- 13 Nov, 2018 40 commits
-
-
Chao Yu authored
[ Upstream commit 19c73a69 ] Testcase to reproduce this bug: 1. mkfs.f2fs /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr +A /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr /mnt/f2fs/file -----------------N- /mnt/f2fs/file But actually, we expect the corrct result is: -------A---------N- /mnt/f2fs/file The reason is we didn't recover inode.i_flags field during mount, fix it. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chao Yu authored
[ Upstream commit 5cd1f387 ] Testcase to reproduce this bug: 1. mkfs.f2fs -O extra_attr -O inode_crtime /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. xfs_io -f /mnt/f2fs/file -c "fsync" 5. godown /mnt/f2fs 6. umount /mnt/f2fs 7. mount -t f2fs /dev/sdd /mnt/f2fs 8. xfs_io -f /mnt/f2fs/file -c "statx -r" stat.btime.tv_sec = 0 stat.btime.tv_nsec = 0 This patch fixes to recover inode creation time fields during mount. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 710bc78f ] This patch prevents user space mailbox request from doing chip reset if the mailbox timed out. The chip reset is only reserved for the DPC thread to ensure all mailbox requests are flushed properly. The DPC thread is responsible for the flushing all MBs and chip reset. Fixes: b2000805 ("scsi: qla2xxx: Flush mailbox commands on chip reset") Cc: <stable@ger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Anshuman Gupta authored
[ Upstream commit 330e2d61 ] When USB bus host controller root hub resumes from autosuspend, it immediately tries to enter auto-suspend, but there can be a scenario when root hub is resuming its usb2 ports, in that particular case USB host controller auto suspend fails since it is busy to resuming its usb2 ports. This makes multiple failed cycles of auto-suspend until all usb2 ports of host controller root hub do not resume. This patch uses USB core framework usb_hcd_start_port_resume, usb_hcd_end_port_resume API's in order to autoresume/autosuspend root hub properly. Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit fa72d847 ] This function can fail so check its return value in nvmem_register() and act accordingly. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Alan Douglas authored
[ Upstream commit aa77e55d ] Test the correct value to see whether the PHY get failed. Use devm_phy_get() instead of devm_phy_optional_get(), since it is only called if phy name is given in devicetree and so should exist. If failure when getting or linking PHY, put any PHYs which were already got and unlink them. Fixes: dfb80534 ("PCI: cadence: Add generic PHY support to host and EP drivers") Reported-by:
Colin King <colin.king@canonical.com> Signed-off-by:
Alan Douglas <adouglas@cadence.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit d595567d ] If we change the number of array's device after device is removed from array, then add the device back to array, we can see that device is added as active role instead of spare which we expected. Please see the below link for details: https://marc.info/?l=linux-raid&m=153736982015076&w=2 This is caused by that we prefer to use device's previous role which is recorded by saved_raid_disk, but we should respect the new number of conf->raid_disks since it could be changed after device is removed. Reported-by:
Gioh Kim <gi-oh.kim@profitbricks.com> Tested-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Theodore Ts'o authored
[ Upstream commit f18b2b83 ] If the starting block number of either the source or destination file exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL. Also fixed the helper function mext_check_coverage() so that if the logical block is beyond EOF, make it return immediately, instead of looping until the block number wraps all the away around. This takes long enough that if there are multiple threads trying to do pound on an the same inode doing non-sensical things, it can end up triggering the kernel's soft lockup detector. Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit bb80e4fa ] The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has its own compatible string. Add support for that. Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible") Acked-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Fabrice Gasnier authored
