- 01 Mar, 2013 24 commits
-
-
Alasdair G Kergon authored
Add a num_write_bios function to struct target. If an instance of a target sets this, it will be queried before the target's mapping function is called on a write bio, and the response controls the number of copies of the write bio that the target will receive. This provides a convenient way for a target to send the same data to more than one device. The new cache target uses this in writethrough mode, to send the data both to the cache and the backing device. Signed-off-by:Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
This patch allows the administrator to reduce the rate at which kcopyd issues I/O. Each module that uses kcopyd acquires a throttle parameter that can be set in /sys/module/*/parameters. We maintain a history of kcopyd usage by each module in the variables io_period and total_period in struct dm_kcopyd_throttle. The actual kcopyd activity is calculated as a percentage of time equal to "(100 * io_period / total_period)". This is compared with the user-defined throttle percentage threshold and if it is exceeded, we sleep. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
This patch introduces enhanced message support that allows the device-mapper core to recognise messages that are common to all devices, and for messages to return data to userspace. Core messages are processed by the function "message_for_md". If the device mapper doesn't support the message, it is passed to the target driver. If the message returns data, the kernel sets the flag DM_MESSAGE_OUT_FLAG. Signed-off-by:
-
Mikulas Patocka authored
Device-mapper ioctls receive and send data in a buffer supplied by userspace. The buffer has two parts. The first part contains a 'struct dm_ioctl' and has a fixed size. The second part depends on the ioctl and has a variable size. This patch recognises the specific ioctls that do not use the variable part of the buffer and skips allocating memory for it. In particular, when a device is suspended and a resume ioctl is sent, this now avoid memory allocation completely. The variable "struct dm_ioctl tmp" is moved from the function copy_params to its caller ctl_ioctl and renamed to param_kernel. It is used directly when the ioctl function doesn't need any arguments. Signed-off-by:
-
Mikulas Patocka authored
This patch introduces flags for each ioctl function. So far, one flag is defined, IOCTL_FLAGS_NO_PARAMS. It is set if the function processing the ioctl doesn't take or produce any parameters in the section of the data buffer that has a variable size. Signed-off-by:
-
Jun'ichi Nomura authored
This patch merges io_pool and tio_pool into io_pool and cleans up related functions. Though device-mapper used to have 2 pools of objects for each dm device, the use of bioset frontbad for per-bio data has shrunk the number of pools to 1 for both bio-based and request-based device types. (See c0820cf5 "dm: introduce per_bio_data" and 94818742 "dm: Use bioset's front_pad for dm_rq_clone_bio_info") So dm no longer has to maintain 2 different pointers. No functional changes. Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Jun'ichi Nomura authored
Remove _rq_bio_info_cache, which is no longer used. No functional changes. Signed-off-by:
-
Mike Christie authored
dm_calculate_queue_limits will first reset the provided limits to defaults using blk_set_stacking_limits; whereby defeating the purpose of retaining the original live table's limits -- as was intended via commit 3ae70656 ("dm: retain table limits when swapping to new table with no devices"). Fix this improper limits initialization (in the no data devices case) by avoiding the call to dm_calculate_queue_limits. [patch header revised by Mike Snitzer] Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.6+ Signed-off-by:
-
Mikulas Patocka authored
Add module aliases so that autoloading works correctly if the user tries to activate "snapshot-origin" or "snapshot-merge" targets. Reference: https://bugzilla.redhat.com/889973Reported-by:
Chao Yang <chyang@redhat.com> Signed-off-by:
-
Mike Snitzer authored
Mark some constant parameters constant in some dm-btree functions. Signed-off-by:
-
Alasdair G Kergon authored
Refactor part of the bio splitting and cloning code to try to make it easier to understand. Signed-off-by: -
Alasdair G Kergon authored
Rename functions involved in splitting and cloning bios. The sequence of functions is now: (1) __split_and_process* - entry point that selects the processing strategy (2) __send* - prepare the details for each bio needed and loop through them (3) __clone_and_map* - creates a clone and maps it Signed-off-by: -
Alasdair G Kergon authored
Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: -
Alasdair G Kergon authored
Remove the no-longer-used struct bio_set argument from clone_bio and split_bvec. Use tio->ti in __map_bio() instead of passing in ti. Factor out some code for setting up cloned bios. Take target_request_nr as a parameter to alloc_tio(). Signed-off-by:
-
Kees Cook authored
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Alasdair G Kergon authored
Remove EXPERIMENTAL from all existing device-mapper targets. Signed-off-by: -
Mike Snitzer authored
Use block_size_is_power_of_two() rather than checking sectors_per_block_shift directly. Also introduce local pool variable in get_bio_block() to eliminate redundant tc->pool dereferences. No functional change. Signed-off-by:
-
Mikulas Patocka authored
Use WRITE_FLUSH instead of REQ_FLUSH for submitted requests to make it consistent with the rest of the kernel. There is no functional change. Signed-off-by:
-
Wang Sheng-Hui authored
If allocation fails, the local var *t is not used any more after kfree. Don't need to reset it to NULL. Remove the unnecesary NULL set here. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
-
Mike Snitzer authored
Support a non-power-of-2 discard granularity in dm-thin, now that the block layer supports this(via 8dd2cb7e "block: discard granularity might not be power of 2" and 59771079 "blk: avoid divide-by-zero with zero discard granularity"). Signed-off-by:
-
Mikulas Patocka authored
Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by:
-
Jun'ichi Nomura authored
This patch fixes a regression introduced in v3.8, which causes oops like this when dm-multipath is used: general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffff810fe754>] [<ffffffff810fe754>] mempool_free+0x24/0xb0 Call Trace: <IRQ> [<ffffffff81187417>] bio_put+0x97/0xc0 [<ffffffffa02247a5>] end_clone_bio+0x35/0x90 [dm_mod] [<ffffffff81185efd>] bio_endio+0x1d/0x30 [<ffffffff811f03a3>] req_bio_endio.isra.51+0xa3/0xe0 [<ffffffff811f2f68>] blk_update_request+0x118/0x520 [<ffffffff811f3397>] blk_update_bidi_request+0x27/0xa0 [<ffffffff811f343c>] blk_end_bidi_request+0x2c/0x80 [<ffffffff811f34d0>] blk_end_request+0x10/0x20 [<ffffffffa000b32b>] scsi_io_completion+0xfb/0x6c0 [scsi_mod] [<ffffffffa000107d>] scsi_finish_command+0xbd/0x120 [scsi_mod] [<ffffffffa000b12f>] scsi_softirq_done+0x13f/0x160 [scsi_mod] [<ffffffff811f9fd0>] blk_done_softirq+0x80/0xa0 [<ffffffff81044551>] __do_softirq+0xf1/0x250 [<ffffffff8142ee8c>] call_softirq+0x1c/0x30 [<ffffffff8100420d>] do_softirq+0x8d/0xc0 [<ffffffff81044885>] irq_exit+0xd5/0xe0 [<ffffffff8142f3e3>] do_IRQ+0x63/0xe0 [<ffffffff814257af>] common_interrupt+0x6f/0x6f <EOI> [<ffffffffa021737c>] srp_queuecommand+0x8c/0xcb0 [ib_srp] [<ffffffffa0002f18>] scsi_dispatch_cmd+0x148/0x310 [scsi_mod] [<ffffffffa000a38e>] scsi_request_fn+0x31e/0x520 [scsi_mod] [<ffffffff811f1e57>] __blk_run_queue+0x37/0x50 [<ffffffff811f1f69>] blk_delay_work+0x29/0x40 [<ffffffff81059003>] process_one_work+0x1c3/0x5c0 [<ffffffff8105b22e>] worker_thread+0x15e/0x440 [<ffffffff8106164b>] kthread+0xdb/0xe0 [<ffffffff8142db9c>] ret_from_fork+0x7c/0xb0 The regression was introduced by the change c0820cf5 "dm: introduce per_bio_data", where dm started to replace bioset during table replacement. For bio-based dm, it is good because clone bios do not exist during the table replacement. For request-based dm, however, (not-yet-mapped) clone bios may stay in request queue and survive during the table replacement. So freeing the old bioset could cause the oops in bio_put(). Since the size of front_pad may change only with bio-based dm, it