- 01 Dec, 2019 40 commits
-
-
Victor Kamensky authored
[ Upstream commit 98356eb0 ] After 'a66649da arm64: fix vdso-offsets.h dependency' if one will try to build .i file in case of external kernel module, build fails complaining that prepare0 target is missing. This issue came up with SystemTap when it tries to build variety of .i files for its own generated kernel modules trying to figure given kernel features/capabilities. The issue is that prepare0 is defined in top level Makefile only if KBUILD_EXTMOD is not defined. .i file rule depends on prepare and in case KBUILD_EXTMOD defined top level Makefile contains empty rule for prepare. But after mentioned commit arch/arm64/Makefile would introduce dependency on prepare0 through its own prepare target. Fix it to put proper ifdef KBUILD_EXTMOD around code introduced by mentioned commit. It matches what top level Makefile does. Acked-by:
Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by:
Victor Kamensky <kamensky@cisco.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Keith Busch authored
[ Upstream commit 9fe5c59f ] The nvme pci driver had been adding its CMB resource to the P2P DMA subsystem everytime on on a controller reset. This results in the following warning: ------------[ cut here ]------------ nvme 0000:00:03.0: Conflicting mapping in same section WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380 ... Call Trace: pci_p2pdma_add_resource+0x153/0x370 nvme_reset_work+0x28c/0x17b1 [nvme] ? add_timer+0x107/0x1e0 ? dequeue_entity+0x81/0x660 ? dequeue_entity+0x3b0/0x660 ? pick_next_task_fair+0xaf/0x610 ? __switch_to+0xbc/0x410 process_one_work+0x1cf/0x350 worker_thread+0x215/0x3d0 ? process_one_work+0x350/0x350 kthread+0x107/0x120 ? kthread_park+0x80/0x80 ret_from_fork+0x1f/0x30 ---[ end trace f7ea76ac6ee72727 ]--- nvme nvme0: failed to register the CMB This patch fixes this by registering the CMB with P2P only once. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Michael Kelley authored
[ Upstream commit 57f01796 ] IRQ_MATRIX_SIZE is the number of longs needed for a bitmap, multiplied by the size of a long, yielding a byte count. But it is used to size an array of longs, which is way more memory than is needed. Change IRQ_MATRIX_SIZE so it is just the number of longs needed and the arrays come out the correct size. Fixes: 2f75d9e1 ("genirq: Implement bitmap matrix allocator") Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: KY Srinivasan <kys@microsoft.com> Link: https://lkml.kernel.org/r/1541032428-10392-1-git-send-email-mikelley@microsoft.comSigned-off-by:
-
Dave Jiang authored
[ Upstream commit 7756e2b5 ] ndev_vec_mask() should be returning u64 mask value instead of int. Otherwise the mask value returned can be incorrect for larger vectors. Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Tested-by:
Lucas Van <lucas.van@intel.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Jon Mason authored
[ Upstream commit a861594b ] The tx_time should be in usecs (according to the comment above the variable), but the setting of the timer during the rearming is done in msecs. Change it to match the expected units. Fixes: e74bfeed ("NTB: Add flow control to the ntb_netdev") Suggested-by:
Gerd W. Haeussler <gerd.haeussler@cesys-it.com> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 1c124938 ] When there is a PHY, the driver needs to complete some operations through MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from being sent during the hardware reset. Fixes: b50ae26c ("net: hns3: never send command queue message to IMP when reset) Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 6d71ec6c ] The HEAD pointer of the hardware command queue maybe equal to the command queue's next_to_use in the driver, so that does not belong to the invalid HEAD pointer, since the hardware may not process the command in time, causing the HEAD pointer to be too late to update. The variables' name in this function is unreadable, so give them a more readable one. Fixes: 3ff50490 ("net: hns3: fix a dead loop in hclge_cmd_csq_clean") Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 0d441140 ] The current driver supports handling two vector0 interrupts, reset and mailbox. When the hardware reports an interrupt of another type of interrupt source, if the driver does not process the interrupt, but enables the interrupt, the hardware will repeatedly report the unknown interrupt. Therefore, the driver enables the vector0 interrupt after clearing the known type of interrupt source. Other conditions are not enabled. Fixes: cd8c5c26 ("net: hns3: Fix for hclge_reset running repeatly problem") Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 73b907a0 ] When hns3_get_ring_config()/hns3_queue_to_ring()/ hns3_get_vector_ring_chain() failed during resetting, the allocated memory has not been freed before these three functions return. So this patch adds error handler in these functions to fix it. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
-
Jacob Keller authored
