This patch adds support for virtual IOMMU to the vmxnet3 module.  We
switch to DMA consistent mappings for anything we pass to the device.
There were a few places where we already did this, but using pci_blah();
these have been fixed to use dma_blah(), along with all new occurrences
where we've replaced kmalloc() and friends.

Also fix two small bugs:
1) use after free of rq->buf_info in vmxnet3_rq_destroy()
2) a cpu_to_le32() that should have been a cpu_to_le64()
Acked-by: George Zhang <georgezhang@vmware.com>
Acked-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Andy King <acking@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support is provided only for combined channels. When SR-IOV is not
enabled, BE3 supports upto 16 channels and Lancer-R/SH-R support upto
32 channels.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Move be_cmd_if_create() above queue create routines to allow
   TXQ creation (that requires if_handle) to be clubbed with TX-CQ creation.
2) Consolidate all queue create routines into be_setup_queues()
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the IF_CREATE FW cmd is issued only *after* MCCQ is created as
it was coded to only use MCCQ. By fixing this, cmd_if_create() can be
called before MCCQ is created and the same routine for VF provisioning
can be called after.
This allows for consolidating all the queue create routines by moving
the be_cmd_if_create() call above all queue create calls in be_setup().
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) use be_resources{} struct to query/store HW resource limits
2) The HW queue/resource limits for BE2/BE3 chips are mostly called out
   in driver as constants.  Code to handle this is scattered across various
   places in be_setup(). Consolidate this code into BEx_get_resources().
   For Lancer-R, Skyhawk-R, these limits are queried from FW.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) Parse PCIe descriptor for max-VFs supported by HW
2) Cleanup NIC descriptor parsing in get_func/profile_config() routines
3) Use common struct definitions for v0 and v1 versions of GET_FUNC_CONFIG
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

EQ_CREATEv2 explicitly returns the msix-index associated with a EQ.
For SH-R this is needed if EQs need to be deleted and re-created without
resetting a function.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the tcp_probe snooper can either filter packets by a given
port (handed to the module via module parameter e.g. port=80) or lets
all TCP traffic pass (port=0, default). When a port is specified, the
port number is tested against the sk's source/destination port. Thus,
if one of them matches, the information will be further processed for
the log.

As this is quite limited, allow for more advanced filtering possibilities
which can facilitate debugging/analysis with the help of the tcp_probe
snooper. Therefore, similarly as added to BPF machine in commit 7e75f93e
("pkt_sched: ingress socket filter by mark"), add the possibility to
use skb->mark as a filter.

If the mark is not being used otherwise, this allows ingress filtering
by flow (e.g. in order to track updates from only a single flow, or a
subset of all flows for a given port) and other things such as dynamic
logging and reconfiguration without removing/re-inserting the tcp_probe
module, etc. Simple example:

  insmod net/ipv4/tcp_probe.ko fwmark=8888 full=1
  ...
  iptables -A INPUT -i eth4 -t mangle -p tcp --dport 22 \
           --sport 60952 -j MARK --set-mark 8888
  [... sampling interval ...]
  iptables -D INPUT -i eth4 -t mangle -p tcp --dport 22 \
           --sport 60952 -j MARK --set-mark 8888

The current option to filter by a given port is still being preserved. A
similar approach could be done for the sctp_probe module as a follow-up.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Adapter and driver supports only CEE dcbnl ops. Only GET callbacks
  within dcbnl ops are supported currently.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Adapter sends Asynchronous Event Notifications to the driver when
  there are changes in the switch or adapter DCBX configuration.
  AEN handler updates the driver DCBX parameters.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Populate driver data structures with local, operational, and peer
  DCB parameters.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Query adapter DCB capabilities and  populate local data structures
  with relevant information.

o Add QLCNIC_DCB to Kconfig for enabling/disabling DCB.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
1. Refactoring and cleanup in preparation for new hardware support.
2. Some bug fixes for firmware completion handling.  (They're not known
to cause real problems, otherwise I'd be submitting these for net and
stable.)
3. Update to the firmware protocol (MCDI) definitions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/wireless/iwlwifi/pcie/trans.c
	include/linux/inetdevice.h

The inetdevice.h conflict involves moving the IPV4_DEVCONF values
into a UAPI header, overlapping additions of some new entries.