[ Upstream commit 41ee1ea2 ] There's a race with root hub resume, when using external vbus supply. Root hub gets resumed, but runtime pm autosuspend runs as external vbus supply isn't enabled. So, host never exit from power down properly. Initialize vbus external supply before, rater that after hub resume. Fixes: 531ef5eb ("usb: dwc2: add support for host mode external vbus supply") Tested-by:
Artur Petrosyan <arturp@synopsys.com> Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by:
-
Fabrice Gasnier authored
[ Upstream commit 5aa678c7 ] dwc2_vbus_supply_exit() may call regulator_disable(). It shouldn't be called with interrupts disabled as it might sleep. This is seen with DEBUG_ATOMIC_SLEEP=y. Fixes: 531ef5eb ("usb: dwc2: add support for host mode external vbus supply") Tested-by:
-
Lina Iyer authored
[ Upstream commit 7bae48b2 ] The PDC irqchp can convert a falling edge or level low interrupt to a rising edge or level high interrupt at the GIC. We just need to setup the GIC correctly. Set up the interrupt type for the IRQ_TYPE_EDGE_BOTH as IRQ_TYPE_EDGE_RISING at the GIC. Fixes: f55c73ae ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs") Reported-by:
Evan Green <evgreen@chromium.org> Reviewed-by:
Lina Iyer <ilina@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit ef739b21 ] On a fresh connection, an RPC/RDMA client is supposed to send only one RPC Call until it gets a credit grant in the first RPC Reply from the server [RFC 8166, Section 3.3.3]. There is a bug in the Linux client's credit accounting mechanism introduced by commit e7ce710a ("xprtrdma: Avoid deadlock when credit window is reset"). On connect, it simply dumps all pending RPC Calls onto the new connection. Servers have been tolerant of this bad behavior. Currently no server implementation ever changes its credit grant over reconnects, and servers always repost enough Receives before connections are fully established. To correct this issue, ensure that the client resets both the credit grant _and_ the congestion window when handling a reconnect. Fixes: e7ce710a ("xprtrdma: Avoid deadlock when credit ... ") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 6299cf9e ] We enable power management automatically for bridges where pci_bridge_d3_possible() returns true. However, these bridges may have ACPI methods such as _DSW that need to be called before D3 entry. For example in Lenovo Thinkpad X1 Carbon 6th _DSW method is used to prepare D3cold for the PCIe root port hosting Thunderbolt chain. Because wake is not enabled _DSW method is never called and the port does not enter D3cold properly consuming more power than necessary. Users can work this around by writing "enabled" to "wakeup" sysfs file under the device in question but that is not something an ordinary user is expected to do. Since we already automatically enable power management for PCIe ports with ->bridge_d3 set extend that to enable wake for them as well, assuming the port has any ACPI wakeup related objects implemented in the namespace (adev->wakeup.flags.valid is true). This ensures the necessary ACPI methods get called at appropriate times and allows the root port in Thinkpad X1 Carbon 6th to go into D3cold. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jorgen Hansen authored
[ Upstream commit 11924ba5 ] When adding a VMCI resource, the check for an existing entry would ignore that the new entry could be a wildcard. This could result in multiple resource entries that would match a given handle. One disastrous outcome of this is that the refcounting used to ensure that delayed callbacks for VMCI datagrams have run before the datagram is destroyed can be wrong, since the refcount could be increased on the duplicate entry. This in turn leads to a use after free bug. This issue was discovered by Hangbin Liu using KASAN and syzkaller. Fixes: bc63dedb ("VMCI: resource object implementation") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Signed-off-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Dexuan Cui authored
[ Upstream commit 25355252 ] A cpumask structure on the stack can cause a warning with CONFIG_NR_CPUS=8192 (e.g. Ubuntu 16.04 and 18.04 use this): drivers/hv//channel_mgmt.c: In function ‘init_vp_index’: drivers/hv//channel_mgmt.c:702:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] Nowadays it looks most distros enable CONFIG_CPUMASK_OFFSTACK=y, and hence we can work around the warning by using cpumask_var_t. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Jaegeuk Kim authored