[ Upstream commit e330af78 ] VF drivers can trigger PCIe completer aborts any time they read a queue that they don't own. Even in nominal circumstances, it is not possible to prevent the VF driver from reading queues it doesn't own. VF drivers may attempt to read queues it previously owned, but which it no longer does due to a PF reset. Normally these completer aborts aren't an issue. However, on some platforms these trigger machine check errors. This is true even if we lower their severity from fatal to non-fatal. Indeed, we already have code for lowering the severity. We could attempt to mask these errors conditionally around resets, which is the most common time they would occur. However this would essentially be a race between the PF and VF drivers, and we may still occasionally see machine check exceptions on these strictly configured platforms. Instead, mask the errors entirely any time we resume VFs. By doing so, we prevent the completer aborts from being sent to the parent PCIe device, and thus these strict platforms will not upgrade them into machine check errors. Additionally, we don't lose any information by masking these errors, because we'll still report VFs which attempt to access queues via the FUM_BAD_VF_QACCESS errors. Without this change, on platforms where completer aborts cause machine check exceptions, the VF reading queues it doesn't own could crash the host system. Masking the completer abort prevents this, so we should mask it for good, and not just around a PCIe reset. Otherwise malicious or misconfigured VFs could cause the host system to crash. Because we are masking the error entirely, there is little reason to also keep setting the severity bit, so that code is also removed. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Miroslav Lichvar authored
[ Upstream commit 094bf4d0 ] The timecounter needs to be updated at least once per ~550 seconds in order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old timestamp. Since commit 500462a9 ("timers: Switch to a non-cascading wheel"), scheduling of delayed work seems to be less accurate and a requested delay of 540 seconds may actually be longer than 550 seconds. Shorten the delay to 480 seconds to be sure the timecounter is updated in time. This fixes an issue with HW timestamps on 82580/I350/I354 being off by ~1100 seconds for few seconds every ~9 minutes. Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit cec16805 ] device_online() should be called with device_hotplug_lock() held. Link: http://lkml.kernel.org/r/20180925091457.28651-5-david@redhat.comSigned-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by:
Rashmica Gupta <rashmica.g@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Len Brown <lenb@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit 381eab4a ] There seem to be some problems as result of 30467e0b ("mm, hotplug: fix concurrent memory hot-add deadlock"), which tried to fix a possible lock inversion reported and discussed in [1] due to the two locks a) device_lock() b) mem_hotplug_lock While add_memory() first takes b), followed by a) during bus_probe_device(), onlining of memory from user space first took a), followed by b), exposing a possible deadlock. In [1], and it was decided to not make use of device_hotplug_lock, but rather to enforce a locking order. The problems I spotted related to this: 1. Memory block device attributes: While .state first calls mem_hotplug_begin() and the calls device_online() - which takes device_lock() - .online does no longer call mem_hotplug_begin(), so effectively calls online_pages() without mem_hotplug_lock. 2. device_online() should be called under device_hotplug_lock, however onlining memory during add_memory() does not take care of that. In addition, I think there is also something wrong about the locking in 3. arch/powerpc/platforms/powernv/memtrace.c calls offline_pages() without locks. This was introduced after 30467e0b. And skimming over the code, I assume it could need some more care in regards to locking (e.g. device_online() called without device_hotplug_lock. This will be addressed in the following patches. Now that we hold the device_hotplug_lock when - adding memory (e.g. via add_memory()/add_memory_resource()) - removing memory (e.g. via remove_memory()) - device_online()/device_offline() We can move mem_hotplug_lock usage back into online_pages()/offline_pages(). Why is mem_hotplug_lock still needed? Essentially to make get_online_mems()/put_online_mems() be very fast (relying on device_hotplug_lock would be very slow), and to serialize against addition of memory that does not create memory block devices (hmm). [1] http://driverdev.linuxdriverproject.org/pipermail/ driverdev-devel/ 2015-February/065324.html This patch is partly based on a patch by Vitaly Kuznetsov. Link: http://lkml.kernel.org/r/20180925091457.28651-4-david@redhat.comSigned-off-by:
Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit 8df1d0e4 ] add_memory() currently does not take the device_hotplug_lock, however is aleady called under the lock from arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c to synchronize against CPU hot-remove and similar. In general, we should hold the device_hotplug_lock when adding memory to synchronize against online/offline request (e.g. from user space) - which already resulted in lock inversions due to device_lock() and mem_hotplug_lock - see 30467e0b ("mm, hotplug: fix concurrent memory hot-add deadlock"). add_memory()/add_memory_resource() will create memory block devices, so this really feels like the right thing to do. Holding the device_hotplug_lock makes sure that a memory block device can really only be accessed (e.g. via .online/.state) from user space, once the memory has been fully added to the system. The lock is not held yet in drivers/xen/balloon.c arch/powerpc/platforms/powernv/memtrace.c drivers/s390/char/sclp_cmd.c drivers/hv/hv_balloon.c So, let's either use the locked variants or take the lock. Don't export add_memory_resource(), as it once was exported to be used by XEN, which is never built as a module. If somebody requires it, we also have to export a locked variant (as device_hotplug_lock is never exported). Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.comSigned-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
-
Borislav Petkov authored
[ Upstream commit 95c4fb78 ] ... because panic() itself already does this. Otherwise you have line-broken trailer: [ 1.836965] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: pgd_alloc+0x29e/0x2a0 [ 1.836965] ]--- Link: http://lkml.kernel.org/r/20181008202901.7894-1-bp@alien8.deSigned-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 6c9a3f84 ] Currently extent and index i are both being incremented causing an array out of bounds read on extent[i]. Fix this by removing the extraneous increment of extent. Ernesto said: : This is only triggered when deleting a file with a resource fork. I : may be wrong because the documentation isn't clear, but I don't think : you can create those under linux. So I guess nobody was testing them. : : > A disk space leak, perhaps? : : That's what it looks like in general. hfs_free_extents() won't do : anything if the block count doesn't add up, and the error will be : ignored. Now, if the block count randomly does add up, we could see : some corruption. Detected by CoverityScan, CID#711541 ("Out of bounds read") Link: http://lkml.kernel.org/r/20180831140538.31566-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Ernesto A. Fernndez <ernesto.mnd.fernandez@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit 8cd3cb50 ] The vfs takes care of updating mtime on ftruncate(), but on truncate() it must be done by the module. Link: http://lkml.kernel.org/r/e1611eda2985b672ed2d8677350b4ad8c2d07e8a.1539316825.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit dc8844aa ] The vfs takes care of updating ctime and mtime on ftruncate(), but on truncate() it must be done by the module. This patch can be tested with xfstests generic/313. Link: http://lkml.kernel.org/r/9beb0913eea37288599e8e1b7cec8768fb52d1b8.1539316825.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit 1267a07b ] Direct writes to empty inodes fail with EIO. The generic direct-io code is in part to blame (a patch has been submitted as "direct-io: allow direct writes to empty inodes"), but hfs is worse affected than the other filesystems because the fallback to buffered I/O doesn't happen. The problem is the return value of hfs_get_block() when called with !create. Change it to be more consistent with the other modules. Link: http://lkml.kernel.org/r/4538ab8c35ea37338490525f0f24cbc37227528c.1539195310.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit 839c3a6a ] Direct writes to empty inodes fail with EIO. The generic direct-io code is in part to blame (a patch has been submitted as "direct-io: allow direct writes to empty inodes"), but hfsplus is worse affected than the other filesystems because the fallback to buffered I/O doesn't happen. The problem is the return value of hfsplus_get_block() when called with !create. Change it to be more consistent with the other modules. Link: http://lkml.kernel.org/r/2cd1301404ec7cf1e39c8f11a01a4302f1460ad6.1539195310.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit 54640c75 ] Inserting a new record in a btree may require splitting several of its nodes. If we hit ENOSPC halfway through, the new nodes will be left orphaned and their records will be lost. This could mean lost inodes or extents. Henceforth, check the available disk space before making any changes. This still leaves the potential problem of corruption on ENOMEM. There is no need to reserve space before deleting a catalog record, as we do for hfsplus. This difference is because hfs index nodes have fixed length keys. Link: http://lkml.kernel.org/r/ab5fc8a7d5ffccfd5f27b1cf2cb4ceb6c110da74.1536269131.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit d92915c3 ] Inserting or deleting a record in a btree may require splitting several of its nodes. If we hit ENOSPC halfway through, the new nodes will be left orphaned and their records will be lost. This could mean lost inodes, extents or xattrs. Henceforth, check the available disk space before making any changes. This still leaves the potential problem of corruption on ENOMEM. The patch can be tested with xfstests generic/027. Link: http://lkml.kernel.org/r/4596eef22fbda137b4ffa0272d92f0da15364421.1536269129.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit ef75bcc5 ] hfs_brec_update_parent() may hit BUG_ON() if the first record of both a leaf node and its parent are changed, and if this forces the parent to be split. It is not possible for this to happen on a valid hfs filesystem because the index nodes have fixed length keys. For reasons I ignore, the hfs module does have support for a number of hfsplus features. A corrupt btree header may report variable length keys and trigger this BUG, so it's better to fix it. Link: http://lkml.kernel.org/r/cf9b02d57f806217a2b1bf5db8c3e39730d8f603.1535682463.