is not necessary to replace bioset for request-based dm. Reported-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd changes from J Bruce Fields: "Miscellaneous bugfixes, plus: - An overhaul of the DRC cache by Jeff Layton. The main effect is just to make it larger. This decreases the chances of intermittent errors especially in the UDP case. But we'll need to watch for any reports of performance regressions. - Containerized nfsd: with some limitations, we now support per-container nfs-service, thanks to extensive work from Stanislav Kinsbursky over the last year." Some notes about conflicts, since there were *two* non-data semantic conflicts here: - idr_remove_all() had been added by a memory leak fix, but has since become deprecated since idr_destroy() does it for us now. - xs_local_connect() had been added by this branch to make AF_LOCAL connections be synchronous, but in the meantime Trond had changed the calling convention in order to avoid a RCU dereference. There were a couple of more obvious actual source-level conflicts due to the hlist traversal changes and one just due to code changes next to each other, but those were trivial. * 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits) SUNRPC: make AF_LOCAL connect synchronous nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum svcrpc: fix rpc server shutdown races svcrpc: make svc_age_temp_xprts enqueue under sv_lock lockd: nlmclnt_reclaim(): avoid stack overflow nfsd: enable NFSv4 state in containers nfsd: disable usermode helper client tracker in container nfsd: use proper net while reading "exports" file nfsd: containerize NFSd filesystem nfsd: fix comments on nfsd_cache_lookup SUNRPC: move cache_detail->cache_request callback call to cache_read() SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function SUNRPC: rework cache upcall logic SUNRPC: introduce cache_detail->cache_request callback NFS: simplify and clean cache library NFS: use SUNRPC cache creation and destruction helper for DNS cache nfsd4: free_stid can be static nfsd: keep a checksum of the first 256 bytes of request sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer sunrpc: fix comment in struct xdr_buf definition ... -
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph updates from Sage Weil: "A few groups of patches here. Alex has been hard at work improving the RBD code, layout groundwork for understanding the new formats and doing layering. Most of the infrastructure is now in place for the final bits that will come with the next window. There are a few changes to the data layout. Jim Schutt's patch fixes some non-ideal CRUSH behavior, and a set of patches from me updates the client to speak a newer version of the protocol and implement an improved hashing strategy across storage nodes (when the server side supports it too). A pair of patches from Sam Lang fix the atomicity of open+create operations. Several patches from Yan, Zheng fix various mds/client issues that turned up during multi-mds torture tests. A final set of patches expose file layouts via virtual xattrs, and allow the policies to be set on directories via xattrs as well (avoiding the awkward ioctl interface and providing a consistent interface for both kernel mount and ceph-fuse users)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits) libceph: add support for HASHPSPOOL pool flag libceph: update osd request/reply encoding libceph: calculate placement based on the internal data types ceph: update support for PGID64, PGPOOL3, OSDENC protocol features ceph: update "ceph_features.h" libceph: decode into cpu-native ceph_pg type libceph: rename ceph_pg -> ceph_pg_v1 rbd: pass length, not op for osd completions rbd: move rbd_osd_trivial_callback() libceph: use a do..while loop in con_work() libceph: use a flag to indicate a fault has occurred libceph: separate non-locked fault handling libceph: encapsulate connection backoff libceph: eliminate sparse warnings ceph: eliminate sparse warnings in fs code rbd: eliminate sparse warnings libceph: define connection flag helpers rbd: normalize dout() calls rbd: barriers are hard rbd: ignore zero-length requests ...
