Patch from Ben Dooks

Ensure the watchdog timer is mapped for use with
the reboot code. Also fixes minor comment typo.

Signed-off-by: Dimitry Andric

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Mainter entries for ARM/S3C2410 and ARM/S3C2410 ARM
Architectures, mainted by Ben Dooks on behalf of
Simtec Electronics.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

When the page tables are wrapped from 4 levels to 2 levels, the new
MM code requires PMD_SHIFT to match PUD_SHIFT, which must also
match PGDIR_SHIFT.  If PMD_SHIFT is smaller than PUD_SHIFT, we risk
freeing a still-in-use table (== page) which can then get re-used
for the slab cache.

Testing and inspection shows that there isn't any real benefit from
keeping PMD_SHIFT set to 20.

In addition, add some comments concerning the granularity of
alloc_init_section() and fix a missing PMD assignment in the
rebooting code.  Somehow we managed to get away with that, although
it is actually wrong.  Maybe I've just been lucky until now.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Patch from Liam Girdwood

This patch allows the PXA SSP port configuration to be changed without
the need to close the port.

Signed-off-by: Liam Girdwood
Signed-off-by: Russell King

This changes kernel domains to use domain 0 rather than domain 1,
in preparation to supporting supersection mappings.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Patch from Liam Girdwood

This patch adds the PXA27x SSP port 3 configuration register space (Phys
0x41900000) to the kernel memory table.

Signed-off-by: Liam Girdwood
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Lennart Poettering

Trivial patch against Linux 2.6.10 which adds PNP support for a
certain kind of Rockwell 28.8/ISA modems.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Since all users of this have now been eliminated, we can eliminate
the element itself.  MMC host drivers now operate only on the
scatter lists passed to them, rather than needing knowledge of
block devices.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

From: Pierre Ossman

Cleanup that fixes a warning in the wbsd module.

noexec_setup runs too late to take any effect, so parse it earlier.
Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>

sclp: core driver cleanup

Details:
- moved signal shutdown (quiesce) handling into a separate file
- cleanup of SCLP core driver:
  . introduced driver states instead of bits
  . introduced request retry count and retry limit
  . sclp_add_request now returns an error code if a request couldn't be started
  . introduced separate request structure for init_mask requests to simplify
    code
  . request timer is now manually checked in sclp_sync_wait because timer
    interrupts are disabled in this context
  . removed busy timer - request timer now handles both cases
  . split up sclp_start_request into __sclp_start_request and sclp_process
    queue
  . removed sclp_error_message (unused)
  . introduced sclp_check_handler function to split up initial init mask
    test from standard init mask request processing
  . introduced sclp_deactivate and sclp_reactivate for simplified reboot
    event handling (and potential use in suspend/resume scenario)
  . added protection against multiple concurrent init mask calls
- minor changes in SCLP core driver:
  . updated comments
  . renamed functions to be consistent with "function name starts with __ =>
    needs lock"
  . renamed internal functions for consistency reasons
  . introduced inlined helper functions to simplify code
  . moved EXPORT_SYMBOL definitions next to function definition
- changes in sclp console driver
  . removed callback recursion to prevent stack overflow
- changes to CPI module
  . added check for sclp_add_request return code
  . changed printks to specify a message level
- changes to generic sclp tty layer
  . removed timed buffer retry after error (timers may not work in some
    situations)
  . introduced return code for sclp_emit_buffer
- changes to sclp tty driver
  . removed callback recursion
- changes to sclp vt220 driver
  . removed callback recursion
  . removed timed buffer retry after error
- modified sclp_init_mask to prevent problems with some compiler versions
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Carsten Otte <cotte@de.ibm.com>

 - Fix codingstyle.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
From: Stefan Bader <shbader@de.ibm.com>

character device driver changes:
 - tape: Correct module count usage.
 - 3270: Use mod_timer only when timer is pending.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>

dasd driver changes:
 - Modify format analysis routine to use block size provided by on-disk label.
 - Search data structures when referencing use_diag/ro attribute values.
 - Correct return code checking when allocating memory.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Ursula Braun-Krahl <braunu@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>
From: Thomas Spatzier <tspat@de.ibm.com>
From: Frank Pavlic <pavlic@de.ibm.com>

 - ctc: make sysfs attribute buffer early available.
 - ctc: remove memory leak for channel ccw struct.
 - qeth: remove redundant info card->info.ifname.
 - qeth: enable recovery with retries in qeth_hardsetup_card after unit check.
 - qeth: do not allow to set layer2 attribute on IQD devices.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Cornelia Huck <cohuck@de.ibm.com>

common i/o layer changes:

 - Cope with changed cdev->handler.
 - Split clearing of subchannels from reipl function and declare it in header.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

s390 core changes:
 - Disable pfault pseudo page faults before stopping a cpu.
 - Add exception table for diag10 instruction.
 - Move initialization of active_mm of idle task to smp_create_idle.
 - Regenerate default configuration.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove the s390 version of setup_arg_pages32 function and use the generic
setup_arg_pages function instead.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add sysfs support to the uml network driver.  Also comment the eth_init
function, I think that one is never ever needed as the devices are initialized
when the underlying transport mechanism registeres.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixup initialization order when creating the $HOME/.uml/<umid> directory and
the files therein, also make the error messages more useful.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

export a missing symbol, IIRC xfs needs that one.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove a reference to an unused variable.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Before Bodo's signal fixes and my signal delivery rework, it was possible for
a process to execute UML code by running the default signal restorer.  This
is no longer possible, so this check can be removed from the sanity test for
UML accidentally tracing itself.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a declaration for ptrace_setfpregs
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This implements using the new ptrace option SYSEMU_SINGLESTEP in UML
(advanced sysemu) in SKAS and TT modes.
To have a fast selection of the appropriate ptrace option to use next,
a 2 dimensional arry is used and singlestepping() is modified to return
0,1 or 2:
    0 = don't do singlestepping
    1 = singlestep a syscall
    2 = singlestep a "non syscall" instruction

In do_syscall() writing of the syscall number is supressed, if the
advanced sysemu is in use (that does it itself).
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>

This implements checking for the new ptrace option SYSEMU_SINGLESTEP
(advanced sysemu) and allows the values 0,1,2 for /proc/sysemu,
if advanced sysemu is available:
   0 = don't use sysemu
   1 = use sysemu, but don't use advanced sysemu
   2 = use sysemu and advanced sysemu
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>

In call to update_process_times() set parameter user
correctly. (was from for SKAS).
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>

Restoring of current->blocked in sys_sigreturn is wrong.
The first (long ) of the mask correctly is fetched from sc->oldmask.
The further longs again come from there, but correctly should be
taken from frame->extramask.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>

Usage of SYSEMU in TT mode is modified, so that always the
same method is used in do_syscall as has been used before in
ptrace(PTRACE_SYSCALL/SYSEMU, ...)
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>

This patch fixes compilation on 2.4 hosts by not relying on macros from 2.6
host kernel headers in one userspace file. It's about AT_SYSINFO_* macros.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>

My older patch, that sets TIF_SIGPENDING after an ptrace-interception
in syscall_trace() is wrong.
Some syscalls want to be called without any signal pending. If a signal
is pending on syscall-entry, they immediately return with -ERESTARTNOINTR.
Thus, on return to user, the pending signals can be processed and the
kernel will lower eip by 2 to have the syscall restarted after that.
Since my change sets TIF_SIGPENDING on the entry and exit interception,
stracing such a syscall looped! Try "strace ls" to see what happens.
Fix: set TIF_SIGPENDING on the exit interception only. This avoids the
loop and is enough for security.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser

The implementation of sys_sigreturn() and sys_rt_sigreturn() in UML
must be changed.
This is necessary, since the return value of sys_*_sigreturn()
is the value of eax in the thread, that was interrupted by the
signal handler. If accidentaly eax contains -ERESTART_*, orig_eax
*must* be -1 to avoid syscall restart processing in kern_do_signal().
If orig_eax is >=0, eip might be lowered by 2, the process will fail.
In UML PT_REGS_SYSCALL_NR() or UPT_SYSCALL_NR() have to be used
instead of orig_eax.

While writing and testing an exploit for this, I saw that for most
interrupts, the syscall number is undefined. So even on a return from
interrupt a wrong syscall restart handling could happen.

And also: UML resumes a process with ptrace(PTRACE_SYSCALL/SYSEMU/SINGLESTEP
when a syscall in UML in SKAS mode has been processed. But since there
is a valid syscall number in the host's orig_eax, the host could do
a wrong syscall restarting if the syscall in UML was a sigreturn() returning
-ERESTART* To avoid this, in SKAS -1 should be written to regs.orig_eax
before restore_registers().
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Bodo Stroesser <bstroesser@fujitsu-siemens.com>

some modules need end_iomem to be exported.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>