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit 19a9d0f1 ] Creating, renaming or deleting a file may hit BUG_ON() if the first record of both a leaf node and its parent are changed, and if this forces the parent to be split. This bug is triggered by xfstests generic/027, somewhat rarely; here is a more reliable reproducer: truncate -s 50M fs.iso mkfs.hfsplus fs.iso mount fs.iso /mnt i=1000 while [ $i -le 2400 ]; do touch /mnt/$i &>/dev/null ((++i)) done i=2400 while [ $i -ge 1000 ]; do mv /mnt/$i /mnt/$(perl -e "print $i x61") &>/dev/null ((--i)) done The issue is that a newly created bnode is being put twice. Reset new_node to NULL in hfs_brec_update_parent() before reaching goto again. Link: http://lkml.kernel.org/r/5ee1db09b60373a15890f6a7c835d00e76bf601d.1535682461.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Rasmus Villemoes authored
[ Upstream commit ce1091d4 ] For various alignments of buf, the current expression computes 4096 ok 4095 ok 8190 8189 ... 4097 i.e., if the caller has already written two bytes into the page buffer, len is 8190 rather than 4094, because PTR_ALIGN aligns up to the next boundary. So if the printed version of the bitmap is huge, scnprintf() ends up writing beyond the page boundary. I don't think any current callers actually write anything before bitmap_print_to_pagebuf, but the API seems to be designed to allow it. [akpm@linux-foundation.org: use offset_in_page(), per Andy] [akpm@linux-foundation.org: include mm.h for offset_in_page()] Link: http://lkml.kernel.org/r/20180818131623.8755-7-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Rasmus Villemoes authored
[ Upstream commit d9873969 ] Most other bitmap API, including the OOL version __bitmap_shift_right, take unsigned nbits. This was accidentally left out from 2fbad299. Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk Fixes: 2fbad299 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters") Signed-off-by:
Yury Norov <ynorov@caviumnetworks.com> Reviewed-by:
-
Rasmus Villemoes authored
[ Upstream commit 7275b097 ] The static inlines in bitmap.h do not handle a compile-time constant nbits==0 correctly (they dereference the passed src or dst pointers, despite only 0 words being valid to access). I had the 0-day buildbot chew on a patch [1] that would cause build failures for such cases without complaining, suggesting that we don't have any such users currently, at least for the 70 .config/arch combinations that was built. Should any turn up, make sure they use the out-of-line versions, which do handle nbits==0 correctly. This is of course not the most efficient, but it's much less churn than teaching all the static inlines an "if (zero_const_nbits())", and since we don't have any current instances, this doesn't affect existing code at all. [1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dkSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 4b408c74 ] The concern here is that "gup->size" is a u64 and "nr_pages" is unsigned long. On 32 bit systems we could trick the kernel into allocating fewer pages than expected. Link: http://lkml.kernel.org/r/20181025061546.hnhkv33diogf2uis@kili.mountain Fixes: 64c349f4 ("mm: add infrastructure for get_user_pages_fast() benchmarking") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
-
Ming Lei authored
[ Upstream commit c57cdf7a ] rq_qos_exit() removes the current q->rq_qos, this action has to be done after queue is frozen, otherwise the IO queue path may never be waken up, then IO hang is caused. So fixes this issue by moving rq_qos_exit() after queue is frozen. Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 69f8117f ] Use TEST_GEN_PROGS and don't redefine all, this makes the out-of-tree build work. We need to move the extra dependencies below the include of lib.mk, because it adds the $(OUTPUT) prefix if it's defined. We can also drop the clean rule, lib.mk does it for us. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 266bac36 ] For the out-of-tree build to work we need to tell switch_endian_test to look for check-reversed.S in $(OUTPUT). Signed-off-by:
-
Joel Stanley authored
[ Upstream commit 27825349 ] We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests makefile (lib.mk) that those tests are generated (built), and so it adds the $(OUTPUT) prefix for us, making the out-of-tree build work correctly. It also means we don't need our own clean rule, lib.mk does it. We also have to update the signal_tm rule to use $(OUTPUT). Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Joel Stanley authored
[ Upstream commit c39b7908 ] We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests makefile (lib.mk) that those tests are generated (built), and so it adds the $(OUTPUT) prefix for us, making the out-of-tree build work correctly. It also means we don't need our own clean rule, lib.mk does it. We also have to update the ptrace-pkey and core-pkey rules to use $(OUTPUT). Signed-off-by:
-
Joel Stanley authored