The iwlwifi conflict is a context overlap.
Signed-off-by: David S. Miller <davem@davemloft.net>

Boris BREZILLON says:

====================
net/cadence/macb: add support for dt phy definition

This patch series adds support for ethernet phy definition using device
tree.

This may help in moving some at91 boards to dt (some of them define an
interrupt pin).

Tested on samad31ek.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch describe the phy used on atmel sama5d3 mother board:
 - phy address
 - phy interrupt pin
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The macb driver only handle PHY description through platform_data
(macb_platform_data).
Thus, when using dt you cannot define phy properties like phy address or
phy irq pin.

This patch makes use of the of_mdiobus_register to add support for
phy device definition using dt.
A fallback to the autoscan procedure is added in case there is no phy
devices defined in dt.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says that my previous fix for an ERR_PTR dereference
(ea857f28 'ipip: dereferencing an ERR_PTR in ip_tunnel_init_net()')
could be racy and suggests the following fix instead.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return a negative error code in the add bond vlan ids error
handling case instead of 0, as done elsewhere in this function.

Introduced by commit 1ff412ad.
(bonding: change the bond's vlan syncing functions with the standard ones)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge SFC driver changes from Ben Hutchings.
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge networking fixes from David Miller:

 1) Revert Johannes Berg's genetlink locking fix, because it causes
    regressions.

    Johannes and Pravin Shelar are working on fixing things properly.

 2) Do not drop ipv6 ICMP messages without a redirected header option,
    they are legal.  From Duan Jiong.

 3) Missing error return propagation in probing of via-ircc driver.
    From Alexey Khoroshilov.

 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when
    initializing, from Peter Wu.

 5) realtek phy driver programs wrong interrupt status bit, from
    Giuseppe CAVALLARO.

 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn.

 7) Bridge code uses wrong bitmap length, from Toshiaki Makita.

 8) SFC driver uses wrong indexes to look up MAC filters, from Ben
    Hutchings.

 9) Don't pass stack buffers into usb control operations in hso driver,
    from Daniel Gimpelevich.

10) Multiple ipv6 fragmentation headers in one packet is illegal and
    such packets should be dropped, from Hannes Frederic Sowa.

11) When TCP sockets are "repaired" as part of checkpoint/restart, the
    timestamp field of SKBs need to be refreshed otherwise RTOs can be
    wildly off.  From Andrey Vagin.

12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in
    hostp driver.  From Dan Carpenter.

13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes
    it does.  From Dan Carpenter.

14) Fix regression in wireless SME disconnects, from Johannes Berg.

15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from
    Jussi Kivilinna.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  ipv4: expose IPV4_DEVCONF
  ipv6: handle Redirect ICMP Message with no Redirected Header option
  be2net: fix disabling TX in be_close()
  Revert "genetlink: fix family dump race"
  hso: Fix stack corruption on some architectures
  hso: Earlier catch of error condition
  sfc: Fix lookup of default RX MAC filters when steered using ethtool
  bridge: Use the correct bit length for bitmap functions in the VLAN code
  packet: restore packet statistics tp_packets to include drops
  net: phy: rtl8211: fix interrupt on status link change
  r8169: remember WOL preferences on driver load
  via-ircc: don't return zero if via_ircc_open() failed
  macvtap: Ignore tap features when VNET_HDR is off
  macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
  macvtap: simplify usage of tap_features
  tcp: set timestamps for restored skb-s
  bnx2x: set VF DMAE when first function has 0 supported VFs
  bnx2x: Protect against VFs' ndos when SR-IOV is disabled
  bnx2x: prevent VF benign attentions
  bnx2x: Consider DCBX remote error
  ...

Merge fixes from Andrew Morton:
 "A few fixes.  One is a licensing change and I don't do licensing, so
  please eyeball that one"

Licensing eye-balled.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/lz4: correct the LZ4 license
  memcg: get rid of swapaccount leftovers
  nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
  nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
  drivers/platform/olpc/olpc-ec.c: initialise earlier

The LZ4 code is listed as using the "BSD 2-Clause License".
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Acked-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Chanho Min <chanho.min@lge.com>
Cc: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ The 2-clause BSD can be just converted into GPL, but that's rude and
  pointless, so don't do it   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The swapaccount kernel parameter without any values has been removed by
commit a2c8990a ("memsw: remove noswapaccount kernel parameter") but
it seems that we didn't get rid of all the left overs.