[ Upstream commit fb7d70db ] When running fault injection test, I hit somewhat wrong behavior in f2fs_gc -> gc_data_segment(): 0. fault injection generated some PageError'ed pages 1. gc_data_segment -> f2fs_get_read_data_page(REQ_RAHEAD) 2. move_data_page -> f2fs_get_lock_data_page() -> f2f_get_read_data_page() -> f2fs_submit_page_read() -> submit_bio(READ) -> return EIO due to PageError -> fail to move data Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit 0d6d0d62 ] For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Adam Thomson authored
[ Upstream commit 554fab6d ] Currently when requesting a specific voltage or current through the psy interface, for PPS, when reading back from that interface the values will always be the same as previously given, if the request was successful. However PPS only allows for 20mV voltage steps and 50mA current steps, and the psy class expects microvolt and micro amp requests, so inbetween values can be provided through this interface. Really when reading back the true values negotiated should be given, and not the ones originally asked for. To report the actual values negotiated with the Source, the values stored are now rounded down to the relevant step units prior to building the PPS request, so that those values are later correctly reported through the psy interface. In addition this improves the adjustments made to meet the operating power requirements of the platform, which previously could have been slightly out due to not using valid PPS units of voltage and current. Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alan Douglas authored
[ Upstream commit 0652d4b6 ] The IRQ physical address is allocated from region 0, rather than the highest region. Update the driver to reserve this region in the bitmap and to use region 0 for all types of interrupt. This corrects a problem which prevents the interrupt being signalled correctly if using the first address in the AXI region, since an offset of zero will always be mapped to region 0. Fixes: 37dddf14 ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller") Signed-off-by:
-
Honghui Zhang authored
[ Upstream commit 074d6f32 ] The Mediatek's host controller has two slots, each with its own control registers. The host driver needs to identify what slot is connected to what port in order to access the device's configuration space. Current code retrieving slot connected to a given endpoint device. Assuming each slot is connected to one endpoint device as below: host bridge bus 0 --> __________|_______ | | | | slot 0 slot 1 bus 1 -->| bus 2 --> | | | EP 0 EP 1 During PCI enumeration, system software will scan all the PCI devices on every bus starting from devfn 0. Using PCI_SLOT(devfn) for matching an endpoint to its slot is erroneous in that the devfn does not contain the hierarchical bus numbering in it. In order to match an endpoint with its slot (and related port), the PCI tree must be walked up to the root bus (where the root ports are situated) and then the PCI_SLOT(devfn) matching logic can be correctly applied for matching. This patch fixes the mtk_pcie_find_port() slot matching logic by adding appropriate PCI tree walking code to retrieve the slot/port a given endpoint is connected to. Signed-off-by:
Honghui Zhang <honghui.zhang@mediatek.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Tudor.Ambarus@microchip.com authored
[ Upstream commit 325b9313 ] atmel,oc-gpio is optional. Request its irq only when atmel,oc is set in device tree. devm_gpiod_get_index_optional returns NULL if -ENOENT. Check its return value for NULL before error, because it is more probable that atmel,oc is not set. This fixes the following errors on boards where atmel,oc is not set in device tree: [ 0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ [ 0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ [ 0.970000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Selvin Xavier authored
