Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 3.6-rc5 * tag 'v3.6-rc5': (334 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ...
-
Antti Palosaari authored
Implementation taken from rtl2830. Cc: Thomas Mair <thomas.mair86@googlemail.com> Signed-off-by:
-
Antti Palosaari authored
Based rtl2830 implementation. Cc: Thomas Mair <thomas.mair86@googlemail.com> Signed-off-by:
-
Antti Palosaari authored
Copied from rtl2830. Cc: Thomas Mair <thomas.mair86@googlemail.com> Signed-off-by:
-
Antti Palosaari authored
This is workaround / partial fix. rtl2832u_power_ctrl() and rtl2832u_frontend_attach() needs to be go through carefully and fix properly. There is clearly some logical errors when handling power-management ang GPIOs... Signed-off-by:
-
Antti Palosaari authored
Stream did not start anymore after stream was stopped once. Following error can be seen, xhci_hcd WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. usb_clear_halt for streaming endpoint helps. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Old i2c message length splitting logic was faulty. Make it better. Signed-off-by:
-
Antti Palosaari authored
I didn't found easy way to handle register dump only when needed so remove it totally. It is quite useless and trivial function, every developer could write new one in few minutes when needed. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
It survives now on reset_resume. Signed-off-by:
-
Antti Palosaari authored
Changing cached frequency during init is something no-no. Make it behave a little bit better. After that device could survive from suspend/resume when streaming is ongoing. Signed-off-by:
-
Laurent Pinchart authored
The uvcvideo driver now supports USERPTR, and isn't limited to YUYV and MJPEG anymore. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Richard Zhao authored
Signed-off-by:
Richard Zhao <richard.zhao@freescale.com> Acked-by:
-
- 14 Sep, 2012 3 commits
-
-
Ben Hutchings authored
ite_dev::rdev is currently initialised in ite_probe() after rc_register_device() returns. If a newly registered device is opened quickly enough, we may enable interrupts and try to use ite_dev::rdev before it has been initialised. Move it up to the earliest point we can, right after calling rc_allocate_device(). Reported-and-tested-by:
YunQiang Su <wzssyqa@gmail.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by:
-
Julia Lawall authored
The result of one call to a function is tested, and then at the second call to the same function, the previous result, and not the current result, is tested again. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; identifier f; statement S1,S2; @@ *ret = f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S1 ... when any *f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S2 // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The result of one call to a function is tested, and then at the second call to the same function, the previous result, and not the current result, is tested again. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; identifier f; statement S1,S2; @@ *ret = f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S1 ... when any *f(...); if (\(ret != 0\|ret < 0\|ret == NULL\)) S2 // </smpl> Signed-off-by:
-
- 13 Sep, 2012 5 commits
-
-
Frank Schäfer authored
Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Frank Schäfer authored
[media] gspca_pac7302: avoid duplicate calls of the image quality adjustment functions on capturing start There is no need to call the image quality adjustment functions in sd_start. The gspca main driver calls v4l2_ctrl_handler_setup in gspca_init_transfer, which already applies all image control values. Signed-off-by:
-
Frank Schäfer authored
The current white balance temperature default value is 4, which is much too small (possible values are 0-255). Improve the picture quality by increasing the default value to 55, which is the default value used by the Windows driver. Signed-off-by:
-
Frank Schäfer authored
The Windows driver uses page 0 register 0xb6 for sharpness adjustment. Signed-off-by:
-
Frank Schäfer authored
Fix a regression from kernel 3.4 which has been introduced with the conversion of the gspca driver to the v4l2 control framework. Signed-off-by:
-