-
- 28 Feb, 2013 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds authored
Pull writeback fixes from Wu Fengguang: "Two writeback fixes - fix negative (setpoint - dirty) in 32bit archs - use down_read_trylock() in writeback_inodes_sb(_nr)_if_idle()" * tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: Negative (setpoint-dirty) in bdi_position_ratio() vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename them
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver bits from Jens Axboe: "After the block IO core bits are in, please grab the driver updates from below as well. It contains: - Fix ancient regression in dac960. Nobody must be using that anymore... - Some good fixes from Guo Ghao for loop, fixing both potential oopses and deadlocks. - Improve mtip32xx for NUMA systems, by being a bit more clever in distributing work. - Add IBM RamSan 70/80 driver. A second round of fixes for that is pending, that will come in through for-linus during the 3.9 cycle as per usual. - A few xen-blk{back,front} fixes from Konrad and Roger. - Other minor fixes and improvements." * 'for-3.9/drivers' of git://git.kernel.dk/linux-block: loopdev: ignore negative offset when calculate loop device size loopdev: remove an user triggerable oops loopdev: move common code into loop_figure_size() loopdev: update block device size in loop_set_status() loopdev: fix a deadlock xen-blkback: use balloon pages for persistent grants xen-blkfront: drop the use of llist_for_each_entry_safe xen/blkback: Don't trust the handle from the frontend. xen-blkback: do not leak mode property block: IBM RamSan 70/80 driver fixes rsxx: add slab.h include to dma.c drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency block: remove new __devinit/exit annotations on ramsam driver block: IBM RamSan 70/80 device driver drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static? drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static? dac960: return success instead of -ENOTTY mtip32xx: add trim support mtip32xx: Add workqueue and NUMA support block: delete super ancient PC-XT driver for 1980's hardware -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block IO core bits from Jens Axboe: "Below are the core block IO bits for 3.9. It was delayed a few days since my workstation kept crashing every 2-8h after pulling it into current -git, but turns out it is a bug in the new pstate code (divide by zero, will report separately). In any case, it contains: - The big cfq/blkcg update from Tejun and and Vivek. - Additional block and writeback tracepoints from Tejun. - Improvement of the should sort (based on queues) logic in the plug flushing. - _io() variants of the wait_for_completion() interface, using io_schedule() instead of schedule() to contribute to io wait properly. - Various little fixes. You'll get two trivial merge conflicts, which should be easy enough to fix up" Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d: "hlist: drop the node parameter from iterators"). * 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits) block: remove redundant check to bd_openers() block: use i_size_write() in bd_set_size() cfq: fix lock imbalance with failed allocations drivers/block/swim3.c: fix null pointer dereference block: don't select PERCPU_RWSEM block: account iowait time when waiting for completion of IO request sched: add wait_for_completion_io[_timeout] writeback: add more tracepoints block: add block_{touch|dirty}_buffer tracepoint buffer: make touch_buffer() an exported function block: add @req to bio_{front|back}_merge tracepoints block: add missing block_bio_complete() tracepoint block: Remove should_sort judgement when flush blk_plug block,elevator: use new hashtable implementation cfq-iosched: add hierarchical cfq_group statistics cfq-iosched: collect stats from dead cfqgs cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats() blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock block: RCU free request_queue blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull first round of SCSI updates from James Bottomley: "The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a few bug fixes" Pull delayed because google hates James, and sneakily considers his pull requests spam. Why, google, why? * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits) [SCSI] aacraid: 1024 max outstanding command support for Series 7 and above [SCSI] bnx2fc: adjust duplicate test [SCSI] qla4xxx: Update driver version to 5.03.00-k4 [SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param. [SCSI] qla4xxx: wait for boot target login response during probe. [SCSI] qla4xxx: Added support for force firmware dump [SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter [SCSI] qla4xxx: Throttle active IOCBs to firmware limits [SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data [SCSI] qla4xxx: Quiesce driver activities while loopback [SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION [SCSI] qla4xxx: Add spurious interrupt messages under debug level 2 [SCSI] cxgb4i: Remove the scsi host device when removing device [SCSI] bfa: fix strncpy() limiter in bfad_start_ops() [SCSI] qla4xxx: Update driver version to 5.03.00-k3 [SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox [SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct [SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release [SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get. [SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count ...