[ Upstream commit d455f29f ] Fix possible recursive lock warning. Its a false warning as the locks are part of two differnt HW Queue data structure - cmdq and creq. Debug kernel is throwing the following warning and stack trace. [ 783.914967] ============================================ [ 783.914970] WARNING: possible recursive locking detected [ 783.914973] 4.19.0-rc2+ #33 Not tainted [ 783.914976] -------------------------------------------- [ 783.914979] swapper/2/0 is trying to acquire lock: [ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.914999] but task is already holding lock: [ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915013] other info that might help us debug this: [ 783.915016] Possible unsafe locking scenario: [ 783.915019] CPU0 [ 783.915021] ---- [ 783.915034] lock(&(&hwq->lock)->rlock); [ 783.915035] lock(&(&hwq->lock)->rlock); [ 783.915037] *** DEADLOCK *** [ 783.915038] May be due to missing lock nesting notation [ 783.915039] 1 lock held by swapper/2/0: [ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915044] stack backtrace: [ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33 [ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 783.915048] Call Trace: [ 783.915049] <IRQ> [ 783.915054] dump_stack+0x90/0xe3 [ 783.915058] __lock_acquire+0x106c/0x1080 [ 783.915061] ? sched_clock+0x5/0x10 [ 783.915063] lock_acquire+0xbd/0x1a0 [ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90 [ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0 [ 783.915081] __do_softirq+0xcb/0x3a6 [ 783.915084] irq_exit+0xe9/0x100 [ 783.915085] do_IRQ+0x6a/0x120 [ 783.915087] common_interrupt+0xf/0xf [ 783.915088] </IRQ> Use nested notation for the spin_lock to avoid this warning. Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Selvin Xavier authored
[ Upstream commit ed51efd2 ] In the failure path, nq->bar_reg_iomem gets accessed without initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the initialization is complete. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b103 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by:
-
Denis Drozdov authored
[ Upstream commit 4d6e4d12 ] IPCB should be cleared before icmp_send, since it may contain data from previous layers and the data could be misinterpreted as ip header options, which later caused the ihl to be set to an invalid value and resulted in the following stack corruption: [ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping [ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping [ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping [ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping [ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034387] ================================================================== [ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310 [ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7 [ 1083.034990] [ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1 [ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib] [ 1083.035750] Call Trace: [ 1083.035888] dump_stack+0x9a/0xeb [ 1083.036031] print_address_description+0xe3/0x2e0 [ 1083.036213] kasan_report+0x18a/0x2e0 [ 1083.036356] ? __ip_options_echo+0xf08/0x1310 [ 1083.036522] __ip_options_echo+0xf08/0x1310 [ 1083.036688] icmp_send+0x7b9/0x1cd0 [ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070 [ 1083.037018] ? netif_schedule_queue+0x5/0x200 [ 1083.037180] ? debug_show_all_locks+0x310/0x310 [ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120 [ 1083.037519] ? debug_locks_off+0x11/0x80 [ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6 [ 1083.037841] ? check_flags.part.27+0x450/0x450 [ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6 [ 1083.038169] ? debug_locks_off+0x11/0x80 [ 1083.038318] ? skb_dequeue+0x10e/0x1a0 [ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib] [ 1083.038642] ? netif_schedule_queue+0xa8/0x200 [ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.039174] process_one_work+0x912/0x1830 [ 1083.039336] ? wq_pool_ids_show+0x310/0x310 [ 1083.039491] ? lock_acquire+0x145/0x3a0 [ 1083.042312] worker_thread+0x87/0xbb0 [ 1083.045099] ? process_one_work+0x1830/0x1830 [ 1083.047865] kthread+0x322/0x3e0 [ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 1083.053354] ret_from_fork+0x3a/0x50 For instance __ip_options_echo is failing to proceed with invalid srr and optlen passed from another layer via IPCB [ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0 [ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533 [ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84 [ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0 [ 762.140269] ================================================================== [ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0 [ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680 [ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7 Signed-off-by:
Denis Drozdov <denisd@mellanox.com> Reviewed-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit e54b6a3b ] Add missing check for failure of cm_init_av_by_path Fixes: e1444b5a ("IB/cm: Fix automatic path migration support") Reported-by:
Slava Shwartsman <slavash@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 0f6ef65d ] If the provider driver (such as rdma_rxe) doesn't support pma counters, avoid exposing its directory similar to optional hw_counters directory. If core fails to read the PMA counter, return an error so that user can retry later if needed. Fixes: 35c4cbb1 ("IB/core: Create get_perf_mad function in sysfs.c") Reported-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 47db7873 ] In megasas_mgmt_compat_ioctl_fw(), to handle the structure compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket 'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle the packet. Since the two data structures have different fields, the data is copied from 'cioc' to 'ioc' field by field. In the copy process, 'sense_ptr' is prepared if the field 'sense_len' is not null, because it will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and saved to kernel-space variables 'local_sense_off' and 'user_sense_off' respectively. Given that 'ioc->sense_off' is also copied from 'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the same value. However, 'cioc' is in the user space and a malicious user can race to change the value of 'cioc->sense_off' after it is copied to 'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing so, the attacker can inject different values into 'local_sense_off' and 'user_sense_off'. This can cause undefined behavior in the following execution, because the two variables are supposed to be same. This patch enforces a check on the two kernel variables 'local_sense_off' and 'user_sense_off' to make sure they are the same after the copy. In case they are not, an error code EINVAL will be returned. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Jim Mattson authored
[ Upstream commit cfb634fe ] According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit qualification field for debug exceptions are reserved (cleared to 0). However, the SDM is incorrect about bit 16 (corresponding to DR6.RTM). This bit should be set if a debug exception (#DB) or a breakpoint exception (#BP) occurred inside an RTM region while advanced debugging of RTM transactional regions was enabled. Note that this is the opposite of DR6.RTM, which "indicates (when clear) that a debug exception (#DB) or breakpoint exception (#BP) occurred inside an RTM region while advanced debugging of RTM transactional regions was enabled." There is still an issue with stale DR6 bits potentially being misreported for the current debug exception. DR6 should not have been modified before vectoring the #DB exception, and the "new DR6 bits" should be available somewhere, but it was and they aren't. Fixes: b96fb439 ("KVM: nVMX: fixes to nested virt interrupt injection") Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 9607871f ] The following code in the linux/ndctl header file: static inline const char *nvdimm_bus_cmd_name(unsigned cmd) { static const char * const names[] = { [ND_CMD_ARS_CAP] = "ars_cap", [ND_CMD_ARS_START] = "ars_start", [ND_CMD_ARS_STATUS] = "ars_status", [ND_CMD_CLEAR_ERROR] = "clear_error", [ND_CMD_CALL] = "cmd_call", }; if (cmd < ARRAY_SIZE(names) && names[cmd]) return names[cmd]; return "unknown"; } is broken in a number of ways: (1) ARRAY_SIZE() is not generally defined. (2) g++ does not support "non-trivial" array initialisers fully yet. (3) Every file that calls this function will acquire a copy of names[]. The same goes for nvdimm_cmd_name(). Fix all three by converting to a switch statement where each case returns a string. That way if cmd is a constant, the compiler can trivially reduce it and, if not, the compiler can use a shared lookup table if it thinks that is more efficient. A better way would be to remove these functions and their arrays from the header entirely. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Evan Green authored