[ Upstream commit 9c87156c ] When building with clang (8 trunk, 7.0 release) the frame size limit is hit: arch/powerpc/xmon/xmon.c:452:12: warning: stack frame size of 2576 bytes in function 'xmon_core' [-Wframe-larger-than=] Some investigation by Naveen indicates this is due to clang saving the addresses to printf format strings on the stack. While this issue is investigated, bump up the frame size limit for xmon when building with clang. Link: https://github.com/ClangBuiltLinux/linux/issues/252Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 966c37f2 ] Similiar with ipv6 mcast commit 89225d1c ("net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12.") i) RFC3376 8.12. Older Version Querier Present Timeout says: The Older Version Querier Interval is the time-out for transitioning a host back to IGMPv3 mode once an older version query is heard. When an older version query is received, hosts set their Older Version Querier Present Timer to Older Version Querier Interval. This value MUST be ((the Robustness Variable) times (the Query Interval in the last Query received)) plus (one Query Response Interval). Currently we only use a hardcode value IGMP_V1/v2_ROUTER_PRESENT_TIMEOUT. Fix it by adding two new items mr_qi(Query Interval) and mr_qri(Query Response Interval) in struct in_device. Now we can calculate the switchback time via (mr_qrv * mr_qi) + mr_qri. We need update these values when receive IGMPv3 queries. Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 07d19dc9 ] A deduplication data corruption is exposed in XFS and btrfs. It is caused by extending the block match range to include the partial EOF block, but then allowing unknown data beyond EOF to be considered a "match" to data in the destination file because the comparison is only made to the end of the source file. This corrupts the destination file when the source extent is shared with it. The VFS remapping prep functions only support whole block dedupe, but we still need to appear to support whole file dedupe correctly. Hence if the dedupe request includes the last block of the souce file, don't include it in the actual dedupe operation. If the rest of the range dedupes successfully, then reject the entire request. A subsequent patch will enable us to shorten dedupe requests correctly. When reflinking sub-file ranges, a data corruption can occur when the source file range includes a partial EOF block. This shares the unknown data beyond EOF into the second file at a position inside EOF, exposing stale data in the second file. If the reflink request includes the last block of the souce file, only proceed with the reflink operation if it lands at or past the destination file's current EOF. If it lands within the destination file EOF, reject the entire request with -EINVAL and make the caller go the hard way. A subsequent patch will enable us to shorten reflink requests correctly. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Anton Ivanov authored
[ Upstream commit 917e2fd2 ] This fixes a long standing bug where large amounts of output could freeze the tty (most commonly seen on stdio console). While the bug has always been there it became more pronounced after moving to the new interrupt controller. The line semantics are now changed to have true IRQ write semantics which should further improve the tty/line subsystem stability and performance Signed-off-by:
Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit eaba6878 ] The current IRQ handler clears all the IRQ status bits when it bails out. This is dangerous because it might clear away the status bits that have just been set while processing the current handler. If this happens, the IRQ event for the latest transfer is lost forever. The IRQ status bits must be cleared *before* the next transfer is kicked. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 39226aaa ] Currently, a timeout error could happen at a repeated START condition. For a (non-repeated) START condition, the controller starts sending data when the UNIPHIER_FI2C_CR_STA bit is set. However, for a repeated START condition, the hardware starts running when the slave address is written to the TX FIFO - the write to the UNIPHIER_FI2C_CR register is actually unneeded. Because the hardware is already running before the IRQ is enabled for a repeated START, the driver may miss the IRQ event. In most cases, this problem does not show up since modern CPUs are much faster than the I2C transfer. However, it is still possible that a context switch happens after the controller starts, but before the IRQ register is set up. To fix this, - Do not write UNIPHIER_FI2C_CR for repeated START conditions. - Enable IRQ *before* writing the slave address to the TX FIFO. - Disable IRQ for the current CPU while queuing up the TX FIFO; If the CPU is interrupted by some task, the interrupt handler might be invoked due to the empty TX FIFO before completing the setup. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit f1fdcbbd ] This is unlikely to happen, but it is possible for a CPU to enter the interrupt handler just after wait_for_completion_timeout() has expired. If this happens, the hardware is accessed from multiple contexts concurrently. Disable the IRQ after wait_for_completion_timeout(), and do nothing from the handler when the IRQ is disabled. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
-