Make sure that menuconfig help text and kernel-parameters.txt are clear
about value for the paramter and remove the stalled comment which is not
very much useful on its own.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Gergely Risko <gergely@risko.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Being a low-level component, various drivers (e.g.  olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe.  Therefore the OLPC EC driver must be initialised before other
drivers try to use it.  This was the case until it was recently moved
out of arch/x86 and restructured around commits ac250415 ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86:
OLPC: switch over to using new EC driver on x86").

Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.

Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC.  The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Paul Fox <pgf@laptop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

make the Freescale ethernet driver get, prepare and enable the FEC clock
during probe(); disable and unprepare the clock upon remove(), put is
done by the devm approach; hold a reference to the clock over the period
of use.

clock lookup is non-fatal as not all platforms provide clock specs in
their device tree; failure to enable specified clocks is fatal.
Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 720a43ef
(drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb)
there is a build warning:

drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c: In function 'tx_skb_align_workaround':
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c:586:26: warning: unused variable 'fep'

Fix it.
Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can simply use the %pISc format specifier that was recently added
and thus remove some code that distinguishes between IPv4 and IPv6.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
another pull-request for net-next. It consists of two patches by Libo
Chen, the at91 and flexcan driver make use of platform_set_drvdata()
rather than open coding it. Chen Gang improves the error checking in
the c_can_platform driver's probe function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is needed when the cpsw driver is built as module.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IP sends device configuration (see inet_fill_link_af) as an array
in the netlink information, but the indices in that array are not
exposed to userspace through any current santized header file.

It was available back in 2.6.32 (in /usr/include/linux/sysctl.h)
but was broken by:
  commit 02291680
  Author: Eric W. Biederman <ebiederm@xmission.com>
  Date:   Sun Feb 14 03:25:51 2010 +0000

    net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers

Eric was solving the sysctl problem but then the indices were re-exposed
by a later addition of devconf support for IPV4

  commit 9f0f7272
  Author: Thomas Graf <tgraf@infradead.org>
  Date:   Tue Nov 16 04:32:48 2010 +0000

    ipv4: AF_INET link address family

Putting them in /usr/include/linux/ip.h seemed the logical match
for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rfc 4861 says the Redirected Header option is optional, so
the kernel should not drop the Redirect Message that has no
Redirected Header option. In this patch, the function
ip6_redirect_no_header() is introduced to deal with that
condition.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>

commit fba87559 ("disable TX in be_close()") disabled TX in be_close()
to protect be_xmit() from touching freed up queues in the AER recovery
flow.  But, TX must be disabled *before* cleaning up TX completions in
the close() path, not after. This allows be_tx_compl_clean() to free up
all TX-req skbs that were notified to the HW.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tcp_probe currently only supports analysis of IPv4 connections.
Therefore, it would be nice to have IPv6 supported as well. Since we
have the recently added %pISpc specifier that is IPv4/IPv6 generic,
build related sockaddress structures from the flow information and
pass this to our format string. Tested with SSH and HTTP sessions
on IPv4 and IPv6.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patches fixes a rather unproblematic function signature mismatch
as the const specifier was missing for the th variable; and next to
that it adds a build-time assertion so that future function signature
mismatches for kprobes will not end badly, similarly as commit 22222997
("net: sctp: add build check for sctp_sf_eat_sack_6_2/jsctp_sf_eat_sack")
did it for SCTP.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is helpful to sometimes know the TCP window sizes of an established
socket e.g. to confirm that window scaling is working or to tweak the
window size to improve high-latency connections, etc etc. Currently the
TCP snooper only exports the send window size, but not the receive window
size. Therefore, also add the receive window size to the end of the
output line.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
1) Some constifications, from Mathias Krause.

2) Catch bugs if a hold timer is still active when xfrm_policy_destroy()
   is called, from Fan Du.

3) Remove a redundant address family checking, from Fan Du.

4) Make xfrm_state timer monotonic to be independent of system clock changes,
   from Fan Du.

5) Remove an outdated comment on returning -EREMOTE in the xfrm_lookup(),
   from Rami Rosen.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>