[ Upstream commit f4bb7704 ] With commit 10e5e375 ("scsi: ufs: Add clock ungating to a separate workqueue"), clock gating work was moved to a separate work queue with WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim context. Unfortunately, clk_gating.gate_work was left queued via schedule_delayed_work, which is a system workqueue that does not have WQ_MEM_RECLAIM set. Because ufshcd_ungate_work attempts to cancel gate_work, the following warning appears: [ 14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work [ 14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118 [ 14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1 [ 14.212437] Hardware name: Google Cheza (rev1) (DT) [ 14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work [ 14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000 [ 14.229195] PC is at check_flush_dependency+0x110/0x118 [ 14.234569] LR is at check_flush_dependency+0x110/0x118 [ 14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9 [ 14.333050] Call trace: [ 14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118 [ 14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc [ 14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94 [ 14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8 [ 14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30 [ 14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0 [ 14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690 [ 14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338 [ 14.475361] [<ffffff80080d527c>] kthread+0x120/0x130 [ 14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18 The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM work queue as the ungate_work. Fixes: 10e5e375 ("scsi: ufs: Add clock ungating to a separate workqueue") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Finn Thain authored
[ Upstream commit fd47d919 ] If a target disconnects during a PIO data transfer the command may fail when the target reconnects: scsi host1: DMA length is zero! scsi host1: cur adr[04380000] len[00000000] The scsi bus is then reset. This happens because the residual reached zero before the transfer was completed. The usual residual calculation relies on the Transfer Count registers. That works for DMA transfers but not for PIO transfers. Fix the problem by storing the PIO transfer residual and using that to correctly calculate bytes_sent. Fixes: 6fe07aaf ("[SCSI] m68k: new mac_esp scsi driver") Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Rob Herring authored
[ Upstream commit 173ee396 ] Commit f42b0e18 ("of: add node name compare helper functions") failed to add the module exports to of_node_name_eq() and of_node_name_prefix(). Add them now. Fixes: f42b0e18 ("of: add node name compare helper functions") Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jack Wang authored
[ Upstream commit 6aaa58c9 ] I noticed kmemleak report memory leak when run create/stop md in a loop, backtrace: [<000000001ca975e7>] mempool_create_node+0x86/0xd0 [<0000000095576bcd>] md_run+0x1057/0x1410 [md_mod] [<000000007b45c5fc>] do_md_run+0x15/0x130 [md_mod] [<000000001ede9ec0>] md_ioctl+0x1f49/0x25d0 [md_mod] [<000000004142cacf>] blkdev_ioctl+0x680/0xd00 The root cause is we alloc mddev->flush_pool and mddev->flush_bio_pool in md_run, but from do_md_stop will not call into md_stop but __md_stop, move the mempool_destroy to __md_stop fixes the problem for me. The bug was introduced in 5a409b4f, the fixes should go to 4.18+ Fixes: 5a409b4f ("MD: fix lock contention for flush bios") Signed-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
-
Xiao Ni authored
[ Upstream commit af9b926d ] flush_pool is leaked when flush bio size is zero Fixes: 5a409b4f ("MD: fix lock contention for flush bios") Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 78efac53 ] Now, we have supported cgroup writeback, it depends on correctly IO account of specified filesystem. But in commit d1b3e72d ("f2fs: submit bio of in-place-update pages"), we split write paths from f2fs_submit_page_mbio() to two: - f2fs_submit_page_bio() for IPU path - f2fs_submit_page_bio() for OPU path But still we account write IO only in f2fs_submit_page_mbio(), result in incorrect IO account, fix it by adding missing IO account in IPU path. Fixes: d1b3e72d ("f2fs: submit bio of in-place-update pages") Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ac63043d ] Use the new of_get_compatible_child() helper to lookup the mdio-internal child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the mdio-mux node). Fortunately, this was inadvertently balanced by a failure to drop the mdio-mux reference after lookup. While at it, also fix the related mdio-internal- and phy-node reference leaks. Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Tested-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Michal Hocko authored