-
J. Bruce Fields authored
It doesn't appear that anyone actually needs to connect asynchronously. Also, using a workqueue for the connect means we lose the namespace information from the original process. This is a problem since there's no way to explicitly pass in a filesystem namespace for resolution of an AF_LOCAL address. Acked-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
Linus Torvalds authored
Merge third patch-bumb from Andrew Morton: "This wraps me up for -rc1. - Lots of misc stuff and things which were deferred/missed from patchbombings 1 & 2. - ocfs2 things - lib/scatterlist - hfsplus - fatfs - documentation - signals - procfs - lockdep - coredump - seqfile core - kexec - Tejun's large IDR tree reworkings - ipmi - partitions - nbd - random() things - kfifo - tools/testing/selftests updates - Sasha's large and pointless hlist cleanup" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (163 commits) hlist: drop the node parameter from iterators kcmp: make it depend on CHECKPOINT_RESTORE selftests: add a simple doc tools/testing/selftests/Makefile: rearrange targets selftests/efivarfs: add create-read test selftests/efivarfs: add empty file creation test selftests: add tests for efivarfs kfifo: fix kfifo_alloc() and kfifo_init() kfifo: move kfifo.c from kernel/ to lib/ arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS w1: add support for DS2413 Dual Channel Addressable Switch memstick: move the dereference below the NULL test drivers/pps/clients/pps-gpio.c: use devm_kzalloc Documentation/DMA-API-HOWTO.txt: fix typo include/linux/eventfd.h: fix incorrect filename is a comment mtd: mtd_stresstest: use prandom_bytes() mtd: mtd_subpagetest: convert to use prandom library mtd: mtd_speedtest: use prandom_bytes mtd: mtd_pagetest: convert to use prandom library mtd: mtd_oobtest: convert to use prandom library ... -
Sasha Levin authored
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by:Peter Senna Tschudin <peter.senna@gmail.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Cyrill Gorcunov authored
Since kcmp syscall has been implemented (initially on x86 architecture) a number of other archs wire it up as well: xtensa, sparc, sh, s390, mips, microblaze, m68k (not taking into account those who uses <asm-generic/unistd.h> for syscall numbers definitions). But the Makefile, which turns kcmp.o generation on still depends on former config-x86. Thus get rid of this limitation and make kcmp.o depend on CHECKPOINT_RESTORE option. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Jeremy Kerr authored
This change adds a little documentation to the tests under tools/testing/selftests/, based on akpm's explanation. [akpm@linux-foundation.org: move from Documentation to tools/testing/selftests/README.txt] Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
-
Andrew Morton authored
Do it one-per-line to reduce patch conflict pain. Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
-
Jeremy Kerr authored
Test that reads from a newly-created efivarfs file (with no data written) will return EOF. Signed-off-by:
-
Jeremy Kerr authored
Signed-off-by:
-
Jeremy Kerr authored
This change adds a few initial efivarfs tests to the tools/testing/selftests directory. The open-unlink test is based on code from Lingzhu Xiang. Signed-off-by:
-
Stefani Seibold authored
Fix kfifo_alloc() and kfifo_init() to alloc at least the requested number of elements. Since the kfifo operates on power of 2 the request size will be rounded up to the next power of two. Signed-off-by:
Stefani Seibold <stefani@seibold.net> Signed-off-by:
-
Stefani Seibold authored
Move kfifo.c from kernel/ to lib/ Signed-off-by:
-
Stephen Rothwell authored
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