[ Upstream commit a90e90b7 ] We have seen a customer complaining about soft lockups on !PREEMPT kernel config with 4.4 based kernel [1072141.435366] NMI watchdog: BUG: soft lockup - CPU#21 stuck for 22s! [systemd:1] [1072141.444090] Modules linked in: mpt3sas raid_class binfmt_misc af_packet 8021q garp mrp stp llc xfs libcrc32c bonding iscsi_ibft iscsi_boot_sysfs msr ext4 crc16 jbd2 mbcache cdc_ether usbnet mii joydev hid_generic usbhid intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif mgag200 i2c_algo_bit ttm ipmi_devintf drbg ixgbe drm_kms_helper vxlan ansi_cprng ip6_udp_tunnel drm aesni_intel udp_tunnel aes_x86_64 iTCO_wdt syscopyarea ptp xhci_pci lrw iTCO_vendor_support pps_core gf128mul ehci_pci glue_helper sysfillrect mdio pcspkr sb_edac ablk_helper cryptd ehci_hcd sysimgblt xhci_hcd fb_sys_fops edac_core mei_me lpc_ich ses usbcore enclosure dca mfd_core ipmi_si mei i2c_i801 scsi_transport_sas usb_common ipmi_msghandler shpchp fjes wmi processor button acpi_pad btrfs xor raid6_pq sd_mod crc32c_intel megaraid_sas sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod md_mod autofs4 [1072141.444146] Supported: Yes [1072141.444149] CPU: 21 PID: 1 Comm: systemd Not tainted 4.4.121-92.80-default #1 [1072141.444150] Hardware name: LENOVO Lenovo System x3650 M5 -[5462P4U]- -[5462P4U]-/01GR451, BIOS -[TCE136H-2.70]- 06/13/2018 [1072141.444151] task: ffff880191bd0040 ti: ffff880191bd4000 task.ti: ffff880191bd4000 [1072141.444153] RIP: 0010:[<ffffffff815229f9>] [<ffffffff815229f9>] update_classid_sock+0x29/0x40 [1072141.444157] RSP: 0018:ffff880191bd7d58 EFLAGS: 00000286 [1072141.444158] RAX: ffff883b177cb7c0 RBX: 0000000000000000 RCX: 0000000000000000 [1072141.444159] RDX: 00000000000009c7 RSI: ffff880191bd7d5c RDI: ffff8822e29bb200 [1072141.444160] RBP: ffff883a72230980 R08: 0000000000000101 R09: 0000000000000000 [1072141.444161] R10: 0000000000000008 R11: f000000000000000 R12: ffffffff815229d0 [1072141.444162] R13: 0000000000000000 R14: ffff881fd0a47ac0 R15: ffff880191bd7f28 [1072141.444163] FS: 00007f3e2f1eb8c0(0000) GS:ffff882000340000(0000) knlGS:0000000000000000 [1072141.444164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1072141.444165] CR2: 00007f3e2f200000 CR3: 0000001ffea4e000 CR4: 00000000001606f0 [1072141.444166] Stack: [1072141.444166] ffffffa800000246 00000000000009c7 ffffffff8121d583 ffff8818312a05c0 [1072141.444168] ffff8818312a1100 ffff880197c3b280 ffff881861422858 ffffffffffffffea [1072141.444170] ffffffff81522b1c ffffffff81d0ca20 ffff8817fa17b950 ffff883fdd8121e0 [1072141.444171] Call Trace: [1072141.444179] [<ffffffff8121d583>] iterate_fd+0x53/0x80 [1072141.444182] [<ffffffff81522b1c>] write_classid+0x4c/0x80 [1072141.444187] [<ffffffff8111328b>] cgroup_file_write+0x9b/0x100 [1072141.444193] [<ffffffff81278bcb>] kernfs_fop_write+0x11b/0x150 [1072141.444198] [<ffffffff81201566>] __vfs_write+0x26/0x100 [1072141.444201] [<ffffffff81201bed>] vfs_write+0x9d/0x190 [1072141.444203] [<ffffffff812028c2>] SyS_write+0x42/0xa0 [1072141.444207] [<ffffffff815f58c3>] entry_SYSCALL_64_fastpath+0x1e/0xca [1072141.445490] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xca If a cgroup has many tasks with many open file descriptors then we would end up in a large loop without any rescheduling point throught the operation. Add cond_resched once per task. Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit cb5c2e63 ] When processing the mids for compounds we would only add credits based on the last successful mid in the compound which would leak credits and eventually triggering a re-connect. Fix this by splitting the mid processing part into two loops instead of one where the first loop just waits for all mids and then counts how many credits we were granted for the whole compound. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 760eea43 ] The workqueue used for monitoring the hardware may run while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 51e20d0e ("thermal: Prevent polling from happening during system suspend"). Fixes: 608567aa ("thermal: da9062/61: Thermal junction temperature monitoring driver") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
